Connect the fixture to a suitable ground in accordance to local electrical codes. Connect the white fixture wire to the neutral power line wire with a wire nut. Connect the black fixture wire to the hot power line wire with a wire nut. Secure the fixture to the post with the post screws making sure to neatly tuck in all wiring.
Outdoor GENERAL PRODUCT INFORMATION: This product is safety listed for wet locations.
CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
This product may be dimmed with a standard incandescent dimmer. This instruction shows a typical installation.
Use minimum 90°c supply conductors.
1A
CLIP COVER
8
9 5
LAMP SHADE
GLASS PANEL
7
COVER SCREW
DOOR
COLLAR NUT SPACER
4
4
POST SCREW
SOCKET
3
2
POST
1
Connect the fixture to a suitable ground in accordance to local electrical codes.
2
Connect the white fixture wire to the neutral power line wire with a wire nut.
3
Connect the black fixture wire to the hot power line wire with a wire nut.
4
Secure the fixture to the post with the post screws making sure to neatly tuck in all wiring.
5
Install all glass panels (except the door) by carefully sliding them into the fixture and securing them using the clips.
6
Place the shade and spacer over the socket and secure them in place by screwing the collar nut onto the socket.
7
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
8
Install the cover to the top of the fixture and secure it using the cover screws.
9
Install the door glass panel by carefully sliding it into the door as shown.
1
1.1
ATTENTION : RISQUE D'INCENDIE Ce produit doit être installé conformément au code d'installation en vigueur par une personne familière avec la construction et l'exploitation du produit et les risques qu'il entraîne.
Utiliser les conducteurs d'alimentation supérieure à 90° c.
1A
CLIP COUVERCLE
8
9 5
ABAT-JOUR SHADE
PANNEAU DE VERRE
AMPOULE
7
VIS DE COUVERCLE
PORTE
ECROU DE COLLIER ESPACEUR
4
4
VIS DE POSTE
DOUILLE
3
2 DOUILLE
POSTE
1
Connectez le luminaire à un terrain approprié en accord avec les codes électriques locaux.
2
Connectez le fil blanc de luminaire au fil de ligne à neutre avec un écrou de fil.
3
Connectez le fil noir de luminaire au fil chaud de la ligne d'alimentation avec un écrou de fil.
4
Fixez le luminaire à la poste avec les vis de poste en s'assurant de rentrer facilement dans tout le câblage.
5
Installer tous les panneaux de verre (à l'exception de la porte) en les faisant glisser avec précaution dans le luminaire et les fixer à l'aide des clips.
6
Placez l'abat-jour et espaceur sur le douille et le fixer en place par vissage de l'écrou de collier sur la douille.
7
Visser l’ampoule dans la douille. Reportez-vous à l'étiquette sur la douille de l’ampoule pour obtenir des informations Max Puissance.
8
Installez le couvercle sur le dessus de le luminaire et le fixer avec les vis de couvercle.
9
Installez le panneau de verre de le porte en la faisant glisser avec précaution dans la porte comme illustré.
2
PRECAUCIÓN: RIESGO DE INCENDIO Este producto debe instalarse de acuerdo con el código de instalación aplicable por una persona familiarizada con la construcción y operación del producto y los riesgos que conllevan.
Utilizar conductores de suministro mínimo 90° c.
1A
CLIP CUBIERTA
8
9 5
BOMBILLA PANTALLA
PANELE DE VIDRIO
7
TORNILLO DE LA CUBIERTA
PUERTA
TUERCA DE COLLAR ESPACIADOR TORNILLO DEL POSTE
4
4 ENCHUFE
3
2
POSTE
1
Conecte la lámpara a una tierra adecuada de acuerdo con los códigos eléctricos locales.
2
Conecte el cable blanco de la lámpara al cable de línea de alimentación neutra con una tuerca para cable.
3
Conecte el cable negro de la lámpara al cable de línea eléctrica caliente con una tuerca para cable.
4
Fije la lámpara al poste con los tornillos del poste a meter cuidadosamente hacer seguro en todo el cableado.
5
Instale todos los paneles de vidrio (excepto la puerta) deslizándolos con cuidado en la lámpara y asegurándolos con los clips.
6
Coloque la pantalla y el espaciador sobre el enchufe y seguro en su lugar atornillando la tuerca de collar en el enchufe.
7
Atornille la bombilla a el enchufe. Consulte la etiqueta del casquillo de la lámpara para obtener información Max Potencia.
8
Instale la cubierta de la parte superior de la lámpara y fijarlo con los tornillos de la cubierta.
9
Instale el panele de vidrio de la puerta con cuidado deslizándolo en la puerta como se muestra.
Install all glass panels by carefully sliding them into the fixture and securing them using the clips. Place the shade and spacer over the socket and secure them in ...
Connect the black fixture wire to the hot power line wire with a wire nut. Secure the fixture to the post with the post screws making sure to neatly tuck in all wiring.
Secure the mounting plate to the electrical box with the two mounting plate screws. Connect the fixture ground wire to a suitable ground in accordance to local ...
Secure the mounting plate to the junction box with two mounting plate screws. Screw the ... Mount the fixture base onto the mounting plate and secure it with the fixture screws. .... Feiss reserves the right to ... A Generation Brands Company.
Place the shade and spacer over the socket and secure them in place by screwing the collar nut onto the socket. Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information. Install the cover to the fixture arm an
Secure the fixture to the post with the post screws making sure to neatly tuck in all wiring. Insert the shade into the frame and place it over the socket. Screw the lamp into the socket. Refer to the label on the socket for Max Wattage information.
Connect the black fixture wire to the hot power line wire with a wire nut. ... Refer to the label on the lamp socket for Max Wattage information. Install the glass ...
Connect the fixture to a suitable ground in accordance to local electrical codes. Connect the white fixture wire to the neutral power line wire with a wire nut.
Pediment 3 Light Outdoor Post. 1.1. OL11107. OL11107. Connect the fixture to a suitable ground in accordance to local electrical codes. Connect the white ...
This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Use minimum 90°c supply conductors. 2. POST. POST SCREW. 3. 4. 4. GL
Fije la parte superior del brazo a la cubierta de la lámpara colocando una arandela ... coloque el capuchon decorativo empujándola en el brazo completamente.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house junction box. Raise the housing up to the fixture so that the ...
Newport Outdoor Post. 1.1. OL14307. OL14307. Connect the fixture to a suitable ground in accordance to local electrical codes. Connect the white fixture wire to ...
Secure the fixture to the post with the post screws making sure to neatly tuck in all wiring. ... Place the cover over the frame and secure it in place by screwing the finial onto the nipple ... Feiss reserves the right to ... A Generation Brands Com
Insert the diffuser into the diffuser base, place the LED assembly on top of the diffuser, and secure it to the top of the housing ... A Generation Brands Company.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage information. Place the cover onto the frame nipple and secure it in place by screwing the cap onto the nipple. 6. CAUTION RISK OF FIRE. -. This product must be installed
CAUTION - RISK OF FIRE. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Use minimum 90°c supply conductors. 2. CAP N
registered trademark of Feiss. Feiss reserves the right to change specifications for product improvements without notification. A Generation Brands Company.
For a complete list of dimmers, visit out website at www.Feiss.com. This instruction shows a .... improvements without notification. A Generation Brands Company.
Augmenter le logement jusqu'Ã le luminaire de sorte que le attache sort par le haut de le luminaire et les fixer ensemble en vissant le fleuron sur le attache.
This product is listed by one of the following. â ationally ecognized esting aboratoryâ. N. R. T. L ... SUIVEUR DE BOUGIE. PANNEAU. DE VERRE. LOGEMENT. 2.
