Important: Turn dial slowly and evenly. Do not turn back to regain alignment if you rotate past number. If an error is made, re-dial entire combination. DO NOT count turns. Count how many times each number is aligned with the opening index (at the 12 o’clock position). Always view the dial and ring straight on, not at an angle.
Important: Turn dial slowly and evenly. Do not turn back to regain alignment if you rotate past number. If an error is made, re-dial entire combination. DO NOT count turns. Count how many times each number is aligned with the opening index (at the 12 o’clock position). Always view the dial and ring straight on, not at an angle.
Step 1. Turn dial left, aligning first number with the opening index the fourth time it comes to the index.
Step 1. Turn dial left, aligning first number with the opening index the fourth time it comes to the index.
90
20
70
30
Step 2. Turn dial right, aligning second number with the opening index the third time it comes to the index.
90
50
0
90
50
0
40
30
To lock, turn dial left at least four revolutions.
SERIAL#
10 20 30
60
50
0
40
10
80
20
70
30 60
40
The serial number of your safe is listed below. If you lose the combination, or need service on your safe, you can use the serial number as a reference. Please keep the combination in a safe place, away from your safe.
0
40
70
90
70
American Security Products Co. 11925 Pacific Avenue (800) 421-6142 www.amsecusa.com
Step 3. Turn dial left aligning third number with the opening index the second time it comes to the index.
50
80
10 20
50
90
Step 4. Turn dial right until the bolt retracts.
80
60
20 30
10
30
10
70
Step 2. Turn dial right, aligning second number with the opening index the third time it comes to the index.
70
0
80
60
20
60
90
40
80
Step 4. Turn dial right until the bolt retracts.
To lock, turn dial left at least four revolutions.
10
80
60
Step 3. Turn dial left aligning third number with the opening index the second time it comes to the index.
0
50
40
The serial number of your safe is listed below. If you lose the combination, or need service on your safe, you can use the serial number as a reference. Please keep the combination in a safe place, away from your safe.
SERIAL#
Fontana, CA 92337
American Security Products Co. 11925 Pacific Avenue (800) 421-6142 www.amsecusa.com
B. Drill Trim Holes a. Drill holes in door face from both sides of door to avoid splintering wood. b. Chisel out notches on outside of door only. 2¹ââ". (54mm).
Compliance: FCC Part 15, Class B, Industry Canada ... [4.00 mm x 44.45 mm] ... 2-56 x 1-1/4â. [M1.4 x 0.3 x 31.50 mm]. 1X. 6 x 1/2â. [3.50 mm x 12 mm]. 5X ...
usuario para poner en funcionamiento el equipo. The Bluetooth® word mark and logos are registered trademarks owned by. Bluetooth SIG, Inc. and used under.
You use the return command, which also terminates the function: once it executes, you return to the ... return true;. } Indicating invalid knock; function returns false.
IMPORTANT: Master Lock 3630 is for locker doors hinged on right as you face door. Master ... This lock requires two mounting holes with a minimum diameter of 1/4in and a center hole with a 5/8in minimum ... be pointing down, to 6 o'clock.
Without a provision to cool the pump, va- por bubbles are formed at a rapid rate ... second electric pump of the continuous duty type, such as the Facet low ...
Jun 6, 2017 - The diagram below shows the individual components of the reverse lock mechanism. Note that the entire reverse lock mechanism is affixed to ...
File away burrs. 2. Insert bushing into hub. ... Position assembly onto shaft allowing for the small axial movement which will occur during lightening ... of all equipment in the system and the potential hazards involved. When risk to persons or ...
The ZR is fitted with a special failsafe protection designed to release the line if ... normal use during this five-year period, will be repaired or replaced by. Spinlock ...
[NLD]. ⢠Haakt om de sluitstangen van de container. ⢠Trekt zichzelf samen d.m.v. een ingebouwde veer. ⢠Wordt inclusief een discusslot geleverd met vijf sleutels. [FRA]. ⢠S'accroche autour des barres de fermeture du conteneur. ⢠Se serre
Jun 6, 2017 - a good idea to grease the reverse lock but a light cleaner spray, similar to WD40, can be used to help clean the mechanism. The diagram ...
aircraft we test at the CAFE Foundation for Sport A viation had fuel ... CAFE Foundation. Fuel system vapor ... A large percentage of "carb ice" incidents are really ...
4 sept. 2017 - i-LOCK - CONTROL AT YOUR FINGERTIPS. A series of easy to follow, drop down menus allows the administrator to: - Set up individual door locks. - Create/manage Mifare and Mobile Keys for guests. - Create/manage Mifare and Mobile Keys for
The approach presented in this document relies on Theodore ``The Tool'' works as a student at the MIT. This document and inner images are available under the ...