qsg-btgo-01 french - Blendtec

H) The use of attachments, including canning jars, not recommended by the manufacturer may cause a risk of injury to persons. I). Do not blend hot liquids.
Télécharger le PDF
3MB taille 0 téléchargements 340 vues
commentaire
Report
BLENDTEC GO

™

Model 41-503

Household Use Only For Use With Blendtec Blenders

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed including the following: A) B) C) D)

I)

Read all instructions. Close supervision is necessary when any appliance is used by or near children. Avoid contacting moving parts. Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage to the blender. Blades are sharp. Handle carefully. To reduce the risk of injury, never place cutter-assembly blades on base without jar properly attached. Always operate blender with cover in place. The use of attachments, including canning jars, not recommended by the manufacturer may cause a risk of injury to persons. Do not blend hot liquids.

J)

SAVE THESE INSTRUCTIONS.

E) F) G) H)

IMPORTANTES CONSIGNES DE SÉCURITÉ

Lors de l’utilisation d’appareils électriques, des précautions devraient respecter notamment ce qui suit: A) B) C) D)

I)

Lire toutes les instructions. Une surveillance très proche est nécessaire quand l’appareil est utilisé par ou près des enfants. Eviter tout contact avec les pièces mobiles. Tenez les mains et les ustensiles hors du récipient pendant le mélangeur est en cours pour réduire le risque de blessures graves ou endommager le mixer. Les lames sont tranchantes. Utilisez-les avec précautions. Pour réduire le risque de blessure, ne placez jamais la lame de mélangeur sur base sans le bocal correctement attaché. Utilisez toujours le mélangeur avec le couvercle en place. L’utilisation d’accessoires, y compris les conserves bocaux, non recommandés par le fabricant peuvent provoquer un risque de blessures aux personnes. Ne pas mélanger les liquides chauds.

J)

CONSERVER CES INSTRUCTIONS.

E) F) G) H)

*Suggested cups for use with Blendtec Go™

Solo® Ultra Clear™ Cups Item

Description

TP16D TP20 TD24

16 oz. Practical-fill PET Cup 20 oz. PET Cup 24 oz. PET Cup

For warranty information go to www.blendtec.com

QSG-BTGO-01 Rev. 01

BLENDTEC GO

™

BLEND, SET, GO!

1. SELECT CUP • Choose either the Blendtec Go travel bottle or drop a disposable cup* into the travel bottle.

OR

2. ADD INGREDIENTS • Begin with heavy, dense ingredients like ice, frozen fruit or grapes. Then add soft foods like leafy greens or fresh berries. Top with anything that’s sticky like honey or peanut butter and follow with liquid.

• Tip: if using protein powder, add liquid first, powder second and then follow with remaining ingredients as indicated above. 3. ATTACH MICRONIZER • Twist micronizer onto travel bottle until tight. 4. PLACE ON MOTOR BASE • Flip and set assembled travel bottle with micronizer onto the motor base.

• Select preprogrammed cycle or blend on medium to high speed until desired texture is achieved. 5. LIFT MICRONIZER ASSEMBLY OFF MOTOR BASE • Flip travel bottle right-side up and twist to remove micronizer assembly.

OR

6. ADD LID AND ENJOY • Add a lid to the disposable cup or the travel bottle and enjoy your beverage on the Go with Blendtec Go. 7. CLEAN • To clean the Blendtec Go, wash pieces separately in the dishwasher (top rack only, do not use heat cycle) or by hand. For a more thorough cleaning, remove the red silicone gasket from the micronizer assembly and wash separately. Allow gasket and micronizer to dry thoroughly before reassembly.

For more Blendtec Go tips and recipes go to www.blendtec.com/use-and-care/go