CLD-DS33 REV 2
PRODUCT FAMILY DATA SHEET
Cree® XLamp® XM-L LEDs
PRODUCT DESCRIPTION
FEATURES
The XLamp XM-L LED is the indus-
•
try’s highest performance, singledie white lighting-class LED. XLamp XM-L is 20% more efficient than XLamp XP-G at the same current, and can deliver 1000 lumens with
3000 mA •
Low thermal resistance: 2.5°C/W
•
100 lumens per Watt efficacy. The
Maximum junction
Electrical Characteristics.............. 4 Thermal Design.......................... 4
•
Viewing angle: 125°
dustry-leading features: wide view-
•
Available in warm, neutral and
unlimited floor life and electrically neutral thermal path. XLamp XM-L LEDs can enable LED
cool white •
•
light into new applications that require tens of thousands of lumens,
•
such as high bay and high-output area lighting. XM-L is also the ideal choice for lighting applications where high light output and maximum efficacy are required, such as LED light bulbs, outdoor lighting, portable lighting, indoor lighting and solar-powered lighting.
Relative Flux vs. Current............. 5 Relative Chromaticity vs. Current and Temperature (Cool White)...... 5
ANSI-compatible chromaticity
Relative Chromaticity vs. Current
bins
and Temperature (Warm White).... 6
Unlimited floor life at
Typical Spatial Distribution........... 7
≤ 30ºC/85% RH
Reflow Soldering Characteristics... 8
Reflow solderable JEDEC J-STD-020C
•
Flux Characteristics. 2 Label with Cree .................... Bin Code, Qty, Lot #.......................................2 Characteristics........................... 10 Relative Power Label with Spectral Customer Order Code,... 10 Distribution............................... 3 Qty, Reel ID, PO#. Relative Flux vs. .......................... Junction 10 Temperature.............................. 3
temperature: 150°C
XLamp XM-L LED offers Cree’s ining angle, symmetrical package,
WWW.CREE.COM/XLAMP
Maximum drive current:
TABLE OF CONTENTS
Electrically neutral thermal path
Notes........................................ 9 Mechanical Dimensions..............10 Tape and Reel............................ 9 Packaging.................................10 Label with Cree Bin Code, Qty, Lot #.................................. 10 Label with Customer Order Code,......................................... 10 Qty, Reel ID, PO#...................... 10
Copyright © 2010-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp
XLAMP XM-L LEDS
FLUX CHARACTERISTICS (TJ = 25°C) The following table provides several base order codes for XLamp XM-L LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XM-L Binning and Labeling document.
CCT Range
Color
Min.
Max.
Cool White
5,000 K
8,300 K
Neutral White
3,700 K
5,000 K
Warm White
2,600 K
3,700 K
Base Order Codes Min Luminous Flux @ 700 mA (lm)
Order Code
Group
Flux (lm)
T5
260
XMLAWT-00-0000-0000T5051
T6
280
XMLAWT-00-0000-0000T6051
T4
240
XMLAWT-00-0000-000LT40E4
T5
260
XMLAWT-00-0000-000LT50F4
T2
200
XMLAWT-00-0000-000LT20E7
T3
220
XMLAWT-00-0000-000LT30F7
Notes: • Cree maintains a tolerance of ± 7% on flux and power measurements and ± 2 on CRI measurements . • Typical CRI for Cool White (5,000 K – 8,300 K CCT) is 65. • Typical CRI for Neutral White (3,700 K – 5,000 K CCT) is 75. • Typical CRI for Warm White (2,600 K – 3,700 K CCT) is 80.
CHARACTERISTICS Characteristics
Unit
Thermal Resistance, junction to solder point
°C/W
2.5
degrees
125
Viewing Angle (FWHM) Temperature coefficient of voltage
mV/°C
ESD Classification (HBM per Mil-Std-883D) DC Forward Current
Minimum
Typical
Maximum
-3.0 Class 2
mA
3000
Reverse Voltage
V
5
Forward voltage (@ 700 mA)
V
2.9
Forward voltage (@ 1500 mA)
V
3.1
Forward voltage (@ 3000 mA)
V
3.35
LED Junction Temperature
°C
3.5
150
Copyright © 2010-2011 Inc. All rights reserved. The information this document is subject to change without notice. the logo Cree and logoXLamp and XLamp are registered trade2010 Cree, Cree, Inc. All rights reserved. The information in thisindocument is subject to change without notice. Cree, Cree, the Cree are registered trademarks marks ofInc. Cree, Inc. of Cree,
2
XLAMP XM-L LEDS
RELATIVE SPECTRAL POWER DISTRIBUTION
Relative Radiant Power (%)
100 Relative Spectral Power 80
60
2600K -3700K CCT 3700K - 5000K CCT
40
5000K - 8300K CCT 20
0
400
450
500
550
600
650
700
750
-20
Wavelength (nm)
RELATIVE FLUX VS. JUNCTION TEMPERATURE (IF = 700 MA) 100%
Relative Luminous Flux
90% 80%
70% 60% 50% 40%
30% 20% 10% 0%
25
50
75
100
125
150
Junction Temperature (ºC)
Copyright © 2010-2011 Inc. All rights reserved. The information this document is subject to change without notice. the logo Cree and logoXLamp and XLamp are registered trade2010 Cree, Cree, Inc. All rights reserved. The information in thisindocument is subject to change without notice. Cree, Cree, the Cree are registered trademarks marks ofInc. Cree, Inc. of Cree,
3
XLAMP XM-L LEDS
ELECTRICAL CHARACTERISTICS Electrical Characteristics (Tj = 25ºC) (TJ = 25°C) 3000
2800 2600
Forward Current (mA)
2400 2200 2000
1800 1600 1400 1200 1000
800 600 400 200 0 2.00
2.20
2.40
2.60
2.80
3.00
3.20
3.40
3.60
Forward Voltage (V)
THERMAL DESIGN The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to Cool White ambient in order to optimize lamp life and optical characteristics. 3500
Maximum Current (mA)
3000 2500 2000
1500
Thermal Design 1000
Rj-a = 4°C/W Rj-a = 7°C/W Rj-a = 10°C/W
500
Rj-a = 15°C/W
0
0
20
40
60
80
100
120
140
Ambient Temperature (ºC)
Copyright © 2010-2011 Inc. All rights reserved. The information this document is subject to change without notice. the logo Cree and logoXLamp and XLamp are registered trade2010 Cree, Cree, Inc. All rights reserved. The information in thisindocument is subject to change without notice. Cree, Cree, the Cree are registered trademarks marks ofInc. Cree, Inc. of Cree,
4
XLAMP XM-L LEDS
RELATIVE FLUX VS. CURRENT (TJ = 25°C) 350%
Relative Luminous Flux (%)
325% 300% 275% 250% 225% 200% 175% 150% 125%
100%
75% Typical Spatial Radiation Pattern
50% 25%
0% 0
200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000
Forward Current (mA)
RELATIVE CHROMATICITY VERSUS CURRENT AND TEMPERATURE (COOL WHITE)
Cool White 0.020 0.015 0.010
0.005 0.000 ΔCCx
-0.005
ΔCCy
-0.010
-0.015 -0.020 0
500
1000
1500
2000
2500
3000
Current (mA)
Warm White 0.020 0.015
Copyright © 2010-2011 Inc. All rights reserved. The information this document is subject to change without notice. the logo Cree and logoXLamp and XLamp are registered trade2010 Cree, Cree, Inc. All rights reserved. The information in thisindocument is subject to change without notice. Cree, Cree, the Cree are registered trademarks marks ofInc. Cree, Inc. of Cree,
0.010 0.005
5
XLAMP XM-L LEDS
RELATIVE CHROMATICITY VERSUS CURRENT AND TEMPERATURE (COOL WHITE)
Cool White 0.020
0.015
Cool0.010 White 0.005 0.020 0.000 0.015 -0.005 0.010 -0.010 0.005 -0.015 0.000 -0.020
ΔCCx ΔCCy
-0.005 25
50
75
-0.010
100
125
150
Tsp (°C)
ΔCCx
ΔCCy
-0.015 -0.020
White RELATIVEWarm CHROMATICITY VERSUS CURRENT TEMPERATURE (WARM WHITE) 0 500 1000 1500 AND2000 2500 3000 Current (mA)
0.020 0.015
0.010 Warm White 0.005 0.020 0.000 0.015 -0.005 0.010 -0.010 0.005 -0.015 0.000 -0.020 -0.005 25
ΔCCx
ΔCCy
50
75
-0.010
100
125
150
Tsp (°C)
ΔCCx ΔCCy
-0.015
-0.020 0
500
1000
1500
2000
2500
3000
Current (mA)
Copyright © 2010-2011 Inc. All rights reserved. The information this document is subject to change without notice. the logo Cree and logoXLamp and XLamp are registered trade2010 Cree, Cree, Inc. All rights reserved. The information in thisindocument is subject to change without notice. Cree, Cree, the Cree are registered trademarks marks ofInc. Cree, Inc. of Cree,
6
0.000 ΔCCx
-0.005
ΔCCy
-0.010
-0.015
XLAMP XM-L LEDS
-0.020
25
50
75
100
125
150
RELATIVE CHROMATICITY VERSUS CURRENT AND TEMPERATURE (WARM WHITE)
Tsp (°C)
Warm White 0.020 0.015
0.010 0.005
0.000 ΔCCx
-0.005
ΔCCy
-0.010 -0.015
-0.020 25
50
75
100
125
150
Tsp (°C)
TYPICAL SPATIAL DISTRIBUTION
Relative Luminous Intensity (%)
120
100
80
60
40
20
0
-100
-80
-60
-40
-20
0
20
40
60
80
100
Angle (º)
Copyright © 2010-2011 Inc. All rights reserved. The information this document is subject to change without notice. the logo Cree and logoXLamp and XLamp are registered trade2010 Cree, Cree, Inc. All rights reserved. The information in thisindocument is subject to change without notice. Cree, Cree, the Cree are registered trademarks marks ofInc. Cree, Inc. of Cree,
7
XLAMP XM-L LEDS
REFLOW SOLDERING CHARACTERISTICS In testing, Cree has found XLamp XM-L LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
Profile Feature
Lead-Based Solder
Lead-Free Solder
3°C/second max.
3°C/second max.
Preheat: Temperature Min (Tsmin)
100°C
150°C
Preheat: Temperature Max (Tsmax)
150°C
200°C
60-120 seconds
60-180 seconds
183°C
217°C
60-150 seconds
60-150 seconds
215°C
260°C
10-30 seconds
20-40 seconds
6°C/second max.
6°C/second max
6 minutes max.
8 minutes max.
Average Ramp-Up Rate (Tsmax to Tp)
Preheat: Time (tsmin to tsmax) Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) Peak/Classification Temperature (Tp) Time Within 5°C of Actual Peak Temperature (tp) Ramp-Down Rate Time 25°C to Peak Temperature
Note: All temperatures refer to the topside of the package, measured on the package body surface.
Copyright © 2010-2011 Inc. All rights reserved. The information this document is subject to change without notice. the logo Cree and logoXLamp and XLamp are registered trade2010 Cree, Cree, Inc. All rights reserved. The information in thisindocument is subject to change without notice. Cree, Cree, the Cree are registered trademarks marks ofInc. Cree, Inc. of Cree,
8
XLAMP XM-L LEDS
NOTES Lumen Maintenance Projections Cree currently recommends a maximum drive current of 1500 mA for XLamp XM-L white in designs seeking the ENERGY STAR* 35,000 hour lifetime rating (≥ 94.1% luminous flux @ 6000 hours) or 25,000-hour lifetime rating (≥ 91.8% luminous flux @ 6000 hours). Please read the XLamp Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting. Please read the XLamp Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. * These lifetime ratings are based on the current ENERGY STAR Solid State Lighting Luminaires V1.1 (December 12, 2008) and ENERGY STAR Integral LED Lamps V1.0 (December 3, 2009) lumen maintenance criteria. Moisture Sensitivity In testing, Cree has found XLamp XM-L LEDs to have unlimited floor life in conditions ≤30ºC / 85% relative humidity (RH). Moisture testing included a 168 hour soak at 85ºC / 85% RH followed by 3 reflow cycles, with visual and electrical inspections at each stage. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2010-2011 Inc. All rights reserved. The information this document is subject to change without notice. the logo Cree and logoXLamp and XLamp are registered trade2010 Cree, Cree, Inc. All rights reserved. The information in thisindocument is subject to change without notice. Cree, Cree, the Cree are registered trademarks marks ofInc. Cree, Inc. of Cree,
9
4.8
C
XLAMP XM-L LEDS
MECHANICAL DIMENSIONS All measurements are ±.13 mm unless otherwise indicated.
4.7 3.9 0.6
B
6
5
4
NOTICE 6 CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION 4.7 NOTICE CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT THIS PLOT AND THE INFORMATION CONTAINED WITHINTO ARE THE PROPRIETARY AND MAY NOT BE COPIED, REPRODUCED OR DISCLOSED ANY CONFIDENTIAL OF CREE, INC. THIS PLOT UNAUTHORIZED PERSON WITHOUT THE WRITTENINFORMATION CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY OF CREE INC. UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC.
0.4
3
5
2
4
1 REVISONS
3 REV
2 BY
DESCRIPTION
A
4/15/10 DC DESCRIPTION
REV NEW RELEASE
B
Added die outline A
10/22/1 DDSRELEAS NEW
C
ADDED DIMENSION FOR TOP OF FLASH B
D
3.02 WAS 3.09 C
11/18/1 DC die Added outli
1/5/11T DC ADDED DIMENSION FOR
D
0.4
DATE
3.02 WAS 3.0
D D
3.8
0.4 RECOMMENDED STENCIL PATTERN SHADED AREA IS OPEN
5.00
THIRD ANGLE PROJECTION
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: 5.00 .XX ± .25 .XXX ± .125 X° ± .5 ° FOR SHEET METAL PARTS ONLY .X ± 1.5 .XX ± .75 .XXX ± .25 X° ± .5 °
D. CRONIN
DATE
--
--
--
--
SIZE
FINAL PROTECTIVE FINISH
--
3
Fax (919) 313-5558
A
OUTLINE DRAWING, 5050 XM
MATERIAL
SURFACE FINISH: 1.6
4
0.73 TITLE
--
SCALE
C
2610-00009 SHEET
16.000
0.73
0.5
REV.
DRAWING NO.
2
0.5
0.5
Phone (919) 313-5300
DATE
APPROVED
2.8
0.5
3.02
4600 Silicon Drive Durham, N.C 27703
04/9/10
CHECK
3.8
2.8
3.02
DATE
DRAWN BY
D OF
1 /1
1
5.00
4.8 5.00
C C
Top View
Bottom View
Side View 4.7 3.9
4.8 4.8
3.8
3.8
0.5 0.5
4.7 3.9
0.6 0.6
B B
0.5
4.8
0.4
4.7
0.5
0.4
4.8
0.5
0.4
0.5
2.782
2.782
0.4
0.4
0.4
0.4 UNLESS OTHERWISE SPECIFIED RECOMMENDED STENCIL PATTERN DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. SHADED AREA IS OPEN RECOMMENDED STENCIL PATTERN TOLERANCE UNLESS SPECIFIED: SHADED AREA IS OPEN .XX ± .25
0.4
A
4.7
A RECOMMENDED PCB SOLDER PAD Recommended Solder RECOMMENDED PCB PCB SOLDER PAD
DATE
DRAWN BY
D. CRONIN 04/9/10 UNLESSDATE OTHERWISE SPECIFIED DIMENSIONS ARE IN --MILLIMETERS AND AFTER FINISH. APPROVED DATE TOLERANCE UNLESSTITLE SPECIFIED: .XXX ± .125 --.XX ± .25 X° ± .5 ° .XXX ± .125 FOR SHEET METAL PARTS ONLY MATERIAL X° ± .5 ° THIRD .X ±ANGLE 1.5PROJECTION FOR SHEET METAL PARTS ONLY SIZE .XX ± .75 .X ± 1.5 .XXX ± .25 FINAL PROTECTIVE FINISH .XX ± .75 X° ± .5 ° .XXX ± SCALE .25 SURFACE FINISH: 1.6 X° ± .5 ° 16.000
Pad
CHECK
Recommended Stencil Pattern THIRD ANGLE PROJECTION (Shaded Area Is Open)
--
5 6
4 5
3 4
D. CRONIN --
460 Du
04/9/10Ph DATE
Fa
--
OUTLINE --DRAWING, --
--
6
DATE
DRAWN BY
CHECK
C
DATE
APPROVED
MATERIAL DRAWING NO.
2610-0000 --
FINAL PROTECTIVE FINISH
--
2 SURFACE FINISH: 1.6 3
2
Copyright © 2010-2011 Inc. All rights reserved. The information this document is subject to change without notice. the logo Cree and logoXLamp and XLamp are registered trade2010 Cree, Cree, Inc. All rights reserved. The information in thisindocument is subject to change without notice. Cree, Cree, the Cree are registered trademarks marks ofInc. Cree, Inc. of Cree,
10
SHE
1
XLAMP XM-L LEDS 6
5
4
NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND NOTICE CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION NOTICE MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE UNAUTHORIZED PERSON WITHOUT THEINFORMATION WRITTEN CONSENT CONFIDENTIAL INFORMATION CREE, INC. THIS PLOT CONTAINED WITHIN AREOF THE PROPRIETARY AND OF CREE INC. MAY NOT BE COPIED, INFORMATION REPRODUCEDOF ORCREE, DISCLOSED TO PLOT ANY CONFIDENTIAL INC. THIS UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY OF CREE INC. UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
6
5
6
4
5
3 3
4
3
D
D
3.0°
C
6
3.0°
12.00[.472] 5.50[.217]F NOMINAL 12.00[.472] 12.00[.472] 5.50[.217]F NOMINAL 5.50[.217]F 12.30 [.484] 10.25 NOMINAL MAX [.404] 10.25 12.30 [.484] W E2 12.30 [.484] MAX [.404]10.25 [.404] W MAX E2 W E2
C C
5
3 1.50[.059] D1 1.50[.059] 1.50[.059] D1 D1
4
8.00[.315] P 8.00[.315] 8.00[.315] P P
NOTICE NTIAL. THIS PLOT AND THE INFORMATION THIN ARE THE PROPRIETARY AND INFORMATION OF CREE, INC. THIS PLOT OPIED, REPRODUCED OR DISCLOSED TO ANY D PERSON WITHOUTTHE WRITTEN CONSENT
BY BY
1
DATE
DATE
APP'D
APP'D DATE APP'D
D
AoAo -Bo- 5.40mm [.213"] D - 5.40mm 5.40mm [.213"] [.213"] D All dimensions in mm. BoBo -Ko- 5.40mm [.213"] - 5.40mm 3.35mm [.132"] [.213"] KoKo - - 3.35mm [.132"] 3.35mm [.132"]
+.10 +.0039 Do1.50 .0591 -.00 -.0000 [ ] +.10 +.0039 Do1.50 .0591 +.10 +.0039 -.00 -.0000 [ ] Do1.50 .0591 -.00 -.0000 [ ] 1.75[.069] E1 1.75[.069] 1.75[.069] E1 E1
P2 2.00[.079] 2.00[.079] P2 4.00[.157] P2 Po 4.00[.157] 4.00[.157] Po Po
D
1
POCKET SIZE BY SIZE Ao -POCKET 5.40mm [.213"] POCKET SIZE
REV
OF CREE INC.
2.00[.079]
REVISIONS
2DESCRIPTION REVISIONS REVISIONS DESCRIPTION DESCRIPTION
REV REV
TAPE AND REEL
1
2 2
5.40[.213] Bo 5.40[.213] 5.40[.213] Bo Bo
3.0°
C C
2
C
1
.36[.014] T .36[.014] Loaded pocket count was T 750 .36[.014] T REVISONS
REV
BY
DATE
DDS
11/8/10
DESCRIPTION
A
APP'D
BS
B B
B
7.0°
B
7.0°
5.40[.213] 5.40[.213] 5.40[.213] Ao
END
6
8
A
5
A
NOTICE A CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTANED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT 6 OF CREE INC.
6
Trailer 160mm (min) of empty pockets sealed with tape (15 pockets min.)
D
6
5 5
5
ANODE SIDE Loaded Pockets (1000 Lamps)
B
B
7.0°
3.35[.132] Ko 3.35[.132] 3.35[.132] Ko Ko Ao
D
CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275 CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275 CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275 DATE
DRAWN BY
UNLESS OTHERWISE SPECIFIED 4600 Silicon Drive D. CRONIN 4/23/10 DIMENSIONS ARE IN INCHES Durham, N.C 27703 DATE DRAWN BY CHECK DATE User Feed Direction AND AFTER FINISH. UNLESS OTHERWISE SPECIFIED Phone (919) 313-5300 DATE DRAWN BY 4600 Silicon Drive D. CRONIN 4/23/10 Ao TOLERANCE SPECIFIED: D. CRONIN UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE INUNLESS INCHES Fax (919) 313-5558 Durham, N.C 27703 4600 Silicon Drive 4/23/10 CHECK DATE DIMENSIONS ARE IN INCHES AND AFTER FINISH. .XX ± .01 APPROVED DATE Durham, N.C 27703 4 Phone (919) 313-5300 CHECK DATE TITLE AND AFTER FINISH. .XXXSPECIFIED: ± .005 TOLERANCE UNLESS Phone (919) 313-5300 Fax (919) 313-5558 3.35 1.75 .5 ° APPROVED TOLERANCE UNLESS A .XX ± X° .01± SPECIFIED: DATE Fax (919) 313-5558 CATHODE SIDE THIRD ANGLE PROJECTION START MATERIAL TITLE .XX ± .01 4 2 .XXXSHEET ± METAL .005 DATE FOR PARTS3ONLYAPPROVED TITLE X° ±.XXX A .X .5±±° .005 .06 MATERIAL THIRD ANGLE PROJECTION REV. A DRAWING NO. 2400-00009 X°.XXPARTS ± ± .5 ° SIZE FOR SHEET METAL ONLY .03 THIRD ANGLE PROJECTION MATERIAL FINAL PROTECTIVE FINISH FOR.XSHEET METAL .010ONLY INDEX QTY ITEM COMMENTS ± .XXX .06 ± PARTS REV. DRAWING NO. SIZE .XX .X ± X° ±.03± .06.5 ° REV. NO. SIZE SHEET OF FINISH .XX ± .03 63 FINAL 1SCALE 1 DRAWING 2400-00009-CORE .XXX ± FINISH: .010 C 12 PROTECTIVE SURFACE FINAL PROTECTIVE FINISH DRAWING SCALE 1 /1 X° ±.XXX .5± ° .010 2 2400-00009-REEL SCALE 2 2 SHEET OF1 X° ± .5 ° 3 4 SURFACE FINISH: 63 SCALE SHEET OF / 1 DRAWING SCALE 1 SURFACE FINISH: 63 DRAWING SCALE 1 /1
XM 5050 CARRIER TAPE XMXM 5050 CARRIER TAPE TAPE A 2402-00011 A 5050 CARRIER 2402-00011 A 2402-00011 A
A
4
3
4
2
3
1
A
1
2
1
Leader 400mm (min.) of empty pockets with at least 100mm sealed by tape (40 empty pockets min.)
D
B
12.4 +.2 .0 MEASURED AT HUB
C
C
330 +.25 -.75
16.4 +0.2 .0 MEASURED AT HUB
THIRD ANGLE PROJECTION
6
B
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .25 .XXX ± .125 X° ± .5 ° FOR SHEET METAL PARTS ONLY .X ± 1.5 .XX ± .75 .XXX ± .25 X° ± .5 ° SURFACE FINISH:
5
4
1.6
3
1.9±.4
DATE
DRAWN BY
D. CRONIN CHECK
21 ±.4
4600 Silicon Drive Durham, N.C 27703
06/08/10 DATE
--
Phone (919) 313-5300
--
Fax (919) 313-5558
A
DATE
APPROVED
--
--
MATERIAL
--
TITLE
13.1 ±.2 SIZE
FINAL PROTECTIVE FINISH
--
SCALE
XM LOADING SPEC REV.
DRAWING NO.
C
2402-00012 SHEET
3.000
2
A OF
B
1 /1
1
12.4 +1.0 -.5 MEASURED AT EDGE 60°
60°
REVISONS REV Cree BY DATE APP'D Copyright © 2010-2011 Inc. All rights reserved. The information this document is subject to change without notice. the logo Cree and logoDESCRIPTION and XLamp are registered trade2010 Cree, Cree, Inc. All rights reserved. The information in thisindocument is subject to change without notice. Cree, Cree, the XLamp are registered trademarks marks ofInc. Cree, Inc. of Cree,
A
THIRD ANGLE PROJECTION
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .01 .XXX ± .005 X° ± .5 °
DRAWN BY
D. CRONIN CHECK
DATE
4600 Silicon Drive Durham, N.C 27703
09/29/09
11
DATE
-APPROVED
-MATERIAL
Phone (919) 313-5300
--
Fax (919) 313-5558
DATE
--
TITLE
REEL, 13" X 12MM, 3 PIECE SNAP
A
Dessicant Desiccant XLAMP XM-L LEDS (inside bag) (inside bag) Humidity Indicator Humidity Indicator Card (inside bag)bag) (inside PACKAGING
Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag
Label Bin with Cree Bin CREE Code & Barcode Label Code, Qty, Lot # Label CREE Binwith Code Cree Bin & Barcode LabelLot # Code, Qty,
Label with Cree Bin Label with Customer P/N, Qty, Lot #, PO## Code, Qty, Lot Label with Cree Bin Label with Customer P/N, Qty,Qty, Lot #, Lot PO # # Code,
Patent Label Patent Label
Label with Customer Order Code, Qty, Reel ID, PO # Label with Customer Order Code, Qty, Reel ID, PO #
Label with Customer Order Code, Qty, Reel ID, PO#
Label with Cree Bin Code, Qty, Lot #
Copyright © 2010-2011 Inc. All rights reserved. The information this document is subject to change without notice. the logo Cree and logoXLamp and XLamp are registered trade2010 Cree, Cree, Inc. All rights reserved. The information in thisindocument is subject to change without notice. Cree, Cree, the Cree are registered trademarks marks ofInc. Cree, Inc. of Cree,
12
