Live Screen Displays. The Live screen displays in 2 views - Quad View or Full View. Quad View displays the images in 4 quadrants (only display camera that is ON). Tap a quadrant to display single camera view / full view. Tap on that image again to return to Quad View. Manual Recording. 1. On the Live screen, tap for the.
GETTING TO KNOW THE MONITOR AND CAMERA Receiver (back/side)
Camera
KIT CONTENT :
Antenna SD Card Slot
Wireless Camera w/ stand
Wireless Touch Screen LCD Monitor w/ Cradle
x2 Internet Cable
Power Adapter
Camera Antenna
Stand
x1
x2
x3
Quick Start Guide
Screw Pack
x1
PIR
x1
CAMERA INSTALLATION
x1
FACTORY DEFAULT SETTING Press and hold the reset button on the power cable for 5 seconds and the system will start the reset process. The system will restore to factory default. FCC Compliance Statement: This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions: (1)this device may not cause harmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation. Products with CE Marking comply with EMC Directive (2004/108/EC); Low Voltage Directive (73/23/EEC); R&TTE (1999/5/EC); ROHS Directive (2011/65/EU) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms: EMC: EN 301 489 LVD: EN 60950 Radio: EN 300 328
If the camera system no longer functions or can no longer be repaired, it must be disposed of according to the valid statutory regulations. Disposal of spent batteries/accumulators: You are required by law (Battery Ordinance) to return all spent batteries and accumulators. Disposing of spent batteries/accumulators with common household waste is prohibited! Batteries/accumulators that contain hazardous substances are marked with the symbols on the side. These symbols indicate that it is prohibited to dispose of these batteries/accumulators in the household waste. The abbreviations for the respective heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead. You can return spent batteries and accumulators that can no longer be charged to the designated collection points in your community, outlets or wherever batteries or accumulators are sold. Following these instructions will allow you to fulfill the legal requirements and contribute to the protection of our environment!
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. L'antenne (s) utilisé pour cet émetteur doit être installé pour fournir une distance de séparation d'au moins 20 cm de toute personne et ne doit pas être colocalisées ou opérant dans conjointement avec une autre antenne ou émetteur.
1 Secure the camera stand on a stable surface
2 Loosen up the thumb screw 3 Adjust proper view angle, then secure the joint with T-bolt.
Pairing the Camera to Receiver (optional) The system supports up to 4 wireless cameras. If you are adding another camera to the system, please ensure its channel is set to a different channel to the existing camera(s). 1. Go to the Main Menu>Camera Setup (specify channel 1/2/3/4)>Press the Camera Pairing button 2. Press the pairing key ONCE on the camera
Setting the Camera Channel (optional)
The wireless camera is preset to channel 1 by default. You can also use the steps above to change the camera channel if necessary.
OPERATION SCREEN
Zoom Feature To zoom into a particular area, 1. Go to full view, then tap
to activate zoom mode.
2. Select the zone by tapping the zone area to view zoom in screen.
Main Screen Camera Mode
Battery Capacity
Connecting to the Internet
Scheduled
Volume
Camera Number
Internet Connected
Pop Up Menu Tab
System Settings
Connecting to the Record Status
Remote View
No SD Card Indicator
SD Capacity
Record Status
Motion
Zoom
From the pop-up menu, tap the following icons
Manual Recording Live Screen Displays The Live screen displays in 2 views - Quad View or Full View. Quad View displays the images in 4 quadrants (only display camera that is ON). Tap a quadrant to display single camera view / full view. Tap on that image again to return to Quad View.
1. On the Live screen, tap camera to begin recording.
for the
2. Tap it again to stop recording.
Playback the Recorded Video From the pop-up menu, tap the following icons
de encendido y puesta en libertad. IT. Per accendere il Pillâ¢, premere e rilasciare il pulsante di alimentazione. DE Um Ihre Pill⢠einzuschalten, drücken und loslassen Netzschalter. NL Om uw Pill⢠aan te zetten, drukt u op en laat uit-knop. EN
Built-in microphone. Power indicator. Charge indicator. Disc drive indicator. NFC embedded touch pad. Press the bottom left of the touch pad to click. C (Bottom).
E Appuyer sur le bouton +/- du canal 4 pour valider la sélection et commencer la séance de stimulation. N.B. : Après la sélection d'un programme il se peut ...
Open the battery cover on the back of the Backtrack (slide it down as shown by the arrow, then lift it straight up), insert two aaa batteries (alkaline or lithium), and replace the cover. change batteries when low power is shown by the battery indica
Aug 23, 2007 - Type âadminâ in the User Name field. Leave the password field blank, and press Enter. The XAdmin welcome page appears. XAdmin Main ...
Connect to the Internet to automatically activate Windows. Wired connection. Connect your computer and router with a. LAN cable. Wi-Fi® (Wireless LAN) connection. 1 Open the charms by pointing to the top right corner of the screen, then move the poi
Proceeding to next step, next selection, etc. Example: Setting the phone language. ⢠Nächster Schritt, nächste Auswahl etc. Beispiel: Ãndern der Telefonsprache.
This device complies with Part 15 of the FCC Rules and with ICES-003, Issue 4 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and. (2) This device must accept any interfere
Câble de recharge. Cable de recarga ... AC adapter not included. FR Une charge ... Class B digital device, pursuant to part 15 of the FCC Rules. These limits are.
6 avr. 2016 - void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two ...
been designed to connect specifically to iPod,. iPhone, or iPad, respectively, and has been certifi ed by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and r
Enter the Wireless Key for the network you selected and then click .... Connect the equipment into an outlet on a circuit different from that to which the receiver is.
16 juil. 2016 - Launch the app and register an EZVIZ account. - Add DVR to your account by scanning the QR code of the device appears on the display after ...
GE Caddx (Nx4/6/8v2) - A 1.1k Resistor from the open zone to common on the alarm panel. A 3.3k Resistor from terminals 4 and 5 on the CAT unit. ⢠DSC PowerSeries - A 5.6k Resistor from terminals 4 and 5 on the CAT unit. ⢠Honeywell - A 2k Resisto
www.veho-world.com/main/support.aspx. Technical Support ... déplacer le curseur à gauche et à droite, puis appuyez sur. [OK/Obturateur] pour confirmer ... Règle le format NTSC ou PAL, en fonction de votre région. (Format de sortie TV).
(1) This device may not cause harmful interference, and ... interference to radio or television reception, which can be determined by .... El objetivo de los productos es proporcionar una advertencia adecuada en casos de usurpación ilegal en alguna á
23 mai 2014 - Assurez-vous de laisser un espace de 20 cm (7,8 pouces) ou plus autour de l'appareil. ... sur l'environnement et la santé humaine. ..... INCLUANT LA GARANTIE DE QUALITÉ MARCHANDE ET D'ADAPTATION À UNE FIN ...
Build FOP (you can skip this step if you download the binary distribution!) 3. ... reads the generated XSL-FO document and formats it to a PDF document.