Double duty: use as a floor monitor or stand mounted (excludes SE725). Integrated handle. High sound pressure level. Built-in handle and 35 mm stand adaptor.
Double duty: use as a floor monitor or stand mounted (excludes SE725) Integrated handle High sound pressure level Built-in handle and 35 mm stand adaptor 1/4" phone jack inputs
FEATURES Power handling (program): 160W / 300W / 400W / 600W (SEM710/SEM712/SEM715/SEM725) Frequency responses: 50 Hz - 20 kHz or 60 Hz - 20 kHz High sound pressure level, between 98 and 122 dB SPL @ 1W / 1M 10" / 12" / 15" heavy-duty woofer and piezo tweeter SE725 features two 15" woofers and piezo tweeter Built-in handle 1/4" phone jack inputs 8 Ohm nominal load (excluding active models & SE725) Double duty: use as a floor monitor or mounted as a raised sound reinforcement speaker (excluding SE725) 35 mm stand adapter built-in (excluding SE725) Built-in Power Amplifier (RMS): 180 Watts (SEM712A and SEM715A) XLR link-out connector (SEM712A and SEM715A only)
The style and innovation of the SEM and SE speakers is obvious at first glace. Availably in passive and active models - and with a variety of woofer sizes and power handling abilities - the SEM and SE speakers give users what they really need. The SEM speakers themselves double as floor monitors when required, and include built-in handles for easy mobility. All models feature at least one woofer between 10" to 15" in size (the SE725 generously provides two 15" woofers, making them in class of their own), and a piezo tweeter.
Take time to read through this manual before embarking on your journey through the ..... add at least one additional calibration star to improve the mount's all-sky ...
Installation Instructions. Shut Off Water Supplies. 1. Position faucet and/or gasket on lavatory. Use silicone sealant between faucet and lavatory to prevent water ...
smooth transition from red to orange and notes that âborderline cases are cases for which looking red ... is shifted depending on the order of presentation. In her.
WARNING Read all safety warnings and in- structions. ... This will ensure that the safety of the heated ..... site internet www.milwaukeetool.com ou contactez.
medical devices, consult the devise manufacturer and/or your physician to .... Return of the Heated Jacket to a MILWAUKEE factory Service Center location, freight prepaid and ..... Miguel Hidalgo, Distrito Federal, México. 01 (800) 030-7777 o ...
High and the red LED will light. Temperature setting can be ..... 11/17. Printed in China. MILWAUKEE TOOL. 13135 West Lisbon Road. Brookfield, WI 53005 USA.
medical devices, consult the devise manufacturer and/or your physician .... Heated Jacket to a MILWAUKEE factory Service Center location, freight prepaid and ...
dangerous and must be repaired. • Disconnect the battery pack from the heated hoodie before storing. Such preventive safety mea- sures reduce the risk of ...
repair person using only identical replacement parts. ... a helpless person, or anyone insensitive to heat, ... If the heated jacket turns off unexpectedly, check.
dark areas invite accidents. ELECTRICAL SAFETY .... and through another grommet into a side pocket. It is not recommend to use the pocket ... side of the jacket. Use the jacket and pocket power buttons to control the two zones. To turn on, press and
wash, Gentle Cycle in warm water. Tumble Dry. Low Heat. ⢠Do not bleach. ... Tumble Dry on Low Heat. .... fatigue ou sous l'influence de l'alcool, de drogues.
Calefacción baja: el diodo luminoso. (LED) azul permanece encendido. 2. Portabaterías. 3. Puerto del cable de alimentación. 4. Bolsillo del portabaterías. 5.
Have your heated hoodie serviced by a qualified repair person ... If you have a medical condition making you sen- sitive to ... If unreadable or missing, contact.
