COMPONENTS BODY CENTER CONTACT OUTER CONTACT INSULATOR GASKET OTHERS PARTS -
MATERIALS BRASS BRONZE BRASS PTFE ABS BRASS -
PLATING (µm) NICKEL -
NICKEL -
Issue : 1139 B In the effort to improve our products, we reserve the right to make changes judged to be necessary.
TECHNICAL DATA SHEET
2/4
R214.325.742
STRAIGHT HDC CONNECTOR C-C MALE CRIMP
Series : HDC 43
CABLE 4.5/75 S BLK20
PACKAGING SPECIFICATION Standard 20
Unit -
Other Contact us
CABLE ASSEMBLY
ELECTRICAL CHARACTERISTICS Impedance 75 Ω Frequency 0-3 GHz VSWR 1.25* + 0,0000 x F(GHz) Maxi Insertion loss NA √F(GHz) dB Maxi RF leakage -( NA - F(GHz)) dB Maxi Voltage rating 500 Veff Maxi Dielectric withstanding voltage 1500 Veff mini Insulation resistance 500 MΩ mini
MECHANICAL CHARACTERISTICS Center contact retention Axial force – Mating end Axial force – Opposite end Torque
22 N mini NA N mini NA N.cm mini
Stripping
a
b
c
d
e
f
mm
4,50
8,00
21,0
0,00
16,5
0,00
Assembly instruction :
Recommended cable(s)
Characteristics indicated on this data sheet are those that can be achieved with the highest performance cable. Intrinsic limitations of the cable may diminish the performance of the assembly
ENVIRONMENTAL Operating temperature Hermetic seal Panel leakage
-40/+100 ° C NA Atm.cm3/s NA
Part Number Description . . R282.287.000 CRIMPING TOOL Q92316 R282.281.010 CRIMPING TOOL MH800 R282.265.003 CRIMPING DIES Q92437
Hexagon .
5.18
OTHER CHARACTERISTICS * 0-1GHz
Issue : 1139 B In the effort to improve our products, we reserve the right to make changes judged to be necessary.
TECHNICAL DATA SHEET
3/4
STRAIGHT HDC CONNECTOR C-C MALE CRIMP
Series : HDC 43
CABLE 4.5/75 S BLK20
COMPOSA
R214.325.742
Contact central Center contact
COTES DE
Ferrule
e
a
b
Corps Body
c
Figure 1
Fig – 1 Slide the ferrule onto the cable. Strip the cable. Glisser la ferrule sur le câble. Dénuder le câble suivant les cotes ci dessus.
Adaptor /Adaptateur
Figure 2
Fig – 2 Place adaptor onto the cable until it bottoms against dielectric. Slide the centre contact into the adaptor until it bottoms against the cable dielectric. Crimp the centre contact with crimping tool ( see connector TDS ). Placer l’adaptateur sur le cable en buté contre le dielectrique Monter le contact central dans l’adaptateur en butée contre le diélectrique du câble. Sertir le contact central avec la pince ( voir fiche technique du connecteur ).
Crimping tool /Pince a sertir
Fig – 3
Figure 3
Fan the braid. Epanouir la tresse .
Fig – 4 Figure 4 Slide the cable into the body until it bottoms against insulator (push home until a click is felt) and slide the ferrule onto the braid . Monter le câble dans le corps en butée contre l’isolant jusqu'à encliquetage du contact central. Glisser la ferrule sur la tresse.
Fig – 5 Slide the ferrule over the braid. Crimp the ferrule with crimping tool ( see connector TDS ). Cut the excess of braid if necessary. Sertir la ferrule avec la pince ( voir fiche technique du connecteur ). Enlever le surplus de tresse.
Issue : 1139 B In the effort to improve our products, we reserve the right to make changes judged to be necessary.
Figure 5
TECHNICAL DATA SHEET
4/4
R214.325.742
STRAIGHT HDC CONNECTOR C-C MALE CRIMP
Series : HDC 43
CABLE 4.5/75 S BLK20
PACKAGING – BLK ( BULK )
Blister
Adaptor for crimping tool
Issue : 1139 B In the effort to improve our products, we reserve the right to make changes judged to be necessary.
CABLE 2.6/75 SINGLE SCREEN PACK 20. Series : HDC 43. Issue : 1040 F. In the effort to improve our products, we reserve the right to make changes judged to.
In the effort to improve our products, we reserve the right to make changes judged to be necessary. All dimensions are in mm. . . pn ao. COMPONENTS. BODY.
the HDC-950/930 associated portable camera, and the HDCU-. 900/950 camera ..... cameras, allows the CCD block to be extended from the camera body by up ...
Note: For deck thickness of less than 1.5 inch, the sleeve nut should be assembled like that in tech drawing. For deck thickness of less than 2.5 inch, the sleeve ...
Vidange mécanique en laiton - Chrome & ... Metal Handle Assembly Assemblage de. Ensamblaje de ... Assemblage de levier Ensamblaje del varilla à rotule.
medical devices, consult the devise manufacturer and/or your physician to .... Return of the Heated Jacket to a MILWAUKEE factory Service Center location, freight prepaid and ..... Miguel Hidalgo, Distrito Federal, México. 01 (800) 030-7777 o ...
dangerous and must be repaired. • Disconnect the battery pack from the heated hoodie before storing. Such preventive safety mea- sures reduce the risk of ...
High and the red LED will light. Temperature setting can be ..... 11/17. Printed in China. MILWAUKEE TOOL. 13135 West Lisbon Road. Brookfield, WI 53005 USA.
wash, Gentle Cycle in warm water. Tumble Dry. Low Heat. ⢠Do not bleach. ... Tumble Dry on Low Heat. .... fatigue ou sous l'influence de l'alcool, de drogues.
Calefacción baja: el diodo luminoso. (LED) azul permanece encendido. 2. Portabaterías. 3. Puerto del cable de alimentación. 4. Bolsillo del portabaterías. 5.
Have your heated hoodie serviced by a qualified repair person ... If you have a medical condition making you sen- sitive to ... If unreadable or missing, contact.
2. 1. 1. Power button. High: Red LED. Medium: White LED. Low: Blue LED. 2 ... Monday-Friday, 7:00 AM - 6:30 PM CST or visit www.milwaukeetool.com. Contact ...
Vidange mécanique en laiton - Chrome et nickel ... Assemblage de. Ensamblaje de manija ... Assemblage de levier Ensamblaje del varilla à rotule glóbulo.
Vidange mécanique en laiton - Chrome et nickel brossé ... Assemblage de la. Conjunto de la ... Assemblage de levier Ensamblaje del varilla à rotule glóbulo.
Vidange mécanique en laiton - Chrome et nickel brossé ... Assemblage de la. Conjunto de la ... Assemblage de levier Ensamblaje del varilla à rotule glóbulo.
Vidange mécanique en laiton - Chrome & ... Metal Handle Assembly Assemblage de. Ensamblaje de ... Assemblage de levier Ensamblaje del varilla à rotule.
