surface plane et attachez les montants en fil métallique dans les trous appropriés dans le cadre (voir l'Illustration A). Una vez que ambos verticales estén.
27 or 35 Qt.Waste Containers Frame Braces Basket Wires Handle #8 x 3/4” Truss Head Screws
2 1 2 2 1 4
E.
ESTIMATED ASSEMBLY TIME:
10-15 MIN
F.
CARE AND MAINTENANCE: Clean with a damp cloth and wipe parts dry. FIG. A
STEP 1 Remove the waste container frame from plastic packaging. STEP 2 Place the wire frame on a flat surface and attach wire uprights in the appropriate holes in the frame (See Figure A).
FIG. B
STEP 3 Once both uprights are firmly in place, attach both cross members to uprights (See Figure B). NOTE: Plastic clips should be on the inside of the frame. INSTALLATION INSTRUCTIONS: RV-SERIES DOUBLE 27 & 35 QT. WASTE CONTAINER PULLOUTS
I-RVKD -1217
FIG. C
STEP 4 Place the frame inside of your cabinet and snap the handle onto the frame. NOTE: Look to make sure that there is plenty of clearance to shut the door (See Figure C).
Snap handle onto the frame
STEP 5 With the frame in a closed position, insert the front (2) #8 x 3/4” screws, making sure that the framework is square to the front of the cabinet (See Figure D).
FIG. D
STEP 6 If there is sufficient clearance, install rear screws. If framework prevents access to rear screws, remove frame work by pulling out and lifting frame from slides (See Figure E).
FIG. E FIG. F
Finally, place your waste containers in the wire frame (See Figure F).
12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126
2
12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126
INSTRUCCIONES DE INSTALACIÓN INSTRUCTIONS D’INSTALLATION
SERIES RV DOBLES PARA CONTENEDORES DE BASURA DESPLEGABLES DE 25 & 33 L. SÉRIES D’ÉLÉMENTS COULISSANTS POUR POUBELLES DOUBLES RV DE 25 ET 33 L. 25 L.
Herramientas requeridas: Outils Requis:
C. A. or D.
1 8
Tiempo estimado de ensamblado Durée de l’installation:
10-15 MIN
33 L. B.
Parts List
No.
Description
Qty
A B C D E F
25 or 33 L.Waste Containers Frame Braces Basket Wires Handle #8 x 3/4” Truss Head Screws
2 1 2 2 1 4
E.
F.
CUIDADO/ ENTRETIEN: Limpie con un paño húmedo y seque las partes. Nettoyez avec un linge humide et essuyez les piéces pour les secher complétement.
PASO 1 / ÉTAPE 1 Quite el marco del contenedor de basura de su empaque plástico. Retirez le cadre de la poubelle de l’emballage en plastique.
FIG. A
PASO 2 / ÉTAPE 2 Coloque el marco de alambre en una superficie plana y sujete los alambres verticales en los orificios ap ropiados en el marco (ver la figura A). Placez le cadre en fil métallique sur une surface plane et attachez les montants en fil métallique dans les trous appropriés dans le cadre (voir l’Illustration A).
PASO 3 / ÉTAPE 3
FIG. B
Una vez que ambos verticales estén firmemente en su lugar, sujete los dos miembros cruzados a los verticales (ver la figura B).
NOTA: Los clips plásticos deben estar en la parte interior del marco. Quand les deux montants sont fermement en place, attachez les deux pièces en croix aux montants (voir l’Illustration B). REMARQUE: Les attaches en plastique doivent être à l’intérieur du cadre. INSTRUCCIONES DE INSTALACIÓN: SERIES RV DOBLES PARA CONTENEDORES DE BASURA DESPLEGABLES DE 25 & 33 L. INSTRUCTIONS D’INSTALLATION: SÉRIES D’ÉLÉMENTS COULISSANTS POUR POUBELLES DOUBLES RV DE 25 ET 33 L.
I-RVKD -1217
FIG. C
PASO 4 / ÉTAPE 4 Coloque la parte interior del marco y encaje la manija dentro del marco. NOTA: Asegúrese de ver que hay suficiente espacio para cerrar la puerta (ver la figura C).
Ajustar el mango en el marco Enclenchez la poignée sur le cadre
Placez le cadre à l’intérieur de votre armoire et enclenchez la poignée sur le cadre. REMARQUE: Assurez-vous qu’il y ait suffisamment d’espace pour fermer la porte (voir l’Illustration C).
PASO 5 / ÉTAPE 5 Con el marco en una posición de cierre, inserte los dos tornillos frontales del #8 x 3/4”, asegurándose de que el marco está al cuadro al frente del gabinete (ver la figura D).
FIG. D
Avec le cadre dans une position fermée, insérez les 2 vis avant # 8 x 3/4 po, en vous assurant que le cadre soit à angle droit avec l’avant de l’armoire (voir l’Illustration D).
PASO 6 / ÉTAPE 6 Si hay suficiente espacio, coloque los tornillos posteriores. Si el marco no permite el acceso a los tornillos posteriores, quite el marco jalando hacia afuera y alzándolo de los lados
FIG. E FIG. F
(ver la figura E).
Finalmente, coloque los contenedores de basura en el marco de alambre (ver la figura F). Si le dégagement est suffisant, installez les vis arrière. Si le cadre empêche l’accès aux vis arrière, retirez le cadre en retirant et en soulevant le cadre en dehors des coulisses (voir l’Illustration E). Enfin, placez vos poubelles dans le cadre en fil métallique (voir l’Illustration F).
12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126
NOTE: the hinges have slotted holes in case you need to micro-adjust sink panel left or right. NOTE: Using a screwdriver is recommended, but a drill is ...
27 avr. 2012 - Wind the ratchet so that the webbing overlaps itself. ... D. Check and tighten Ratchets and Cross Rails monthly to ensure the cover is tight.
front outside edge of cabinet. (Fig 2). Note: If installing into a cabinet with an inset door, move the slide assembly back additionally the thickness of the door. FIG.
up with front of face frame). Use a 3/8” nut driver to loosen and tighten the AMB brackets. The AMB brackets will allow for side to side door adjustment. STEP 5.
No. Description. Qty. A. Carbon Filter Holder. 1. B ... 12. I. Placard Stickers. 5. J. Activated Carbon Filters. 2 ... Filtros de carbón activado. / Filtre à charbon activé.
slides to REAR U-shaped support brackets with (4) machine screws (See Fig. 3). DO NOT attach lower slides to FRONT U-shaped bracket at this time! STEP 3.
Press orange release levers to disengage slides and pull slides off the unit. Presionar las palancas de liberación naranjas para desacoplar las diapositivas y ...
#8 x 5/8” Wood Screws. 14 (7 for FL). G. #8 x 1/2” Truss Head Screws. 2. H. Blum SC Slides. 2. I. Rear BLUM Brackets (FF only). 2. J. BLUM Release Triggers. 2.
bottom of the cabinet for your bottom cam base. 2) Using the star washer screws provided, install top bracket and bottom cam base into the cabinet (See FIG 1).
of where you would like it to be mounted. Note: Look to make sure that there is no interference with the cabinet door when opening and closing. STEP 1. With the ...
Tornillos de cabeza de cruz #8 x 3/4”. Vis à tête bombée # 8 x ¾ po. 4. 12400 Earl ... tornillos traseros, retírela tirando de ella y levantándola de las correderas.
STEP 7. Attach u-shaped support bracket to the cabinet floor with the mounting holes. 1-13/16” back from outside front of cabinet shown with. 3/4” wood screws.
1000. 2000. 3000. 4000. 5000. Time (min). Time (min). Time (min). Time (min). Time (min). Time (min). Time (min). Time (min). Time (min). Time (min). P/E (p ro.
deslizantes al piso del gabinete a través de los orificios del deslizante gris del pie. ... para almacenar alimentos (FSCO por sus siglas en inglés) con los.