Developed Shapes

Jan 19, 2009 - Developed Shapes. CATIA V5 Training .... a New Part. 5 min. In this step, you will use ASD functionalities to insert a new part in the assembly.
848KB taille 22 téléchargements 57 vues
Developed Shapes

CATIA V5 Training

Student Notes:

Exercises

Copyright DASSAULT SYSTEMES

Developed Shapes

Copyright DASSAULT SYSTEMES

Version 5 Release 19 January 2009 EDU_CAT_EN_DL1_FX_V5R19

1

Developed Shapes Student Notes:

Table of Contents Master Exercise

4 6 8 10 12 14

Copyright DASSAULT SYSTEMES

Step 1: Curve Development Step 2: Creating Reinforcements Step 3: Insert a New Part Step 4: Create Three Holes and Unfold Step 5: Create an Opening Step 6: Unfold the Geometry

3

Copyright DASSAULT SYSTEMES

2

Developed Shapes

Master Exercise

Student Notes:

Water Bottle and its Support 45 min

Copyright DASSAULT SYSTEMES

In this exercise, you will practice the different "Develop Shapes" tools to build a water bottle and its support.

Copyright DASSAULT SYSTEMES

3

Developed Shapes

Water Bottle and its Support

Student Notes:

Water Bottle Geometry (Step 1): Curve Development 5 min

Copyright DASSAULT SYSTEMES

In this step you will develop the pre-created sketch on the bottle surface.

Copyright DASSAULT SYSTEMES

4

Developed Shapes

Do It Yourself

Student Notes:

Part used: Water_bottle_step_01.CATProduct

Copyright DASSAULT SYSTEMES

Select Water_Bottle_step_01.CATPart to edit it. Develop the sketch.2 on the bottle.

Copyright DASSAULT SYSTEMES

5

Developed Shapes

Water Bottle and its Support

Student Notes:

Water Bottle Geometry (Step 2): Creating Reinforcements 15 min

Copyright DASSAULT SYSTEMES

In this step, you will create the reinforcement using the development made in step 1 and GSD tools.

Copyright DASSAULT SYSTEMES

6

Developed Shapes

Do It Yourself

Student Notes:

Part used: Water_bottle_step_02.CATProduct

Copyright DASSAULT SYSTEMES

Select Water_Bottle_step_02.CATPart to edit it. Using sketch.3 and the development on the surface create a sweep. Do rectangular pattern on the cylinder. Join and Trim the reinforcements. Use edge fillet function to have the final bottle shape.

Copyright DASSAULT SYSTEMES

7

Developed Shapes

Water Bottle and its Support

Student Notes:

Water Bottle Geometry (Step 3): Insert a New Part 5 min

Copyright DASSAULT SYSTEMES

In this step, you will use ASD functionalities to insert a new part in the assembly.

Copyright DASSAULT SYSTEMES

8

Developed Shapes

Do It Yourself

Student Notes:

Part used: Water_bottle_step_03.CATProduct

Copyright DASSAULT SYSTEMES

Insert Bottle_support_start.CATPart in the product.

Copyright DASSAULT SYSTEMES

9

Developed Shapes

Water Bottle and its Support

Student Notes:

Support Geometry (Step 4): Create Three Holes and Unfold 10 min

Copyright DASSAULT SYSTEMES

In this step, you will unfold a surface you modified.

Copyright DASSAULT SYSTEMES

10

Developed Shapes

Do It Yourself

Student Notes:

Part used: Water_bottle_step_04.CATProduct

Copyright DASSAULT SYSTEMES

Create a sketch on ZX plane with 3 holes and extrude it. Split the cylinder with the holes. Create the tearing line in a sketch with plane.4 as support. Project the sketch on the surface. Unfold the geometry on plane.2

Copyright DASSAULT SYSTEMES

11

Developed Shapes

Water Bottle and its Support

Student Notes:

Support Geometry (Step 5): Create an Opening 5 min

Copyright DASSAULT SYSTEMES

In this step you will create an opening using GSD tools.

Copyright DASSAULT SYSTEMES

12

Developed Shapes

Do It Yourself

Student Notes:

Part used: Water_bottle_step_05.CATProduct

Copyright DASSAULT SYSTEMES

Create a sketch on YZ plane. Extrude it and split the cylinder with it. Create a Parallel Curve. Create a plane.5 offset to Plane.2.

Copyright DASSAULT SYSTEMES

13

Developed Shapes

Water Bottle and its Support

Student Notes:

Support Geometry (Step 6): Unfold the Geometry 5 min

Copyright DASSAULT SYSTEMES

In this step, you will unfold the final geometry.

Copyright DASSAULT SYSTEMES

14

Developed Shapes

Do It Yourself

Student Notes:

Part used: Water_bottle_step_06.CATProduct

Copyright DASSAULT SYSTEMES

Unfold the geometry on plane.5 by selecting the surface type ‘All’. Transfer the Parallel.1 on unfolded surface.

Copyright DASSAULT SYSTEMES

15