which will not threaten the integrity of the sealing surface of the head. ... Coat the surface liberally with Motorcraft Silicone Gasket Remover (ZC-30). ... Use of power sanding, grinding, and buffing equipment is unauthorized for warranty repairs.
06/10/02 – 10 juin 2002 ENGINE - NEW GASKET REMOVER/CLEANER AND SERVICE TIPS FOR ALUMINUM HEADS AND BLOCKS FORD: 1992-1997 THUNDERBIRD 1992-2002 ESCORT, MUSTANG, TAURUS 1992-2003 CROWN VICTORIA 1995-2000 CONTOUR 2000-2002 FOCUS 2002 THUNDERBIRD 1995-2002 WINDSTAR 1997-2002 E SERIES, EXPLORER, F-150 1997-2003 EXPEDITION 1999-2002 SUPER DUTY F SERIES 2000-2002 EXCURSION 2001-2002 ESCAPE LINCOLN: 1992-2002 CONTINENTAL 1992-2003 TOWN CAR 2000-2002 LS 1998-2003 NAVIGATOR 2002 BLACKWOOD MERCURY: 1992-1997 COUGAR 1992-1999 TRACER 1992-2002 SABLE 1992-2003 GRAND MARQUIS 1995-2000 MYSTIQUE 1999-2002 COUGAR 1993-2002 VILLAGER 1997-2002 MOUNTAINEER ISSUE Gasket removal, especially on multi-layered steel (MLS) head gaskets may leave behind a residue that is difficult to remove from the sealing surface. Effectively immediately, two new cleaning products are released to the field for use in removing gasket and oil residue from aluminum cylinder heads. These products are available and are recommended whenever a cylinder head is removed from the engine. The purpose of these cleaners is. to ensure a safe cleaning process is available which will not threaten the integrity of the sealing surface of the head. ACTION If petroleum residues are left behind neither the MLS gasket nor RTV will adhere to metal and bond properly as designed. In this scenario, a gasket or RTV bead will only act as a "compression" gasket, which is insufficient to seal the area. Preparing the surface with the products listed herein will leave a clean, dry surface in which new replacement gasket can bond with the metal. SERVICE INFORMATION
"Motorcraft Silicone Gasket Remover" (MotorCraft part number, ZC-30) is a softening and loosening agent which attacks RTV and residue left behind by a multi-layered steel gasket. it is packaged in a pliable tube in gel form. It sits on the residue build-up breaking down the bond between the RTV and the metal by working in a more concentrated form.
The second product which is used as a follow up to the Gasket Remover is "Motorcraft Surface Prep" (Motorcraft part number, ZC-31) and is packaged in a small can with applicator brush. This is used as a surface preparation to rid the sealing area of oil, coolant residue and residual RTV before installing the gasket and before RTV is applied to tee-joints. Surface Cleaning And Preparation: This is a crucial step in the success of a head gasket repair. The set-up time to soften RTV will vary, depending on the thickness of the residue left behind. Remove as much of the 'old material as possible with a plastic or wooden scraper. without damaging the aluminum with score marks or depressions. Coat the surface liberally with Motorcraft Silicone Gasket Remover (ZC-30). Allow the softener to act on the remaining residue and remove it with plastic or wood scrapers only. Next, coat the surface with Motorcraft Metal Surface Prep (ZC-31), let sit for several minutes (depending on amount of residue) then wipe clean with a lint-free cloth. This will remove any remaining deposit or residue and prepare the surface to receive RTV and the MLS gasket. Use of power sanding, grinding, and buffing equipment is unauthorized for warranty repairs. Use of manual grinding and scraping aids which include sandpaper, razor blades, or metal scrapers is not authorized. Resurfacing of aluminum machined head gasket surfaces is also unauthorized for repair by Ford Motor Company. Plastic or wood scrapers in conjunction with the new gasket remover and surface preparation products identified in this bulletin are the only products allowed for servicing Ford aluminum cylinder heads. For older engines using composite gaskets it is recommended that a steam application (power steam jenny or dip tank) be directed at the hard residue. This will re-hydrate the material and soften it sufficiently to use a plastic or wood scraper for removal. It is still recommended to apply a coating of ZC-31, Motorcraft Surface Metal Prep, to rid the surface of all coolant and oil residue. RTV and silicone bead gaskets will not bond to the surface if there is a film left behind. OTHER APPLICABLE ARTICLES: NONE WARRANTY STATUS: INFORMATION ONLY OASIS CODES: 401000, 402000, 499000
NOTE : la cause principale des problèmes de pompage est due à une fuite dans la .... (Aucune garantie n'est offerte pour les balais, le rotor ou la came sur les ...
compte de l'élévation au-dessus du niveau de la mer et des pertes dues au frottement. mIsE EN GARdE : Ne pas faire fonctionner la pompe à vide. l'eau est ...
an English Wheel and today we're up to our hips in them. ... form just about anything you could need on an ... tant fact so we'll repeat it because it is the basis for ...
Five years ago you couldn't find a half dozen people in the country who had even heard of an English Wheel and today we're up to our hips in them. One of the ...
to cool it quickly because aluminum doesn't show its heat by changing color. Years ago, I'd heat a large panel in a busy open shop and leave it to cool slowly in ...
By purchasing a few mallets and hammers, making .... English wheel can be used, but a light metal hammer will do the .... involved in sales. He left Kitfox after a.
And Out-Perform. Lam-airâ a company with a ten-year tradition of proven engineering and solid ... That stretching is done by hammering the front down over the shot bag. Don't get the .... is expected to be 320 mph, with a red- line of 500 mph ...
Jan 31, 2003 - would be obtained using the basic treatment. ...... When using filler wire, the wire should contain less than 0.0008 percent beryllium to avoid ...
Jan 8, 1993 - Slip Transition of a Polymer Melt under Shear Stress. K. B. Migler, (a) ... These results are compared to a theoretical model re- cently proposed ...
can be identified in ES cells and be used to directly induce .... (E) Quantitative PCR analysis of pMX retroviral transcription in (1) wild-type MEFs, (2) wild-type ES cells, ...... sham) and Bioprime kit reagents (Invitrogen) from an Xist cDNA tem-.
Jan 8, 2011 - With donkey cart on road, or camels or jalopies from soviet era which transport people from elsewhere to nowhere. From my point of view cities ...
5,16 As the surface tension of PDMS is y=21 ... with an accuracy better than 5%, and measurements on ... M 1.6x109, 1-1.8*10* cm, plusses; silanated wafer,.
and Cryptosporidium spp. in one reaction using species-specific probes. This assay ... mortality in children in the developing world.1 Many studies have been ..... it from Entamoeba dispar (Brumpt 1925). ... Lieshout LV, Polderman AM, 2003.
1 janv. 2007 - ... 23 et, au plus tard, le 1er janvier 2007. Article 26. Le Premier ministre, le garde des sceaux, ministre de la justice, et le ministre de l'outre-mer sont responsables, chacun en ce qui le concerne, de l'application de la présente
the underlying raw aluminum from cor- roding. Unfortunately, aluminum oxide is a very, very good insulator, so if you can't break through that insulating layer.
Some scholars, e.g. Roberts & Roussou (2003), go for a maximalist position and ..... One finds variation in one and the same text, in (nearly) the same environ-. 214 ...... The evolution of English 'dog' is a well-known and illustrative case: it was