Instruction 1 2-sided page Front Back

Quick Mount LCD Monitor / TV Kit. Wall Plate. 1. Use the2 / " wood screws,. 4 mount the wall plate to wall stud or use enclosed sheet rock mollies. 1. Use the / " bolts, mount. 2 the monitor plate to back of monitor,. (Note corners holes to accommodate both 75mm or 100mm VESA systems). 1. Use the / " bolts to lock and ...
678KB taille 4 téléchargements 420 vues
Instruction 1 2-sided page AS Easy as 1,2,3! Step 1a

Quick Mount LCD Monitor / TV Kit

Step 1b Wall Plate

LCD TV / Montior Plate 100mm 75mm 50mm

Using the21/ 4" wood screws, mount the wall plate to wall stud

Pre-drill these mounting holes with a 8mm masonry bit to an least 50mm in depth. Using the21/ 4" wood screws and concrete anchor mount the wall plate to wall

50mm 75mm 100mm

Use the21/ 4" wood screws, mount the wall plate to wall stud or use enclosed sheet rock mollies

Step 3 Step 2

Use the1/ 2" bolts, mount the monitor plate to back of monitor, (Note corners holes to accommodate both 75mm or 100mm VESA systems)

Use the1/ 4" bolts to lock and secure your monitor in place Note: Bracket is intended for use on LCD monitors up to 66lbs R

VESA is a registered Trademark of the Video Electronics Standards Association

Front

Using the 1/ 2" bolts,mount the monitor plate to back monitor, Depending on your monitor, Use the 75mm or 100mm pre-drilled holes

Simply silp your monitor onto your wall mount, and secure with 1/ 4" locking bolts from below, and you are finished! Enjoy! R

VESA is a registered Trademark of the Video Electronics Standards Association

Back