Flip Ultra Teardown HD

et les deux vis au dessus de la lentille de la caméra.. Étape 6. Tirez doucement sur le couvercle arrière du caméscope. Encore une fois, il est collé avec de la.
2MB taille 6 téléchargements 358 vues
Flip Ultra HD Teardown

ID de tutoriel : 9441 - Brouillon : 2013-09-05

Flip Ultra HD Teardown Please review all slides carefully before attempting this yourself. I am not responsible for any damage. Thanks. In this teardown, I show you guys how to take apart the Flip Ultra HD (2nd Generation) just for you guys so you can see the insides. Enjoy

Rédigé par: Charlie Tran

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 1 de 8

Flip Ultra HD Teardown

ID de tutoriel : 9441 - Brouillon : 2013-09-05

OUTILS: Phillips #0 Screwdriver (1)

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 2 de 8

Flip Ultra HD Teardown

ID de tutoriel : 9441 - Brouillon : 2013-09-05

Étape 1 — Flip Ultra HD Teardown



Front and back of the Flip Ultra HD

Étape 2



Locate the lock/unlock latch at the bottom of The Flip Ultra HD 2nd Generation and slide it into the unlock position.

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 3 de 8

Flip Ultra HD Teardown

ID de tutoriel : 9441 - Brouillon : 2013-09-05

Étape 3 

Pull down on the large front cover to to expose the battery slots.

Étape 4



Pry off the top of the camcorder with a flat head screwdriver. The cover is glued on with adhesive so it will take some force to dislodge it from the device.

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 4 de 8

Flip Ultra HD Teardown

ID de tutoriel : 9441 - Brouillon : 2013-09-05

Étape 5



Use a small Phillips head screwdriver to remove the two screws at the bottom of the battery slot and the two screws above the camera lens.

Étape 6



Gently pull off back cover of the camcorder. Once again, it is glued with adhesive

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 5 de 8

Flip Ultra HD Teardown

ID de tutoriel : 9441 - Brouillon : 2013-09-05

Étape 7



Remove the ribbon cable gently and pull the back cover off

Étape 8



Remove all of the screws on the circuit board



Make sure to remove the screw behind the display

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 6 de 8

Flip Ultra HD Teardown

ID de tutoriel : 9441 - Brouillon : 2013-09-05

Étape 9



There are two wires with white heads connecting the circuit board to the front of the device. Gently pull them from their slots to detach the front casing from the circuit board.

Étape 10 

The disassembled Flip Ultra HD

To reassemble your device, follow these instructions in reverse order. © iFixit — CC BY-NC-SA

fr.iFixit.com

Page 7 de 8

Flip Ultra HD Teardown

ID de tutoriel : 9441 - Brouillon : 2013-09-05

Ce document a été généré pour la dernière fois le 2019-07-27 07:45:29 AM.

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 8 de 8