ROD Aluminum Electrolytic Capacitors For Audio ROD
White-printing on a red translucent sleeve. (labeled âSTARGETâ). ⢠All lead wires are oxygen free copper wires to reduce distortion. Ïd ± 0.05 copper wire (tinned).
ROD Aluminum Electrolytic Capacitors For Audio Miniature Standard Capacitors for Audio Series ROD (ARD) STARGET • • •
High quality sound with a very high response materialized by a formation method newly developed for audio applications. White-printing on a red translucent sleeve. (labeled “STARGET”) All lead wires are oxygen free copper wires to reduce distortion.
Outline Drawing
Photo φd ± 0.05 copper wire (tinned)
Sleeve
F ± 0.5
φD + 0.5 max.
Vent(except φ5)
L + α max.
Radial Type
φD F φd
6.3 2.5
5 2.0
8 3.5 0.6
α
5 min.
15 min.
1.5
10
12.5 5.0
16
18 7.5
0.8 1.5 for L16 max. 2.0 for L20 min. Unit: mm
Specifications
ROD
No.
Item
Performance
1
Temperature range (°C)
2
Leakage current (µA)
3
Capacitance tolerance (%)
4
Tangent of loss angle (tan δ)
–40 to +85 Less than 0.01 CV or 4 whichever is larger (after 5 minutes), C: Capacitance (µF), V : Rated Voltage (V) ±20
(20°C, 120 Hz)
Rated voltage (V)
6.3
10
16
25
35
50
63
100
tan δ
0.24
0.20
0.16
0.14
0.12
0.10
0.09
0.08
0.02 is added to every 1000µF increase over 1000 µ F
5
Test time Leakage current
Endurance (85°C)
Change in capacitance
(Applied ripple current)
Tan δ 6
Max. storage temp. (85°C)
7
Applicable Standards
(20°C)
(20°C, 120Hz)
1000 hours The initial specified value or less WV(V) øD ≤ ø6.3 > ø6.3 6.3~16 ±20% ±20% 25~100 ±20% ±20% 150% or less of initial specified value
Test time: 500 hrs. Others have same as endurance. Voltage application treatment. JIS C 5101-1, 5101-4 1998 (IEC 60384-1 1992, 60384-4 1985)
Coefficients for the Allowable Ripple Current Frequency (Hz) 50 • 60 Rated Voltage (V) 6.3 to 16 25 to 35 50 to 100
120
1k
10 k
100 k
1 1 1 1 1
1.1 1.5 1.2 1.6 1.2
1.2 1.7 1.3 1.9 1.3
1.2 1.7 1.3 1.9 1.3
CV (µ F x WV) All CV value ≤1000 1000 < ≤1000 1000
Chip Type, High Temperature Range, .... the capacitors under no load at 150°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4.
10 Motor - Starting Capacitors Type MEK. Features. ⢠insulated aluminium can. ⢠with cap and conneting cable or plug - in tags. Applications. ⢠starting capacitors ...
Aluminium - Electrolytic - Capacitors. 68. 12.4 Standard Values Type SI / SI4P ( General Purpose ). UR. CR. Case size ESR100 Hz. ESR 100Hz tan δ 100Hz.
I am flying, passing high clouds. Dm. C G7. To be near you, to be free. G. C. Am. Can you hear me? Can you hear me? F. C. Through the dark night, far away. D.
spars are constructed of fiberglass or carbon rovings you must take a serious look at this ... Another benefit of a female mold is that the outside dimensions are always .... We have found that one man can fabricate a spar in less than 4 hours.
1) the production of a preclinical Good. Laboratory Practices (GLP*) batch which will be performed in a Good Manufacturing Practices. (GMP**) compliant facility ...
Jun 5, 2007 - ... Scandi Edge. The metal of the knife blade should extend for the full-length of the handle (a full tang) for strength. ... to the grain, and the handle bears your weight as you stand on it. (p109-111). .... Birch Carver. 184.3g total
Items 1 - 7 - capacitor designed specifically for Audio applications. ... Capacitors shall withstand the rated r.m.s. ripple current as given ... Charge/discharge.
