Jan 19, 2009 - Water Bottle and its Support ................................................................................................................... 3. Step 1: Water Bottle Geometry: Curve ...
Version 5 Release 19 January 2009 EDU-CAT-EN-DL1-FS-V5R19
CATIA Developed Shapes
Detailed Steps
Table of Contents Water Bottle and its Support ................................................................................................................... 3 Step 1: Water Bottle Geometry: Curve Development ......................................................................... 3 Step 2: Water Bottle Geometry: Create the Reinforcements .............................................................. 4 Step 3: Water Bottle and its Support: Insert a New Part ..................................................................... 6 Step 4: Support Geometry: Create Three Holes and Unfold............................................................... 7 Step 5: Support Geometry: Create an Opening ................................................................................ 10 Step 6: Support Geometry: Unfold the Geometry ............................................................................. 12
COPYRIGHT DASSAULT SYSTEMES
2
CATIA Developed Shapes
Detailed Steps
Water Bottle and its Support Step 1: Water Bottle Geometry: Curve Development • Load Water_bottle_step_01.CATProduct • Double click on Bottle step 01 to activate the CATPart • Click on Develop icon • Configure the option as follow:
COPYRIGHT DASSAULT SYSTEMES
3
CATIA Developed Shapes
Detailed Steps
Step 2: Water Bottle Geometry: Create the Reinforcements • Load Water_bottle_step_02.CATProduct • Create sweep by clicking the sweep icon
• Click on rectangular pattern to duplicate vertically the sweep
Click Reverse if necessary
• Join the Rectangular Pattern and the sweep COPYRIGHT DASSAULT SYSTEMES
4
CATIA Developed Shapes
Detailed Steps
• Trim this join with the revolute
Choose the right side to keep
• Use edge fillet to have the final shape
COPYRIGHT DASSAULT SYSTEMES
5
CATIA Developed Shapes
Detailed Steps
Step 3: Water Bottle and its Support: Insert a New Part • Load Water_bottle_step_03.CATProduct • Load Bottle_support_start.CATPart • Drag and drop the CATPart into the CATProduct.
COPYRIGHT DASSAULT SYSTEMES
6
CATIA Developed Shapes
Detailed Steps
Step 4: Support Geometry: Create Three Holes and Unfold • Load Water_bottle_step_04.CATProduct • Create the sketch on zx plane
and extrude it
• Split the cylinder with this extrusion
• Create the tearing line in a sketch with plane.4 as support
COPYRIGHT DASSAULT SYSTEMES
7
CATIA Developed Shapes
Detailed Steps
• Project the sketch on the surface as a nearest solution.
• Unfold the geometry on plane.2
COPYRIGHT DASSAULT SYSTEMES
8
CATIA Developed Shapes
COPYRIGHT DASSAULT SYSTEMES
Detailed Steps
9
CATIA Developed Shapes
Detailed Steps
Step 5: Support Geometry: Create an Opening • Load Water_bottle_step_05.CATProduct • Create a sketck on yz plane
• Extrude it
• Split the cylinder with the extruded shape
• Create a Parallel Curve. COPYRIGHT DASSAULT SYSTEMES
10
CATIA Developed Shapes
Detailed Steps
• Create a plane.5 offset to Plane.2.
COPYRIGHT DASSAULT SYSTEMES
11
CATIA Developed Shapes
Detailed Steps
Step 6: Support Geometry: Unfold the Geometry • Load Water_bottle_step_06.CATProduct • Unfold the geometry on plane.5 • Select Surface Type as ‘All’.
• Click ‘NO’ for following warning.
COPYRIGHT DASSAULT SYSTEMES
12
CATIA Developed Shapes
Detailed Steps
• Transfer the Parallel.1 on unfolded surface. • Here the ‘Unfolded Surface’ will automatically get selected upon selecting the ‘Surface to unfold’.
Jan 19, 2009 - Developed Shapes. CATIA V5 Training .... a New Part. 5 min. In this step, you will use ASD functionalities to insert a new part in the assembly.
Sep 19, 2008 - Housing part as there is NO conflict between the geometrical and assembly constraint. ...... Calculated in Clash, Clearance, Contact. Yes. No.
Aug 19, 2008 - August 2008 .... Individual case studies are used as building blocks towards the completion of a final .... CATIA V5 is specifically designed for the Windows operating environment, and ..... The documentation may also be installed on a
This software is intended to the children at the first and medium levels of the nursery school, as they are getting familiar with shapes, sizes and colors.
Sep 19, 2008 - CATIA Product Design Expert ... First load all the components from Companion into CATIA V5 and save them ... following assembly constraints:.
photocopying, recording or otherwise, without the express prior written permission of DASSAULT SYSTEMES. This courseware may only be used with explicit.
Sep 19, 2008 - EXERCISE BOOK. Copyright DASSAULT ... CATIA Freestyle ... In this exercise you will create sketches which represent the side and top views.
Sep 19, 2008 - Students attending this course should have knowledge of CATIA ... Common Knowledge Tools Exercises ...... project's design specifications.
Sep 19, 2008 - Use an image as a background or as a basis for design. - Import an .... wireframe elements like points and curves in FreeStyle workbench.
Jan 19, 2009 - Macros Options Interface. 34 ..... This kind of applications can be developed in: ..... It is possible to develop an application in Visual Basic, then.
Sep 19, 2008 - 146. Recap Exercise for Sheet Metal Features. 150. Summary. 151 ...... The DXF file can be imported in CATIA as well as other CAD systems.
