dls ur1, ultimate reference series tweeter - Prodej-autohifi.cz

bräda, eller infällt i ex.vis en dörrsida. UTANPÅLIGGANDE MONTERING: Använd alla de tillbehör som finns i förpackningen. Den runda bottenplattan (A) mon-.
91KB taille 1 téléchargements 161 vues
DLS UR1, ULTIMATE REFERENCE SERIES TWEETER

THE KIT CONTAINS: " 2 pcs 28 mm / 1,1" tweeter elements " Mounting accessories for dashand recessed mounting

MOUNTING: UR1 can be mounted on the dashboard or recessed in a doorside.

SURFACE MOUNTING: Use all accessories coming with the tweeter. Attach the round bottom plate (A) with the screws (B) or double adhesive tape. The fasten the round holder (C) to the bottom plate using the screw and nut (D). The tweeter element (G) is then attached to the holder with three short screws (E).

C G D F E

B

A

FLUSH MOUNTING:

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Thank you for buying DLS UR1 tweeters. This tweeter is included in the DLS ULTIMATE REFERENCE speaker kits UR5, UR6, UR5S, UR6S, UR35S and UR36S. They can also be bought separately for use as "tune-up tweeters" to improve the treble in any system. For this purpose a separate Highpass filter (passive or active) must be used.

You need a hole with a diameter of 45 mm / 1,77" in the door side. Attach the tweeter element (G) to the door side with the round holder (C) on the back side of the door panel. Use the three long screws (F) to attach the element to the holder.

FACTS ABOUT DLS UR1 TWEETER Art.no Size Nom. power (RMS) Freq. range Sensitivity Fs Overall dimensions Magnet Mounting depth Mounting hole Cone material

10-25401 28 mm 50 Watts (80 Watts max) 1 kHz-25 kHz 93 dB 900 Hz 62 mm / 2,44" 28 mm / 1,1" neodymium 26 mm / 1" 45 mm / 1,77" Hand treated fabric

Tack för att du köpt DLS UR1 tweeter.UR1 ingår som standard i DLS ULTIMATE REFERENCE system typ UR5, UR6, UR5S, UR6S, UR35S och UR36S. UR1 kan även köpas separat och kopplas till valfritt system som så kallad "tune-up" tweeter för förbättrad diskantåtergivning. Vid sådan användning måste ett separat pasivt eller aktivt högpassfilter användas.

INNEHÅLL: " 2 st 28 mm tweeterelement " Monteringstillbehör för yttre och infälld montering

MONTERING: UR1 kan antingen monteras utanpåliggande på instrumentbräda, eller infällt i ex.vis en dörrsida.

UTANPÅLIGGANDE MONTERING: Använd alla de tillbehör som finns i förpackningen. Den runda bottenplattan (A) monteras med två skruv (B) eller dubbelhäftande tape. Den runda hållaren (C) monteras ihop med bottenplattan med medfljande skruv och mutter (D). Tweeterelementet (G) fästs i den runda hållaren med tre korta skruv (E).

C G

F E

D B

A

INFÄLLD MONTERING: Gör ett hål på 45 mm i dörrsidan. Den runda hållaren (C) monteras på dörrsidans baksida. Använd de tre långa skruvarna (F) för att skruva fast tweetern (G) med hållaren (C).

FAKTA OM DLS UR1 TWEETER Art.nr Storlek Nom. effekt (RMS) Frekvensområde Känslighet Fs Yttre mått Magnet diameter Monteringsdjup Monteringshål Konmaterial

10-25401 28 mm 50 Watt (80 Watt max) 1 kHz-25 kHz 93 dB 900 Hz 62 mm 28 mm neodymium 26 mm 45 mm Textilmaterial

If you have any questions about this product, contact your local dealer or DLS customer support center.

DLS Svenska AB P.O. Box 13029 S-402 51 Göteborg, Sweden Tel. +46 31 840060 Fax +46 31 844021 E-mail: [email protected] www.dls.se DLS Svenska AB 02-03-04