Developed Shapes

Jan 19, 2009 - Develop wires and points onto a revolution surface. Targeted ..... This new option of blend command is available only with DL1 product.
2MB taille 24 téléchargements 83 vues
Developed Shapes

CATIA V5 Training

Foils

Copyright DASSAULT SYSTEMES

Developed Shapes

Version 5 Release 19 January 2009 EDU_CAT_EN_DL1_FI_V5R19

Instructor Notes:

Copyright DASSAULT SYSTEMES

1

Developed Shapes

About this course Objectives of the course Upon completion of this course you will be able to: - Generate unfolded ruled surface - Develop wires and points onto a revolution surface

Targeted audience Surface Designers

Prerequisites

Copyright DASSAULT SYSTEMES

Students attending this course should have knowledge of CATIA V5 Fundamentals and Generative Shape Design

4 hrs

Instructor Notes:

Copyright DASSAULT SYSTEMES

2

Developed Shapes

Table of Contents (1/2) User Interface About User Interface

Unfolded Surfaces What is Unfolded Surfaces Tool Unfolded Surfaces: Concept Definition Unfolded Surfaces Functionalities What is Transfer Surfaces Tool

Develop Wires What is Develop Wires Tool Develop Wires: Concept Definition Develop Wires Functionalities

Ruled Developable Surfaces What is Ruled Developable Surfaces Tool Ruled Developable Surfaces: Concept Definition Ruled Developable Surfaces Functionalities

Copyright DASSAULT SYSTEMES

Master Exercise Design Intent: Water Bottle and its Support Design Process: Water Bottle and its Support

5 6

7 8 9 10 13

14 15 16 18

22 23 24 25

26 27 28

Instructor Notes:

Copyright DASSAULT SYSTEMES

3

Developed Shapes

Table of Contents (2/2) 29 30 31 32 33 34

Copyright DASSAULT SYSTEMES

Step 1: Curve Development Step 2: Creating Reinforcements Step 3: Insert a New Part Step 4: Create Three Holes and Unfold Step 5: Create an Opening Step 6: Unfold the Geometry

Instructor Notes:

Copyright DASSAULT SYSTEMES

4

Developed Shapes

User Interface

Copyright DASSAULT SYSTEMES

You will become familiar with the user interface of Developed Shapes tools.

Instructor Notes:

Copyright DASSAULT SYSTEMES

5

Developed Shapes

About User Interface Developed Shapes toolbar allows you to choose Develop Wires or Unfolded Surfaces functionalities. Unfolded Shapes permits to unfold a ruled surface.

To map any wireframe feature (point, line, curve) from a folded surface to an unfolded surface and vice-versa once the unfold computation has been performed and providing you have selected All as the surface type.

Copyright DASSAULT SYSTEMES

Develop Wires permits to develop wires onto a revolution surface with respect to the surface curvature.

Generate a ruled developable surface with the blend command. Enables the blend surface to start after and stop before the wire extremities.

Instructor Notes:

Copyright DASSAULT SYSTEMES

6

Developed Shapes

Unfolded Surfaces

Copyright DASSAULT SYSTEMES

You will become familiar with the unfolded surfaces concepts and functionalities.

Instructor Notes:

Copyright DASSAULT SYSTEMES

7

Developed Shapes

What is Unfolded Surfaces Tool This tool allows you to generate unfolded ruled surfaces. The surface you want to unfold must be ruled of degree 1*n. It means that this surface was created by sweeping a linear profile (of degree 1) along a guide of degree n.

Copyright DASSAULT SYSTEMES

Restrictions: Surfaces must have a null Gaussian curvature. The origin and the direction of the surface to unfold must not be on a tearing edge.

Instructor Notes:

Copyright DASSAULT SYSTEMES

8

Developed Shapes

Unfolded Surfaces: Concept Definition Ruled surface with a hole

Unfolded surface

Ruled surface with a hole Wireframe to be unfolded with the surface.

Copyright DASSAULT SYSTEMES

Curve to tear the surface

Unfolded surface with transferred element

Instructor Notes:

Copyright DASSAULT SYSTEMES

9

Developed Shapes

Unfolded Surfaces Functionalities (1/3) When you click on Unfold icon the following window appears: Choose the face you want to unfold

Select the reference origin and the direction to guide the unfolded surface Select the plane, origin and direction for the unfolded surface and direction

Copyright DASSAULT SYSTEMES

Select the surface type to be unfolded Click to display the unfolded surface. The Flattened Surface Length Distortion displays the maximum and minimum percentages of length distortion. A positive distortion means that the flattened surface is stretched, while a negative distortion means it is shrunk. Click to display the candidate curves or edges to tear in the 3D area

This button is only available with the ‘All’ surface type. It is grayed out at edition: to access it, you first need to modify an input and click Preview.

Instructor Notes:

Copyright DASSAULT SYSTEMES

10

Developed Shapes

Unfolded Surfaces Functionalities (2/3)

Choose the curves to tear the surface

Copyright DASSAULT SYSTEMES

Choose the wireframe to be folded or unfolded with the selected face

Instructor Notes:

Copyright DASSAULT SYSTEMES

11

Developed Shapes

Unfolded Surfaces Functionalities (3/3) Since R14 the Transfer tab allows to transform points and curves lying on the surfaces to unfold (Unfold). The transfer of elements is bi-directional once the unfolded surface is created (Fold).

Select the points or curves on the surface to unfold Copyright DASSAULT SYSTEMES

Type of transformation: Unfold: If you selected elements on the surface to unfold. Fold: If you created and selected wireframe elements on the surface t be unfolded. Warning: you cannot fold an element related associatively to the unfolded support.

Instructor Notes:

Copyright DASSAULT SYSTEMES

12

Developed Shapes

What is Transfer Surfaces Tool This tool allows to map any wireframe feature from a folded surface to an unfolded surface and vice-versa. If you select ‘Surface to unfold’, the ‘Unfolded surface’ automatically gets selected.

Copyright DASSAULT SYSTEMES

Restriction: The unfold computation must be performed by selecting ‘All’ as the surface type. The curves to transfer can be non-connex and multi-domain but cannot be non-manifold.

Instructor Notes:

Copyright DASSAULT SYSTEMES

13

Developed Shapes

Develop Wires

Copyright DASSAULT SYSTEMES

You will become familiar with the develop wires concepts and functionalities.

Instructor Notes:

Copyright DASSAULT SYSTEMES

14

Developed Shapes

What is Develop Wires Tool This tool allows you to develop wires and points onto a revolution surface. The wire can be any curve or sketch provided it hasn' t several edges crossing each one. For example, the wire can be an I, U, L shape but not a T, H or Y one for example. The example used to explain the develop wires principles is a wire on a cylinder that will be developed on a spherical surface. Develop-Develop function:

p' 1

p

2

2nd coordinate

1st coordinate

Copyright DASSAULT SYSTEMES

p' '

1 2

The first coordinate is converted in a curvilinear abscissa (p becomes p') The second coordinate is converted in a curvilinear abscissa (p'becomes p'')

Instructor Notes:

Copyright DASSAULT SYSTEMES

15

Developed Shapes

Develop Wires: Concept Definition (1/2) Develop-Project:

p'

p' '

p

Copyright DASSAULT SYSTEMES

3 p' ' ' 1st coordinate

2

1 2nd coordinate

1

The first coordinate is converted in a curvilinear abscissa (p becomes p').

2

The second coordinate is converted in a curvilinear abscissa on a virtual cylinder passing through p'(p'becomes p'').

3

The last point (p'') is projected normally on the surface you need the developed wire.

Instructor Notes:

Copyright DASSAULT SYSTEMES

16

Developed Shapes

Develop Wires: Concept Definition (2/2) Develop-Develop Inverted:

2nd coordinate 1

p p' '

2

p'

1st coordinate

The second coordinate is converted in a curvilinear abscissa (p becomes p').

2

The first coordinate is converted in a curvilinear abscissa (p'becomes p'').

Copyright DASSAULT SYSTEMES

1

Instructor Notes:

Copyright DASSAULT SYSTEMES

17

Developed Shapes

Develop Wires Functionalities (1/4) When you click on Develop icon the window above appears:

Choose your 2D profile you want to develop on a cylinder

Select the cylinder where the development will be done Choose the development method

Apply a radial deformation ratio on the result (Cf slide 16) Apply an angular deviation on the result (Cf. slide 16) Apply a ratio along y axis (Cf. slide 16)

Copyright DASSAULT SYSTEMES

Select to have more parameters options to position the result

Instructor Notes:

Copyright DASSAULT SYSTEMES

18

Developed Shapes

Develop Wires Functionalities (2/4)

Copyright DASSAULT SYSTEMES

Develop wire result

Instructor Notes:

Copyright DASSAULT SYSTEMES

19

Developed Shapes

Develop Wires Functionalities (3/4)

Copyright DASSAULT SYSTEMES

Original development

Radiantness

Inclination

Instructor Notes:

Copyright DASSAULT SYSTEMES

20

Developed Shapes

Develop Wires Functionalities (4/4)

Copyright DASSAULT SYSTEMES

Original development

Intermediate radius

Instructor Notes:

Copyright DASSAULT SYSTEMES

21

Developed Shapes

Ruled Developable Surfaces

Copyright DASSAULT SYSTEMES

You will become familiar with the Ruled Developable Surfaces concepts and functionalities.

Instructor Notes:

Copyright DASSAULT SYSTEMES

22

Developed Shapes

What is Ruled Developable Surfaces Tool It provides the user with the capability to force the blend operator to generate a ruled developable surface with the blend command. It enables the blend surface to start after and stop before the wire extremities in order to respect the constraint of developability. The resulting surface can then be directly processed in order to unfold it without distortion.

Copyright DASSAULT SYSTEMES

Restrictions: This new option of blend command is available only with DL1 product.

Instructor Notes:

Copyright DASSAULT SYSTEMES

23

Developed Shapes

Ruled Developable Surfaces: Concept Definition Surfaces for blend

Curves selection in blend command

Copyright DASSAULT SYSTEMES

Different results at the extremities.

Instructor Notes:

Copyright DASSAULT SYSTEMES

24

Developed Shapes

Ruled Developable Surfaces Functionalities When you click on Blend icon the following window appears: Select the curves to blend

Select the Developable tab

Check the button ‘Create a ruled developable surface’

Copyright DASSAULT SYSTEMES

Choose the options

Instructor Notes:

Copyright DASSAULT SYSTEMES

25

Developed Shapes

Master Exercise Water Bottle and its Support 45 min

Copyright DASSAULT SYSTEMES

In this exercise, you will practice the different "Develop Shapes" tools to build a water bottle and its support.

Instructor Notes:

Copyright DASSAULT SYSTEMES

26

Developed Shapes

Design Intent: Water Bottle and its Support

Copyright DASSAULT SYSTEMES

The water bottle and its support exercise contains 2 parts: Water bottle to test Develop wires Bottle support for Unfolded surfaces

Part used: Bottle_Support.CATDrawing Water_Bottle.CATDrawing

Instructor Notes:

Copyright DASSAULT SYSTEMES

27

Developed Shapes

Design Process: Water Bottle and its Support

1

2 Develop the curve on the bottle

Copyright DASSAULT SYSTEMES

5

4 Create the opening

6

Create the 3 holes and unfold the geometry

Create the reinforcements

3

Insert a new part in the product

Unfold the geometry

Instructor Notes:

Copyright DASSAULT SYSTEMES

28

Developed Shapes

Water Bottle and its Support Water Bottle Geometry (Step 1): Curve Development 5 min

Copyright DASSAULT SYSTEMES

In this step you will develop the pre-created sketch on the bottle surface.

Instructor Notes:

Copyright DASSAULT SYSTEMES

29

Developed Shapes

Water Bottle and its Support Water Bottle Geometry (Step 2): Creating Reinforcements 15 min

Copyright DASSAULT SYSTEMES

In this step, you will create the reinforcement using the development made in step 1 and GSD tools.

Instructor Notes:

Copyright DASSAULT SYSTEMES

30

Developed Shapes

Water Bottle and its Support Water Bottle Geometry (Step 3): Insert a New Part 5 min

Copyright DASSAULT SYSTEMES

In this step, you will use ASD functionalities to insert a new part in the assembly.

Instructor Notes:

Copyright DASSAULT SYSTEMES

31

Developed Shapes

Water Bottle and its Support Support Geometry (Step 4): Create Three Holes and Unfold 10 min

Copyright DASSAULT SYSTEMES

In this step, you will unfold a surface you modified.

Instructor Notes:

Copyright DASSAULT SYSTEMES

32

Developed Shapes

Water Bottle and its Support Support Geometry (Step 5): Create an Opening 5 min

Copyright DASSAULT SYSTEMES

In this step you will create an opening using GSD tools.

Instructor Notes:

Copyright DASSAULT SYSTEMES

33

Developed Shapes

Water Bottle and its Support Support Geometry (Step 6): Unfold the Geometry 5 min

Copyright DASSAULT SYSTEMES

In this step, you will unfold the final geometry.

Instructor Notes:

Copyright DASSAULT SYSTEMES

34

Developed Shapes

To Sum Up In this course you have seen: The develop wires concept and functionalities The unfolded surfaces concept and functionalities

CONGRATULATIONS !

Copyright DASSAULT SYSTEMES

You have completed the training on Developed Shapes functionality.

Instructor Notes:

Copyright DASSAULT SYSTEMES

35