Foyer GENERAL PRODUCT INFORMATION: This product is listed by one of the following “Nationally Recognized Testing Laboratory” These fixtures are intended to be installed utilizing NEC compliant junction boxes.
CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
This product is suitable for dry locations only.
Use minimum 90°c supply conductors.
This product may be dimmed with a standard incandescent dimmer. This instruction shows a typical installation.
1A
2
LAMP
1 STEM
SOCKET
1
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
2
Follow enclosed supplement installation instructions for electrical and fixture installation onto house junction box.
1
1.0
MISE EN GARDE - RISQUE D'INCENDIE Ce produit doit être installé selon le code d’installation pertinent , par une personne qui connaÎt bien le produit et son fonctionnement ainsi que les risques inhérents
Les fils d’alimentation doivent convenir pour 90°c.
1A
2
AMPOULE
1 TIGE
DOUILLE
1
Visser l’ampoules dans les douilles. Reportez-vous à l'étiquette sur la douille de lampe pour obtenir des informations Max Puissance.
2
Suivez les instructions d'installation de suppléments fermés pour l'installation électrique et à un dispositif sur une caisse maison de jonction.
2
ADVERTENCIA - RIESGO DE INCENDIO Este productor debe ser instalado segun el codigo de instalacion aplicable por una persona que conozca la constussion y el funcionamiento del producto y los riesgos que supone.
Conductores de alimentacion 90°c Min.
1A
2
BOMBILLA
1 TALLO
ENCHUFE
1
Atornille las bombillas en los enchufes. Consulte la etiqueta del enchufe de la lámpara para obtener información Max Potencia.
2
Siga las instrucciones de instalación de suplementos cerrados para la instalación eléctrica y el accesorio sobre la caja de conexiones casa.
Colorado Springs 6 Light Foyer. 1.1. F3046-6. Foyer. F3046/6. G. P. I. : ENERAL RODUCT NFORMATION. These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for dry locations only. This product
G. P. I. : ENERAL RODUCT NFORMATION. These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for dry locations only. This product may be dimmed with a standard incandescent dimmer. This instru
Connect the fixture to a suitable ground in accordance with local electrical codes. Connect the white fixture wire to the neutral power line wire with a wire nut.
Colorado Springs 1 Light Pendant. 1.2. P1390. Pendant. P1390. G. P. I. : ENERAL RODUCT NFORMATION. These fixtures are intended to be installed utilizing compliant. NEC junction boxes. This product is safety listed for damp locations. This product may
DeWitt 4 Light Foyer Chandelier. 1.0. F3072-4. Chandelier. F3072/4. G. P. I. : ENERAL RODUCT NFORMATION. These fixtures are intended to be installed ...
F2942-6. Chandelier. F2942/6. Install the candle followers by placing them on top of the ... This product may be dimmed with a standard incandescent dimmer.
Install the candle tubes over each socket. Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information. Install the shades.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire ... G. P. I. : ENERAL RODUCT NFORMATION. These fixtures are intended to be ...
Mark the anchor hole locations on the mounting plate and remove the mounting ... Connect the black fixture wire (round and/or smooth) to the hot power line wire ...
Install the fixture arms by screwing them to the swivels, then secure them to the hub using the washers and couplers. Place the shade onto the shade base and ...
them all in place by screwing the hex nut and fixture loop onto the stem. ... cet ordre), puis fixez-les tout en vissant l'écrou hexagonal et boucle de luminaire sur ...
5. CAUTION RISK OF FIRE. -. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Use minimum 90°c supply conductors. 4. L
F3186-6. Chandelier. F3186/6_. G. P. I. : ENERAL RODUCT NFORMATION. These fixtures ... Refer to the label on the lamp socket for Max Wattage information.