(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment.
The device under test is manufactured by the grantee (Schrader Electronics) and sold as an OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must ensure the end-user has all applicable / appropriate operating instructions. When end-user instructions are required, as in the case of this product, the grantee must notify the OEM to notify the enduser. Schrader Electronics will supply this document to the reseller/distributor dictating what must be included in the end user’s manual for the commercial product. INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL The following information (in blue) must be included in the end product user’s manual to ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must be included in the manual if the device label is not readily accessible to the end user. The compliance paragraphs below must be included in the user's manual. ****************************************************************************** FCC ID:MRXAG2SZ4 IC: 2546A- AG2SZ4 This device complies with Part 15 of the FCC Rules and with Licence exempt RSS standards of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met. ******************************************************************************
The following information (in blue) must be included in the end product user's manual to ensure continued FCC and Industry Canada regulatory compliance.
ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must be included in the manual if the device label is not readily accessible ...
compliance could void the user's authority to operate the equipment. The term âIC:â before the radio certification number only signifies that Industry Canada ...
the end-user has all applicable / appropriate operating instructions. ... required, as in the case of this product, the grantee must notify the OEM to notify the end-.
ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must be included in the manual if the device label is not readily accessible ...
Say: Dance with Me*. Meccanoid will: e úúï w you to play one of the recordings, in your L.I.M. library. Meccanoid will: â¬Â¢Â£Â¤Â¥Â¦Â§Â£Â¨Â¦Â£ play one of his included games. Choose from Robo Trivia, 5 Clues, ... and show you a dance routine. Mec
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will n
The power door locks will cycle when you have successfully entered ... If programming has failed, repeat this procedure from the beginning. ... Changes or modifications not expressly approved by Dorman Products Inc. could void the user's ...
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
instructions. When end-user instructions are required, as in the case of this product, the grantee must notify the OEM to notify the end-user. Robert Bosch Corporation will supply this document to the reseller/distributor dictating what must be inclu
batterie CR2450. COMPATIBILITÃ DU CAPTEUR DE PORTE. Visiter www.LiftMaster.com/door-sensor ou www.chamberlain.com/door-sensor pour prendre connaissance des produits compatibles avec ce capteur de porte. DÃTECTEUR SUR PORTE. MODÃLES MYQ-G0302, 821L
Two AA-size Alkaline batteries. ⢠Over two years battery's lifetime. SIZE and WEIGHT: ⢠H: 46.7 mm, Diameter: 135 mm. Weight â 210 grams including batteries. ENVIRONMENT: ⢠Storage range: -20oC â +50oC. ⢠Operating Ambient Temperature ran
For pet rejection, the optimal height is 2.1 m (7 ft). Surface or corner ... 7. Slide the detector upward until a click is heard. Note: It is recommended to wait about 1 minute after battery removal, before inserting the new battery. Caution! ... Ins
22 juil. 2013 - NOTICE: Changes or modications made to this device not expressly approved by. Philips Lighting Company (USA) and Philips Electronics Ltd ...
(1) this device may not cause harmful interference, and. (2) this device must accept any .... The supply terminals are not to be short-circuited. 7. .... Slide to Open.
Declaration of conformity with regard to the EU Directive 1999/5/EC. Kronoz LLC hereby declares that this device is in compliance with the essential ...
FCC Class A digital device notice. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part. 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inte
App, Google Play, or. Windows App Stores. My icon looks like this! He's no ordinary duck f /the.edwin.duck y @EdwinTheDuck. Edwin. Edwin's head lights up briefly when placed on charger correctly. Green flash indicates ... Note: This product has been
Power To turror:PressPowerButton once 1.Enable Bluetooth Palring ... Power i To turm off: Hold Power Button for J5s Series Beep Confirmation, LED citemates red and blue. Pà²à³à² (Audio Powar Dawn ... "Forful manual please visit astrogaming.com/man