43001-0075 Jabsco Ind Cat 2002
4/3/02
3:37 PM
Page cov1
Industrial Pumps and Accessories
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:37 PM
Page cov2
Call (800) 337-4083 For 24 Hour Technical Data Assistance Via Fax! Simply enter the Docufax number (under the DFAX# column) shown opposite the product model number and instantly receive by fax the technical data sheet you requested - Day or Night! Use 9-digit numbers on all purchase orders and communication.
Series
Page No.
11810 11860 11870 12290 12310 12560 16400 16410 16450 16510 16520 1673 17430 1745 17800 17830 18330 18370 18510-000x 18510-001x 18510-002x 18580 18590 18610 18660 18670 18690 20381 23920 2620 2760 30140 30180 30460 & 30490 30480 & 30500 30510-0xxx 30510-1xxx 30510-2xxx 30510-3xxx 30510-4xxx 30510-5xxx 30520-0xxx
26 31 31 9 8 8 37 37 36 37 37 29 14 48 33 24 32 30 34 34 34 34 15 25 24 25 15 48 27 28 28 27 27 51 51 16 10 16 10 16 10 18
DFAX # 1028 1030 1030 1032 1033 1037 1043 1044 1045 1047 1048 1004 1052 1226 1055 1205 1058 1059 1180 1061 1060 1065 1066 1036 1022 1042 1070 1227 1220 1006 1007 1221 1222 1120 1228 1087 1088 1089 1090 1089 1090 1091
Series 30520-1xxx 30520-2xxx 30520-3xxx 30520-4xxx 30520-5xxx 30530-0xxx 30530-2xxx 30530-4xxx 30540-0xxx 33xxx & 34xxx 34739 34744 34754-0000 35400 35760 367xx 4100-521 (31820-0492) 4100-xxx 41075 4300-529 (31801-0115) 4300-530 (31821-0492) 4300-xxx 45900 4720 5100 520B 59500 60020 6050 61050 62022 63020 63022 63042 6400 777 D21XX Series D21XX Series G57 JSP03, JSP07 LF Series R4400 Series
Page No. 12 18 12 18 12 20 20 20 22 49 50 50 50 50 50 50 43 44 55 43 43 44 55 23 45 47 35 53 26 54 53 54 54 54 30 29 40 40 46 35 38 42
DFAX # 1092 1093 1094 1093 1094 1095 1096 1096 1097 1126 1128 1129 1130 1134 1189 1190 1213 1215 1158 1214 1213 1216 1163 1015 1217 1225 1224 1166 1020 1229 1177 1200 1200 1200 1023 1003 1210 1211 1218 1223 1209 1212
Explosion hazard. Do not pump gasoline or other flammable liquids with any of the pumps shown in this catalog. Explosion and death can occur . PRODUCT RATING: The data given in this catalog are approximate values based on the latest information available when this catalog was printed. English and metric performance data and dimensions are rounded to the approximate decimal point accuracy. Jabsco flexible impeller pumps, except motor pump units, are flow rated at 1750 RPM at 10 ft. (3m) of head. Unless otherwise noted, Jabsco flexible impeller motor pump units are rated at motor speed with 10 ft. (3m) of head. Centrifugal motor pump units are rated at 5 ft. (1.5m) of head. Manual pumps are rated in strokes/gallon with normal pumping action. Diaphragm motor pump units are flow rated at open flow. Blowers are rated at open flow. Searchlight bulb characteristics are taken from the latest bulb manufacturer's literature available.
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:37 PM
Page toc1
CONTENTS Pump Selection Guide
6-7
Phenolic Plastic Pumps
8-9
Epoxy Plastic Pumps
10-15
Stainless Steel Pumps
16-23
Bronze Pumps
24-32
Oil Change Systems
33
Centrifugal Pumps
34-37
Flojet Diaphragm Pumps
38-44
Air Operated Pumps
45-47
Accessories & Fittings
48
Hand Pumps
49
Blowers
50-52
Lighting
53-55
Jabsco Parts Reference Guide
56-63
Flex Trouble Shooting
64-65
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:37 PM
Page 6
Pump Selection Guide Flexible Impeller Pumps How it works:
Features ■ Versatile: The flexible impeller pump combines the priming features of positive displacement type pumps with the general transfer ability of centrifugals. It will pump either thin or viscous liquids and can handle more solids in suspension than other types of rotary pumps. The pump can be mounted at any angle and will pump in either direction with equal efficiency. ■ Self-Priming: Pumps instantly with dry suction lifts up to 10ft (3m) and up to 25ft (8m) when wetted. ■ Simplicity: One moving part - a tough, long-life, wear-resistant flexible impeller.
1 As the flexible impeller blades contact the offset cam they bend with a squeezing action that provides a continuous, uniform flow. 2 As the impeller rotates, each successive blade draws in liquid and carries it from intake to outlet port.
3 Flexible impeller blades create a nearly perfect vacuum for instant self-priming.
Good Pumping Practice Pipe runs should always be kept as short and straight as possible. Plumbing should always be reinforced, non-collapsible hose of the recommended size. Electric pumps should always be installed in a dry, well ventilated position as close to the liquid to be pumped as possible. Flexible impeller pumps must not be run dry. Mount flexible impeller pumps so that some liquid is left in the pump body when the pump is shut off. This will prolong impeller life and speed priming.
■ Flexibility: The flexible impeller pump offers both high flow and high pressure according to motor and impeller design.
Centrifugal Pumps How it works: 1 The rotating impeller gives velocity energy to the liquid moving it to the periphery of the volute casing and towards the discharge port.
Features ■ High Volume Flow: Centrifugal pumps handle high volumes with a smooth, non-pulsating flow. The flow rate can be regulated from maximum output to no flow with no damage to the pump. An excellent pump for general transfer applications. ■ Low Maintenance: Few moving parts mean that wear due to operation is minimal. ■ Easy Installation: Compact size for flow rate. Option of port positions simplifies pipe runs. ■ Versatility: Centrifugal pumps can be built in submersible form. ■ Low Power Consumption: Electric centrifugal pumps consume less power than most other pump types.
6
2 The volute casing discharge arrangement converts velocity energy into static pressure.
3 Centrifugal pumps must be either initially primed or mounted in such a way that liquid is permanently available at the inlet port (eg. submersible pumps).
Good Pumping Practice Pipe runs should be kept as short and straight as possible, avoiding rising and dipping over obstructions as this can cause air-locks. Always use hose of the recommended size.
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:37 PM
Page 7
Pump Selection Guide Sliding Vane Pumps How it works: 1 The vanes create a partial vacuum for priming.
2 As the rotor rotates, each successive vane draws and carries liquid from the intake to the discharge port.
Features 3 When the vanes contact the eccentric portion of the pump body, they force liquid out the discharge port.
■ Durable: Heavy duty construction in quality materials gives long life. The body is designed to resist environmental damage. The vanes and rotor are constructed of a wear resistant long life material. ■ Self-Priming: Self-priming up to 13ft (4m).
Good Pumping Practice Pipe runs should be kept as short and straight as possible, avoiding rising and dipping over obstructions as this can cause air-locks. Always use hose of the recommended size and of a rigid or reinforced type that will not collapse under suction conditions. Electric pumps should always be installed in a dry, well ventilated, position as close as possible to the liquid to be pumped. WARNING No pump manufactured by Jabsco should be used for gasoline, petroleum products or any fluid with a flash point below 100˚F (38˚C).
■ Simplicity: There are few moving parts to replace. The rotor, vanes and seal are lubricated by the liquid being pumped. Full access to the pump head can be gained by loosening 3 screws. ■ Versatile: An excellent compact unit for general utility or transfer applications that will pump thin or somewhat viscous liquids, and can be mounted at any angle and run in either direction.
Diaphragm Pumps How it works: 1 The diaphragm, pulled upwards by the movements of a piston or a handle causes a partial vacuum, opening the inlet port and closing the outlet, drawing in liquid.
2 Downward movement of the diaphragm pressurizes the liquid, closing the inlet valve and opening the outlet valve through which liquid is expelled by pressure. Features ■ Self-Priming: Vertical lift up to 6–10ft (2–3m) for electric pumps.
Good Pumping Practice Electric pumps should always be installed in a dry, well ventilated position as close as possible to the liquid to be pumped. Plumbing should always be reinforced, noncollapsible hose of the recommended size. Pumps should always be fitted with a strainer on the inlet to protect them from debris. Electric diaphragm pumps can be run dry without damage.
■ Dry Running: Diaphragm pumps can be run dry for extended periods with no damage, therefore requiring less attention in use. ■ Versatility: Self-priming and dry running capabilities mean few limitations on use. Larger manual diaphragm pumps have the ability to handle some solids in suspension. ■ Quiet Running: Electric pumps feature smooth flow and low noise levels.
7
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:37 PM
Page 8
Phenolic Plastic Pumps 12560 Phenolic Plastic Flex Pump Models 12560-0001
Neoprene impeller
Buna seal
Use where corrosion resistant plastic material, self-priming, 5 gpm flow, and debris tolerance is desired. Optional nitrile impeller 6303-000 is ideal for oil based products. Use Neoprene for water and general purpose pumping. Do not pump gasoline or other flammable liquids. Motor is not explosion proof. DO NOT RUN DRY.
12560-0001
SPECIFICATIONS Open Flow Voltage Body Material Impeller Material Shaft Material Shaft Seal Port Size Motor Approvals Maximum Pressure Prime Dry, Wet Liquid Temp. Size Ship Wt.
4.6 gpm (17.4 lpm) 12V DC Phenolic Neoprene stainless steel Buna lip type 5/8" Hose Barb PMDC, TENV, thermal overload protected 7 amp nominal 10 amp fuse USCG electric standards (title 33, chapter 1, part 183, subpart 1) for ignition protection 8.7 psi (20.1 bar), 20 ft. of water 1 - 2ft (.3-.6m), 2 - 4 ft (.6-1.2m) 45-160˚F (8-70˚C) Neoprene 50-180˚F (10-82˚C) Nitrile 3 1/4" x 5" x 6 1/2" (82 x 126 x 164mm) 4.5 lbs (2 kg)
12310 Phenolic Plastic Flex Pump Models 12310-0001 12310-0003
Neoprene impeller Nitrile impeller
Buna seal Buna seal
Use where corrosion resistant plastic material, self-priming, 4 gpm flow, and debris tolerance is desired. Neoprene for water and general purpose pumping. Nitrile impeller is ideal for oil based products. Do not pump gasoline or other flammable liquids. Motor is not explosion proof. DO NOT RUN DRY.
12310-0001
SPECIFICATIONS Open Flow Voltage Body Material Impeller Material Shaft Material Shaft Seal Port Size Motor
Maximum Pressure Prime Dry, Wet Liquid Temp. Size Ship Wt.
8
4 gpm (15.1 lpm) 115V AC 60Hz single phase Phenolic Neoprene, Nitrile stainless steel Neoprene lip type 3/8" NPT(F), 3/4" male garden hose thread PMDC rectified, TENV thermal overload protected 1.5 amp nominal 3.0 amp fuse 17 psi (1.2 bar), 39 ft of water 5 - 7 ft (1.5-2.1m), 10 - 14 ft (3.0-4.3m) 45-180ºF (7-82ºC) Neoprene, 50-180ºF (10-82ºC) Nitrile 3 7/16” x 5” x 7” (87 x 126 x 177mm) 5.8 lbs (2.6 kg)
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:37 PM
Page 9
Phenolic Plastic Pumps 12290 Phenolic Plastic Flex Pump Models 12290-0001 12290-0003 12290-0004 12290-0271 12290-0274
Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Viton impeller
ODP motor ODP motor ODP motor TENV motor TENV motor
Buna seal Buna seal Viton seal Viton seal Viton seal
Use where corrosion resistant phenolic material, self-priming, 6 gpm flow, and debris tolerance is desired. Nitrile impeller is ideal for oil based products. Use Neoprene for water and general purpose pumping. Use Viton for hyrocarbons and solvents. Long lasting AC induction motor has no brushes to wear out. Do not pump gasoline or other flammable liquids. Motor is not explosion proof. DO NOT RUN DRY. SPECIFICATIONS Open Flow
5.8 gpm (22 lpm)
Voltage
115V AC 60Hz single phase
Body Material
Phenolic
Impeller Material
Neoprene, Nitrile, Viton
Shaft Material
stainless steel
Shaft Seal
Buna or Viton lip type
Port Size
5/8" hose barb
Motor
1/6 HP, ODP
12290-0001
1/4 HP, TENV 6 ft power cord with 3 prong grounded plug, thermal overload protected 4.2 amps full load ODP 3.3 amps full load TENV Liquid Temp.
45-180ºF (7-82ºC)
Neoprene
50-180ºF (10-82ºC) Nitrile 60-180˚F (16-82˚C) Viton Maximum Pressure
17 psi (1.2 bar), 39 ft of water
Prime Dry, Wet
8-10 ft (2.4-3.1m), 10-15 ft (3.1-4.6m), Neoprene 3-5 ft (.9-1.5m), 8-10 ft (2.4-3.1m), Nitrile, Viton
Size
8 3/8" x 9 23/32" x 14 5/16" (211 x 245 x 361mm)
Ship Wt.
12 lb (5.5 kg)
9
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:37 PM
Page 10
Epoxy Plastic Pumps 30510 Epoxy Plastic Pedestal & Close-Coupled Flex Pump Model 30510-5001 30510-5003 30510-5004 30510-5101 30510-5103 30510-5104
Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller Viton impeller
Standard Pressure Standard Pressure Standard Pressure Standard Pressure Standard Pressure Standard Pressure
TEFC motor TEFC motor TEFC motor TEFC motor TEFC motor TEFC motor
Carbon seal Carbon seal Carbon seal Tungsten seal Tungsten seal Tungsten seal
30510-3001 30510-3003 30510-3004 30510-3101 30510-3103 30510-3104
Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller Viton impeller
Standard Pressure Standard Pressure Standard Pressure Standard Pressure Standard Pressure Standard Pressure
Pumphead Pumphead Pumphead Pumphead Pumphead Pumphead
Carbon seal Carbon seal Carbon seal Tungsten seal Tungsten seal Tungsten seal
30510-1001 30510-1003 30510-1004 30510-1011 30510-1013 30510-1014 30510-1101 30510-1103 30510-1104 30510-1111 30510-1113 30510-1114
Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller Viton impeller
Standard Pressure Standard Pressure Standard Pressure High Pressure High Pressure High Pressure Standard Pressure Standard Pressure Standard Pressure High Pressure High Pressure High Pressure
Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal
Carbon seal Carbon seal Carbon seal Carbon seal Carbon seal Carbon seal Tungsten seal Tungsten seal Tungsten seal Tungsten seal Tungsten seal Tungsten seal
Use where single or variable speed operation and Plastic Epoxy material is desirable. Self-priming, 8 gpm flow, debris tolerant. Nitrile impeller is ideal for oil based products. Use Neoprene for water and general purpose pumping. Use Viton for hydrocarbons and most solvents. Optional EPDM standard and high pressure impeller kits 7614-0002 and 8980-0002 for hygienic applications and some keytone solvents. Use Tungsten Carbide seal when pumping highly corrosive or abrasive fluids. Do not pump gasoline or other flammable liquids. Motor is not explosion proof. DO NOT RUN DRY. For pumphead only models (30510-3xxx) select NEMA 56C Frame C-Face motor rated at 3/4 hp at 1750 RPM with appropriate service factor. Motor must handle high axial loads. Ball bearings locked against axial movement are recommended. Motor must deliver 1.5 ft-lbs and 4.3 ft-lbs torque minimum in forward and reverse directions respectively. Use only capacitor start motors.
30510-5001
For pedestal mount models (30510-1xxx) operating at 1750 RPM, select 3/4 hp or 1 1/2 hp motor for standard or high pressure impellers respectively, with an appropriate service factor. For high pressure impellers, the motor must supply 3 ft-lbs or 6.9 ft-lbs of torque minimum for forward and reverse operation respectively. Rated flow is based on Neoprene impeller pumping water. Reduce rated flow 10% for Nitrile, Viton, and EPDM standard impellers. Reduce rated flow 15% for Nitrile, Viton and EPDM high pressure impellers.
10
30510-3001
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:37 PM
Page 11
SPECIFICATIONS Open Flow
8 gpm (30 lpm)
Voltage
115V AC 60Hz single phase
Body Material
Epoxy plastic
Impeller Material
Neoprene, Nitrile, Viton, EPDM
Shaft Material
Epoxy plastic sleeve
Shaft Seal
mechanical carbon or
Port Size
3/4" NPT(M)
Motor
3/4 HP, TEFC AC induction type
tungsten carbide on ceramic
30510-1001
intermittent duty 56C frame, C face, STANDARD IMPELLER
3 prong grounded plug, thermal overload protected Maximum Pressure
consult performance chart Neoprene
Dry Prime Wet Prime
Liquid Temp.
HIGH PRESSURE IMPELLER
Nitrile
Viton
EPDM
7-10 ft
7-10 ft
7-10 ft
4-6ft
(2.1-3.0m)
(2.1-3.0m)
(2.1-3.0m)
(1.2-1.8m)
17-22 ft
17-22 ft
17-22 ft 10-12 ft
(5.7-6.7m)
(5.7-6.7m)
(5.7-6.7m) (3.1-3.7m)
45-180ºF (8-82ºC)
Neoprene
50-180ºF (10-82ºC)
Nitrile
60-180ºF (15-82ºC)
Viton
45-185ºF (7-85ºC)
EPDM
Size
consult data sheet 43000-0516
Ship Wt.
30510-5xxx - 35 lb (15.9 kg) 30510-3xxx - 6.5 lb (3.0 kg) 30510-1xxx - 4.5lb (2.0 kg)
11
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:37 PM
Page 12
Epoxy Plastic Pumps 30520 Epoxy Plastic Pedestal & Close-Coupled Flex Pump Model 30520-5001 30520-5003 30520-5004 30520-5101 30520-5103 30520-5104
Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller Viton impeller
Standard Pressure Standard Pressure Standard Pressure Standard Pressure Standard Pressure Standard Pressure
TEFC motor TEFC motor TEFC motor TEFC motor TEFC motor TEFC motor
Carbon seal Carbon seal Carbon seal Tungsten seal Tungsten seal Tungsten seal
30520-3001 30520-3003 30520-3004 30520-3101 30520-3103 30520-3104
Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller Viton impeller
Standard Pressure Standard Pressure Standard Pressure Standard Pressure Standard Pressure Standard Pressure
Pumphead Pumphead Pumphead Pumphead Pumphead Pumphead
Carbon seal Carbon seal Carbon seal Tungsten seal Tungsten seal Tungsten seal
30520-1001 30520-1003 30520-1004 30520-1011 30520-1013 30520-1014 30520-1101 30520-1103 30520-1104 30520-1111 30520-1113 30520-1114
Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller Viton impeller
Standard Pressure Standard Pressure Standard Pressure High Pressure High Pressure High Pressure Standard Pressure Standard Pressure Standard Pressure High Pressure High Pressure High Pressure
Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal
Carbon seal Carbon seal Carbon seal Carbon seal Carbon seal Carbon seal Tungsten seal Tungsten seal Tungsten seal Tungsten seal Tungsten seal Tungsten seal
Use where single or variable speed operation and Plastic Epoxy material is desirable. Self-priming, 22 gpm flow, debris tolerant. Nitrile impeller is ideal for oil based products. Use Neoprene for water and general purpose pumping. Use Viton for hydrocarbons and most solvents. Optional EPDM standard and high pressure impeller kits 8981-0002 and 8840-0002 for hygienic applications and some keytone solvents. Use Tungsten Carbide seal when pumping highly corrosive or abrasive fluids. Do not pump gasoline or other flammable liquids. Motor is not explosion proof. DO NOT RUN DRY. For pumphead only models (30520-3xxx) select NEMA 145TC Frame C-Face motor rated at 1 1/2 hp at 1750 RPM with appropriate service factor. Motor must handle high axial loads. Front ball bearing locked against axial movement is recommended. Motor must deliver 4.8 ft-lbs and 11.2 ft-lbs torque minimum in forward and reverse directions respectively. Use only capacitor start motors.
30520-5001
For pedestal mount models (30510-1xxx) operating at 1750 RPM, select 1 1/2 hp or 3 hp motor for standard or high pressure impellers respectively, with an appropriate service factor. For high pressure impellers, the motor must supply 7.9 ft-lbs or 16.3 ft-lbs of torque minimum for forward and reverse operation respectively. Rated flow is based on Neoprene impeller pumping water. Reduce rated flow 10% for Nitrile, Viton, and EPDM standard impellers. Reduce rated flow 15% for Nitrile, Viton and EPDM high pressure impellers.
12
30520-3001
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:37 PM
Page 13
SPECIFICATIONS Open Flow
22 gpm (83 lpm)
Voltage
115/230V AC 60Hz single phase
Body Material
Epoxy plastic
Impeller Material
Neoprene, Nitrile, Viton, optional EPDM
Shaft Material
Epoxy Plastic Sleeve
Shaft Seal
mechanical carbon or
Port Size
1" NPT(M)
Motor
1 1/2 HP, capacity start, TEFC,
tungsten carbide on ceramic 30520-1001
C-face, H145 TC frame 6 ft power cord, 3 prong grounded plug,
STANDARD IMPELLER
thermal overload protected Maximum Pressure
30 psi (2.1 bar) or 70 ft of head, standard pressure 60 psi (4.2 bar) or 138 ft of head, high pressure Neoprene
Nitrile
Viton
EPDM
Dry Prime
8-10 ft
8-10 ft
4-6 ft
4-6ft
(2.4-3.0m)
(2.4-3.0m)
(1.2-1.8m)
(1.2-1.8m)
Wet Prime
18-22 ft
18-22 ft
18-22 ft 18-22 ft
(5.5-6.7m)
(5.5-6.7m)
Liquid Temp.
45-180˚F (8-82˚C)
(5.5-6.7m) (5.5-6.7m) Neoprene
50-180˚F (10-82˚C) Nitrile 60-180˚F (15-82˚C) Viton 45-185˚F (7-85˚C) HIGH PRESSURE IMPELLER
Size
EPDM
9 1/8" x 8 7/8" x 16 1/4" (230 x 224 x 410mm) pump & motor 6 5/8" x 6 5/8" x 6 13/16" (167 x 167 x 171mm) pumphead only 4 3/4” x 4 7/8" x 9 5/8" (120 x 123 x 243 mm) pedestal mount
Ship Wt.
54.5 lbs (24.7 kg) pump and motor 10.5 lbs (4.8 kg)
pumphead only
7.0 lbs (3.2 kg)
pedestal mount
13
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:37 PM
Page 14
Epoxy Plastic Pumps 17430 Epoxy Utility Pump Models 17430-0003 17430-0004
Nitrile impeller Viton impeller
Carbon Ceramic, Nitrile Carbon Ceramic, Viton
Use where corrosion resistant epoxy material, self-priming, 11 gpm flow, and debris tolerance is desired. Nitrile impeller is ideal for oil based products. Use Viton for hydrocarbons and solvents. Do not pump gasoline or other flammable liquids. Motor is not explosion proof. DO NOT RUN DRY. SPECIFICATIONS
17430-0003
Open Flow
11 gpm, (42 lpm)
Voltage
115V AC 60Hz single phase
Body Material
glass-filled Epoxy
Impeller Material
Nitrile, Viton
Shaft Material
Epoxy sleeve
Shaft Seal
mechanical carbon-on-ceramic, Nitrile or Viton
Port Size
1/2" NPT(F)
Motor
1/2 HP, TEFC, AC induction type 6 ft power cord, 3 prong grounded plug, thermal overload protected 8.8 amps full load
Maximum Pressure
21 psi (1.5 bar) or 50 ft of head
Prime Dry, Wet
12 - 15 ft (3.7-4.6m), 18 - 22 ft (5.5-6.7m)
Liquid Temp.
50-180˚F (10-82˚C) Nitrile 45-180˚F (8-82˚C)
Neoprene
60-180˚F (15-82˚C) Viton
14
Size
8 3/8" x 9 23/32" x 14 5/16" (211 x 245 x 361mm)
Ship Wt.
33.5 lbs (15.2 kg)
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:37 PM
Page 15
Plastic Pumps 18590 Macerator Run Dry DC Model
18590-1000 18590-1090
Flexible Impeller Pump
12V 12V CE
Run-dry protected macerator pump combines a self-priming flexible impeller pump with a high speed macerator blade to grind soft waste and debris down to 1/8” diameter for pumping. Ideal for animal waste and plant material slurry. Not for pumping stringy objects such as rags or solid objects like large fruit pits. Can empty a 30-gallon waste tank in approximately 3 minutes. Designed for intermittent operation. Run-dry protection circuit turns pump off after approximately 20 seconds of dry-run operation. Reactivation after run-dry shutdown occurs automatically the next time the pump is turned on. Reliance on the run-dry protection circuit to turn the pump off will significantly shorten impeller life. Do not pump gasoline or other flammable liquids. DO NOT RUN DRY. SPECIFICATIONS Open Flow Voltage Body Material Impeller Material Shaft Material Macerator Blade Shaft Seal Inlet Port Size Outlet Port Size Motor Maximum Pressure Prime Dry Liquid Temp. Size Ship Wt.
18590-1000
12 gpm (46 lpm) 12V DC Polypropylene Nitrile stainless steel stainless steel Nitrile lip type 1 1/2" NPT(M) or 1 1/2" hose barb 1" Hose Barb PMDC, TENV run dry protected 14 amps nominal 20 amps Fuse 8.7 psi or 20 ft of lift 4 ft (1.2m) 45-120º F (7-49º C) 3 5/8" x 4 3/4" x 11 3/8" (92x 121 x 289mm) 5.0 lbs (2.3 kg)
18690 Macerator AC Model
18690-0000
115V
Pump combines a self-priming flexible impeller pump with a high speed macerator blade to grind soft waste and debris down to 1/8” diameter for pumping. Ideal for animal waste and plant material slurry. Not for pumping stringy objects such as rags or solid objects like large fruit pits. Can empty a 30-gallon waste tank in approximately 3 minutes. Designed for intermittent operation. Do not pump gasoline or other flammable liquids. DO NOT RUN DRY. SPECIFICATIONS Open Flow Voltage Body Material Impeller Material Shaft Material Macerator Blade Shaft Seal Inlet Port Size Outlet Port Size Motor Maximum Pressure Prime Dry Liquid Temp. Size Ship Wt.
14 gpm (53 lpm) 115V AC Polypropylene Nitrile stainless steel cast bronze Nitrile lip type 1 1/2" NPT(M) or 1 1/2" hose barb 1" Hose Barb TENV, AC induction type, thermal overload protected nominal amp draw 7.2 amps 13 psi or 30 ft of lift 4 ft (1.2m) 45-120º F (7-49º C) 14 7/8" x 7 1/4" x 8 " (378 x 183 x 202mm) 19 lbs (8.6 kg)
18690-0000
15
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:37 PM
Page 16
Stainless Steel Pumps 30510 Industrial Stainless Steel Pedestal & Close-Coupled Flex Pump Model 30510-4001 30510-4003 30510-4004 30510-4101 30510-4103 30510-4104
Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller Viton impeller
Standard Pressure Standard Pressure Standard Pressure Standard Pressure Standard Pressure Standard Pressure
TEFC motor TEFC motor TEFC motor TEFC motor TEFC motor TEFC motor
Carbon seal Carbon seal Carbon seal Tungsten seal Tungsten seal Tungsten seal
30510-2001 30510-2003 30510-2004 30510-2101 30510-2103 30510-2104
Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller Viton impeller
Standard Pressure Standard Pressure Standard Pressure Standard Pressure Standard Pressure Standard Pressure
Pumphead Pumphead Pumphead Pumphead Pumphead Pumphead
Carbon seal Carbon seal Carbon seal Tungsten seal Tungsten seal Tungsten seal
30510-0001 30510-0003 30510-0004 30510-0011 30510-0013 30510-0014 30510-0101 30510-0103 30510-0104 30510-0111 30510-0113 30510-0114
Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller Viton impeller
Standard Pressure Standard Pressure Standard Pressure High Pressure High Pressure High Pressure Standard Pressure Standard Pressure Standard Pressure High Pressure High Pressure High Pressure
Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal
Carbon seal Carbon seal Carbon seal Carbon seal Carbon seal Carbon seal Tungsten seal Tungsten seal Tungsten seal Tungsten seal Tungsten seal Tungsten seal
Use where single or variable speed operation and 316 Stainless Steel material is desirable. Self-priming, 8 gpm flow, and debris tolerant. Nitrile impeller is ideal for oil based products. Use Neoprene for water and general purpose pumping. Use Viton for hydrocarbons and most solvents. Optional EPDM impeller kit 7614-0002 for hygienic applications and some keytone solvents. Use Tungsten Carbide seal when pumping highly corrosive or abrasive fluids. Long lasting AC induction motor has no brushes to wear out. Do not pump gasoline or other flammable liquids. Motor is not explosion proof. DO NOT RUN DRY. For pumphead only models (30510-2xxx) select NEMA 56C Frame C-Face motor rated at 3/4 hp at 1750 RPM with appropriate service factor. Motor must handle high axial loads. Front ball bearing locked against axial movement is recommended. Motor must deliver 1.5 ft-lbs and 4.3 ft-lbs torque minimum in forward and reverse directions respectively. Use only capacitor start motors.
30510-4001
For pedestal mount models (30510-0xxx) operating at 1750 RPM, select 3/4 hp or 1 1/2 hp motor for standard or high pressure impellers respectively, with an appropriate service factor. For high pressure impellers, the motor must supply 3 ft-lbs or 6.9 ft-lbs of torque minimum for forward and reverse operation respectively. Rated flow is based on Neoprene impeller pumping water. Reduce rated flow 10% for Nitrile, Viton, and EPDM standard impellers. Reduce rated flow 15% for Nitrile, Viton and EPDM high pressure impellers.
16
30510-2001
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:37 PM
Page 17
SPECIFICATIONS Open Flow
10 gpm, 38 lpm
Voltage
115V AC 60Hz single phase
Body Material
316 stainless steel
Impeller Material
Neoprene, Nitrile, Viton, optional EPDM
Shaft Material
316 stainless steel
Shaft Seal
mechanical carbon or
Port Size
3/4" NPT(F)
Motor
3/4 HP, TEFC AC induction type,
tungsten carbide on ceramic
56C frame, C face,
30510-0001
6 ft power cord, 3 prong grounded plug, thermal overload protected STANDARD IMPELLER
Maximum Pressure
30 PSI (2.1 bar) or 70 ft of head 60 PSI (4.2 bar) or 139 ft of head Nitrile
Viton
EPDM
Dry Prime
Neoprene 8-10 ft
8-10 ft
4-6 ft
4-6ft
(2.4-3.0m)
(2.4-3.0m)
(1.2-1.8m)
(1.2-1.8m)
Wet Prime
18-22 ft
18-22 ft
18-22 ft 18-22 ft
(5.5-6.7m)
(5.5-6.7m)
Liquid Temp.
45-180˚F (8-82˚C)
(5.5-6.7m) (5.5-6.7m) Neoprene
50-180˚F (10-82˚C) Nitrile 60-180˚F (15-82˚C) Viton 45-185˚F (7-85˚C) Size
EPDM
9 1/8" x 8 7/8" x 16" (230 x 224 x 403mm) pump and motor 6 5/8" x 6 5/8" x 5 3/4" (162 x 162 x 145mm) pumphead only 4 3/4” x 4 3/4” x 9 1/4”
HIGH PRESSURE IMPELLER
(120 x 120 x 233mm) pedestal mount Ship Wt.
36 lbs (16.3 kg) pump & motor 7.5 lbs (3.4 kg) pumphead only 8.5 lbs (3.9 kg) pedestal mount
17
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:37 PM
Page 18
Stainless Steel Pumps 30520 Stainless Steel Pedestal & Close-Coupled Flex Pump Model 30520-4001 30520-4003 30520-4004 30520-4101 30520-4103 30520-4104
Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller Viton impeller
Standard Pressure Standard Pressure Standard Pressure Standard Pressure Standard Pressure Standard Pressure
TEFC motor TEFC motor TEFC motor TEFC motor TEFC motor TEFC motor
Carbon seal Carbon seal Carbon seal Tungsten seal Tungsten seal Tungsten seal
30520-2001 30520-2003 30520-2004 30520-2101 30520-2103 30520-2104
Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller Viton impeller
Standard Pressure Standard Pressure Standard Pressure Standard Pressure Standard Pressure Standard Pressure
Pumphead Pumphead Pumphead Pumphead Pumphead Pumphead
Carbon seal Carbon seal Carbon seal Tungsten seal Tungsten seal Tungsten seal
30520-0001 30520-0003 30520-0004 30520-0011 30520-0013 30520-0014 30520-0101 30520-0103 30520-0104 30520-0111 30520-0113 30520-0114
Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller Viton impeller
Standard Pressure Standard Pressure Standard Pressure High Pressure High Pressure High Pressure Standard Pressure Standard Pressure Standard Pressure High Pressure High Pressure High Pressure
Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal
Carbon seal Carbon seal Carbon seal Carbon seal Carbon seal Carbon seal Tungsten seal Tungsten seal Tungsten seal Tungsten seal Tungsten seal Tungsten seal
Use where single or variable speed operation and 316 Stainless Steel material is desirable. Self-priming, 22 gpm flow, debris tolerant. Nitrile impeller is ideal for oil based products. Use Neoprene for water and general purpose pumping. Use Viton for hydrocarbons and most solvents. Optional EPDM impeller kit 8981-0002 for hygienic applications and some keytone solvents. Use Tungsten Carbide seal when pumping highly corrosive or abrasive fluids. Do not pump gasoline or other flammable liquids. Motor is not explosion proof. DO NOT RUN DRY. For pumphead only models (30520-2xxx) select NEMA H145TC Frame C-Face motor rated at 1 1/2 hp at 1750 RPM with appropriate service factor. Motor must handle high axial loads. Front ball bearing locked against axial movement is recommended. Motor must deliver 4.8 ft-lbs and 11.2 ft-lbs torque minimum in forward and reverse directions respectively. Use only capacitor start motors.
30520-4001
For pedestal mount models (30520-0xxx) operating at 1750 RPM, select 1 1/2 hp or 3 hp motor for standard or high pressure impellers respectively, with an appropriate service factor. For high pressure impellers, the motor must supply 7.9 ft-lbs or 16.3 ft-lbs of torque minimum for forward and reverse operation respectively. Rated flow is based on Neoprene impeller pumping water. Reduce rated flow 10% for Nitrile, Viton, and EPDM standard impellers. Reduce rated flow 15% for Nitrile, Viton and EPDM high pressure impellers. 30520-2001
18
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:37 PM
Page 19
SPECIFICATIONS Open Flow
22 gpm (83 lpm)
Voltage
115/230V AC 60Hz single phase
Body Material
316 stainless steel
Impeller Material
Neoprene, Nitrile, Viton, Optional EPDM
Shaft Material
316 stainless steel
Shaft Seal
mechanical carbon
Port Size
1" NPT(F)
Motor
1 1/2 HP, TEFC AC induction type,
or tungsten carbide on ceramic 30520-0001 H145 TC frame, C face, 6 ft power cord, 3 prong grounded plug, thermal overload protected
STANDARD IMPELLER Maximum Pressure
30 psi (2.1 bar) or 69 ft of head standard 60 psi (4.2 bar) or 138 ft of head high pressure
Dry Prime Wet Prime
Liquid Temp.
Neoprene
Nitrile
8-10 ft
8-10 ft
Viton 4-6 ft
EPDM
(2.4-3.0m)
(2.4-3.0m)
(1.2-1.8m)
(1.2-1.8m)
18-22 ft
18-22 ft
18-22 ft
18-22 ft
(5.5-6.7m)
(5.5-6.7m)
(5.5-6.7m)
(5.5-6.7m)
4-6ft
50-180˚F (10-82˚C) Nitrile 45-180˚F (8-82˚C)
Neoprene
60-180˚F (15-82˚C) Viton 45-185˚F (7-85˚C) Size HIGH PRESSURE IMPELLER
EPDM
8 7/16" x 8 7/8" x 18 1/4" (213 x 224 x 460mm) pump and motor 6 5/8" x 6 5/8" x 7 1/2" (167 x 167 x 189mm) pumphead only 4 3/4" x 4 3/4" x 9 1/4" (120 x 120 x 233mm) pedestal mount
Ship Wt.
36 lbs (16.3 kg)
pump & motor
7.5 lbs (3.4 kg)
pumphead only
8.5 lbs (3.9 kg)
pedestal mount
19
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:37 PM
Page 20
Stainless Steel Pumps 30530 Stainless Steel Pedestal & Close-Coupled Flex Pump Model 30530-4001 30530-4003 30530-4004 30530-4101 30530-4103 30530-4104
Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller Viton impeller
Standard Pressure Standard Pressure Standard Pressure Standard Pressure Standard Pressure Standard Pressure
TEFC motor TEFC motor TEFC motor TEFC motor TEFC motor TEFC motor
Carbon seal Carbon seal Carbon seal Tungsten seal Tungsten seal Tungsten seal
30530-2001 30530-2003 30530-2004 30530-2101 30530-2103 30530-2104
Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller Viton impeller
Standard Pressure Standard Pressure Standard Pressure Standard Pressure Standard Pressure Standard Pressure
Pumphead Pumphead Pumphead Pumphead Pumphead Pumphead
Carbon seal Carbon seal Carbon seal Tungsten seal Tungsten seal Tungsten seal
30530-0001 30530-0003 30530-0004 30530-0011 30530-0013 30530-0014 30530-0101 30530-0103 30530-0104 30530-0111 30530-0113 30530-0114
Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller Viton impeller
Standard Pressure Standard Pressure Standard Pressure High Pressure High Pressure High Pressure Standard Pressure Standard Pressure Standard Pressure High Pressure High Pressure High Pressure
Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal
Carbon seal Carbon seal Carbon seal Carbon seal Carbon seal Carbon seal Tungsten seal Tungsten seal Tungsten seal Tungsten seal Tungsten seal Tungsten seal
Use where single or variable speed operation and 316 Stainless Steel material is desirable. Self-priming, 50 gpm flow, debris tolerant. Nitrile impeller is ideal for oil based products. Use Neoprene for water and general purpose pumping. Use Viton for hydrocarbons and most solvents. Optional standard EPDM impeller kit 14346-0002 for hygienic applications and some keytone solvents. Use Tungsten Carbide seal when pumping highly corrosive or abrasive fluids. Do not pump gasoline or other flammable liquids. Motor is not explosion proof. DO NOT RUN DRY. For pumphead only models (30530-2xxx) select NEMA 184TC Frame C-Face motor rated at 5 hp at 1750 RPM with appropriate service factor. Motor must handle high axial loads. Front ball bearing locked against axial movement is recommended. Motor must deliver 14.5 ft-lbs and 43 ft-lbs torque minimum in forward and reverse directions respectively. For standard impellers only. Use only capacitor start motors.
30530-4001
For pedestal mount models (30530-0xxx) operating at 1750 RPM, select 3 hp or 6 hp motor for standard or high pressure impellers respectively, with an appropriate service factor. For high pressure impellers, the motor must supply 26 ft-lbs or 40 ft-lbs of torque minimum for forward and reverse operation respectively. Rated flow is based on Neoprene impeller pumping water. Reduce rated flow 10% for Nitrile, Viton, and EPDM standard impellers. Reduce rated flow 15% for Nitrile, Viton and EPDM high pressure impellers.
20
30530-2001
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:37 PM
Page 21
SPECIFICATIONS Open Flow
50 gpm (189 lpm)
Voltage
230/460V AC 60Hz three phase
Body Material
316 stainless steel
Impeller Material
Neoprene, Nitrile, Viton, Optional EPDM
Shaft Material
316 stainless steel
Shaft Seal 30530-0001
mechanical carbon or tungsten carbide on ceramic
Port Size Motor
1 1/2" NPT(F) 5 HP, TEFC AC induction type, 184 TC frame, C-face, 6 ft power cord, 3 prong grounded plug,
STANDARD IMPELLER
thermal overload protected Neoprene Dry Prime Wet Prime Maximum Pressure
Nitrile
Viton
EPDM
8-10 ft
8-10 ft
4-6 ft
4-6ft
(2.4-3.0m)
(2.4-3.0m)
(1.2-1.8m)
(1.2-1.8m)
18-22 ft
18-22 ft
18-22 ft 18-22 ft
(5.5-6.7m)
(5.5-6.7m)
(5.5-6.7m)
(5.5-6.7m)
30 psi (2.1 bar) or 69 ft of head standard 60 psi (4.2 bar)or 138 ft of head high pressure
Liquid Temp.
50-180˚F (10-82˚C) Nitrile 45-180˚F (8-82˚C)
Neoprene
60-180˚F (15-82˚C) Viton 45-185˚F (7-85˚C) HIGH PRESSURE IMPELLER
Size
EPDM
9" x 10 3/8" x 23 1/4" (227 x 262 x 586mm) pump and motor 9" x 9" x 8 5/16" (227 x 227 x 210mm) pumphead only 5 3/4" x 6 7/8" x 11 9/16" (145 x 174 x 292mm) pedestal mount
Ship Wt.
93.5 lbs (42.5 kg)
pump & motor
30.0 lbs (13.6 kg)
pumphead only
21.0 lbs (9.5 kg)
pedestal mount
21
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:37 PM
Page 22
Stainless Steel Pumps 30540 Industrial Stainless Steel Pedestal Pump Model 30540-0001 30540-0003 30540-0004 30540-0011 30540-0013 30540-0101 30540-0103 30540-0104 30540-0111 30540-0113
Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller
Standard Pressure Standard Pressure Standard Pressure High Pressure High Pressure Standard Pressure Standard Pressure Standard Pressure High Pressure High Pressure
Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal Pedestal
Carbon seal Carbon seal Carbon seal Carbon seal Carbon seal Tungsten Carbide Tungsten Carbide Tungsten Carbide Tungsten Carbide Tungsten Carbide
For pedestal mount models operating at 1750 RPM, select 5 hp or 7 hp motor for standard or high pressure impellers respectively, with an appropriate service factor. For standard pressure impellers, the motor must supply 21 ft-lbs or 38 ft-lbs of torque minimum for forward and reverse operation respectively. For high pressure impellers, the motor must supply 28 ft-lbs or 49 ft-lbs of torque minimum for forward and reverse operation respectively. Optional standard EPDM impeller kit 8963-0002 and high pressure EPDM impeller kit 8600-0002. Rated flow is based on standard Neoprene impeller pumping water. Reduce rated flow 10% for Nitrile, Viton, and EPDM standard and high pressure impellers. SPECIFICATIONS Open Flow Body Material Impeller Material Shaft Material Shaft Seal Port Size Maximum Pressure Dry Prime Wet Prime Liquid Temp.
Size Ship Wt.
100 gpm (378 lpm) 316 Stainless Steel Neoprene, Nitrile, Viton, EPDM 316 Stainless Steel Mechanical Carbon-on-Ceramic, Nitrile or Viton Mechanical Carbon-on-Tungsten, Nitrile or Viton 2" NPT(M) 20 psi (1.4 bar) or 46 ft lift standard pressure impeller 60 psi (4.1 bar) or 138 ft lift high pressure impeller Neoprene Nitrile Viton 8-10 ft (2.4-3.0m) 8-10 ft (2.4-3.0m) 4-6 ft (1.2-1.8m) 18-22 ft (5.5-6.7m) 18-22 ft (5.5-6.7m) 18-22 ft (5.5-6.7m) 50-180˚F (10-82˚C) Nitrile 45-180˚F (8-82˚C) Neoprene 60-180˚F (15-82˚C) Viton 45-185˚F (7-85˚C) EPDM 8 3/4" x 7 1/2" x 14 1/8" (223 x 191 x 359mm) pedestal 8.5 lbs (3.9 kg) pedestal mount
STANDARD IMPELLER
22
30540-0001 EPDM 4-6 ft (1.2-1.8m) 18-22 ft (5.5-6.7m)
HIGH PRESSURE IMPELLER
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:37 PM
Page 23
Stainless Steel Pumps 4720 Stainless Steel Utility Flex Pump Models 4720-0001 4720-0003
Neoprene impeller Nitrile impeller
Nitrile seal Nitrile seal
Use where stainless steel, self-priming, 11 gpm flow, debris tolerance and portable 115V AC or 230V AC 60 Hz operation is desired. Nitrile impeller is ideal for oil based products. Use Neoprene for water and general purpose pumping. Do not pump gasoline or other flammable liquids. Motor is not explosion proof. DO NOT RUN DRY. SPECIFICATIONS Open Flow
11 gpm (41 lpm)
Voltage
115 / 230V AC 60Hz single phase
Body Material
stainless steel
Impeller Material
Neoprene, Nitrile
Shaft Material
316 stainless steel
Shaft Seal
Neoprene lip type
Port Size
1/2" NPT(F)
Motor
1/3HP TEFC AC Induction Type,
4720-0003
6 ft power cord, 3 prong grounded plug, thermal overload protected Maximum Pressure
21 psi (1.5 bar) or 50 ft of Head
Prime Dry, Wet
8-10 ft (2.4-3.0m), 18-22 ft (5.5-6.7m)
Liquid Temp.
50-180˚F (10-82˚C) Nitrile 45-180˚F (8-82˚C) Neoprene
Size
8 1/4" x 7 3/4" x 13 1/8" (208 x 195 x 331mm)
Ship Wt.
35 lbs (15.9 kg)
23
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:37 PM
Page 24
Bronze Pumps 17830 Reversible DC Water Puppy Models 17830-1012 Especially suited for viscous fluids and engine oil transfer where self-priming and 3 gpm flow is required. Pump oil from crankcase to storage container, and from storage container to waste container automatically using the manual flow reverse switch. No need to remove or re-attach hoses to reverse oil flow direction. Oil temperature should be 100-140˚F. Use 12V DC from vehicle battery. Do not pump gasoline or other flammable liquids. DO NOT RUN DRY.
17830-1012
SPECIFICATIONS Open Flow Voltage Body Material Impeller Material Shaft Material Shaft Seal Port Size Motor
Approvals Maximum Pressure Prime Dry, Wet Liquid Temp. Size Ship Wt.
3 gpm (11.4 lpm) 12V DC bronze Nitrile stainless steel Buna lip type 3/8" NPT(F) PMDC, TENV with manual reverse switch 10 amps nominal 15 amps fuse CE 8.7 psi or 20 ft of lift 3-4 ft (.9-1.2 m), 15-20 ft (4.6-6.1 m) 45-180˚F (7-82˚C) Nitrile 4 7/16" x 3 1/4" x 7 7/8" (113 x 83 x 200 mm) 9 lbs (4.1 kg)
18660 DC Water Puppy Models 18660-0121 Neoprene impeller 18660-0123 Nitrile impeller For general transfer pumping where self-priming, 6 gpm flow and debris tolerance are required. Use optional oil-resistant nitrile impeller 6303-0003 if oil or diesel fuel are present. Do not pump gasoline or other flammable liquids. DO NOT RUN DRY.
18660-0121
SPECIFICATIONS Open Flow Voltage Body Material Impeller Material Shaft Material Shaft Seal Shaft Seal Material Port Size Motor
Maximum Pressure Prime Dry, Wet Liquid Temp. Size Ship Wt.
24
6.3 gpm (24 lpm) 12V DC bronze Neoprene or Nitrile stainless steel lip type Nitrile 1/2" NPT(F) 3/4" male garden hose adapter PMDC, TENV 8.0 amps nominal 15 amps fuse 8.7 psi or 20 ft of lift 2-4 ft (.6-1.2m), 15-20 ft (4.6-6.1m) 45-180˚F (7-82˚C) Neoprene 3 3/8" x 4 3/4" x 6 1/2" (86 x 121 x 165mm) 4.5 lbs (2. kg)
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:37 PM
Page 25
Bronze Pumps 18670 Commercial Duty DC Water Puppy Model
18670-0123 18670-0923 18670-0943
12V 12V CE 24V CE
Nitrile Seal Nitrile Seal Nitrile Seal
Commercial Duty Water Puppy has 25% more flow than the standard model and a heavy duty PMDC motor. For general transfer pumping where self-priming, 8 gpm flow and debris tolerance are required. Oil-resistant nitrile impeller is standard. Do not pump gasoline or other flammable liquids. DO NOT RUN DRY. SPECIFICATIONS Open Flow Voltage Body Material Impeller Material Shaft Material Shaft Seal Port Size Motor Maximum Pressure Prime Dry, Wet Liquid Temp. Maximum Pressure Size Ship Wt.
18670-0123 8 gpm (30.4 lpm) 12 or 24V DC bronze Nitrile 316 stainless steel lip type 1/2" NPT(F) and 1" hose barb 3/4" male garden hose adapter PMDC, TENV Amp Draw 11.5 amp at 12V, 5 amp at 24V Fuse Size 20 amp for 12V, 10 amp for 24V 8.7 psi or 20 ft of lift 4-6 ft (1.2-1.8m), 15-20 ft (4.6-6.1m) 50-180˚F (10-82˚C) Nitrile 8.7 psi or 20 ft of Head 3" x 4 3/4" x 6 7/8" (76 x 120 x 175mm) 6.0 lbs (2.7 kg)
18610 Bronze Utility Pump Models 18610-0001 18610-0003 18610-0004 18610-0271 18610-0273 18610-0274
Neoprene impeller Nitrile impeller Viton impeller Neoprene impeller Nitrile impeller Viton impeller
ODP motor ODP motor ODP motor TENV motor TENV motor TENV motor
Nitrile seal Nitrile seal Viton seal Nitrile seal Nitrile seal Viton seal
For general transfer pumping where self-priming, 6 gpm flow, debris tolerance and portable 115VAC operation is desired. Choice of impeller materials. Nitrile for oil based products. Viton for hydrocarbons and solvents. Neoprene for water and general purpose pumping. Long lasting AC induction motor has no brushes to wear out. Do not pump gasoline or other flammable liquids. Do not run dry. Motor is not explosion proof. For continuous operation at 75˚F do not exceed 15 psi outlet pressure or 38 feet of lift. 18610-0001 SPECIFICATIONS Open Flow Voltage Body Material Impeller Material Shaft Material Shaft Seal Port Size Motor Maximum Pressure Dry Prime Wet Prime Liquid Temp. Size Ship Wt.
6.0 gpm (22.8 lpm) 115V AC 60Hz single phase Bronze Neoprene 316 Stainless Steel Neoprene Lip type 1/2" NPT(F) 3/4" Male Garden Hose Adapters 1/4 HP, non-vented, 8 ft power cord, 3 prong grounded plug, Thermal Overload Protected 13 psi, 30 ft of Head ODF 17 psi, 39 ft of Head TENV 4 - 6 ft 16 - 20 ft 45-180˚F (7-82˚C) Neoprene 50-180˚F (10-82˚C) Nitrile 60-180˚F (15-82˚C) Viton 9" x 7" x 7 1/4" 12 lbs (5.5 kg)
25
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 26
Bronze Pumps 11810 Bronze AC Utility Pump Models 11810-0003 11810-0011 11810-0013
Nitrile impeller Neoprene impeller Nitrile impeller
ODP motor TEFC motor TEFC motor
Nitrile seal Nitrile seal Nitrile seal
For general transfer pumping where self-priming, 10 gpm flow, debris tolerance and portable 115V AC operation is desired. Nitrile for oil based products. Neoprene for water and general purpose pumping. Do not pump gasoline or other flammable liquids. Do not run dry. Motor is not explosion proof.
11810-0003
SPECIFICATIONS Open Flow Voltage Body Material Impeller Material Shaft Material Shaft Seal Shaft Seal Material Port Size Motor
Maximum Pressure Prime Dry, Wet Liquid Temp. Size Ship Wt.
10 gpm (38 lpm) 115V AC 60Hz single phase bronze Nitrile 316 stainless steel lip type Nitrile 1/2" NPT(F) and 3/4" male garden hose thread 1/3 HP, TEFC or ODP AC induction type 8 ft power cord with 3 prong grounded plug thermal overload protected 7 amps nominal 10 amp fuse 17 psi, 39 ft of Head 8 - 10 ft, 16 - 20 ft 45-180˚F (7-82˚C) Neoprene 50-180˚F (10-82˚C) Nitrile 7 3/4" x 7 1/4" x 10 1/2" (197 x 184 x 267mm) 20 lbs (9.1kg) ODP, 25 lbs (11.3kg) TEFC
6050 Bronze AC Utility Pump Models
6050-0003 ODP Motor 6050-0013 TEFC Motor For general transfer pumping using 115V AC power where self-priming, 23 gpm flow and debris tolerance are required. Oil-resistant nitrile impeller is standard. Do not pump gasoline or other flammable liquids. DO NOT RUN DRY.
6050-0003
SPECIFICATIONS Open Flow Voltage Body Material Impeller Material Shaft Material Shaft Seal Shaft Seal Material Port Size Motor
Maximum Pressure Prime Dry, Wet Liquid Temp. Ship Wt. Size
26
23 gpm (87 lpm) 115V AC 60Hz single phase bronze Nitrile 316 stainless steel lip type Nitrile 1" NPT(F) 3/4 Hp TEFC or ODP AC induction type 8 ft. power cord with 3 prong grounded plug thermal overload protected 26 psi or 60 ft lift 8-10 ft (2.4-3 m), 20-22 ft (6.1-6.7m) 50-180˚F (10-82˚C) 35.5 lbs (16.1 kg) 8 19/32" x 7 3/4" x 13 1/32" (218 x 197 x 331mm)
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 27
Bronze Pumps NEW 23920 Extended Run Dry DC
Flexible Impeller Pump
Models
8 gpm 23920-9403 12VDC 11 gpm 23920-9213 12VDC For general purpose pumping where self-priming and extended run dry capability are required. Liquid stored in the specially designed pumphead provides 10 minutes or more of run dry operation after liquid supply tank is empty. Heavy duty 12V DC motor. Upgraded carbon-ceramic mechanical shaft seal standard. Do not pump gasoline or other flammable liquids. SPECIFICATIONS Open Flow Voltage Body Material Impeller Material Shaft Material Shaft Seal Port Size Motor
Liquid Temp. Maximum Pressure Dry Prime Size Ship Wt.
8 or 11 gpm (30 or 42 lpm) 12V DC bronze Nitrile stainless steel mechanical, Carbon Ceramic/Nitrile 3/4" NPT(F) PMDC, TENV 23920-9403 15 amp fuse 23920-9213 25 amp fuse 45-180˚F (7-82˚C) 8 psi, 19 ft of lift 23920-9403 3-4 ft, 23920-9213 6-8 ft 23920-9403 7 1/2" x 4 3/4" x 3 1/2" (190 x 121 x 89mm) 23920-9213 8 1/2" x 4 3/4" x 3 1/2" (216 x 121 x 89mm) 23920-9403 8.2 lbs (4 kg) 23920-9213 9.7 lbs (3.4 kg)
30140 & 30180 Run Dry AC Models
23920-9403
30140-0003 30180-0003
Flexible Impeller Pump
9 gpm 23 gpm
For general transfer pumping where self-priming, debris tolerance and extended run dry capability are required. Liquid stored in the specially designed pumphead provides 10 or more minutes of operation after supply tank is empty. Oil-resistant nitrile impeller is standard. Do not pump gasoline or other flammable liquids. EXTENDED RUN DRY CAPABILITY. SPECIFICATIONS Open Flow Voltage Body Material Impeller Material Shaft Material Shaft Seal Port Size Motor
Maximum Pressure Prime Dry, Wet Liquid Temp. Size Ship Wt.
30140 9 gpm (34 lpm) 30180 23 gpm (87 lpm) 115V AC 60Hz single phase bronze Nitrile 316 stainless steel Nitrile, lip type 1" NPT(F) 30140 1 1/2” NPT(F) 30180 1/3 HP capacitor start type, ODP, 8 ft. power cord 3 prong grounded plug, thermal overload protected 7 amps 30140, 11 amps 30180, fuse 10 amps 30140, 15 amps 30180, fuse 30140 20 psi or 46 ft lift 30180 30 psi or 69 ft lift 30140 8-10 ft (2.4-3m) 30180 15-22 ft (4.6-6.7m) 50-180˚ F (10-82˚ C) 30140 7 9/16" x 7 3/8" x 10 1/8" (192 x 187 x 257mm) 30180 8 1/2" x 8 1/8" x 11 11/16" (216 x 206 x 297mm) 30140 23.0 lbs (10.4 kg) 30180 31.0 lbs (14.1 kg)
30140-0003
27
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 28
Bronze Pumps 2760 Bronze Pedestal Pump Models 2760-0001 2760-0003
Neoprene Impeller Nitrile Impeller
Use where bronze material, self-priming, up to 3.9 gpm flow, debris tolerance and adaptability to a specific flow is desired. Use Neoprene for water and general purpose pumping. Nitrile impeller is ideal for oil based products. Do not pump gasoline or other flammable liquids. DO NOT RUN DRY.
2760-0001
1160 RPM
1750 RPM
SPECIFICATIONS Open Flow Body Material Impeller Material Shaft Material Shaft Seal Shaft Diameter Port Size Maximum Pressure Prime Dry, Wet Liquid Temp. Size Ship Wt.
500 RPM
3.9 gpm (14.8 lpm) Bronze Neoprene, Nitrile stainless steel Neoprene lip type 3/8” 1/4" NPT(F) 17 psi (1.2 bar) or 40 ft of head 8-10 ft (2.4-3 m), 15-22 ft (4.6-6.7 m) 45-180˚F (7-82˚C) Neoprene 50-180˚F (10-82˚C) Nitrile 2 7/16” x 2 5/8” x 3 9/16” (62 x 67 x 90mm) 1.5 lbs (.7 kg)
2620 Bronze Pedestal Pump
2620-1001
1750 RPM 1160 RPM
1160 RPM
Models 2620-1001 Neoprene Impeller 2620-1003 Nitrile Impeller Use where bronze material, self-priming, up to 5.8 gpm flow, debris tolerance and adaptability to a specific flow is desired. Use Neoprene for water and general purpose pumping. Nitrile impeller is ideal for oil based products. Viton impeller 3398-0004 sold separately. Do not pump gasoline or other flammable liquids. DO NOT RUN DRY. SPECIFICATIONS Open Flow Body Material Impeller Material Shaft Material Shaft Diameter Shaft Seal Material Port Size Maximum Pressure Prime Dry, Wet Liquid Temp. Size Ship Wt.
28
5.8 gpm (22 lpm) Bronze Neoprene, Nitrile Bronze 1/2" Neoprene lip type 3/8" NPT(F) 13 psi (.9 bar) or 30 ft of head 8-10 ft (2.4-3m), 15-22 ft (4.6-6.7m) 45-160˚F (8-70˚C) Neoprene 50-160˚F (10-82˚C) Nitrile 3 3/16" x 3 1/8" x 3 15/16" (81 x 79 x 100mm) 2.7 lbs (1.3 kg)
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 29
Bronze Pumps 1673 Bronze Pedestal Models
1673-1001 1673-1003 1673-2001 1673-2003
Flexible Impeller Pump Neoprene Impeller Nitrile Impeller Neoprene Impeller Nitrile Impeller
Lip Seal Lip Seal Face Seal Face Seal
Use where bronze material, self-priming, up to 11 gpm flow, debris tolerance and adaptability to a specific flow is desired. Neoprene for water and general purpose pumping. Nitrile impeller is ideal for oil based products. Face seal available for extended pump life. Do not pump gasoline or other flammable liquids. DO NOT RUN DRY. SPECIFICATIONS Open Flow Body Material Impeller Material Shaft Material Shaft Size Shaft Seal Shaft Seal Material Port Size Prime Dry, Wet Liquid Temp. Maximum Pressure Size Ship Wt.
11 gpm (42 lpm) Bronze Neoprene, Nitrile stainless steel 5/8" lip or face seal Nitrile 1/2" NPT(F) 8-10 ft (2.4-3 m), 15-20 ft (4.6-6.7m) 45-160˚F (8-70˚C) 50-180˚F (10-82˚C) 21 psi (1.5 bar) or 50 ft of head 3 13/16" x 4 1/8" x 4 1/2" (96 x 104 x 113mm) 4.25 lbs (1.4 kg)
777 Bronze Pedestal Models
777-9001 777-0001 777-0003 777-9003 777-9051
1673-1001
1750 RPM 1160 RPM
500 RPM
Flexible Impeller Pump
Neoprene Impeller Neoprene Impeller Nitrile Impeller Nitrile Impeller Neoprene Impeller
Face Seal Lip Seal Lip Seal Face Seal Face Seal
Full Cam Full Cam Full Cam Full Cam Half Cam
Neoprene for water and general purpose pumping. Nitrile impeller is ideal for oil based products. Reduce flow 50% for half cam operation. Use face seal to extend pump life. Do not pump gasoline or other flammable liquids. DO NOT RUN DRY. SPECIFICATIONS Open Flow Body Material Impeller Material Shaft Material Shaft Seal Shaft Seal Material Port Size Maximum Pressure Prime Dry, Wet Liquid Temp. Size Ship Wt.
23 gpm (87 lpm) Bronze Neoprene, Nitrile Stainless Steel Face or Lip Type Nitrile 1" NPT(F) 26 psi or 60 ft of Head 8-10 ft (2.4-3m), 20-22 ft (4.6-6.7m) 45-160˚F (8-70˚C) Neoprene 50-160˚F (10-82˚C) Nitrile 3 9/16" x 4 3/4" x 6 5/16" (90 x 120 x 159mm) 5.8 lbs (2.6 kg)
777-9001
1160 RPM
1750 RPM
500 RPM
29
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 30
Bronze Pumps 6400 Bronze Pedestal Pump Models
6400-0004 6400-0051
Neoprene Impeller Neoprene Impeller
Full Cam Half Cam
Use where bronze material, self-priming and debris tolerance is desired. Nitrile impeller 836-0003 is ideal for oil based products. Natural rubber impeller 836-0003 available separately for temperatures between 17-120˚F. Reduce flow 40% for half cam operation. Use face seal to extend pump life. Do not pump gasoline or other flammable liquids. DO NOT RUN DRY. 6400-0004
1750 RPM 1160 RPM
SPECIFICATIONS Open Flow Body Material Impeller Material Shaft Material Shaft Seal Shaft Diameter Port Size Maximum Pressure Prime Dry, Wet Liquid Temp. Size Ship Wt.
62 gpm (235 lpm) Bronze Neoprene Bronze carbon ceramic face type 1" 1 1/4" NPT(F) 26 psi (1.8 bar) or 60 ft of head 8-10ft (2.4-30m), 15-22 ft (4.6-6.7m) 45-180˚F (8-70˚C) Neoprene 50-180˚F (10-82˚C) Nitrile 4 7/8" x 5 7/8" X 8 1/16" (123 x 149 x 204m) 10.5 lbs (4.8 kg)
18370 Bronze Pedestal Pump Models 18370-0000
Neoprene Impeller
Use where bronze material, self-priming, up to 83 gpm flow, debris tolerance and adaptability to a specific flow is desired. Neoprene for water and general purpose pumping. Do not pump gasoline or other flammable liquids. DO NOT RUN DRY. 18370-0000
30
SPECIFICATIONS Open Flow Body Material Impeller Material Shaft Material Shaft Diameter Shaft Seal Material Port Size Maximum Pressure Prime Dry, Wet Liquid Temp. Size Ship Wt.
83 gpm (314 lpm) Bronze Neoprene Bronze 1" Carbon Ceramic Face 2" NPT(F) 30 psi (2.1 bar) or 70 ft of head 8-10 ft (2.4-3m), 15-22 ft (4.6-6.7m) 45-180˚F (8-70˚C) 5 1/8" x 8" x 10 7/8" (129 x 202 x 275mm) 19 lbs (8.6 kg)
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 31
Bronze Pumps 11860 Bronze Pedestal Pump Models
11860-0005 11860-0045
Nitrile Impeller Nitrile Impeller
Double Groove Single Groove
A multi-purpose pump widely used in agriculture and utility pumping. Mounted on tractors or under the hood on work vehicles for pumping water for livestock, pumping from shallow wells, draining excavations. Handles many fertilizers and insecticides. SPECIFICATIONS Open Flow Body Material Impeller Material Shaft Material Shaft Seal Shaft Seal Material Pulley Diameter Belt Port Size Clutch Voltage Maximum Pressure Liquid Temp. Size Ship Wt.
23 gpm (87 lpm) Bronze Nitrile Bronze carbon ceramic face type Nitrile 7” 2 groove A section 1 groove B section 1" NPT(F) 12V DC 26 psi (1.8 bar) or 60 ft of head 50-180˚F (10-82˚C) 3 13/16" x 4 1/8" x 4 1/2" (96 x 103 x 113mm) 15 lbs (6.8kg)
11860-0005
11870 Bronze Pedestal Pump Models
11870-0005 11870-0045
Nitrile Impeller Nitrile Impeller
Double Groove Single Groove
A multi-purpose pump widely used in agriculture and utility pumping. Mounted on tractors or under the hood on work vehicles for pumping water for livestock, pumping from shallow wells, draining excavations, meter boxes and remote irrigation. Handles many fertilizers and insecticides. Also used in processing plants for standby transfers or as feed pumps for oil/water separators with nitrile impeller. SPECIFICATIONS Open Flow Body Material Impeller Material Shaft Material Shaft Seal Pulley Diameter Belt Port Size Clutch Voltage Maximum Pressure Liquid Temp. Size Ship Wt.
11870-0005
62 gpm (235 lpm) Bronze Nitrile Bronze carbon ceramic 7" 2 groove A section 1 groove B section 1 1/4" NPT(F) 12V DC 30 psi (2.1 bar) or 70 ft of head 50-180˚F (10-82˚C) 6 1/16" x 5 7/8" x 8" (153 x 148 x 202mm) 20 lbs (9.0 kg)
31
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 32
Bronze Pumps 18330 Bronze Pedestal Pump Models
18330-0000 Nitrile Impeller 18330-0040 Nitrile Impeller
Double Groove Single Groove
A multi-purpose pump widely used in agriculture and utility pumping. Mounted on tractors or under the hood on work vehicles for pumping water for livestock, pumping from shallow wells, draining excavations and meter boxes. Handles many fertilizers and insecticides. Also used in processing plants as feed pumps for oil/water separators with nitrile impeller. SPECIFICATIONS 18330-0000
Open Flow
83 gpm (314 lpm)
Body Material
Bronze
Impeller Material
Nitrile
Shaft Material
Bronze
Shaft Seal
Carbon Ceramic Face
Pulley Diameter
7"
Belt
2 Groove A Section 1 Groove B Section
32
Port Size
2" NPT(F)
Clutch Voltage
12V DC
Maximum Pressure
30 psi (2.1 bar) or 70 ft of Head
Liquid Temp.
50-180˚F (10-82˚C)
Ship Wt.
29.0 lbs (13.2 kg)
Size
5 1/8" x 8" x 11 1/8" (129 x 202 x 282mm)
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 33
Oil Change System Porta-Quick Oil Change System ■ “Porta-Quick gives you quick, easy and clean oil changes with the flip of a switch.” ■ It removes oil and sludge through the dipstick tube making engine oil changes quick and easy without getting under the engine. ■ The oil changer comes with a 40" dipstick probe and a female garden hose connector to attach the suction hose directly to dipstick tubes supplied with male garden hose threads. Reversible pump allows the container to be emptied neatly and easily reversing the flow direction and pumping the container dry. ■ Built-in retractable pour spout is also provided. Pump is powered by the vehicle battery and comes with an 8 ft cord and alligator clips. To operate, simply connect the power cable to the vehicle battery. Then, with a flick of the switch, pump drains crankcase oil into the 14 quart Porta-Quick bucket.
17800-2000
SPECIFICATIONS Model
17800-2000 Oil Change System
Size
13 5/8” x 13 1/2” x 13 1/2” (346 x 343 x 343mm)
Ship Wt.
9.0 lbs (4.1 kg)
Self-Priming Electric Drill Pump Model 17250-0003 Chucks into a standard 1/4" or 3/8" drill motor and pumps up to 3.5 gpm (13 lpm). Use for utility pumping and scavenging jobs around the house, shop, and farm. Included with pump are two 3/4” garden hose adapters. Order 17255-0003 for replacement impeller and shaft assembly.
17250-0003
Model 17215-0000 Oil Change Kit This self-priming drill pump kit is the same utility pump as 17250-0003 but includes all the accessories required for changing engine oil through the dipstick tube. Includes 3 feet of 1/2" hose, probe adapter and 1/4" x 40" dipstick probe and two 3/4" garden hose adapters. Packed in a poly bag with display header card.
17215-0000
SPECIFICATIONS Standard Carton
12 Kits
Ship Wt.
7.5 lbs (3.4 kg)
33
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 34
Centrifugal Pumps 18510 Bronze Centrifugal Pump Models
18510-0000
18510-0000 18510-0001 18510-0020 18510-0021 18510-0010
12V DC Lip Seal 24V DC Lip Seal 12V DC Face Seal 24V DC Face Seal 12V DC Face Seal
Standard Duty Standard Duty Standard Duty Standard Duty Heavy Duty
Designed for cooling tower circulation, heat exchangers, air scrubbers, processing systems. Centrifugal pumps offer a smooth, non-pulsating flow, which can be regulated from near zero to the maximum for that pump without damage. Discharge port can be rotated to various positions for ease of piping. Easily disassembled for quick service. Derate open flow performance 25% for standard duty face seal models. SPECIFICATIONS Open Flow Body Material Impeller Material Seal Shaft Port Size Motor Size Ship Wt.
20 gpm (76 lpm) Bronze Bronze Viton Lip or Carbon-Ceramic Face Type Stainless Steel 3/4" NPT(F) PMDC, TENV Ignition Protected 7 1/16" x 4" x 4 1/16" (178 x 100 x 102mm) 5 lbs (2.3 kg) standard duty 8 lbs (3.6 kg) heavy duty
18580 Bronze Centrifugal Pump Models
18580-0000
18580-0000
Lip Seal
Designed for cooling tower circulation, heat exchangers, air scrubbers, processing systems. Centrifugal pumps offer a smooth non-pulsating flow, which can be regulated from near zero to the maximum for that pump without damage. Discharge port can be rotated to various positions for ease of piping, and easily disassembled for quick service. Derate open flow performance 25% for standard duty face seal models. SPECIFICATIONS Open Flow Supply Voltage Body Material Impeller Material Seal Port Size Motor Size Ship Wt.
34
115V AC
23 gpm (87 lpm) 115V AC 60 Hz Single Phase Bronze Bronze Viton Lip Type 3/4" NPT(F) 1/8HP TENV AC Induction Type 10" x 5 5/8" x 5 5/8" (252 x 142 x 142mm) 14.3 lbs (6.5 kg)
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 35
Centrifugal Pumps JSP03 & JSP07 Pumps Models
JSP0311ATF JSP0711ATF
35 gpm 55 gpm
Submersible sump pumps with float switch for automatic operation. Pumps are lightweight, portable and easy to service. Will handle up to 3/8" diameter solids. Motor is permanently lubricated for extended service and rated for continuous operation. Stainless steel housing and pump shaft. SPECIFICATIONS Open Flow Voltage Body Material Impeller Material Shaft Material Discharge Port Size Maximum Head Max. Liquid Temp Min. ON Level Min. OFF Level Minimum Basin Level Minimum Basin Diam. Float Style Motor
Cord Length Maximum Amp Approvals Liquid Temp. Maximum Pressure Size Ship Wt.
35 gpm (133 lpm) & 55 gpm (209 lpm) 115V AC 60Hz single phase glass-filled thermoplastic glass-filled thermoplastic 416 stainless steel 1 1/2" NPT(F) JSP03, 20 feet (6.1 m) JSP07, 34 feet (10.4 m) 104˚F (40˚C) JSP03, 11” (277 mm) JSP07, 12 1/2” (318 mm) JSP03, 5” (126 mm) JSP07, 6 1/2” (165 mm) 5” (127 mm) 12” (305 mm) piggyback wide angle 1/3 HP permanent split capacitor type, JSP03 3/4 HP permanent split capacitor type, JFP07 overload protected with automatic reset class F insulation, continuous duty heavy duty ball bearing construction 20 feet (6m) JSP03, 1/3 HP, 115V 2.8 amps JSP07, 3/4 HP, 115V 6.6 amps cCSAus, UL 50-104º F (10-40º C) 30 psi or 70 ft lift JSP03, 9 3/4" x 6 1/8" x 6 1/8" (248 x 156 x 156mm) JSP07, 11 1/4" x 6 1/8" x 6 1/8" (286 x 156 x 156mm) JSP03, 11.5 lbs (5.2 kg) JSP07, 15.5 lbs (7.0 kg)
JSP03
Consult factory for 220vac models.
59500 Mag Drive Centrifugal Pump Model
59500-0012 59500-0024
12V DC 24V DC
Compact, robust, high flow, long life circulating pump for use with hot water systems, heating systems, windshield washing and applications where re-circulation is required. Direct replacement for Johnson CO10P5-2 and CM10P7-1 Pumps. SPECIFICATIONS Open Flow Pump Type Voltage Body Material Coupling Port Size Motor Liquid Temp. Maximum Pressure Size Ship Wt.
3.9 gpm (14.8 lpm) at 4 feet of lift centrifugal 12V DC or 24V DC plastic magnetic drive 3/4" (19 mm) hose barb PMDC, 2500 hour nominal life, IP53 enclosure rating 3 amps Fuse for 12V model, 1.5 amps Fuse for 24V model 212º F (100º C) 2.8 psi, 6.5 ft of lift 5 1/4" x 3 3/8" x 2 1/2" (133 x 86 x 63mm) 1.5 lbs (.7 kg)
59500-0012
35
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 36
Drum Pumps Drum Pump Motor Heavy duty motor has extra large handle for work with gloved hands. 20 ft power cord with grounded 3 prong plug. Power switch guard prevents inadvertant operation. Built-in circuit breaker is reset by toggling the power switch to off, then on. Optional Low Voltage Safety Shut-Off (LV) sets motor to "OFF" if power is lost. Motor will not turn on unexpectedly if power is restored after a power failure. Toggle power switch to restore normal operation. Self-aligning motor coupling makes pump tube easy to attach. Optional CE. SPECIFICATIONS Motor Type
115V AC and 220V AC 50/60 Hz, 600 Watts
Motor Brushes
replaceable
Nominal Amp Draw
5.8 amps for 115V AC models
fan cooled, thermal protection
3.0 amps for 230V AC models Duty Cycle
intermittent
Approvals
CE some models
Enclosure
weather protected
Ambient Temperature 40-120˚F (4-53˚C) Wt.
Model No. 16450-0115 16450-1115 16450-2115 16450-0220
7.5 lbs (3.4 kg)
Power 115V AC 60 Hz 01 115V AC 60 Hz 01 115V AC 60 Hz 01 230V AC 50/60 Hz 01
Options CB CB, LV CB, LV, CE CB,
Plug US US US None
18753-0077 Chemically resistant plastic Adjustable Nozzle
16470-0000 Wall Mount Drum Pump Storage Bracket For easy storage when pump is not in use
18753-0080 Drum Pump Bung Adapter 2" allows pump tube to fi t snugly in 2" bung hole
36
16471-0000 Safety Ground Strap
16490-1000 Polypro Strainer - Gray 16490-1001 Tefzel Strainer - Black Blocks debris entry and protects pump impeller.
CE NO NO YES NO
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 37
Drum Pump Tubes Jabsco pump tubes easily handle a wide range of chemicals from strong acids and caustics to severe solvents and oils. Kynar is our most chemically resistant drum pump tube material. Hygienic models handle food and beverage grade liquids and are built with USDA approved materials. Select drum pump tube length and materials compatible with the container and fluid being pumped. Not recommended for viscosities over 3500 SSU. Sealless pump design provides up to 30 minutes of run dry operation. Pump Tubes
Tube Material
Length
Shaft
Impeller
Weight
Container
16400-3350
Polypropylene
35.5"
Carpenter 20
Tefzel
2.25 lbs
Drums (US)
16400-3270
Polypropylene
27.0"
Carpenter 20
Tefzel
2.25 lbs
Carboys
16400-3400
Polypropylene
40.0"
Carpenter 20
Tefzel
2.25 lbs
Drums (Euro)
16400-3470
Polypropylene
47.0"
Carpenter 20
Tefzel
2.25 lbs
Large Vats
16410-3350
Stainless Steel
35.5"
316 SS
Tefzel
7.5 lbs
Drums (US)
16410-3270
Stainless Steel
27.0"
316 SS
Tefzel
7.5 lbs
Carboys
16410-3400
Stainless Steel
40.0"
316 SS
Tefzel
7.5 lbs
Drums (Euro)
16410-3470
Stainless Steel
47.0"
316 SS
Tefzel
7.5 lbs
Large Vats
16510-3350
Hygienic SS
35.5"
Hygienic
Tefzel
7.5 lbs
Drums (US)
16510-3270
Hygienic SS
27.0"
Hygienic
Tefzel
7.5 lbs
Carboys
16510-3400
Hygienic SS
40.0"
Hygienic
Tefzel
7.5 lbs
Drums (Euro)
16510-3470
Hygienic SS
47.0"
Hygienic
Tefzel
7.5 lbs
Large Vats
16520-3350
Kynar
35.5"
Hastelloy
Tefzel
2.75 lbs
Drums (US)
16520-3270
Kynar
27.0"
Hastelloy
Tefzel
2.75 lbs
Carboys
16520-3400
Kynar
40.0"
Hastelloy
Tefzel
2.75 lbs
Drums (Euro)
16520-3470
Kynar
47.0"
Hastelloy
Tefzel
2.75 lbs
Large Vats
16440-0000 Air Motor Specifically designed to fit Jabsco drum pump tubes. Do not use where flammable vapors are present. Always use safety ground strap. SPECIFICATIONS Supply Motor Housing Air Inlet Valve Air Outlet Temperature Size Ship Wt.
Clean dry air, 15 cfm at 80 psi, 90 psi maximum inlet air pressure .36 HP at 8,000 RPM Cast iron body Cast aluminum end plates and adapter Bronze 1/4 turn ball valve 1/8" NPT(F) inlet Spun Wire Exhaust Muffler 40-120˚F (4-53˚C) 5 1/8” x 1 3/4” x 5 3/4” (129 x 45 x 146mm) 1.8 lbs (.8 kg)
37
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 38
LF Series Diaphragm Pumps Far and away the best selling small pump in the industry. Choose from standard models or configure to meet the special needs of your OEM application. Long-life (2000 hours typical) motors have either a chemically resistant plastic housing or a metal finned housing for maximum motor cooling. Flojet's new demand switch plus bypass configuration provides optimum operation and extended cycle-life under any field condition. OEM's appreciate features that save time and reduce cost. Features like built-in hose barb ports, flexible mounting feet, inline fuse, power connector, and manual on-off power switch. Need a reliable demand switch? Then it has to be completely sealed! Flojet's one-piece welded body design with epoxy potted spade terminals keep reliability in and the elements out. No other switch in the industry meets these stringent design criteria.
SPECIFICATIONS Open Flow High Cam
Voltage Body Material Diaphragm Material Check Valve Material Spring Material Port Size
1.0 gpm (3.8 lpm) high cam 0.7 gpm (2.7 lpm) low cam 12V or 24 V DC Polypropylene Santoprene or Geolast Viton or EPDM 316 Stainless Steel 3/8" (9.5mm)Hose Barb
Motor Recommended Fuse
PMDC Ball Bearing type with internal fan 5 amps for 12V models 3 amps for 24V models
Approvals Maximum Pressure Duty Cycle at 70ºF Liquid Temp
CE on RLF models 35 psi (2.4 bar) Intermittent 30 psi (2.0 bar) 110ºF (43ºC) Maximum
Size
LF11
Low Cam
LF12 Ship Wt.
38
LF11 LF12
2.6" H x 3.5"w x 6.8"L (66 x 89 x 173mm) 2.3" H x 3.5"w x 6.2"L (58 x 89 x 157mm) 1.9 lb (.9 kg) 1.3 lb (.6 kg)
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 39
PUMP SPECIFICATIONS Mode
Supply Voltage
Diaphragm Material
Check Valve
Cam
PUMP FEATURES Demand Bypass Switch Pressure
Motor Housing
Manual on/off
Inline Fuse
Power Connector
Thermal Approvals Protection
LF111421 LF121421 LF112421 LF122421
12 12 12 12
Santo Santo Santo Santo
Viton Viton Viton Viton
LO LO HI HI
40 40 40 40
55 55 55 55
metal fins plastic metal fins plastic
Y -Y --
Y -Y --
Y -Y --
-Y -Y
RLF111421 RLF121421 RLF112421 RLF122421
12 12 12 12
Santo Santo Santo Santo
Viton Viton Viton Viton
LO LO HI HI
40 40 40 40
55 55 55 55
metal fins plastic metal fins plastic
-----
Y -Y --
Y -Y --
Y Y Y Y
CE CE CE CE
RLF112422 LF111425 LF122025 LF152421
12 12 12 12
Santo EPDM Geolast Viton Geolast Viton Santo Viton
LO LO HI HI
40 40 -40
55 55 55 55
metal fins metal fins plastic plastic
Y Y -Y
Y Y -Y
Y -Y --
CE
Y -Y
RLF222422 RLF222421
24 24
HI HI
40 40
55 55
plastic plastic
---
---
---
Y Y
CE CE
LF111421 LF121421 LF112421 LF122421
Y Y Y Y
02 02 06 06
x
x x
RLF111421 RLF121421 RLF112421 RLF122421
Y Y Y Y
02 02 06 06
RLF112422 LF111425 LF122025 LF152421
Y Y Y Y
06 02 06 06
x x
x x
x x
x
RLF222422 RLF222421
Y Y
06 06
x x
x x
x x
x
Santo Santo
x x
EPDM Viton
x x
x
x x x
x x
x
x
x
x x
x x
x x x x
x x
x x x x
x x
x
x
x
x x
x
39
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 40
Duplex II Pumps The Duplex II pump incorporates many new design innovations: half-spherical check valves for improved priming and efficiency, an external bypass system that is located outside of the pumping chamber, and the demand models feature a sealed pressure switch and back flow preventer to reduce pulsations. Unique bypass system provides near-constant pressure to drive a wide range of nozzles for all your lawn, garden and agricultural spraying needs.
SPECIFICATIONS Open Flow Voltage Body Material Diaphragm Material Check Valve Material Port Size
2.0 gpm (7.6 lpm) max. 12V DC and 115V AC Polypropylene Santoprene, EPDM, Viton Viton 3/8" NPT(F)
Motor
permanent magnet, totally enclosed non-vented
Maximum Pressure Duty Cycle Suction Lift Liquid Temp
90 psi (6 bar) Intermittent Up to 8ft. (2.4m) vertical height 130ºF (54ºC) maximum
Size
100 & 80 psi demand pump 7.6" x 3.24" x 3.63" (193 x 82 x 92mm) 70 psi bypass pump 7.6" x 3.24" x 3.63" (193 x 82 x 92mm) 60 psi demand pump 8.0" x 3.31" x 3.26" (203 x 84 x 83mm) 4.5 lb. (2.0 kg) typical
Ship Wt.
40
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 41
PUMP SPECIFICATIONS Model
Supply Voltage
Demand Pump Performance
A
C
Diaphragm Material
Check Valve
Cam Angle
Demand Switch
Bypass Pressure
Motor Speed
Motor Length
D2135J7011 D2125F6011 D2125F5011 D2135F5011 D2124F5011 D2121F5011
12V DC EPDM 12V DC Santo 12V DC Santo 12V DC Santo 12V DC Santo 12V DC Santo
Viton Viton Viton Viton Viton Viton
high med med high med med
100 psi 80 psi 60 psi 60 psi 60 psi 60 psi
-------
high high high high high low
med med med med short short
D2132F1311 D2135F1311 D2121F1311 D2121F1211
12V DC 12V DC 12V DC 12V DC
Santo Santo Santo Santo
Viton Viton Viton Viton
high high med med
-----
50 psi 50 psi 50 psi 30 psi
low high low low
med med short med
D3835V5011 115V AC D3835V1311 115V AC
Viton Viton
Viton Viton
high 60 psi high --
-50 psi
high high
med med
D21X005 D21X007
Santo Santo
Viton Viton
high 60 psi high --
-50 psi
high high
short short
12V DC 12V DC
B
PUMP FEATURES Model
Open Flow gpm
Flow Curve
Manual On/Off
Inline Fuse
D2135J7011 D2125F6011 D2125F5011 D2135F5011 D2124F5011 D2121F5011
2.0 1.4 1.4 2.0 1.5 1.1
A B B A B C
-------
-------
wires wires wires wires wires wires
D2132F1311 D2135F1311 D2121F1311 D2121F1211
1.5 2.0 1.2 1.2
G H E F
-----
-----
wires wires wires wires
D3835V5011 D3835V1311
2.0 2.0
A H
---
---
6’ cord 6’ cord
D21X005 D21X007
1.5 2.0
B H
yes --
---
Bypass Pump Performance
E
F
G
Power Connection
2 pin plug 2 pin plug
H
41
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 42
Quad Sensor VSD Solid State microcontroller and firmware allow VSD pumps to provide constant pressure within their pumping range regardless of the number or size of nozzles operating at any time. Simulates a constant city-water-pressure type supply. Soft-start feature prevents splash. Unlike conventional pumps, the VSD is very quiet and draws very little current at low flow rates. Handles variable tip nozzles from full flow to shut off as well as multi-nozzle spray bars. VSD automatically shuts off if supply voltage falls below 8 volts to protect the vehicle battery. SPECIFICATIONS Pump Design Open Flow
R4400-504
Voltage Body Material Diaphragm Material Check Valve Material Port Size
R4400-503
Motor
permanent magnet DC totally enclosed non-vented double ball bearing thermal protection EMI filter
Regulated Pressure
R4400-503 25 psi (1.7 bar) R4400-504 30 psi (2.1 bar) intermittent 8' vertical lift nominal 130º F (54º C) CSA, CE
AMPS
Duty Cycle Suction Lift Dry Liquid Temp. Approvals Size
Ship Wt.
42
four piston diaphragm type R4400-503 0-3.7 gpm (14 lpm) R4400-504 0-4.5 gpm (17 lpm) 12-24V DC Polypropylene Santoprene Viton R4400-503 1/2" hose barb straight and elbow R4400-504 3/4" hose barb straight and elbow
R4400-503 3.75" x 6.3" x 9.0" (95 x 160 x 228mm) R4400-504 3.75" x 6.3" x 10.3" (95 x 160 x 261mm) R4400-503 4.3 lbs (2 kg) R4400-504 6.3 lbs (3 kg)
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 43
Quad Commercial Duty Models
4300-530 4100-521
12VDC 12VDC
S/V S/V
3C 3C
SW40 No Switch
Quad DC Commercial Duty SPECIFICATIONS Pump Design Open Flow Voltage Body Material Diaphragm Material Check Valve Material Port Size Motor
Pressure Duty Cycle Suction Lift Dry Liquid Temp. Approvals Size Ship Wt.
four piston diaphragm type 3.3 gpm (12.5 lpm) 12V DC Polypropylene Santoprene Viton 1/2" hose barb port and Quest, see accessories PMDC, totally enclosed non-vented, weather coating, thermal protection, metal baseplate 30 psi maximum Continuous 6' (1.8m) vertical lift 130º F (54º C) maximum CE 10.3" x 4.0" x 3" (261mm x 101mm x 76mm) 7 lbs (3.2 kg)
Quad AC Commercial Duty Models
4300-529
115V AC
S/V
3C
SW40
SPECIFICATIONS Pump Design Open Flow Voltage Body Material Diaphragm Material Check Valve Material Port Size Motor
Pressure Duty Cycle Suction Lift Dry Liquid Temp. Approvals Size Ship Wt.
four piston diaphragm type 3.3 gpm (12.5 lpm) 115V AC Polypropylene Santoprene Viton 1/2" hose barb ports see accessories permanent split capacitor AC type totally enclosed fan cooled thermal protection 6' power cord with 3 prong plug 30 psi maximum Continuous 25 psi (1.7 bar) at 70º F (21º C) 8' (2.4m) vertical lift 130º F (54º C) maximum CE 10.9" x 5.4" x 5.7" (276mm x 137mm x 145mm) 12 lbs (5.5 kg)
43
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 44
Quad Standard Duty Quad Standard Duty SPECIFICATIONS Pump Design Open Flow
four piston diaphragm type 4.8 gpm (18.2 lpm) 3.3 gpm (12.5 lpm) 12 or 24V DC 115V AC Polypropylene Santoprene or Geolast Viton or EPDM 1/2" or 3/4" hose barb see accessories PMDC totally enclosed fan cooled 30 psi maximum intermittent 30 psi (2.1 bar) at 70º F (21º C) continuous 15 psi (1.0 bar) at 70º F (21º C) 3 cam 8' (2.4m) vertical lift 2 cam 6' (1.8m) vertical lift 130º F (54º C) maximum 9.0" x 3.2" x 3.8" (228 x 81 x 96mm) 4 lbs (1.8 kg)
Voltage Body Material Diaphragm Material Check Valve Material Port Size Motor Pressure Duty Cycle
Suction Lift Dry Liquid Temp. Size Ship Wt.
PUMP SPECIFICATIONS Model
4100-143 4100-502 4100-142 4100-505 4300-143 4300-504 4300-142 4300-500 4300-342 4300-343 4100-343 4300-513
44
Supply Voltage
Diaphragm Material
12V DC Santo 12V DC Santo 12V DC Santo 12V DC Santo 12V DC Santo 12V DC Santo 12V DC Santo 12V DC Santo 24V DC Santo 24V DC Santo 24V DC Santo 115V AC Geolast
Check Valve
EPDM Viton EPDM Viton EPDM Viton EPDM Viton EPDM Viton EPDM Buna
Open Cam Flow Size
4.5 4.5 3.2 3.2 4.5 4.5 3.2 3.2 3.2 4.5 4.5 3.2
3 3 2 2 3 3 2 2 2 3 3 2
Off Pressure
Motor Type
Port Fittings
Thermal Protection
----45 45 45 45 45 45 -45
TEFC TEFC TEFC TEFC TEFC TEFC TEFC TEFC TEFC TEFC TEFC TEFC
3/4” Hose Barb 3/4” Hose Barb 1/2” Hose Barb 1/2” Hose Barb 3/4” Hose Barb 3/4” Hose Barb 1/2” Hose Barb 1/2” Hose Barb 1/2” Hose Barb 3/4” Hose Barb 3/4” Hose Barb 1/2” Hose Barb
Yes Yes No No No No No No No No No No
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 45
5100 Air Operated Diaphragm Pumps Flojet air operated diaphragm pumps offer excellent self-priming capability. Pumps can be located above the supply tank. Suction-side foot valve is recommended for best operation. Liquid pressure is regulated by supply air pressure. No bypass or pressure relief plumbing is necessary. Choice of Santoprene, Buna, or Viton elastomers provide a wide range of chemical compatibility. Quick disconnect liquid and gas port fittings provided for easy installation. Do not pump gasoline or other flammable liquids. SPECIFICATIONS Rated Flow Max Open Flow Gas/Air Pressure Gas/Air Consumption Gas/Air Supply Liquid Inlet Pressure Body Material Diaphragm Material Check Valve Material Port Size Dry Prime Wet Prime Max Liquid Temp Size Ship Wt.
Model Elastomer 5100-010
1 gpm (3.8 lpm) 1.9 gpm (7.2 lpm) 20 to 75 psi (1.4 to 5.3 bar) .45 CFM at 40 psi at 1 gpm .58 CFM at 60 psi at 1 gpm clean, dry, oil free 15 psi (1 bar) max Acetal Copolymer Santoprene, Buna or Viton Santoprene, Buna or Viton liquid ports 3/8" barb gas ports 1/4” barb 28 ft (8.5m) 32 ft (9.8m) 120º F (49º C) 4 1/32" x 2 3/8" x 6" (102 x 60 x 152mm) .6 lbs (.3 kg)
Liquid Ports
Gas Ports
Buna
3/8" plastic barb 1/4" plastic barb
5100-020
Viton
3/8" plastic barb 1/4" plastic barb
5100-040
Santo
3/8" plastic barb 1/4" plastic barb
45
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 46
G57 Air Operated Diaphragm Pumps Innovative compact design features a patented shuttle valve that eliminates stalling. Chemically resistant Polypropylene body with a choice of Santoprene or Viton elastomers. Over-size exhaust muffler provides quiet operation. Quick disconnect liquid and gas port fittings for easy installation. Do not pump gasoline or other flammable liquids.
SPECIFICATIONS Rated Flow Max Open Flow Gas/Air Pressure Gas/Air Supply Body Material Diaphragm Material Check Valve Material Spring Material Liquid Port Size Gas Port Size Dry Prime Wet Prime Liquid Temp Range Liquid Inlet Pressure Maximum Air Pressure Ship Wt.
Liquid Model Elastomer
46
Gas Ports
3.5 gpm (13.3 lpm) 5.0 gpm (19.0 lpm) 20 to 100 psi (1.4 to 7 bar) clean, dry, oil free Polypropylene Santoprene or Viton Santoprene or Viton Hastelloy 3/8" or 1/2" or 3/4" barb 1/4" poly or brass barb 15 ft (4.5m) 20 ft (6.1m) 40-120º F (4-49º C) 30 psi (2.1 bar) Max 100 psi (6.9 bar) 1.2 lbs (.6 kg)
Muffler Ports
Size
G575205
Santo
3/8" plastic
1/4" brass barb
Large
G575215
Santo
1/2" plastic
1/4" brass barb
Large
G575225
Santo
3/4" plastic
1/4" brass barb
Large
G575208
Santo
3/8" plastic
1/4" plastic barb
Large
G575218
Santo
1/2" plastic
1/4" plastic barb
Large
G575228
Santo
3/4" plastic
1/4" plastic barb
Large
G573205
Viton
3/8" plastic
1/4" brass barb
Large
G573215
Viton
1/2" plastic
1/4" brass barb
Large
G573225
Viton
3/4" plastic
1/4" brass barb
Large
G573208
Viton
3/8" plastic
1/4" plastic barb
Large
G573218
Viton
1/2" plastic
1/4" plastic barb
Large
G573228
Viton
3/4" plastic
1/4" plastic barb
Large
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 47
520 Extractor Dryer This two stage air quality filtration system removes harmful moisture and contaminants from compressed air lines. The first stage coalesces water droplets, oil and rust particles that clog air equipment. The second stage captures anything remaining. The result is clean, dry air and cost savings. Model 520B Side Ports SPECIFICATIONS Air Flow
15 SCFM
Maximum Pressure
250 PSIG
Filter
5 Micron
Ports
1/4" NPT
Service Kit
0155K
10-35@ Atmospheric Pressure
Torque
Manifold Bolts 30-50 in-lbs
Size
8 1/4" x 3" x 1 5/8"
Ship Wt.
Note: For best operation, we recommend the Extractor Dryer to be installed as close as possible to the machine or air tools being used.
47
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 48
Accessories and Fittings Inlet Strainers
Electric Pump Fittings
1745 Series PETG Viton
Nylon Barbed Straight/Elbow For use with all Pentaflex Series (3/8” NPT only)
■ New PETG cover for improved chemical resistance. ■ Viton o-ring is standard. ■ Low profile design for space saving installation. ■ Very strong reinforced plastic base with clear cover. ■ Wide variety of port configurations from 3/8” to 3/4.”
SPECIFICATIONS Materials Base Cover Screen O-rings Temperature
Polypropylene, black PETG, Glycol-modified polyester terephthalate Stainless Steel 40 mesh Viton
Part Number Elbow Description 91010-033 3/8” NPT Male x 1/4” Barb 91010-003 1/4” NPT Male x 3/8” Barb 91010-001 3/8” NPT Male x 3/8” Barb 91010-025 1/4” NPT Male x 3/8” Barb 91010-005 3/8” NPT Male x 1/2” Barb 91010-052 1/4” NPT Male x 1/4” Barb
Plastic (Polyproylene Body, Viton O-ring) Inlets & Outlets Part No. Straight 20381-015 20381-033 20381-014 20381-017 20381-018 20381-032
Quad Port
Model No. 01745-010 01745-012 01745-023
Part No. Straight 91010-032 91010-004 91010-002 91010-034 91010-006 91010-053
For use with all Quad Series Pumps.
160˚F (70˚C) max.
Styles Available Duplex * 3/8 NPT
and Duplex II Series Pumps (3/8” NPT only).
Description Quad x 3/4” hose barb, Viton o-ring, PETG cover Quad x 1/2” hose barb, Viton o-ring, PETG cover 3/8” NPT (M) x 3/8” hose barb, Viton o-ring, PETG cover *3/8” NPT (M) fits all Duplex II models
Description Quad x 1/2” hose barb straight, Viton o-ring Quad x 5/8” hose barb straight, Viton o-ring Quad x 3/4” hose barb straight, Viton o-ring Quad x 1/2” hose barb elbow, Viton o-ring Quad x 3/4” hose barb elbow, Viton o-ring Quad x 3/4” garden hose adapter, Viton o-ring
Other Elastomers Available Packaged 2 per bag. ALSO AVAILABLE IN 3/8” & 1/2” NPT (M).
Gas Pump Liquid Fittings Stainless Steel Inlets & Outlets For use with all 5100 Series Pumps.
1/2 Hose Barb 3/4 Hose Barb
Part No. Part Number Straight Elbow 20324-030 20607-100 20325-030 20608-100 20606-100
Inlet Strainer (Plugs into Quad pump port)
Description 1/4” Hose Barb 3/8” Hose Barb 1/2” Hose Barb
Gas Pump Air Fittings Brass CO2/Air Inlets with Shutoff Valve For use with all 5100 and G57 Series Pumps. 3/8 Hose Barb 1/2 Hose Barb 3/4 Hose Barb 1/2 - 14 Straight
In-Line Strainer Model No. 01745-000 01745-002
3/8 NPT
Description Inline strainer, 3/4” hose barb x 3/4” hose barb, Viton o-ring, PETG cover Inline strainer, 1/2” hose barb x 1/2” hose barb, Viton o-ring, PETG cover
Part No. 01510-000 01520-000 01521-000
Plastic (Celcon) Inlets 5100 and Part No. 20325-033
48
Description 1/4” Hose Barb, Straight 1/4” Hose Barb, Tee 1/4” Hose Barb, Elbow
CO
2/Air For use with all G57 Series Pumps.
Description 1/4” Hose Barb, Straight
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 49
Manual Operated Hand Pumps
Ultimate heavy duty hand pump for utility and emergency uses. Made with long-life brass cylinders, high quality oil resistant plungers and impact absorbing end caps. Pumps never need coaxing and give full suction on the first stroke. Can be used in any position. Available in 5 sizes. Units are supplied with varying lengths of hose. Normal pumping capability is 30 strokes per minute.
Model No. 34060-0010 33799-0000 33760-0000 33745-0000 33965-0000
Weight in lbs 1.0 2.0 2.5 4.0 6.0
Connection Size .5" .5" .5" 1" 1.25"
Overall Length 10.0" 12.0" 17.0" 22.5" 24.0"
Cylinder Diameter 1.25" 1.25" 1.25" 1.75" 2.50"
Strokes Per Gallon 40 26 15 7 3
49
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 50
Blowers Flangemount Blower Flangemount Blowers are generally mounted with discharge port fastened directly to a flat external surface to minimize required ducting. The inlet port can then be connected with duct hose to the area requiring ventilation. Standard models are rated for intermittent service, 15 minutes maximum. Commercial duty models are rated for continuous service. Do not use where flammable vapors are present. Explosion and death can occur. Model
AIR FLOW CFM CUCM/sec
Volts
Amps
Fuse Size
Inlet inches (mm)
Outlet inches (mm)
height
Dimensions (mm) width
length
Weight lbs (kg)
Standard Duty 34744-0000 35115-0020 34739-0010 34739-0020 34739-0031 35400-0000 35400-0010
100 105 150 150 140 250 250
47,200 49,600 70,800 70,800 66,000 118,000 118,000
115V AC 12V DC 12V DC 24V DC 115V AC 12V DC 24V DC
0.7 4.4 6.5 3.3 1 10 5.3
0.8 6 10 5 1.3 15 7.5
3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 4 (101.6) 4 (101.6)
2 3/4 (70) 2 3/4 (70) 2 3/4 (70) 2 3/4 (70) 2 3/4 (70) 3 5/8 (91) 3 5/8 (91)
7 5/8 (193) 5 1/2 (140) 7 5/8 (193) 7 5/8 (193) 7 5/8 (193) 9 (229) 9 (229)
6 5/8 (168) 4 3/4 (121) 6 5/8 (168) 6 5/8 (168) 6 5/8 (168) 8 3/4 (222) 8 3/4 (222)
7 (175) 6 3/4 (171) 8 (203) 8 (203) 8 3/8 (213) 8 3/4 (222) 8 3/4 (222)
5 (2.3) 4 (1.8) 5 (2.3) 5 (2.3) 5 (2.3) 6 (2.7) 6 (2.7)
Commercial Duty 35760-0092 35760-0094 36760-0115
250 250 250
118,000 118,000 118,000
12V DC 24V DC 115V AC
11 6 1.5
15 10 3
4 (101.6) 4 (101.6) 4 (101.6)
3 5/8 (91) 3 5/8 (91) 3 5/8 (91)
9 (229) 9 (229) 9 (229)
9 7/8 (230) 9 7/8 (230) 9 7/8 (230)
8 3/4 (222) 8 3/4 (222) 8 3/4 (222)
6 (2.7) 6 (2.7) 9 (4.1)
Flexmount Blower Flexmount blowers have both inlet and outlet ports designed for slip-on flexible duct connections. They are ideal when an in-line installation is preferred. The blower may be rotated in the mounting bracket to orient the discharge port in any direction. Standard duty blowers are rated for intermittent service, 15 minutes maximum. Commercial duty models are rated for continuous service. Do not use where flammable vapors are present. Explosion and death can occur. Model
AIR FLOW CFM CUCM/sec
Volts
Amps
Fuse Size
Inlet inches (mm)
Outlet inches (mm)
height
Dimensions (mm) width
length
Weight lbs (kg)
Standard Duty 34754-0000 35115-0010 36740-0010 36740-0020 36740-0031 35400-0000 35400-0010
100 105 150 150 140 250 250
47,200 49,600 70,800 70,800 66,000 118,000 118,000
115 VAC 12 VDC 12 VDC 24 VDC 115 VAC 12 VDC 24 VDC
0.7 4.3 6.8 3.3 1 10 5.3
0.8 6 10 5 1.3 15 7.5
3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 4 (101.6) 4 (101.6)
2 3/4 (70) 2 3/4 (70) 2 3/4 (70) 2 3/4 (70) 2 3/4 (70) 3 5/8 (91) 3 5/8 (91)
7 5/8 (193) 5 1/2 (140) 7 5/8 (193) 7 5/8 (193) 7 5/8 (193) 9 (229) 9 (229)
6 5/8 (168) 4 3/4 (121) 6 5/8 (168) 6 5/8 (168) 6 5/8 (168) 8 3/4 (222) 8 3/4 (222)
7 (175) 6 3/4 (171) 8 (203) 8 (203) 8 3/8 (213) 8 3/4 (222) 8 3/4 (222)
5 (2.3) 4 (1.8) 5 (2.3) 5 (2.3) 5 (2.3) 6 (2.7) 6 (2.7)
Commercial Duty 35770-0092 35770-0094 36770-0115
250 250 250
118,000 118,000 118,000
12 VDC 24 VDC 115 VAC
11 6 1.5
15 10 .75
4 (101.6) 4 (101.6) 4 (101.6)
3 5/8 (91) 3 5/8 (91) 3 5/8 (91)
9 (229) 9 (229) 9 (229)
9 7/8 (230) 9 7/8 (230) 9 7/8 (230)
8 3/4 (222) 8 3/4 (222) 8 3/4 (222)
6 (2.7) 6 (2.7) 9 (4.1)
50
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 51
Blowers Compact High Efficiency In-line Blower Robust continuous duty nickel-plated motor with double sealed motor shaft protects against moisture and provides greater flow with less noise and lower amp draw. Motors are ignition protected to ISO 8846 Standard. Inlet and outlet duct locking tabs for secure attachement. Easily mounts to any flat surface. Do not use where flammable vapors are present. Explosion and death can occur.
Model
30480-0000 30480-0024 30500-0000 30500-0024
AIR FLOW CFM m 3/min 135 135 235 235
3.8 3.8 6.7 6.7
Volts
12V DC 24V DC 12V DC 24V DC
Amps
4.3 1.7 4.3 1.7
Fuse Size
Inlet inches (mm)
Outlet inches (mm)
height
Dimensions (mm) width
4 2.5 7 4
3 (75) 3 (75) 4 (100) 4 (100)
3 (75) 3 (75) 4 (100) 4 (100)
5 1/4 (130) 5 1/4 (130) 5 1/4 (130) 5 1/4 (130)
3 3/16 (95) 3 3/16 (95) 4 3/16 (120) 4 3/16 (120)
length
Weight lbs (kg)
5 (125) 5 (125) 6 (150) 6 (150)
1.2 (.5) 1.2 (.5) 1.3 (.6) 1.3 (.6)
In-line Blower High capacity in-line blowers are compact and easy to install. Ideal where space is limited. Both models are less than 7 inches long. Can be installed in any position and fastened to any solid surface.
Do not use where flammable vapors are present. Explosion and death can occur.
Model
30460-0012 30490-0012
AIR FLOW CFM CUCM/sec 140 240
66,000 113,300
Volts
12V DC 12V DC
Amps
5 5
Fuse Size 6 6
Inlet inches (mm) 3 (76.2) 4 (106.6)
Outlet inches (mm) 3 (76.2) 4 (106.6)
height
Dimensions (mm) width
4 3/8 (111) 4 3/8 (111)
5 1/4 (134) 5 1/4 (134)
length 6 7/8 (175) 6 7/8 (175)
Weight lbs (kg) 2 (.9) 2 (.9)
51
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 52
Blower Accessories Blower Intake Screen Inlet screens 34764-0000 provides an attractive and protective blower cover. Designed to slip over the inlet on all 3" (76mm) blowers where the rotor is exposed in operation. The fine mesh safety screen prevents foreign objects from damaging the blower wheel. Chrome plated bezel and stainless steel screen. 34764-0000 Weight .65 lb (0.3kg)
Flangemount Adapter Collars Model 34943-0000 converts 3" flangemount inlet port into a bulkhead fitting for wall mount installations. Use on all 3" flangemount models 34744, 35115, and 34739. Model 34856-0000 converts 3" flangemount outlet port into a 3" flexible duct fitting for wall mount installations. Use on all 3" flangemount models 34744, 35115, and 34739. 34393-0000
34856-0000
Weight .5 lb (.2 kg)
Flexible Blower Ducting Plastic 3" and 4" flexible blower ducting is reinforced to maintain shape and maximum inside diameter through very tight bends. Easy to cut and install. Sold in 50 foot (15m) coils only. This ducting will not support flame.
52
Model
Inside Diameter
Weight
34959-0100
3"
10 lbs (4.5 kg)
34959-0200
4"
14 lbs (6.3 kg)
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 53
High Performance Search Lights High performance remote control search lights for recreation, home or industry. Easy to replace sealed beam halogen lamps. Includes remote control joy stick and 15 feet (4m) of cable. Optional 15 foot extension harness and secondary remote control kit. 320 degree horizontal rotation. 75 degress of vertical sweep. All materials are non-corrosive.
60020 Plastic Search Lights Model 60020-0000 60020-0024
Series 135 SL RC 135 SL RC
Supply 12VDC 24VDC
Fuse 10 amp 5 amp
1 LUX 865 ft (262m) 865 ft (262m)
Candle Power 100,000 100,000
Size 7 7/8" x 7" x 8" 7 7/8" x 7" x 8"
Weight 6 lbs (2.7 kg) 6 lbs (2.7 kg)
60080-0012 60080-0024
146 SL RC 146 SL RC
12VDC 24VDC
10 amp 5 amp
865 ft (262m) 865 ft (262m)
175,000 175,000
9" x 8 1/2" x 10" 9" x 8 1/2" x 10"
9 lbs (4 kg) 9 lbs (4 kg)
18753-0178 Replacement sealed beam, 12/24 VDC for 135 Series 18753-0455 Replacement sealed beam, 12/24 VDC for 146 Series 43990-0014 Extension harness, 15 foot, (4.5m) 43670-0005 Secondary remote kit for 135 Series 43670-0004 Secondary remote kit for 146 Series
62022 Heavy Duty Chrome Search Light Heavy duty 5" diameter remote control search light for hobby, home or industry. Spot and flood beams. Variable speed control for fast search and precise targeting. Internal brake holds beam firmly on target. Heavy chrome on allbrass housing and base. Easy to replace sealed beam halogen lamps. Includes remote control joy stick and 8 feet (2.5m) of cable. Optional 15 foot extension harness. Optional secondary remote control kit. 450 degree horizontal rotation. 70 degrees of vertical sweep. Model 62022-4002
Series Supply 130
12VDC
Fuse
1 LUX
10 amp
990 ft (300m)
Candle Power Spot Flood 50,000 100,000
Size
Weight
7" x 5" x 9"
7.5 lbs (3.2kg)
67296-0000 Replacement sealed beam, 12 VDC for 130 Series 43670-0004 Secondary remote kit for 130 Series, 5" diameter Search Light 43990-0014 Extension harness, 15 foot, (4.5m)
60020-0000
60080-0012
62022-4002
53
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 54
High Performance Search Lights 155 SL RC Searchlight Our new leading light for style, performance and value. Fingertip control of the watertight halogen sealed beam will pick out hazards nearly 900ft away . ■ Easily replaceable 5" (130mm) halogen sealed beam delivers 100,000 candlepower. ■ 1 lux at 885 ft (268 m). ■ Full 320° horizontal rotation, 75° vertical sweep. ■ Complete with joystick remote control (12 Volt dc model) or optional touch-pad remote control including joystick (12/24 Volt dc). ■ Electronic control includes automatic 20° sweep feature, two speed movement - Fast for searching, Slow for pinpointing target. ■ Complete with 15ft (4.5m) cable, with optional extension cables. ■ Tough thermoplastic housing and base. ■ Optional secondary remote control panel for dual stations. Size:
6 3/8" wide x 8" long x 8" high (16cm x 20cm x 20cm) Weight: 5lb (2.3kg) 61050-0012 12 Volt dc, fuse 10 amp. 61050-1224 12/24 Volt dc, fuse 10 amp (electronic control) 18753-0528 Replacement sealed beam 12/24 Volt dc, 100,000 cp. Secondary Remote Control Kits: for 61050-0012 use kit 43670-0004. Secondary Remote Control Kits: for 61050-1224 use kit 64044-0000.
6" (150 mm) RC Searchlight
63022 and 63042
Brilliant Remote Control Searchlights with digital multi-function processor control, plus option HID (High Intensity Discharge) light source. Truly the ultimate searchlight. 1 lux at 2210ft (680 m) - HID models with 600,000 candlepower spot beam. 1 lux at 1380ft (418 m) - Sealed beam models with 200,000/50,000 candlepower spot/flood beam. ■ Full 360° horizontal rotation, 70° vertical sweep. ■ Water resistant electronic touch-pad remote control including joystick option. ■ Automatic 20° sweep search feature. ■ Two-speed movement - Fast for searching, Slow for pinpointing target. ■ Complete with 15ft (4.5m) cable, with optional extension cables. ■ Exceptionally durable chrome on brass housing and base (except 63020 - chrome on zinc base) ■ Optional secondary electronic remote control panel for dual stations. Provides instant command from each panel without need to select station. Order kit 64044-0000. Size:
63020
Extension Harness
Weight : 63042-0012 63042-0024 63022-0012 63020-0012 64046-0007 64046-0008 64046-0006
11" long x 6" wide x 13" high (28cm x 15cm x 33cm ) except 63020 - 9" (23cm) high. 11lb (5kg) 12 Volt dc HID, fuse 15 amp. 24 Volt dc HID, fuse 20 amp. 12/24 Volt dc sealed beam, fuse 15 amp. 12/24 Volt dc sealed beam, fuse 15 amp. Replacement HID bulb, 12 Volt dc, 600,000 cp. Replacement HID bulb, 24 Volt dc, 600,000 cp. Replacement sealed beam 12/24 Volt dc, 200,000/50,000 cp.
(Electronic Controls)
Extension harnesses enable remote controls to be fitted further from the light than standard cables allow, and are needed to install secondary remote control kits. For 155SL (12/24 Volt dc) and all 6" (150mm) RC models: 64042-1011 10ft (3m) harness 64042-1007 15ft (4.5m) harness 64042-1008 25ft (7.6m) harness 64042-1009 50ft (15.2m) harness.
54
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 55
High Performance Search Lights Floodlights - New Ultra Bright Model A range of compact, purpose designed floodlights. ■ Special trapazoidal beam pattern designed to be mounted above one end of horizontal area to be illuminated, spreads light evenly over the surface. ■ Sharp cut off enables accurate selection of area to be illuminated minimizing stray light. ■ Blue Bulb technology improves visibility in low light conditions. ■ Sealed beam tungsten halogen bulb, with 450 hour average life. ■ Choice of white or black tough polypropylene housing. ■ Stainless steel universal mounting bracket. Size Weight 45900-4000 45900-5000 45900-0000 45900-2000 45900-0001 45903-4000 45903-0000 45903-0001
Size: Weight: 45900-1000 45900-3000 45903-0002
4" long x 6" wide (155cm x 101cm). 1.4lb (0.7kg) 12 Volt dc Ultra Bright white, fuse 6 amp. 12 Volt dc Ultra Bright black, fuse 6 amp. 12 Volt dc white, fuse 6 amp. 12 Volt dc black, fuse 6 amp. 24 Volt dc white, fuse 3 amp. Replacement sealed beam, 12 Volt dc, 65 watt. Replacement sealed beam, 12 Volt dc, 30 watt. Replacement sealed beam, 24 Volt dc, 60 watt. 3" long x 5" wide, (127mm x 77mm). 1lb (0.5kg). 12 Volt dc white, fuse 6 amp. 12 Volt dc black, fuse 6 amp. Replacement sealed beam, 12 Volt dc.
Hand Light Ideal for temporary work and recreation area lighting. ■ Dual purpose spot or flood beam. ■ Up to 1/2 mile spot beam. ■ Flood beam that covers 100 sq.ft of working area. ■ Black powder coated housing, wire lens guard. ■ Adjustable bracket for vertical positioning. ■ Uses a 7 1/2 volt, 20 cell power battery (not included). Size: Weight: 41075-2000 98039-0010
7" x 12" x 9" 1 3/4 lb less battery. 9lb with battery. Battery powered hand light Replacement bulb.
Popular Battery Manufacturers: Part No. MFG or Brand No. 715 Eveready M903 Mallory 4F-58 Burgess No.155 Bright Star
55
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 56
Jabsco Parts Reference Guide Flexible Impeller Compounds JABSCO flexible impellers are available in the following materials: 1. NEOPRENE is the standard impeller material used in most flexible impeller pumps. It offers a wide range of chemical resistant properties. Temperature range: 45°F to 180°F. 2. NITRILE impellers offer compatibility with oil products. It handles a wide range of oils, oil and water emulsions, diesel fuel, lower fraction hydrocarbons, kerosene, lubricating and machine cutting oil. Lower temperatures affect priming ability and performance characteristics. Generally, nitrile performance is 10% below that of neoprene. Temperature range: 50°F to 180°F. 3. VITON impellers are recommended when pumping hydrocarbons, solvents and severely corrosive chemicals. Viton is not recommended for low temperature or high pressure applications. Temperature range: 60°F to 180°F. 4. SANITARY NEOPRENE impellers are used in hygienic flexible impeller pumps for applications pumping food, beverage and pharmaceutical products. Temperature range: 45°F to 165°F. 5. NATURAL RUBBER impellers are used in cold water applications. Temperature range: 22°F to 120°F. 6. SANITARY EPDM impellers are used for elevated temperature hygienic applications to 185°F. EPDM is compatible with some ketone solvents. Temperature range: 60°F to 185°F.
Flexible Impeller Cross-Reference Impeller No. Silhouette
331-0001 836-0001 -0003 -0008 920-0001 -0003 -0008 964-0001 -0003 1133-0001 -0003 1210-0001 -0003 1414-0001 -0003 2999-0001 3085-0001 3398-0001 -0003 -0004
56
O O O O M M M M M G G K K A A U L G G G
Impeller No. Silhouette
4527-0001 -0003 4528-0001 -0003 4568-0001 -0003 4598-0001 -0003 5606-0001 -0003 -0004 5616-0001 5915-0001 5929-0001 -0003 6056-0003 6174-0001 -0003 6303-0001 -0003
G G D D K K M K G G G G N K K M K K H H
Impeller No. Silhouette
6760-0003 7273-0001 -0003 -0004 7614-0002 -0005 8500-0005 8600-0002 -0003 -0005 8713-0005 8840-0002 -0004 -0005 -0006 8963-0002 -0005 8980-0002 -0003
O G G G K K AA V V V U N N N N S S L L
Impeller No. Silhouette
-0004 -0005 8981-0002 -0005 8983-0002 -0003 -0004 -0005 8984-0005 9200-0001 -0003 -0021 -0023 11979-0001 12104-0001 12326-0001 -0003 14281-0001 -0003
Impeller No.
L L M M P P P P R F F F F M A M M K K
Silhouette
-0004 14282-0001 -0003 -0004 14346-0002 -0003 -0004 -0005 14609-0001 -0003 14750-0001 -0003 14787-0001 -0003 14792-0001 -0003 14868-0001 14874-0001 -0003
Impeller No.
K M M M Q Q Q Q C C B B C C A A M I I
Silhouette
-0004 17255-0003 17273-0004 17370-0001 17486-0001 17935-0001 17936-0001 17937-0001 17956-0001 18018-0001 18673-0001 -0003 18786-0001 -0003 18815-0001 18838-0001 18948-0001 21899-0005 22120-0001
I D I Q H Q Q Y Y O I I R R L W X U K
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 57
Jabsco Parts Reference Guide Jabsco Flexible Impeller Reference Guide
Impeller Number SILHOUETTE A 1414-0001 -0003 12104-0001 14792-0001 -0003 SILHOUETTE B 14750-0001 -0003 SILHOUETTE C 14609-0001 -0003 14787-0001 -0003 SILHOUETTE D 4528-0001 -0003 17255-0003 SILHOUETTE F 9200-0001 -0003 -0021 -0023 SILHOUETTE G 1133-0001 -0003 3398-0001 -0003 -0004 4527-0001 -0003 5606-0001 -0003 -0004 5616-0001 7273-0001 -0003 SILHOUETTE H 6303-0001 -0003 17486-0001 SILHOUETTE I 14874-0001 -0003 -0004 17273-0004 18673-0001 -0003 SILHOUETTE K 1210-0001 -0003 4568-0001 -0003 5929-0001 -0003 6174-0001 -0003
Impeller Material
Type of No. of Drive Blades
Dimensions A B
Shaft Dia.
Insert Material
Remarks
Neoprene Nitrile Neoprene Neoprene Nitrile
4 4 2 4 4
6 6 6 6 6
1-1/4 1-1/4 1-1/4 1-1/4 1-1/4
15/32 15/32 15/32 15/32 15/32
5/16 5/16 5/16 5/16 5/16
BR BR BR SS SS
Neoprene Nitrile
4 4
8 8
1-1/4 1-1/4
15/32 15/32
5/16 5/16
BR BR
Neoprene Nitrile Neoprene Nitrile
4 4 4 4
6 6 6 6
1-1/4 1-1/4 1-1/4 1-1/4
15/32 15/32 15/32 15/32
5/16 5/16 5/16 5/16
BR BR PL PL
Neoprene Nitrile Nitrile
1 or 2 1 or 2 —
6 6 6
1-9/16 3/4 1-9/16 3/4 1-9/16 3/4
3/8 3/8 1/4
BR BR
Was AL - 24 Was AL - 24 - 37 Impeller Molded on Shaft
Neoprene Nitrile Neoprene Nitrile
4 4 4 4
10 10 10 10
1-19/32 1-19/32 1-19/32 1-19/32
3/4 3/4 3/4 3/4
5/16 5/16 5/16 5/16
PL PL BR BR
Was Brass Insert Was Brass Insert
Neoprene Nitrile Neoprene Nitrile Viton Neoprene Nitrile Neoprene Nitrile Viton Neoprene Neoprene Nitrile
1 or 2 1 or 2 2 2 2 2 2 6 6 6 6 4 4
6 6 6 6 6 6 6 6 6 6 6 6 6
2 2 2 2 2 2 2 2 2 2 2 2 2
7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8
1/2 1/2 1/2 1/2 1/2 5/16 5/16 1/2 1/2 1/2 1/2 5/16 5/16
SS SS None None None None None SS SS SS BR PL PL
Neoprene Nitrile Neoprene
4 4 6
6 6 6
2 2 2
7/8 7/8 7/8
5/16 5/16 1/2
PL PL BR
Brass Extended Drive Cup
Neoprene Nitrile Viton Viton Neoprene Nitrile
5 5 5 4 1 or 2 1 or 2
10 10 10 10 10 10
2 2 2 2 2 2
7/8 7/8 7/8 7/8 7/8 7/8
5/8 5/8 1/2 5/16 1/2 1/2
PL PL PL PL PL PL
Replaces 673-0001 Replaces 673-0003
Neoprene Nitrile Neoprene Nitrile Neoprene Nitrile Nitrile Nitrile
7 7 3 3 6 6 6 6
12 12 12 12 12 12 12 12
2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4
1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4
5/8 5/8 5/8 5/8 1/2 1/2 5/8 5/8
BR BR BR BR BR BR SS SS
SS Drive Cup SS Drive Cup SS Drive Cup SS Drive Cup
Onan (Use 6-32 x 5/8 Hdl's Screw)
SS Extended Drive Cup SS Extended Drive Cup SS Extended Drive Cup Brass Extended Drive Cup
INSERT MATERIALS: BR = Bronze • SS = Stainless Steel • PL = Epoxy Plastic
57
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 58
Jabsco Parts Reference Guide Jabsco Flexible Impeller Reference Guide Impeller Number 7614-0002 -0005 14281-0001 -0003 -0004 22120-0001 SILHOUETTE L 3085-0001 8980-0001 -0002 -0003 -0004 -0005 18815-0001 SILHOUETTE M 920-0001 -0003 -0008 964-0001 -0003 4598-0001 -0003 6056-0003 8981-0002 -0005 11979-0001 12326-0001 -0003 14282-0001 -0003 -0004 SILHOUETTE N 5915-0001 8840-0002 -0003 -0004 -0005 SILHOUETTE O 331-0001 836-0001 -0003 -0008 6760-0003 18018-0001 SILHOUETTE P 8983-0003 -0004 -0005 SILHOUETTE Q 14346-0002 -0003 -0004 -0005 17370-0001 17935-0001 17936-0001
Impeller Material
Type of Drive
No. of Blades
Dimensions A B
Shaft Dia.
Insert Material
EPDM Neoprene Neoprene Nitrile Viton Neoprene
5 5 5 5 5 7
12 12 12 12 12 12
2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4
1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 2
5/8 5/8 5/8 5/8 5/8 5/8
PL PL PL PL PL BR
Neoprene Neoprene EPDM Nitrile Viton Neoprene Neoprene
7 5 5 5 5 5 6
10 10 10 10 10 10 10
2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4
1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4
5/8 5/8 5/8 5/8 5/8 5/8 1/2
BR PL PL PL PL PL BR
Neoprene Nitrile Natural Rubber Neoprene Nitrile Neoprene Nitrile Nitrile EPDM Neoprene Neoprene Neoprene Nitrile Neoprene Nitrile Viton
7 7 7 7 7 3 3 6 5 5 7 6 6 5 5 5
8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
2-9/16 2-9/16 2-9/16 2-9/16 2-9/16 2-9/16 2-9/16 2-9/16 2-9/16 2-9/16 2-9/16 2-9/16 2-9/16 2-9/16 2-9/16 2-9/16
2 2 2 2 2 2 2 2 2 2 1-7/16 2 2 2 2 2
5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8
BR BR BR PL PL BR BR BR PL PL BR SS SS PL PL PL
Neoprene EPDM Nitrile Viton Neoprene
7 5 5 5 5
8 8 8 8 8
2-9/16 2-9/16 2-9/16 2-9/16 2-9/16
2 2 2 2 2
5/8 5/8 5/8 5/8 5/8
BR PL PL PL PL
Sanitary
Neoprene Neoprene Nitrile Natural Rubber Nitrile Neoprene
7 7 7 7 7 7
9 9 9 9 9 9
3-3/4 3-3/4 3-3/4 3-3/4 3-3/4 3-3/4
2-1/2 2-1/2 2-1/2 2-1/2 3-1/2 3-1/2
1 1 1 1 1 1
PL BR BR BR BR SS
SS Inserted 331-0001
Nitrile Viton Neoprene
5 5 5
10 10 10
3-3/4 3-3/4 3-3/4
2-1/2 2-1/2 2-1/2
1 1 1
PL PL PL
Sanitary
EPDM Nitrile Viton Neoprene Neoprene Neoprene Neoprene
5 5 5 5 5 7 7
12 12 12 12 12 12 12
3-3/4 3-3/4 3-3/4 3-3/4 3-3/4 3-3/4 3-3/4
2-1/2 2-1/2 2-1/2 2-1/2 3-1/2 2-1/2 3-1/2`
1 1 1 1 1 1 1
PL PL PL PL PL BR BR
INSERT MATERIALS: BR = Bronze • SS = Stainless Steel • PL = Epoxy Plastic
58
Remarks Sanitary Sanitary
Sanitary
Sanitary SS Drive Cup
For Low Temp. to 27º F -Max. 120º F
SS Drive Cup Sanitary Sanitary SS Drive Cup SS Drive Cup
Sanitary
Sanitary
Sanitary
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 59
Jabsco Parts Reference Guide Jabsco Flexible Impeller Reference Guide Impeller Number SILHOUETTE R 8984-0005 18786-0001 -0003 -0004 SILHOUETTE S 8963-0002 -0005 SILHOUETTE U 2999-0001 21899-0005 8713-0005 SILHOUETTE V 8600-0003 -0005 SILHOUETTE W 18838-0001 SILHOUETTE X 18948-0001 SILHOUETTE Y 17937-0001 17956-0001 17981-0005 SILHOUETTE AA 8500-0005
Impeller Material
Type of Drive
No. of Blades
Dimensions A B
Shaft Dia.
Insert Material
Remarks
Neoprene Neoprene Nitrile Viton
5 5 5 5
9 9 9 9
4-5/8 4-5/8 4-5/8 4-5/8
3-1/2 3-1/2 3-1/2 3-1/2
1 1 1 1
PL PL PL PL
Sanitary
EPDM Neoprene
5 5
9 9
4-5/8 4-5/8
3-1/2 3-1/2
1 1
PL PL
Sanitary Sanitary
Neoprene Neoprene Neoprene
7 5 5
13 13 13
5 5 5
4 4 5-1/4
1-1/2 1-1/2 1-1/2
BR PL PL
Sanitary Sanitary
Nitrile Neoprene
5 5
12 12
4-5/8 4-5/8
3-1/2 3-1/2
1 1
PL PL
Sanitary
Neoprene
3
12
2-7/16
1-1/4
5/8
BR
Neoprene
3
12
2-9/16
1-5/8
5/8
BR
Neoprene Neoprene Neoprene
7 6 5
10 10 10
2-9/16 2-9/16 2-9/16
2 2 2
5/8 5/8 5/8
BR BR PL
SS Drive Cup, Replaces 6056-0001 Sanitary
Neoprene
5
12
5
4
1-1/2
PL
Sanitary
INSERT MATERIALS: BR = Bronze • SS = Stainless Steel • PL = Epoxy Plastic
59
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 60
Jabsco Parts Reference Guide JABSCO INDUSTRIAL SERVICE KITS Model Service Number Kit Impeller 11810-0003 11810-0011 11810-0013 11860-0005 11860-0045 11870-0005 11870-0045 12290-0001 12290-0003 12290-0004 12290-0271 12290-0274 12310-0001 12310-0003 12560-0001 16400-3270 16400-3350 16400-3400 16400-3470 16410-3270 16410-3350 16410-3400 16410-3470 16450-0115 16450-0220 16450-1115 16450-2115 16510-3270 16510-3350 16510-3400 16510-3470 16520-3270 16520-3350 16520-3400 16520-3470 17430-0003 17430-0004 17830-1012 18330-0000 18330-0040 18370-0000 18510-0000 18510-0001 18510-0010 18510-0020 18510-0021 18580-0000 18590-1000 18590-1090 18610-0001 18610-0003 18610-0004 18610-0271 18610-0273
60
90105-0003 90105-0001 90105-0003 90118-0003 90118-0003 90062-0003 90062-0003 90126-0002 90126-0013 90126-0004 90126-0002 90126-0004 90158-0011 90158-0033 90126-0001 --------------------------------------------------------------------------------------------90254-0003 90254-0003 90254-0001 ------------------------18598-1000 18598-1000 90061-0032 90061-0033 90061-0034 90061-0032 90061-0033
5929-0003 5929-0001 5929-0003 920-0003 920-0003 836-0003 836-0003 7273-0001 7273-0003 7273-0004 7273-0001 7273-0004 14792-0001 14792-0003 6303-0001 16508-1000 16508-1000 16508-1000 16508-1000 16508-1000 16508-1000 16508-1000 16508-1000 ----------------16508-1001 16508-1001 16508-1001 16508-1001 16508-1001 16508-1001 16508-1001 16508-1001 14281-0003 14806-0004 9200-0023 6760-0003 6760-0003 17936-0001 18515-0000 18515-0000 18526-0000 18562-0000 18562-0000 18515-0000 6303-0003 6303-0003 7273-0001 7273-0003 7273-0004 7273-0001 7273-0003
O-ring Gasket
Shaft Seal
Motor
Pumphead Assy
3298-0000 3298-0000 3298-0000 890-0000 890-0000 816-0000 816-0000 12554-0000 12554-0000 12554-0000 12554-0000 12554-0000 92000-0750 92000-0750 12558-0000 --------------------------------------------------------------------------------92000-0310 92000-0880 18753-0660 816-0000 816-0000 816-0000 18516-0000 18516-0000 18516-0000 18516-0000 18516-0000 18516-0000 18596-1000 18596-1000 18753-0660 18753-0660 18753-0660 18753-0660 18753-0660
92700-0420 92700-0420 92700-0420 96080-0080 96080-0080 6407-0010 6407-0010 1040-0000 1040-0000 1040-0000 1040-0000 1040-0000 1040-0000 1040-0000 1040-0000 --------------------------------------------------------------------------------96080-0280 96080-0290 18753-0384 6408-0000 6408-0000 6408-0000 1040-0001 1040-0001 96080-0552 96080-0552 96080-0552 1040-0001 1040-0000 1040-0000 18753-0384 18753-0384 18753-0385 18753-0384 18753-0384
18739-0000 18753-0014 18753-0014 ----------------18740-0000 18740-0000 18740-0000 18742-0000 18742-0000 9195-0004 9195-0004 98012-0020 --------------------------------18753-0680 18753-0681 18753-0680 18753-0680 --------------------------------93004-1850 93004-1850 18753-0067 ------------18517-0000 18517-0001 18573-0461 18517-0000 18517-0001 18753-0082 17426-0000 18753-0638 18740-0000 18740-0000 18740-0000 18742-0000 18742-0000
11818-0003 ------------------------12590-0011 12590-0003 12590-0021 12590-0011 12590-0021 12377-0001 ----12590-0001 ----------------------------------------------------------------------------------------------------------------------------------------9190-1001 9190-1001 9190-1003 9190-1003 9190-1004
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 61
Jabsco Parts Reference Guide JABSCO INDUSTRIAL SERVICE KITS Model Service Number Kit Impeller 18610-0274 18660-0121 18660-0123 18670-0123 18670-0923 18690-0000 23920-9213 23920-9403 30140-0003 30180-0003 30510-0001 30510-0003 30510-0004 30510-0011 30510-0013 30510-0014 30510-0101 30510-0103 30510-0104 30510-0111 30510-0113 30510-0114 30510-1001 30510-1003 30510-1004 30510-1011 30510-1013 30510-1014 30510-1101 30510-1103 30510-1104 30510-1111 30510-1113 30510-1114 30510-2001 30510-2003 30510-2004 30510-2101 30510-2103 30510-2104 30510-3001 30510-3003 30510-3004 30510-3101 30510-3103 30510-3104 30510-4001 30510-4003 30510-4004 30510-4101 30510-4103 30510-4104 30510-5001 30510-5003
90061-0034 90061-0006 90061-0006 90061-0031 90061-0031 18598-1000
7273-0004 6303-0001 6303-0003 6303-0003 6303-0003 6303-0003
----36056-0003 ----36056-0003 refer to data sheet 43000-0512 refer to data sheet 43000-0512 refer to data sheet 43000-0512 refer to data sheet 43000-0512 refer to data sheet 43000-0512 refer to data sheet 43000-0512 refer to data sheet 43000-0512 refer to data sheet 43000-0512 refer to data sheet 43000-0512 refer to data sheet 43000-0512 refer to data sheet 43000-0512 refer to data sheet 43000-0512 refer to data sheet 43000-0516 refer to data sheet 43000-0516 refer to data sheet 43000-0516 refer to data sheet 43000-0516 refer to data sheet 43000-0516 refer to data sheet 43000-0516 refer to data sheet 43000-0516 refer to data sheet 43000-0516 refer to data sheet 43000-0516 refer to data sheet 43000-0516 refer to data sheet 43000-0516 refer to data sheet 43000-0516 refer to data sheet 43000-0518 refer to data sheet 43000-0518 refer to data sheet 43000-0518 refer to data sheet 43000-0518 refer to data sheet 43000-0518 refer to data sheet 43000-0518 refer to data sheet 43000-0522 refer to data sheet 43000-0522 refer to data sheet 43000-0522 refer to data sheet 43000-0522 refer to data sheet 43000-0522 refer to data sheet 43000-0522 refer to data sheet 43000-0518 refer to data sheet 43000-0518 refer to data sheet 43000-0518 refer to data sheet 43000-0518 refer to data sheet 43000-0518 refer to data sheet 43000-0518 refer to data sheet 43000-0522 refer to data sheet 43000-0522
O-ring Gasket
Shaft Seal
Motor
Pumphead Assy
18753-0660 18753-0660 18753-0660 18573-0660 18573-0660 18596-1000
18753-0385 18753-0384 18753-0384 18753-0384 18753-0384 1040-0000
18742-0000 98012-0020 98012-0020 18753-0050 18753-0659 18744-0000
9190-1004 ---------------------
92000-1413 92000-1413 ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
92700-1041 92700-1041 ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
18736-0000 18736-0000 ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
61
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 62
Jabsco Parts Reference Guide JABSCO INDUSTRIAL SERVICE KITS Model Service Number Kit Impeller 30510-5004 30510-5101 30510-5103 30510-5104 30520-0001 30520-0003 30520-0004 30520-0011 30520-0013 30520-0014 30520-0101 30520-0103 30520-0104 30520-0111 30520-0113 30520-0114 30520-1001 30520-1003 30520-1004 30520-1011 30520-1013 30520-1014 30520-1101 30520-1103 30520-1104 30520-1111 30520-1113 30520-1114 30520-2001 30520-2003 30520-2004 30520-2101 30520-2103 30520-2104 30520-3001 30520-3003 30520-3004 30520-3101 30520-3103 30520-3104 30520-4001 30520-4003 30520-4004 30520-4101 30520-4103 30520-4104 30520-5001 30520-5003 30520-5004 30520-5101 30520-5103 30520-5104 30530-0001
62
refer to data sheet 43000-0522 refer to data sheet 43000-0522 refer to data sheet 43000-0522 refer to data sheet 43000-0522 refer to data sheet 43000-0513 refer to data sheet 43000-0513 refer to data sheet 43000-0513 refer to data sheet 43000-0513 refer to data sheet 43000-0513 refer to data sheet 43000-0513 refer to data sheet 43000-0513 refer to data sheet 43000-0513 refer to data sheet 43000-0513 refer to data sheet 43000-0513 refer to data sheet 43000-0513 refer to data sheet 43000-0513 refer to data sheet 43000-0517 refer to data sheet 43000-0517 refer to data sheet 43000-0517 refer to data sheet 43000-0517 refer to data sheet 43000-0517 refer to data sheet 43000-0517 refer to data sheet 43000-0517 refer to data sheet 43000-0517 refer to data sheet 43000-0517 refer to data sheet 43000-0517 refer to data sheet 43000-0517 refer to data sheet 43000-0517 refer to data sheet 43000-0519 refer to data sheet 43000-0519 refer to data sheet 43000-0519 refer to data sheet 43000-0519 refer to data sheet 43000-0519 refer to data sheet 43000-0519 refer to data sheet 43000-0523 refer to data sheet 43000-0523 refer to data sheet 43000-0523 refer to data sheet 43000-0523 refer to data sheet 43000-0523 refer to data sheet 43000-0523 refer to data sheet 43000-0519 refer to data sheet 43000-0519 refer to data sheet 43000-0519 refer to data sheet 43000-0519 refer to data sheet 43000-0519 refer to data sheet 43000-0519 refer to data sheet 43000-0523 refer to data sheet 43000-0523 refer to data sheet 43000-0523 refer to data sheet 43000-0523 refer to data sheet 43000-0523 refer to data sheet 43000-0523 refer to data sheet 43000-0514
O-ring Gasket
Shaft Seal
Motor
Pumphead Assy
-------------------------------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------
-----------------------------------------------------
-----------------------------------------------------
-----------------------------------------------------
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 63
Jabsco Parts Reference Guide JABSCO INDUSTRIAL SERVICE KITS Model Service Number Kit Impeller 30530-0001 30530-0003 30530-0004 30530-0011 30530-0013 30530-0014 30530-0101 30530-0103 30530-0104 30530-0111 30530-0113 30530-0114 30530-2001 30530-2003 30530-2004 30530-2101 30530-2103 30530-2104 30530-4001 30530-4003 30530-4004 30530-4101 30530-4103 30530-4104 30540-0001 30540-0003 30540-0004 30540-0011 30540-0013 30540-0014 30540-0101 30540-0103 30540-0104 30540-0111 30540-0113 30540-0114 6400-0004 6400-0051
refer to data sheet 43000-0514 refer to data sheet 43000-0514 refer to data sheet 43000-0514 refer to data sheet 43000-0514 refer to data sheet 43000-0514 refer to data sheet 43000-0514 refer to data sheet 43000-0514 refer to data sheet 43000-0514 refer to data sheet 43000-0514 refer to data sheet 43000-0514 refer to data sheet 43000-0514 refer to data sheet 43000-0514 refer to data sheet 43000-0520 refer to data sheet 43000-0520 refer to data sheet 43000-0520 refer to data sheet 43000-0520 refer to data sheet 43000-0520 refer to data sheet 43000-0520 refer to data sheet 43000-0520 refer to data sheet 43000-0520 refer to data sheet 43000-0520 refer to data sheet 43000-0520 refer to data sheet 43000-0520 refer to data sheet 43000-0520 refer to data sheet 43000-0515 refer to data sheet 43000-0515 refer to data sheet 43000-0515 refer to data sheet 43000-0515 refer to data sheet 43000-0515 refer to data sheet 43000-0515 refer to data sheet 43000-0515 refer to data sheet 43000-0515 refer to data sheet 43000-0515 refer to data sheet 43000-0515 refer to data sheet 43000-0515 refer to data sheet 43000-0515 ----17935-0001 ----17935-0001
O-ring Gasket ------------------------------------------------------------------------------------------------------------------------------------------------92000-0120 92000-0120
Shaft Seal
Motor
------------------------------------------------------------------------------------------------------------------------------------------------6407-0010 6407-0010
---------------------------------------------------------------------------------------------------------------------------------------------------------
Pumphead Assy ---------------------------------------------------------------------------------------------------------------------------------------------------------
63
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 64
Trouble Shooting Guide Impeller Replacement Trouble Shooting 1 Symptoms
■ End faces hard and either polished or cracked, like carbon. ■ Some or all blades completely missing.
Cause
■ Dry running, lack of liquid in pump. ■ Temporary suction blockage. ■ Leaking suction plumbing.
Remedy
■ Do not run pump for more than 20 seconds without liquid. ■ Install a liquid sensor/temperature alarm. ■ Check suction plumbing, strainers, and fittings for blockages and leakage. ■ Arrange discharge plumbing to trap liquid in the pump.
Trouble Shooting 2 Symptoms
■ Pieces missing from the middle of blade tips. ■ Blade edges are hollowed out. ■ Pitting is evident on cam and the inside of pump ports, and on ends of impeller.
Cause
■ Cavitation, i.e. too much vacuum on inlet is causing water to boil inside pump.
Remedy
■ Reduce pump speed. ■ Increase inlet plumbing diameter. ■ Reduce inlet plumbing length and remove unnecessary restrictions. ■ Reduce cam thickness.
Trouble Shooting 3 Symptoms
■ Worn blade tips, cam imprint on edges. ■ Worn end faces. ■ Worn impeller drive and shaft wear.
Cause
■ Abrasive wear from fluid in pump. ■ Heat exchanger/cooler blockage. ■ High discharge pressure.
Remedy
■ Check discharge plumbing for partial blockages. ■ Increase discharge pipe diameter.
64
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 65
Trouble Shooting Guide Impeller Replacement Trouble Shooting 4 Symptoms
■ Impeller appears to have swollen. ■ Blades appear wider than impeller hub. ■ Rubber may feel sticky.
Cause
■ Chemical attack, more common with oily bilge water or diesel transfer.
Remedy
■ Ensure impeller is rinsed after use. ■ Remove impeller when not in use. ■ Remove impeller for long term storage.
Trouble Shooting 5 Symptoms
■ Blades have some or severe permanent set.
Cause
■ Normal use of impeller. ■ Long term storage in pump. ■ Normal end of impeller life.
Remedy
■ Refit impeller to rotate in opposite direction. ■ Remove impeller for long term storage. ■ Replace impeller.
Trouble Shooting 6 Symptoms
■ Blades cracked about half way up the length. ■ Some of blades missing. ■ Reduced flow.
Cause
■ Normal end of impeller life. ■ High discharge pressure.
Remedy
■ Replace impeller, check for impeller pieces in discharge plumbing. ■ Reduce outlet restrictions or increase outlet plumbing diameter.
65
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:38 PM
Page 66
NOTES
43001-0075 Jabsco Ind Cat 2002
4/3/02
3:37 PM
Page cov4
Jabsco offers a comprehensive and unrivaled range
of specialized
positive-displacement and centrifugal pumps to a diverse sector of industry worldwide including:
Agriculture Floor Care Car Wash Automotive Construction Equipment Chemical Transfer General Industrial Medical
USA Jabsco - Flojet 20 Icon Foothill Ranch CA 92610
UK Jabsco - Flojet Bingley Road Hoddesdon Hertfordshire, EN11 OBU
Germany Jabsco GmbH Oststraße 28 22844 Norderstedt
Japan NHK Jabsco Co Ltd 3-20-10, Shin-Yokohama Kohoku-ku Yokohama 222
Tel: +1 949 859 4945 Fax: +1 949 859 1153
Tel: +44 1992 450 145 Fax: +44 1992 467 132
Tel: +49 40 53 53 73 0 Fax: +49 40 53 53 73 11
Tel: +81 45 475 8906 Fax: +81 45 475 8908
Warranty: All products and services of Jabsco ITT Industries are sold and or offered subject to the company’s warranty terms and conditions of sale. Copies of which will be furnished upon request.
P/N 43001-0075 2/02
