CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for damp locations.
Use minimum 90°c supply conductors.
1A 2
FIXTURE LOOP
1
NIPPLE COVER THREADED NIPPLE
SOCKET SHADE
3
COLLAR NUT LAMP 4
1
Screw the threaded nipple to the top of the fixture, place the nipple cover over the threaded nipple, and secure it in place by screwing on the fixture loop.
2
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
3
Place the shade onto the socket and secure it in place by screwing the collar nut onto the socket. Repeat for remaining shades.
4
Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage information.
1
ATTENTION : RISQUE D'INCENDIE Ce produit doit être installé conformément au code d'installation en vigueur par une personne familière avec la construction et l'exploitation du produit et les risques qu'il entraîne.
Utiliser les conducteurs d'alimentation supérieure à 90° c.
1A 2
BOUCLE DE LUMINAIRE
1
COUVERCLE D’ATTACHE ATTACHE FILETÉ
DOUILLE ABAT-JOUR
3
ECROU DE COLLIER AMPOULE 4
1
Visser le attache fileté en haut de luminaire, placez le couvercle d’attache sur le attache fileté, et fixez-le en place par vissage sur la boucle de luminaire.
2
Suivez les instructions d'installation de suppléments fermés pour l'installation électrique et appareil sur une boîte de sortie de la maison.
3
Placez l'abat-jour sur la douille et fixez-le en place par vissage de l'écrou de collier sur la douille. Répétez l'opération pour les tons restants.
4
Visser l’ampoules dans les douilles. Reportez-vous à l'étiquette sur la prise d'informations Max Puissance.
2
PRECAUCIÓN: RIESGO DE INCENDIO Este producto debe instalarse de acuerdo con el código de instalación aplicable por una persona familiarizada con la construcción y operación del producto y los riesgos que conllevan.
Utilizar conductores de suministro mínimo 90° c.
1A 2
BUCLE DE LA LÁMPARA
1
CUBIERTA DEL CONECTADOR CONECTADOR ROSCADO
ENCHUFE PANTALLA
3
COLLAR NUT BOMBILLA 4
1
Atornille el conectador roscado a la parte superior de la lámpara, coloque la cubierta del conectador roscado sobre el conectador roscado y seguro en su lugar enroscando en el bucle de la lámpara.
2
Siga las instrucciones de instalación de suplementos cerrados para la instalación eléctrica y el accesorio sobre la caja de salida de casa.
3
Coloque la pantalla en el enchufe y seguro en su lugar enroscando la tuerca de collar en el enchufe. Repita para las pantallas restantes.
4
Atornille las bombillas en los enchufes. Consulte la etiqueta en la toma de información Max Potencia.
Hamlet 5 and 9 Light Chandelier. 1.0. F3065-5-F3066-9. Chandelier. F3065/5, F3066/9. 1A. 1. CAUTION RISK OF FIRE. -. This product must be installed in ...
Determine the height of the fixture with the provided stems and chain/loop, then assemble them by screwing them together. Insert the socket assembly through ...
Connect the fixture to a suitable ground in accordance to local electrical codes. ... Neatly place all the wires into the junction box, place the canopy onto the ...
installation onto house outlet box. STEM. SEMI-FLUSH MOUNT ... This product may be dimmed with a standard incandescent dimmer. This instruction shows a ...
L. This product is suitable for dry locations only. This product may be dimmed with a standard incandescent dimmer. This instruction shows a typical installation.
Installer et fixer la chaîne de perles en les accrochant au haut et au bas de ... le bas de l'appareil et à la police, puis accrocher la basse chaîne de perles à la.
Ensure that the spun pan rests properly on top of the shade. Screw the ... with the construction and operation of the product .... A Generation Brands Company.
Installation Instructions for ... Feed the fixture wires through the stem assembly and screw the stem ... box, place the canopy onto the mounting plate, and secure it in place with the ... Refer to the label on the lamp socket for Max Wattage informa
Instale los tubos de la vela por el deslizamiento de ellos en los . enchufes . Consulte la etiqueta del casquillo de la lámpara para obtener información Max.
R. T. L. This product is suitable for dry locations only. This product may be ... Follow enclosed supplement installation instructions for electrical and fixture ...
Instalar los seguidores de la vela por su inclusión en la parte superior de los tubos de la vela. . Consulte la etiqueta del casquillo de la lámpara para obtener ...
Pickering Lane 3 Light Chandelier. 1.1. F2782-3. F2782. 1A. SHADE. SHADE HOLDER. Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box. Install ring onto fixture with ball cap screws. Insta
Follow enclosed supplement installation instructions for electrical and fixture installation ... Refer to the label on the lamp socket for Max Wattage information.
junction boxes. This product is suitable for dry locations only. This product may be dimmed with a standard incandescent dimmer. Feed the cord through the ...
código de instalación aplicable por una persona familiarizada con la construcción y operación del producto y los riesgos que conllevan. Utilizar conductores de ...
Installer un lien rapide sur la boucle de luminaire et la chaîne, puis un autre lien ... Tisser le cordon à travers la chaîne, la dais et hors de la boîte électrique.