Design and Implementation of HP SIM and HP Insight Control Number: HP0-S30 Passing Score: 750 Time Limit: 218 min File Version: 1.0 These are the characteristics of this exam...: - Number of items: 60+ (aprox.) - Item types: single choice, multiple choice, drag-and-drop, hot area (point-and-click) - Exam time: 90 minutes - Passing score: 75% Go for 100% anyway...! ;-) The exam is built to the best of my abilities, but I DID NOT wrote the questions. I've only translated the source PDF to the VCE format. So, please, don't ask for corrections or additions, because I will not be able to verify your suggestions. And to be honest, I don't care about one or two incorrect answers, if the vast majority are OK and I pass... I hope this is fair enough for you. Have fun!
Exam A QUESTION 1 You received an SNMP Authentication trap, but did not receive a notification in HP Systems Insight Manager (HP SIM). What could cause this? A. B. C. D.
The default setting for Enabling Trap Handling in SNMP extensions was disabled in HP SIM. The trap received was not sent from a managed node that is in the authorized list. A filter was set in the discovery task to ignore these authentication traps by default. A trust relationship was not established between HP SIM and the managed node sending the trap.
Answer: A Section: (none)
QUESTION 2 HP Systems Insight Manager (HP SIM) indicates a minor degraded state on a managed system. You investigate further by clicking on the Hardware status (HW) link. HP SIM should launch another page with the System Management Home (SMH). Instead, a "Page not found" message displays. What can cause this issue? A. A firewall is configured on the target managed node that prevents port 50000 from communicating with HP SIM. B. The system is no longer available or the system is down and HP SIM has not yet updated the minor status to critical status. C. HP SIM is referencing the Fully Qualified Domain Name (FQDN) when launching the SMH and cannot resolve the IP to the FQDN. D. The community strings do not match between HP SIM and the target managed node and therefore cannot display the SMH. Answer: C Section: (none)
QUESTION 3 What must you consider regarding the central management server (CMS) when managing a Windows environment with HP Systems Insight Manager (HP SIM)? A. Timeout values for processing WMI information from Windows-based systems might need to be changed on the CMS. B. All systems being managed must have a trust relationship with the CMS for single sign-on (SSO). C. There must be a WMI Mapper installed on the CMS or on another server on the network. D. All Windows-based systems must be in the same domain as the CMS. Answer: C Section: (none)
QUESTION 4 What must you consider when configuring community strings? A. B. C. D.
They must be unique to each system that is being managed. HP SIM and managed systems must have matching community strings. The community strings must not be more than eight characters long. All systems must be configured with a write community string.
Answer: B Section: (none)
QUESTION 5 You noticed that a system that was being monitored by Insight Control performance management has a critical status in the PF column. However, the HW status displays as "normal". What could cause this to occur? A. B. C. D.
The HP management agents have been downgraded. Network teaming was enabled on the managed server. Performance monitoring was disabled in HP SIM for that managed server. The license was removed from that managed server within HP SIM.
Answer: A Section: (none)
QUESTION 6 What is a good indicator that Insight Control performance management has not been installed with HP SIM? A. B. C. D.
The status of the managed devices under the HW column shows "unknown" status. The system table view does not show a PF column. The System Management Homepage does not display any performance information. The Tool menu in HP SIM does not display any performance management options.
Answer: B Section: (none)
QUESTION 7 When performing a remote installation of Insight Remote Support, you receive an error stating that the install cannot proceed. What can cause this issue? A. A SIMadmin user with administrative privileges is not performing the installation. B. The installation requires that FTP be installed on the remote server before installing Insight Remote Support. C. The installation initiated from a Microsoft Remote Desktop (RDP) session that does not have the active desktop session. D. The installation requires that you run Insight Software Advisor, which launches the full installation of Insight Control. Answer: C Section: (none)
QUESTION 8 Click the Task button. Match the type of collection available in HP SIM with its characteristic.
Answer:
Section: (none)
Explanation/Reference:
QUESTION 9 What happens when an event is generated that affects an entire rack or enclosure? A. Several systems within the rack or enclosure can generate a trap, but they are filtered by HP SIM to only show one event per rack or enclosure. B. Multiple traps are received by HP SIM and can cause multiple events to trigger multiple notification alerts. C. An alert is logged for each server associated with the enclosure, but the same event increases a counter each time the same trap is received. D. Traps are received from a server, but they are not associated with the enclosure and are managed independently. Answer: A Section: (none)
QUESTION 10 What should you do when enabling the WMI Mapper in HP Systems Insight Manager (HP SIM)? A. B. C. D.
Run the identification task to properly identify systems that are running WMI. Run the software polling task to return WMI information for managed systems. Rerun the discovery task to discover systems that are running WMI. Run a hardware polling task to get status information in WMI instrumented devices.
Answer: A Section: (none)
QUESTION 11 How many agents are there in the HP Insight Management Agents family? A. B. C. D.
one monolithic agent for all devices four: a server, NIC, storage, and foundation agent five: a server, NIC, storage, foundation, and Version Control Agent six: a server, NIC, storage, foundation, client, and Version Control Agent
Answer: C Section: (none)
QUESTION 12 Which type of component is considered part of the HP Systems Insight Manager (HP SIM) management domain? A. B. C. D.
central management server (CMS) network client any third-party device any management information base (MIB) compiled device
Answer: A
Section: (none)
QUESTION 13 Which feature of HP Systems Insight Manager (HP SIM) enables you to view contract and warranty information for managed systems? A. B. C. D.
ProLiant Essentials Integrity Essentials Storage Essentials Enterprise Suite Service Essentials Remote Support Pack
Answer: D Section: (none)
QUESTION 14 How much can HP Systems Insight Manager (HP SIM) 6.X scale? A. B. C. D.
HP SIM can manage 2,500 operating system instances. HP SIM can manage 5,000 physical and virtual machines plus supporting iLOs and OAs. HP SIM can manage 10,000 physical and virtual machines. HP SIM is limited by the amount of memory on the central management server (CMS).
Answer: B Section: (none)
QUESTION 15 From which components do the Insight Foundation Agents collect data in order to provide management information to HP SIM? (Select two.) A. B. C. D. E.
operating system system drivers management host serial and parallel ports memory subsystem
Answer: AC Section: (none)
QUESTION 16 HP Systems Insight Manager (HP SIM) can be hosted on which operating environments? (Select three.) A. B. C. D. E. F.
HP-UX Linux OVMS Windows Solaris AIX
Answer: ABD
Section: (none)
QUESTION 17 What is the default view of the BladeSystem page in BladeSystem Integrated Manager? A. B. C. D.
Icons Location Table Tree
Answer: D Section: (none)
QUESTION 18 What type of information displays when you place your cursor over a server blade graphic in the HP SIM picture view? (Select two.) A. B. C. D. E.
server name slot or bay number contact information rack location server role
Answer: AB Section: (none)
QUESTION 19 What should you consider when monitoring devices using the DMI protocol? A. Only systems that have event indication subscriptions configured in HP Systems Insight Manager (HP SIM) are managed by DMI. B. Only desktops and workstations communicating with the central management server (CMS) are identified by the DMI protocol. C. To be identified by DMI, managed systems running Windows or HP-UX must run the same operating system as the CMS. D. A Management Information File (MIF) must be compiled in HP SIM for each device model being managed by the DMI protocol. Answer: C Section: (none)
QUESTION 20 What must you enable before performing an offline analysis with Insight Control performance management? (Select two.) A. B. C. D.
Alerting Discovery Logging Monitoring
E. Reporting Answer: CD Section: (none)
QUESTION 21 Before HP Systems Insight Manager (HP SIM) can gather performance data from a managed node, what must occur regarding the managed node? (Select two.) A. B. C. D. E.
It must have a matching community string with HP SIM. It must be running Windows Management Instrumentation (WMI). It must be licensed for management by HP SIM. It must be enabled for monitoring by HP SIM. It must have a management account created in HP SIM.
Answer: CD Section: (none)
QUESTION 22 Which systems are included in the BladeSystem Integrated Manager view? A. B. C. D.
e-Class enclosures HP 9000 servers EVA 6100 storage Integrity rx4400 servers
Answer: A Section: (none)
QUESTION 23 Which HP software can you use to assess potential bottlenecks on an HP StorageWorks MSA solution? A. B. C. D.
Insight performance management Insight Diagnostics Insight vulnerability and patch management Systems Management Homepage
Answer: A Section: (none)
QUESTION 24 Click the Task button. Match the Storage Essentials product with its description.
Answer:
Section: (none) Explanation/Reference:
QUESTION 25 What must occur for HP Systems Insight Manager (HP SIM) to manage a storage system with SMI-S?
A. B. C. D.
The SMI-S protocol needs to be enabled in HP SIM. HP SIM and Storage Essentials must be installed together. HP SIM needs a WMI Mapper to translate the SMI-S to true WBEM. A SMI-S provider must be installed on a server that is attached to the storage systems.
Answer: D Section: (none)
QUESTION 26 What is the default number of samples required to determine the performance status of an HP StorageWorks MSA? A. B. C. D.
2 3 4 5
Answer: D Section: (none)
QUESTION 27 Which operating systems are supported by Insight Version Control? (Select two.) A. B. C. D. E.
Linux HP-UX Windows VMware ESX Windows VMs
Answer: AC Section: (none)
QUESTION 28 When you are configuring the Version Control Agents (VCA) on a managed system, what must occur in order to select a Reference Support Pack? A. B. C. D.
A baseline Support Pack must be configured in Version Control Repository Manager (VCRM). VCA must catalog the referencing VCRM in order to view the Support Packs available in the repository. A trust relationship must be established between VCA and VCRM to view the available Support Packs. The referencing Version Control Repository Manager must be populated with a valid Support Pack.
Answer: D Section: (none)
QUESTION 29 Which HP components work together to provide driver and firmware management? (Select two.) A. Systems Management Homepage
B. C. D. E.
Version Control Agent Foundation Agent Version Control Repository Manager Systems Insight Manager
Answer: BD Section: (none)
QUESTION 30 What should you consider when running reports based on events? A. B. C. D.
Use event filters to narrow down the list of events. Limit the report to 100 items for faster response time. Separate the events into categories for better readability. Create a collection of the event first, and then run the report against the collection.
Answer: A Section: (none)
QUESTION 31 Who can run reports in HP Systems Insight Manager (HP SIM)? A. B. C. D.
users with full configuration rights users with limited configuration rights users who can log in to HP SIM users who belong to the reports group
Answer: C Section: (none)
QUESTION 32 Which types of reports can Insight Power Manager provide? (Select two.) A. B. C. D. E.
executive summary view graph view thresholds report view printer friendly view table view
Answer: BE Section: (none)
QUESTION 33 Which statement is true about HP SIM reports? A. Open reports can show dynamic live data. B. You can run a report on a system collection. C. Custom reports can combine pre-defined reports together.
D. You cannot combine a system collection and an event collection to run a report. Answer: B Section: (none)
QUESTION 34 On which HP server can you install HP SIM and Insight Remote Services Advanced? A. B. C. D.
Integrity rack-mount series ProLiant BL BladeSystem Integrity BL BladeSystem ProLiant DL100 series
Answer: B Section: (none)
QUESTION 35 Which operating systems require installation of HP Systems Insight Manager (HP SIM) from a command line? (Select two.) A. B. C. D. E.
Linux OVMS HP-UX 11i Windows Sun Solaris
Answer: AC Section: (none)
QUESTION 36 What must a user do before logging in to HP Systems Insight Manager (HP SIM)? (Select two.) A. B. C. D. E.
Create a special account named "SIMadmin" under a Windows local account. Install the security certificate into the client browser. Create an account in Active Directory or on the local CMS that has Administrator privileges. Establish a trust relationship between the CMS and the client station that is being used for login. Log in to HP SIM as Administrator and add management users to the Authorized users list.
Answer: CE Section: (none)
QUESTION 37 Which tab is automatically added to the System page when optional software is integrated with HP Systems Insight Manager (HP SIM)? A. B. C. D.
Insight Remote Services Storage Essentials BladeSystems Integrated Manager Insight virtual machine management
Answer: B Section: (none)
QUESTION 38 Click the Exhibit button. You are logged in to the System Management Homepage (SMH) and notice a long community string such as the one shown in the exhibit. Why was this community string placed in this SNMP configuration? Exhibit:
A. When the ProLiant Support Pack installs the Insight Agents, this unique community string is generated randomly. B. A Configure or Repair Agents task was run against this server and HP SIM generated a unique SNMP community string to manage this system. C. This number was added manually by a network administrator to provide a more complex security policy for SNMP communications. D. This is an IEEE number that is unique for each server manufacturer; the string in the exhibit is the number assigned to HP servers. Answer: B Section: (none) Explanation/Reference:
QUESTION 39 What is one way that HP Systems Insight Manager (HP SIM) discovers a device? A. B. C. D.
An adjacent node notifies HP SIM of any nodes that it has discovered. A discovered node sends an SMTP message to HP SIM. A managed node is in the IP range of the HP SIM discovery task. A managed node sends a broadcast when instrumented with Insight management agents.
Answer: C Section: (none)
QUESTION 40
Click the Task button. Match the data center function with the Insight Software suite that enables it.
Answer:
Section: (none)
Explanation/Reference:
QUESTION 41 The functionality of iLO that is available to the user can vary. What does that functionality depend on? (Select two.) A. B. C. D.
the iLO specific license the iLO family processor the HP SIM plug-ins enabled the Insight Control license applied to HP SIM
Answer: AB Section: (none)
QUESTION 42 Insight Control power management takes advantage of a p-state function in the server processor. What does the p-state allow for at the processor level? (Select two.) A. Raising the p-state gives a processor a higher processing priority than other processors. B. The p-state can set a power threshold and generate an alert when the threshold is exceeded on the processor. C. The p-state can cause the processor to operate at a lower frequency. D. The p-state can stop and start the processor completely. E. The p-state can cause the processor to operate at a lower voltage. Answer: CE Section: (none)
QUESTION 43 How does Insight Control performance management gather performance information? A. B. C. D.
It uses WMI and Windows performance counters. It uses the WSMan protocol. It uses HP Insight Agents and SNMP. It leverages Altiris ADL agents.
Answer: C Section: (none)
QUESTION 44 Which type of installation can be performed with Insight Control server deployment? (Select two.) A. B. C. D. E.
an image install to a new server a scripted install to a new server a replication of a fully installed server to a new server an assisted migration from a physical server to a virtual server agent configuration or repair from a source to a target server
Answer: AB Section: (none)
QUESTION 45 After a server PXE boots, which preboot environments are offered by the Deployment Server? (Select two.) A. B. C. D. E.
DOSPE WinCE WinXP LinuxPE WinPE
Answer: DE Section: (none)
QUESTION 46 Click the Task button. Match the agent with the environment that it runs.
Answer:
Section: (none) Explanation/Reference:
QUESTION 47 What is the function of the Deployment Share? A. B. C. D.
It stores installation and error logs for troubleshooting failed installations. It stores Insight Deployment software files. It hosts web pages that are rendered when using the Deployment Server Web Console. It provides a repository of ISO and image files for virtual server deployment.
Answer: B Section: (none)
QUESTION 48 What is the function of the RDP HP SIM Integration Module? A. B. C. D.
It consolidates the HP SIM console and the Deployment Console into one easy-to-use interface. It consolidates the Deployment Server and the HP SIM databases into one database. It enables the Deployment Console to list servers that are discovered by HP SIM. It enables you to use the Deployment Wizard to schedule jobs on servers selected in the HP SIM console.
Answer: D Section: (none)
QUESTION 49 Insight Control server deployment software contains preconfigured scripts for hardware configuration. Which hardware configuration job can capture information? A. B. C. D.
Capture Firmware BIOS Capture iLO Configuration Get Memory Configuration Get Integrity Drive Configuration
Answer: D Section: (none)
QUESTION 50 What should you consider when installing Insight Control server deployment software? A. B. C. D.
The web-based console is not supported on an x64 operating system. The WinPE environment is only runs in 32-bit mode. The LinuxPE environment cannot be used to configure a ProLiant server. Insight Control server deployment and HP SIM cannot reside on the same central management server (CMS).
Answer: A
Section: (none)
QUESTION 51 What happens when the Deployment Server database is installed on a server that already has a Microsoft SQL database installed? A. B. C. D.
The existing database is overwritten with the new Deployment Server database. You are prompted that an existing database already exists and to uninstall it first before proceeding. You are prompted for a remote location on the network to install the Deployment Server database. The Deployment Server database is added to the existing SQL database.
Answer: D Section: (none)
QUESTION 52 You are running HP Insight Software Advisor, which indicates that Microsoft Internet Information Services (IIS) and FTP services should be installed before proceeding with the install of Insight Control. Why are FTP services required on the central management server (CMS)? A. HP Version Control Agents (VCA) use FTP to push HP Support Packs to managed systems. B. HP Insight Remote Support Services uses FTP to relay logs and alerts to HP technical support. C. HP Systems Insight Manager (HP SIM) requires FTP for configuring and repairing agents on targeted systems. D. HP Insight Control server deployment uses FTP to host files on servers that PXE boot and deploy an ESX or Linux environment. Answer: D Section: (none)
QUESTION 53 Which statement is true about Insight Control server deployment? A. Insight Control server deployment and SQL Server are configured and installed as part of the Insight Control suite. B. WinPE and LinuxPE are installed automatically during an Insight Control server deployment install. C. If you are using Insight Control server deployment and HP SIM, they must be installed with the same SQL Server database in order to integrate with each other. D. The SmartStart scripting toolkit must be installed manually after Insight Control installs the Altiris server deployment service. Answer: A Section: (none)
QUESTION 54 Which services are required by Insight Control server deployment? (Select three.) A. B. C. D.
SNMP FTP WMI DHCP
E. IIS Web Server F. DNS Answer: BEF Section: (none)
QUESTION 55 What should you consider when installing or upgrading HP Insight Control performance management software? (Select two.) A. HP SIM 6.0 or later should already be installed before installing performance management. B. HP SIM and Insight Control performance management establish a trust relationship by exchanging certificate keys. C. HP Insight Control performance management 6.0 uninstalls previous installations. D. HP Insight Control performance management updates the Insight Agents. E. HP Insight Control performance management can be installed on a server separate from the central management server (CMS). Answer: AC Section: (none)
QUESTION 56 A user wants to install a Deployment Agent manually to a managed system. How can you securely provide access to the agent installation program for this user? A. B. C. D.
Copy the Agents folder on the Deployment Share to a location the user can access. Add the Agents folder to the user's profile. Create a job in Server Deployment Console to push the Agents folder to the user's local hard drive. Grant the user direct rights to the Deployment Share.
Answer: A Section: (none)
QUESTION 57 How can you minimize the exposure of a spoofing PXE server? A. B. C. D.
by encrypting the messages between the DHCP server, the PXE server, and the client by setting PXE last in the boot order on the server by removing support for Boot Integrity Services (BIS) from the PXE server by configuring BIS on the PXE server NICs
Answer: B Section: (none)
QUESTION 58 Which function does role-based security provide within HP SIM? A. limits on the visibility of public collections to certain users B. access to certain manageability tools for specific managed systems or groups
C. the ability to grant different levels of access to management processors D. the ability to create a hierarchical structure of privileges given to administrative groups Answer: B Section: (none)
QUESTION 59 What should you do when configuring the NIC on an Insight Control server deployment server? A. B. C. D.
Bind DHCP only to the network that will be providing the PXE service. Provide NIC teaming for best performance of deployment scripts. Enable DHCPv6 for both NICs on the deployment server. Present the PXE service in the deployment console to both NICs.
Answer: A Section: (none)
QUESTION 60 When should you consider installing the RDP HP SIM Integration Module? A. B. C. D.
when you are installing the Insight Dynamics suite when you are installing HP SIM and Deployment Server on separate servers when HP SIM and Deployment Server do not use the same SQL Server database when you want HP SIM to list undeployed servers that are discovered by the Deployment Server
Answer: D Section: (none)
QUESTION 61 When would you want to create virtual bays in Deployment Server? A. when you want to present configuration properties for new systems before they are recognized by the deployment server. B. when you anticipate that the server name will change in the operating system and you want the deployment Server to reflect the change when it happens. C. when a server is going to be deployed and it is booting from SAN (BFS). D. when the target server is going to be deployed with a hypervisor and will host many virtual machines (VMs). Answer: A Section: (none)
QUESTION 62 Which users can read archived audit log files from HP Systems Insight Manager (HP SIM)? A. B. C. D.
users with full configuration rights in HP SIM. users with login privileges in HP SIM. users with audit privileges in HP SIM. users with root or administrator privileges to the CMS server.
Answer: D Section: (none)
QUESTION 63 What happens when the audit log file reaches its maximum limit in HP Systems Insight Manager? (Select two.) A. B. C. D. E.
The log file will stop logging the information that is collected. The log file is renamed by the Audit Log Manager. The log file begins writing over logs, beginning with the oldest first. On a second rollover, a new backup file replaces the previous backup file. An archiving script is run and backs up the logs to a user-defined location.
Answer: BD Section: (none)
QUESTION 64 In HP Systems Insight Manager, how do you change the characteristics of the Audit log? A. B. C. D.
by selecting Option --> Events --> Check Event Configuration by selecting Configure --> Manage System Setup Wizard by editing the log.properties file by editing the HPSIM.log file
Answer: C Section: (none)
QUESTION 65 What happens when Storage Essentials integrates with HP Systems Insight Manager (HP SIM)? A. B. C. D.
HP SIM storage list and reports are unavailable. Storage Essentials retrieves management information from HP SIM. HP SIM retrieves management information from Storage Essentials. HP SIM and Storage Essentials populate each other's database with management information from their respective collection.
Answer: A Section: (none)
QUESTION 66 What is unique about HP SIM managing storage systems? A. B. C. D.
HP SIM uses WBEM and SMI-S to manage them. HP SIM does not manage third-party storage products. HP SIM can upgrade the firmware on HP storage products. HP SIM can manage a storage product even if it is not attached to a server.
Answer: A
Section: (none)
QUESTION 67 What must you consider when monitoring the performance of a network storage enclosure? (Select two.) A. B. C. D. E.
The enclosure must be connected to a server that is also being monitored by HP SIM. The SMI-S protocol must be configured and enabled in HP SIM. The WS-MAN protocol must be configured and enabled in HP SIM. The enclosure must be licensed. The enclosure must be WBEM compliant.
Answer: AD Section: (none)
QUESTION 68 In HP SIM, tasks are performed on groups of similar objects. What are the criteria that define these groups? A. B. C. D.
System or Event collections Single System Aware (SSA) managed systems Multiple System Aware (MSA) managed systems Received alerts
Answer: A Section: (none)
QUESTION 69 Click the Task button. Click the area of the graphic that enables you to create a personal collection.
Answer:
Section: (none) Explanation/Reference:
QUESTION 70 Click the Task button. Match the type of collection available in HP SIM with its characteristic.
Answer:
Section: (none)
Explanation/Reference:
QUESTION 71 What are two possible reasons that a managed server would show an unknown status in the PF column of HP SIM? (Select two.) A. B. C. D. E.
The server is not licensed. The polling timeout values need to be increased. The system needs to be re-identified. A hardware polling task has not run. The server is not marked for monitoring.
Answer: AE Section: (none)
QUESTION 72 What should you consider when troubleshooting performance issues with HP Systems Insight Manager (HP SIM) running on a virtual machine (VM)? A. B. C. D.
The central management server (CMS) cannot be managed from HP SIM when it is installed on a VM. Access to the HP SIM console is limited to local access. The HP SIM management domain is limited to approximately 1,000 nodes. Out-of-band management is not permitted when HP SIM is installed on a VM.
Answer: C Section: (none)
QUESTION 73 Click the Exhibit button. Why do the two System Management Homepages in the exhibit show different settings options? Exhibit:
A. The server that displays more options has a trust relationship with HP SIM. B. The server that displays fewer options is running SNMP-based agents only. C. The server that displays fewer options needs a firmware upgrade to provide full functionality.
D. The server that displays fewer options has different security settings for the user that is logged in. Answer: B Section: (none) Explanation/Reference:
QUESTION 74 What is required for the Managed Systems Setup Wizard (MSSW) to function properly? A. B. C. D.
WMI Mapper Insight Control License SQL Client Adobe Flash
Answer: D Section: (none)
QUESTION 75 When you are using the Managed Systems Setup Wizard to configure Secure Shell (SSH) on a target server, what must you consider? A. B. C. D.
Initial SSH configuration failure on iLO is a normal and expected condition. The private key must be pushed to the target system. Exchange of SSH keys with the CMS enables single sign-on (SSO) functionality. You do not need to install SSH on a Windows server because it ships with Windows by default.
Answer: A Section: (none)
QUESTION 76 HP Systems Insight Manager (HP SIM) indicates a minor degraded state on a managed system. You investigate further by clicking on the Hardware status (HW) link. HP SIM should launch another page with the System Management Home (SMH). Instead, a "Page not found" message displays. What can cause this issue? A. A firewall is configured on the target managed node that prevents port 50000 from communicating with HP SIM. B. The system is no longer available or the system is down and HP SIM has not yet updated the minor status to critical status. C. HP SIM is referencing the Fully Qualified Domain Name (FQDN) when launching the SMH and cannot resolve the IP to the FQDN. D. The community strings do not match between HP SIM and the target managed node and therefore cannot display the SMH. Answer: C Section: (none)
QUESTION 77 What is the correct URL to access the System Management Homepage (SMH) of a managed node?
A. B. C. D.
http://localhost/2301 https://localhost:2301 http://localhost/2381 https://localhost:2381
Answer: D Section: (none)
QUESTION 78 What must you consider when managing iLOs with HP Systems Insight Manager (HP SIM)? A. B. C. D.
A special identification task must be scheduled to properly manage iLOs. HP SIM must have system credentials configured with a user name and password that access the iLOs. All iLOs must have a statically assigned IP address in order to log in from the HP SIM console. Integration must be configured between Windows Active Directory and the iLOs for proper access to the iLOs.
Answer: B Section: (none)
QUESTION 79 You want to view port mapping/mezzanine card information for a BladeSystem enclosure. How can you view this information? A. In BladeSystems Integrated Manager, view a server blade System page; then click the Port Mapping/ Mezzanine tab. B. Launch Web Administration from the iLO management processor of a server blade in the enclosure; then click the BL c-Class tab. C. From any server blade in the enclosure, log in to the System Management Homepage (SMH) and click the Port Mapping/Mezzanine tab. D. Run a report in HP Systems Insight Manager (HP SIM) for port mapping and mezzanine cards. Answer: A Section: (none)
QUESTION 80 How do you access BladeSystem Integrated Manager in HP SIM from a central management server (CMS)? A. B. C. D.
At a command prompt, enter mxblades. Select Tools --> Integrated Consoles --> HP BladeSystem. Select Reports --> HP BladeSystem. Select Options --> Discovery --> HP BladeSystem.
Answer: B Section: (none)
QUESTION 81 What must occur for an Offline Analysis session to display data in HP SIM?
A. B. C. D.
Logging must be enabled in HP SIM for the target node. A scheduled task must be created manually to collect data. Alerting must be enabled in HP SIM for the target node. A license must be applied to enable the Offline Analysis feature.
Answer: A Section: (none)
QUESTION 82 When associations are made in HP SIM between the BladeSystem iLO and the enclosure, what does the association format look like under the System Name column? A. B. C. D.
iLO name in Enclosure name Server name_system serial number in Enclosure name Server name_iLO name in Enclosure name Server_system serial number in Enclosure name
Answer: D Section: (none)
QUESTION 83 How is managing a BladeSystem enclosure different from managing other server environments? A. The blade can be discovered through iLO or Onboard Administrator even if there is no operating system. B. Server blades automatically power up and PXE boot, and HP SIM discovers them through this PXE process. C. You can configure or repair agents using the BladeSystem iLOs or the Onboard Administrator. D. All iLOs in a BladeSystem enclosure have common login credentials for HP SIM to use. Answer: A Section: (none)
QUESTION 84 When would you want to create virtual bays in Deployment Server? A. when you want to present configuration properties for new systems before they are recognized by the deployment server. B. when you anticipate that the server name will change in the operating system and you want the deployment Server to reflect the change when it happens. C. when a server is going to be deployed and it is booting from SAN (BFS). D. when the target server is going to be deployed with a hypervisor and will host many virtual machines (VMs). Answer: A Section: (none)
QUESTION 85 What Insight Control software can help you determine which physical servers are good candidates for server consolidation?
A. B. C. D.
server deployment. server migration. performance management. virtual machine management.
Answer: C Section: (none)
QUESTION 86 Which evaluation licenses are available for Insight Control server deployment? (Select two.) A. B. C. D. E.
7 node, 10 day 7 node, 30 day 10 node, 7 day 10 node, 10 day 10 node, 30 day
Answer: CE Section: (none)
QUESTION 87 When you are configuring the Version Control Agents (VCA) on a managed system, what must occur in order to select a Reference Support Pack? A. B. C. D.
A baseline Support Pack must be configured in Version Control Repository Manager (VCRM). VCA must catalog the referencing VCRM in order to view the Support Packs available in the repository. A trust relationship must be established between VCA and VCRM to view the available Support Packs. The referencing Version Control Repository Manager must be populated with a valid Support Pack.
Answer: D Section: (none)
QUESTION 88 Click the Task button. Click the column where the version control status is shown.
Answer:
Section: (none) Explanation/Reference:
QUESTION 89 Which statement is true concerning the Version Control Agent (VCA) and Version Control Repository Manager (VCRM)? A. B. C. D.
VCA and VCRM must use the same repository. VCA and VCRM can operate independently of HP SIM. VCA and VCRM can be used to update iLOs. VCA and VCRM can both connect to the Internet for ProLiant Support Pack (PSP) updates.
Answer: B Section: (none)
QUESTION 90 Which object identifiers (OIDs) can you modify by using System Type Manager (STM)? A. B. C. D.
SNMP WMI WBEM WS-MAN
Answer: A Section: (none)
QUESTION 91 Click the Exhibit button. You are logged in to the System Management Homepage (SMH) and notice a long community string such as the one shown in the exhibit. Why was this community string placed in this SNMP configuration? Exhibit:
A. When the ProLiant Support Pack installs the Insight Agents, this unique community string is generated randomly. B. A Configure or Repair Agents task was run against this server and HP SIM generated a unique SNMP community string to manage this system. C. This number was added manually by a network administrator to provide a more complex security policy for SNMP communications. D. This is an IEEE number that is unique for each server manufacturer; the string in the exhibit is the number assigned to HP servers. Answer: B Section: (none) Explanation/Reference:
QUESTION 92 Which protocols use the credentials that are available when configuring HP Systems Insight Manager (HP SIM) discovery? (Select three.) A. B. C. D. E. F.
DMI SSH SOAP SNMP WSMAN WMI/WBEM
Answer: BEF Section: (none)
QUESTION 93 What is one way that HP Systems Insight Manager (HP SIM) discovers a device? A. B. C. D.
An adjacent node notifies HP SIM of any nodes that it has discovered. An event is sent from a managed node to HP SIM. A discovered node sends an SMTP message to HP SIM. A Simple Service Discovery Protocol (SSDP) broadcast is sent from a managed node to HP SIM.
Answer: B Section: (none)
QUESTION 94 Where can you get a copy of Windows Preboot Environment (WinPE)? A. B. C. D.
SmartStart Scripting Tool Kit Insight rapid deployment software ProLiant Integration Module (PIM) Automated Installation Kit (AIK)
Answer: D Section: (none)
QUESTION 95 Which HP Insight Control offerings are available? (Select two.) A. B. C. D. E.
Insight Control for Integrity Insight Control for ProLiant Insight Control for Linux Insight Control for VMware vCenter Server Insight Control for Virtual Machine Management
Answer: CD Section: (none)
QUESTION 96 What is included as a standard support service with Insight Control? (Select two.) A. B. C. D. E.
five-incident technical support 90 days of software technical support one year of software technical support one year of software update service 90 days of update service
Answer: CD Section: (none)
QUESTION 97 Which enhancements are features of Insight Control 6.2? (Select two.) A. B. C. D. E.
Dynamic Power Capping integration with VMware Virtual Center integration with Microsoft Hyper-V Intelligent Power Discovery of intelligent PDUs firmware updates using HP Smart Update Manager (SUM) integration
Answer: DE Section: (none)
QUESTION 98 On which HP servers can you install HP SIM and Insight Remote Services Advanced? (Select two.) A. B. C. D. E.
ProLiant DL100 series ProLiant DL300 series ProLiant DL500 series ProLiant ML100 series Integrity rack-mount series
Answer: BC Section: (none)
QUESTION 99 When is the Windows Management Instrumentation (WMI) Mapper installed by default on a central management server (CMS)? A. B. C. D.
when the CMS is hosted on an HP-UX server when the CMS is hosted on a Windows server when a Windows-based managed server is detected and discovered by HP SIM when using the Insight Control Installation Advisor to install the WMI Mapper
Answer: B Section: (none)
QUESTION 100 What are collections, as they are used in HP Systems Insight Manager (HP SIM)? A. B. C. D.
systems that have been discovered by HP SIM menu functions that fall under the same menu heading logically grouped or organized systems or events grouped tasks that run on the same managed system types
Answer: C Section: (none)
QUESTION 101 On which server platforms can an Insight Control central management server (CMS) be hosted? (Select two.) A. B. C. D.
ProLiant server any x86 server Integrity server any IA-64 server
Answer: AC Section: (none)
QUESTION 102
Which component of HP Systems Insight Manager (HP SIM) requires no license key? A. B. C. D.
BladeSystem Integrated Manager Insight server deployment Integrated Lights Out Advanced Insight virtual machine manager
Answer: A Section: (none)
QUESTION 103 Which type of component is considered part of the HP Systems Insight Manager (HP SIM) management domain? A. B. C. D.
network clients managed systems servers within the Active Directory devices defined in an HP SIM organizational unit (OU) in Active Directory
Answer: B Section: (none)
QUESTION 104 Which Insight software product integrates with HP Systems Insight Manager (HP SIM) and provides contract and warranty information? A. B. C. D.
Insight Dynamics Insight Remote Support Standard Insight Remote Support Advanced Insight Foundation Suite for ProLiant
Answer: C Section: (none)
QUESTION 105 From which components do the Insight Foundation Agents collect data in order to provide management information to HP SIM? (Select two.) A. B. C. D. E.
processors power supplies storage system critical error log NIC subsystem
Answer: CE Section: (none)
QUESTION 106 Which authorization is used to execute commands from the HP SIM command line interface (CLI)?
A. B. C. D.
authorization of a user that belongs to the SIMadmin group in HP SIM authorization of a user who has exchanged an SSH key with the CMS authorization of the user logged in to HP SIM authorization of a user that has a Windows NT account with Administrator rights
Answer: C Section: (none)
QUESTION 107 What should you consider when configuring Insight Control server deployment software? A. You should configure two NICs: one for a production/data network configured with PXE, the other connected to a management network. B. For a more secure environment, Insight Control server deployment should be installed and configured on a server different from the one hosting HP SIM. C. Insight Control server deployment is a 64-bit application that must be installed on a 64-bit operating system. D. Integration between HP SIM and Insight Control server deployment occurs automatically when both are sharing a common Oracle database. Answer: A Section: (none)
QUESTION 108 A user wants to install a Deployment Agent manually to a managed system. How can you securely provide access to the agent installation program for this user? A. B. C. D.
Copy the Agents folder on the Deployment Share to a location the user can access. Add the Agents folder to the user's profile. Create a job in Server Deployment Console to push the Agents folder to the user's local hard drive. Grant the user direct rights to the Deployment Share.
Answer: A Section: (none)
QUESTION 109 Click the Exhibit button. What is the purpose of the System Link Configuration menu in HP Systems Insight Manager (HP SIM)? Exhibit:
A. B. C. D.
It enables links to be added to the Tools menu for quick access to commonly used resources. It establishes trusted links between HP SIM and the managed systems for single sign on (SSO). It allows you to make corrections between servers to their associated iLOs. It defines the name format that HP SIM uses when creating links to managed systems.
Answer: D Section: (none) Explanation/Reference:
QUESTION 110 You want to change the default size of the HP Systems Insight Manager Audit log. Where should you make this change? A. B. C. D.
in the HP SIM menu under Options --> Audit log in the running task that executes under Schedule Task in the log.properties file at the command line by entering mxlog max filesize
Answer: C Section: (none)
QUESTION 111 Click the Exhibit button. To continue with configuration as shown in the exhibit, you need to enter the user name and password for embedded systems. For which type of systems must you enter these credentials?
Exhibit:
A. B. C. D.
any systems managed by an operating system other than Windows iLO and Onboard Administrator systems managed systems that have a hypervisor such as VMware ESX systems that are running WBEM agents
Answer: B Section: (none) Explanation/Reference:
QUESTION 112 Which services are required by Insight Control server deployment? (Select three.) A. B. C. D. E. F.
SNMP FTP WMI DHCP IIS Web Server DNS
Answer: BEF Section: (none)
QUESTION 113
What should you do when installing Insight Control server deployment? A. B. C. D.
Run the Insight Control server deployment installer from a localized path. Disable Internet Explorer Enhanced Security. Configure the FTP Site Publishing SSL setting to No SSL. Install IIS Web Server on a system different from the one where the Deployment Server Web console is installed.
Answer: B Section: (none)
QUESTION 114 Before you begin an upgrade of Insight software, what does HP recommend that you do? A. B. C. D.
Upgrade the Microsoft SQL Server database. Gather the information listed in the Insight Software 6.1 Preinstallation Worksheet. Uninstall HP SIM and all of its components and leave the SQL Server database intact. Run the mxconsolidate command to consolidate the database before the upgrade.
Answer: B Section: (none)
QUESTION 115 Which statement is true about Insight Control server deployment? A. If you are using the HP Insight Rapid Deployment software installer, you must manually install Microsoft SQL Server first. B. The SmartStart scripting toolkit must be installed manually after Insight Control installs the Altiris server deployment service. C. Configuring the deployment server to use the serial number to identify the computer provides better synchronization with HP SIM. D. Microsoft Internet Information Server (IIS) with ASP.NET must be installed on a different system from the one where the Deployment Server Web Console is installed. Answer: A Section: (none)
QUESTION 116 What must you do when configuring FTP on an Insight Control server deployment server? A. B. C. D.
Install web extensions. Install Microsoft IIS 6 Compatibility. Run Microsoft Update to address any FTP vulnerability. Install Secure Sockets Layer (SSL) to establish the required secure link.
Answer: B Section: (none)
QUESTION 117 A customer installed a Windows central management server (CMS) with HP Systems Insight Manager (HP
SIM) 100 days ago. The customer recently added 50 new ProLiant servers. Which support options are available to help the customer configure these new servers with HP SIM? (Select two.) A. B. C. D. E.
As long as the new servers are covered under an HP warranty, a support specialist can assist. After 90 days the customer can get support if there is a valid Microsoft operating system contract. The customer can purchase support for HP ProLiant Essentials products, including HP SIM. Chat and remote assistance are available 24 X 7 for the lifetime of the servers. The customer has a total of 180 days of HP installation and configuration telephone support.
Answer: BC Section: (none)
QUESTION 118 How do you add a deployment license to Insight Control server deployment software? A. B. C. D.
Run a task in HP SIM to push the license to the target nodes. Use the License Manager in HP SIM. Use the Product License Utility. PXE boot the device that you want to apply the license to; then right-click it in the Deployment Console and select Apply License.
Answer: C Section: (none)
QUESTION 119 What are the components of the Altiris Deployment Solution? (Select three.) A. B. C. D. E. F.
Deployment Server Deployment Share Integrity Integration Module (IIM) Preboot eXecution Environment (PXE) server ProLiant Integration Module (PIM) Windows Automation Installation Kit (WAIK)
Answer: ABD Section: (none)
QUESTION 120 What are two key components of Insight Control server deployment? (Select two.) A. B. C. D. E.
Altiris Deployment Solution Windows Automated Installation Kit HP Software Update Manager Smart Start Scripting Tool Kit Insight Deployment Services
Answer: AD Section: (none)
QUESTION 121 What is a function of the Deployment Share? A. B. C. D.
It provides a virtual directory used to host operating system files. It provides a repository of ISO and image files for virtual server deployment. It stores operating system patches so they can be applied in a post install of the operating system. It stores registry files, scripts, and configurations of operating systems.
Answer: D Section: (none)
QUESTION 122 What is a PXE capable client? A. B. C. D.
It is any computer that is communicating to the Deployment Server though a PXE agent. It is any computer that is used to access the PXE server through a web interface. It is any computer with a NIC that contains PXE support in its firmware. It is any computer running either a LinuxPE or WinPE operating system.
Answer: C Section: (none)
QUESTION 123 Which three pieces of software comprise Insight Control server deployment? (Select three.) A. B. C. D. E. F.
Windows Automated Installation Kit (WAIK) Altiris Deployment Solution Smart Update Manager (HP SUM) and ProLiant Support Packs (PSP) ProLiant Integration Module (PIM) Integrity Integration Module (IIM) Microsoft Deployment Toolkit
Answer: BDE Section: (none)
QUESTION 124 Which types of reports can Insight Power Manager provide? (Select two.) A. B. C. D. E.
executive summary view graph view thresholds report view printer friendly view table view
Answer: BE Section: (none)
QUESTION 125 What information is available in an Insight Power Management graph report?
A. B. C. D.
disk drive temperature, inlet air temperature, and CPU temperature average power consumption, ambient temperature, and cost per KW/hr peak power consumption, CPU temperature, and operational cost CPU performance, power consumption, and inlet air temperature
Answer: D Section: (none)
QUESTION 126 Which statement is true about HP Systems Insight Manager (HP SIM) reports? A. B. C. D.
The ability to run reports is an option that is enabled by entering a license key. A report on licensing can be run from HP SIM. The ability to run reports is dependent on the WMI protocol. A report can be altered or merged with external database queries.
Answer: B Section: (none)
QUESTION 127 How do you run a report from Microsoft Access using data that is in the HP Systems Insight Manager (HP SIM) database? A. Click the "Show the SQL queries" link in the report that you ran in HP SIM. B. Install the plug-in to Access that gives you the pre-defined report queries that are in HP SIM. C. Create an ODBC connection to the HP SIM database to display the pre-defined report queries in Access. D. Read the appendix in the HP SIM User Guide for a published scheme of the database and create your own queries. Answer: A Section: (none)
QUESTION 128 What do WBEM and SIM-S have in common? A. B. C. D.
They follow the common information model (CIM) They were created by the same standard committee. They can manage the same devices with the same amount of detail. They are part of the TCP/IP stack.
Answer: A Section: (none)
