DATE: Mar. 7, 2003 NOTE: This specification is subject to change without prior notice.

Specification of DVD-R/RW & CD-R/RW Drive (DVD-MULTI Drive)

TENTATIVE (Model UJ-815-BXX) Customer Distributor

Section: #3 Engineering Team Name:

Yasuichi Takechi

Signature: Date:

Mar. 7, 2003

Note

(Document No.: SP815X-P04) MATSUSHITA KOTOBUKI ELECTRONICS IND., LTD. STORAGE PRODUCTS BUSINESS UNIT

Page

1

CONTENTS 1.0 General

-------------------------------

2.0 Performance and Functional Specification -----2.1 Key feature 2.1.1 Data Format 2.1.2 Error Correction 2.1.3 IDE Interface 2.1.4 Transfer Rate --------------2.1.5 Disc Access Indicator 2.1.6 Data Buffer -----------2.1.7 Load Eject 2.1.8 CD-DA Audio on I/F Feature 2.1.9 CD-R/RW Media 2.1.10 Writing Method 2.2 Performance ----------------------2.2.1 Data/Audio Capacity 2.2.2 Burst Rate 2.2.3 Access Time - - - - - - - - - - - - - - - - - - - - 2.2.4 Spin Up and Spin Down Time - - - - - - - -

Page 3 Page 5

Page 6 Page 7

Page 8

Page 9 Page 10

3.0 audio Specification - - - - - - - - - - - - - - - - - - - - - - 3.1 Analog Audio 3.1.1 General 3.1.2 Line Out

Page 11

4.0 Environment - - - - - - - - - - - - - - - - - - - - - - - - - - - 4.1 Temperature 4.2 Humidity 4.3 Altitude 4.4 Vibration 4.4.1 Operating 4.4.2 Non-Operating 4.5 Shock -------------------------4.5.1 Operating 4.5.2 Non-Operating 4.6 Acoustic Noise

Page 12

5.0 Power Requirements 5.1 Source Voltage 5.2 Current

Page 14

--------------------

MKE SP815X-04: Product Specification of UJ-815-B Mar. 7, 2003

Page 13

of 24

6.0 Reliability and Serviceability --------------6.1 Uncorrectable Error Rates 6.2 Seek Error Rate 6.3 Design Life 6.4 Mean Time Between Failures (MTBF) 6.5 Mean Time To Repair (MTTR)

Page 2 of 24 Page 15

7.0 Mechanical Specification ------------------7.1 Drive Unit 7.1.1 Outer Dimensions 7.1.2 Weight 7.1.3 Mounting Orientation 7.1.4 Load/Eject Mechanism 7.1.5 Drive Handling Instruction 7.2 Connector

Page 16

8.0 Agency/Safety Certifications - - - - - - - - - - - - - - - 8.1 Safety 8.2 Electromagnetic Compatibility (EMC) 8.3 Laser Safety

Page 17

9.0 IDE Interface Description 9.1 Interface signals 9.2 DC Characteristics

Page 18

-----------------

10.0 IDE Commands 10.1 IDE ATA (Task File) Commands 10.2 IDE ATAPI Commands ---------------

Page 19

Appendix. A Mechanical Drawing (UJ-815-BXX) - - - - -

Page 22

MKE SP815X-04: Product Specification of UJ-815-B Mar. 7, 2003

Page

3

of 24

1.0 General This document describes the information on the MKE UJ-815-B, DVD-RAM/R/RW and CD-R/RW drive with ATA Packet Interface. The UJ-815-B can read the following types of disc: CD: CD-Audio CD-ROM (mode 1 and mode 2) CD-ROM XA (mode 2, form 1 and form 2) CD-I (mode 2, form 1 and form 2) CD-I Ready CD-I Bridge CD-R CD-RW Photo CD Video CD Enhanced Music CD CD-TEXT DVD: DVD-5 DVD-9 DVD-10 DVD-R (3.95G/4.7G) DVD-RW DVD-RAM (2.6G/4.7G) The UJ-815-B can operate in CAV mode for CD discs, and can operate in CAV mode for DVD discs, and can write in CLV or Z-CLV mode for DVD-RAM/R/RW and CD-R/RW discs. The UJ-815-B supports following DVD/CD discs and writing methods. DVD: DVD-RAM Random Access DVD-R 4.7GB for General (Ver.2.0) Disc at Once, Incremental DVD-RW(Ver.1.1) Disc at Once, Incremental, & Restricted Overwrite CD: CD-R, CD-RW Disc at Once Session at Once Track at Once Fixed / Variable packet writing Multi-session The UJ-815-B has audio circuits and Analog audio output in the integrated I/F connector Located on the rear of the drive, but does not have the ADPCM circuits. The MPEG data is not decoded. CD-DA data can be transferred via IDE I/F. MKE SP815X-04: Product Specification of UJ-815-B Mar. 7, 2003

Page 4 The outline of mechanical dimensions of the drive UJ-815-B is as follows. H: 12.7mm [Typ.] (excluding Front Bezel) W: 128mm [Typ.] (excluding Front Bezel) D: 129mm [Typ.] (including Front Bezel)

of 24

This drive is a slot in type drive (not a drawer type drive) that accepts to load only 120 mm disc for reading and recording, and can be mounted horizontal orientations. (80mm disc is not supported.) This drive is designed only for discs, which are marked, by CD logo, CD-R logo, CD-RW logo and DVD logo. Don’t insert any other abnormal shaped discs. (These discs will not be able to be loaded or ejected.)

MKE SP815X-04: Product Specification of UJ-815-B Mar. 7, 2003

Page

5

of 24

2.0 Performance and Functional Specification 2.1 Key feature 2.1.1 Data Format The DVD-RAM/R/RW and CD-R/RW drive (UJ-815-B) is capable of reading and writing, decoding and encoding Error Correction Code in real time and transferring over the IDE interface, the industry standard data format for compact disc in the following formats: 1. CD-DA as defined by " Red Book". 2. CD-ROM data in Mode 1 & Mode 2 as defined by "Yellow Book". 3. CD-ROM XA data Form 1 & Form 2 4. Disc containing combinations of Formats 1, 2, and 3 above in accordance to the current ISO and CD-ROM XA standards. 5. CD-I as defined by "Green Book", CD-I Bridge & CD-I Ready. 6. Single & multiple session discs as defined by "Orange Book Part2/3". 7. CD Rewritable discs as defined by “Orange Book Part3”. 8. Video CD as defined by "White Book". 9. Enhanced Music CD as defined by "Blue Book". 10. CD-TEXT mode 11. DVD Disc as defined by "DVD Specification for Read-only Disc Ver. 1.0" 12. DVD-R Disc as defined by “DVD Specification for Recordable Disc Ver. 2.0” 13. DVD-RW Disc as defined by “DVD Specification for Rerecordable Disc Ver.1.1” 14. DVD-RAM Disc as defined by “DVD Specification for Rewritable Disc Ver.2.1”

2.1.2 Error Correction The UJ-815-B is capable of performing real time error correction on the industry standard data format for a disc in the following formats: 1. CD-DA standard Red Book audio. 2. CD-ROM data in Mode 1. 3. CD-ROM data in Mode 2. 4. CD-ROM data in Mode 2, Form 1. 5. CD-ROM data in Mode 2, Form 2. 6. Disc containing combinations of Formats 1, 2, 3, 4 and 5 above in accordance to current ISO and CD-ROM XA standards. 7. DVD: RAM, ROM, R, RW standards

2.1.3 IDE Interface The UJ-815-B has an IDE interface which conforms to the ATA Packet Interface for DVDROM/RAM/R/RW and CD-ROM/R/RW. The IDE interface shall also comply with ANSI ATA/ATAPI-5.

MKE SP815X-04: Product Specification of UJ-815-B Mar. 7, 2003

Page

6

of 24

2.1.4 Transfer Rate

Read

WRITE

3.3X to 8X CAV

-

4.3 MB/s to 10.5 MB/s

-

2.5X to 6X CAV

-

3.3MB/s to 7.9 MB/s

-

1.7X to 4X CAV

2X CLV

2.2 MB/s to 5.3 MB/s

2.6 MB/s

1.7X to 4X CAV

-

2.2 MB/s to 5.3 MB/s

-

1.7X to 4X CAV

1X CLV

2.2 MB/s to 5.3 MB/s

1.3 MB/s

1X Z-CLV

-

1.3 MB/s

-

2X Z-CLV

2X Z-CLV

2.6 MB/s

2.6 MB/s

10.3X to 24X CAV

-

1550 KB/s to 3600 KB/s *1

-

10.3X to 24X CAV

16X Z-CLV *1

1550 KB/s to 3600 KB/s *1

2400 KB/s *1

5.2X to 12X CAV

8X CLV *1

776 KB/s to 1800 KB/s *1

1200 KB/s *1

DVD-Video

4X CAV

-

CD-DA (Audio Play)

12X CAV

CD-DA (Digital Play)

12X CAV(Max. 19.4XCAV)

DVD-ROM (single layer)

DVD-ROM (dual layer)

DVD-R 4.7GB

DVD-R 3.95GB

DVD-RW

DVD-RAM 2.6GB

DVD-RAM 4.7GB

CD-ROM

CD-R

CD-RW

CD-DA (Read) 19.4X CAV Note *1 in case of mode 1 form 2 data

-

2.1.5 Disc Access Indicator The UJ-815-B has a amber LED on the Front Panel and it indicates "BUSY".

MKE SP815X-04: Product Specification of UJ-815-B Mar. 7, 2003

Page

7

of 24

2.1.6 Data Buffer UJ-815-B has a data buffer that is implemented as a ring buffer. This buffer has a size of 2Mbytes.

2.1.7 Load Eject Mechanism Load You can load a disc semi-automatically. (To load the disc in the drive, it is needed to push the disc manually.) Unload You can unload a disc automatically by motor powered mechanism. You can unload a disc by the Eject button (optional) or Eject Command through the IDE interface.

2.1.8 CD-DA Features The UJ-815-B can play audio via a analog audio audio line-out in the integrated I/F connector Located on the rear of the drive. Volume control is provided by software control.

2.1.9 CD-DA Audio on I/F Feature CD-DA digital data is available through the IDE interface and an error flag can be transferred with CD-DA data. The CD-DA digital data has all normal CD-DA error correction, interpolation and de-emphasis performed prior to being transmitted on the IDE bus. In case of writing, on the other hand, the CD-DA digital data, which is transmitted on IDE bus, is encoded by normal CD-DA error correction and then added Sub-code data according to circumstances prior to being written on the CD-R/RW media.

2.1.10 CD-R/RW media All CD-R media must conform to Compact Disc Recordable (Orange Book Part2) provided by Philips Electronics N.V. All CD-RW media must conform to Compact Disc ReWritable (Orange Book Part3 and Part3 Volume2) provided by Royal Philips Electronics.

2.1.11 Writing Method UJ-815-B supports following Writing Method; CD: Disc at Once Session at Once Track at Once Multi-Session Fixed / Variable Packet Writing DVD: DVD-RAM DVD-R 4.7GB for General (Ver.2.0) DVD-RW (Ver.1.1)

Random Access Disc at Once, Incremental Disc at Once, Incremental, & Restricted Overwrite

MKE SP815X-04: Product Specification of UJ-815-B Mar. 7, 2003

Page

8

of 24

2.2 Performance 2.2.1 Data/Audio Capacity CD: Data Capacity

703 Mbytes (Mode 1) 797 Mbytes (Mode 2)

Playing Time

79 min 58 sec

Note: 1 Mbytes= 220 bits Data Capacity and Playing Time depend on Linear velocity and Track pitch of the disc. Maximum Data capacity for writing depend on each CD-R/RW media vender and Data format.

DVD: Data Capacity

DVD-RAM

2.6 Gbytes 4.7 Gbytes DVD-R 3.95 Gbytes 4.7 Gbytes DVD-RW 4.7 Gbytes Single Layer 4.7 Gbytes Dual Layer 8.5 Gbytes Single Layer Double Side 9.4 Gbytes

Note: Data Capacity and Playing Time are dependent on Linear velocity and Track pitch of the disc.

2.2.2 Transfer Rate (Burst Rate) PIO Multiword DMA Ultra DMA

Mode4 (16.67 Mbytes/s) Mode2 (16.67 Mbytes/s) Mode2 (33.33 Mbytes/s) Mode4 (66.67 Mbytes/s)

MKE SP815X-04: Product Specification of UJ-815-B Mar. 7, 2003

Page

9

of 24

2.2.3 Access Time CD-ROM: Random (*2) CAV mode

Full Stroke (*3) CAV mode

Typical Average Max.

150 ms 230 ms

Typical Average Max.

270 ms 400 ms

Notes: (*2) Average of Data read over the whole area from 00 min 02 sec 00 block to 59 min 58 sec 74 block, more than 2 000 times including latency and layered error correction time. Measurement Disc: MNSU-005 (*3) From 00 min 02 sec 00 block to 59 min 58 sec 74 block more than 2 000 times including latency and layered error correction time. Measurement Disc: MNSU-005 DVD-5: Random (*4) CAV mode

Full Stroke (*5) CAV mode Notes:

180 ms 260 ms

Typical Average Max.

360 ms 540 ms

(*4) Average of Data read over the whole area from starting data recorded area (LBA:0) to maximum data recorded area (LBA: 23197F), more than 2 000 times including latency and layered error correction time. Measurement Disc: MKE-D551 (*5) from starting data recorded area (LBA:0) to maximum data recorded area (LBA: 23197F), more than 2 000 times including latency and layered error correction time. Measurement Disc: MKE-D551

DVD-RAM(4.7GB):(TBD) Random (*6) CAV mode

Full Stroke (*7) CAV mode Notes:

Typical Average Max.

Typical Average Max.

250ms 350ms

Typical Average Max.

470ms 620ms

(*6) Average of Data read over the whole area from starting data recorded area (LBA:0) to maximum data recorded area (LBA: 22211F), more than 2 000 times including latency and layered error correction time. (*7) from starting data recorded area (LBA:0) to maximum data recorded area (LBA: 22211F), more than 2 000 times including latency and layered error correction time.

MKE SP815X-04: Product Specification of UJ-815-B Mar. 7, 2003

Page

10

of 24

2.2.4 Spin Up and Spin Down Time Spin Up Time From loading to ready (Not include disc loading time.)

From standby mode to ready

Spin Down Time Test Discs: CD: DVD-5:

Typical Max.

16 s (CD, DVD-5) 25 s (CD, DVD-5)

Typical Max.

5s 7s

Typical Max.

4s 6s

MNSU-005 MKE-D551

MKE SP815X-04: Product Specification of UJ-815-B Mar. 7, 2003

Page

11

3.0 Audio Specifications (CD-Audio) 3.1 Analog Audio 3.1.1 General Number of Channels Sampling Frequency Quantization

2 (Stereo) 44.1 kHz 16 bit linear

3.1.2 Line Out Output Levels Frequency Response Single to Noise Ratio Distortion Channel Separation

Typical 0.8 V[rms] (RL = 47 kΩ) 20Hz ∼ 20 000 Hz (±3 dB) Min. 75dB Max. 0.1% (at 1 kHz) Min. 60dB (at 1 kHz)

MKE SP815X-04: Product Specification of UJ-815-B Mar. 7, 2003

of 24

Page

12

of 24

4.0 Environment 4.1 Temperature (TBD) Operating

Read Write

Non-Operating

+5 °C ∼ +55 °C(center of TOP COVER) +5 °C ∼ +50 °C(center of TOP COVER) -30 °C ∼ + 65 °C

4.2 Humidity Operating (non-condensing) Non-Operating (non-condensing)

5%[RH] ∼ 90 %[RH] (maximum wet bulb temp. is 29 °C) 5 %[RH] ∼ 95 %[RH]

4.3 Altitude -305 m ∼ 3 050 m -305 m ∼ 15 250 m

Operating Non Operating

4.4 Vibration 4.4.1 Operating The UJ-815-B meet the uncorrectable error rate specification (described in section 6.1) with continuous sine wave vibration at following frequency range, magnitude and direction specified below; 5 Hz ∼ 300 Hz (Sweep rate is 1 octave/min.)

Read: 1.96 m/s2 {0.2 G} [peak] (along X, Y and Z axis) Write: 0.98 m/s2 {0.1 G} [peak] (along X, Y and Z axis)

4.4.2 Non-Operating The UJ-815-B will withstand continuous sine wave vibration at a frequency range, magnitude and direction specified below. 7Hz ∼ 300 Hz (Sweep rate is 1 octave/min.)

19.6 m/s2 {2.0 G} [peak] (along X, Y and Z axis)

MKE SP815X-04: Product Specification of UJ-815-B Mar. 7, 2003

Page

13

of 24

4.5 Shock 4.5.1 Operating The UJ-815-B meet the uncorrectable error rate specification (described in section 6.1 exclude CD-DA) with a half sine wave shock at a magnitude, interval and direction specified below. 11ms half sine wave (Input interval is 5 s.)

Read: 49.0 m/s2 {5.0 G} [peak] (along X, Y and Z axis)

Write: 4.9 m/s2 {0.5 G} [peak] (along X, Y and Z axis)

4.5.2 Non-Operating The UJ-815-B will withstand shock with a half sine wave shape at magnitude, interval and direction specified below. 11ms half sine wave

490 m/s2 {50 G} [peak] (along X, Y and Z axis)

2ms half sine wave

1960 m/s2 {200 G} [peak] (along X, Y and Z axis)

4.6 Acoustic Noise Microphone locates 1m above the drive. Access mode

50 dB [max.] (A filter)

MKE SP815X-04: Product Specification of UJ-815-B Mar. 7, 2003

Page

5.0 Power Requirements 5.1 Source Voltage Voltage Tolerance Ripple

+5V [DC] ±5% 100 mV [p-p]

5.2 Current(TBD) +5V [DC] max. (typ.) mA (*1)

Hold Track Read Write Seeking Spin Up Standby Sleep

CD 2000(1100) 2350(950) 1950(1300) 1950(1200) 2350(900) (100) ( 45)

Used Test Disc for Measurement

Notes

DVD 1750(900) 2050(900) 2000(950) 2750(1450) 2800(750) (100) ( 45) CD: MNSU-005, DVD: MKE-D551

(*1): max. ; pulse width = 2 ms or more

MKE SP815X-04: Product Specification of UJ-815-B Mar. 7, 2003

14

of 24

Page

15

of 24

6.0 Reliability and Serviceability 6.1 Uncorrectable Error Rates The UJ-815-B will meet the following error rates when reading from a following conditions disc CD that has a maximum block error rate of 3 in 10 E2 Mode 1 and Mode 2 Form 1 Less than 1 in 10 E12 Mode 2 Form 2 and CD Audio Less than 1 in 10 E9 DVD that has a maximum 280 PI errors in 8 ECC blocks Less than 1 in 10 E12

6.2 Seek Error Rate Seek Error Rate

Less than 1 in 10 E6

6.3 Design Life Traverse mechanism Horizontal; Tray loading mechanism

1000K seek or more (full stroke) (*1) 10K cycle or more

(*1) The 3 s of time interval between each seek should be taken.

6.4 Mean Time Between Failures (MTBF) MTBF is defined as following condition. Read and Access duty is 20 % of POH. MTBF

60K POH

6.5 Mean Time To Repair (MTTR) MTTR

30 min

MKE SP815X-04: Product Specification of UJ-815-B Mar. 7, 2003

Page

16

of 24

7.0 Mechanical Specification 7.1 Drive Unit 7.1.1 Outer Dimensions Height of drive Width of drive Depth of drive

12.7 mm [Typ.](excluding Front Bezel) 128.0 mm [Typ.] 129.0 mm [Typ.](including Front Bezel)

7.1.2 Weight (TBD) Weight of drive

238g [typ.]

7.1.3 Mounting Orientation Horizontal orientation This drive will be capable of operation when mounted within ± 5 º of the (left to right) horizontal position. In addition, the drive will be capable of operating with up to a ± 5 º tilt applied to the front to back dimension.

7.1.4 Load/Eject Mechanism (TBD) Disc insertion force (with Bezel felt) Disc insert position Disc eject position Disc Load Time Disc Eject Time

1N [max.] (See APPENDIX 1) (See APPENDIX 1) 1.5 s [typ.] 0.9 s [typ.]

7.1.5 Drive Handling Instruction (TBD) See APPENDIX 2

7.2 Connector The UJ-815-B has one connector that is 50-pin dual in-line, 0.8 mm pitch connector. This connector is assigned for IDE interface and power (JAE: KX15-50KLDL or Equivalent). Pin Assignment is described in Page 16. This connector is located at the rear of the drive.

8.0 Agency/Safety Certifications MKE SP815X-04: Product Specification of UJ-815-B Mar. 7, 2003

Page

8.1 Safety UL 1950 CSA 22.2 no.950 IEC Pub 950/EN 60950 SS-EN60950

8.2 Electromagnetic Compatibility (EMC) FCC Part 15 Class B Computing Device Peripheral (Compliance) CE Marking (EMC Directive 89 / 336 / EEC) EN55022 (CISPR Pub. 22) EN55024 EN61000-4-2 Test-spec. : 4 kV for contact discharge : 8 kV for air discharge EN61000-4-3 Test Spec. : 3 V/m (Modulation: AM80 % 1 kHz) EN61000-4-4 Test-Spec. : AC: 1 kV : DC: 0.5 kV : I/F: 0.5 kV (Min. 1minute) EN61000-4-5 Test-Spec. : AC: line to line 1 kV : line to ground 2 kV (Min. 1 time/minute) EN61000-4-6 Test-Spec. : 3 V (rms) (Modulation: AM80 % 1 kHz) EN61000-4-8 Test-Spec. : 1 A/m (1 minute) EN61000-4-11 Test-Spec. : Min. 10 seconds (3 times)

8.3 Laser Safety 21 CFR Subchapter J as a Class 1 laser device IEC 825-1 /EN60825-1

MKE SP815X-04: Product Specification of UJ-815-B Mar. 7, 2003

17

of 24

Page

18

of 24

9.0 IDE Interface Description 9.1 Interface signals Pin # 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49

Signal Name Audio L-ch Audio Ground Reset(10 kΩ Pull-up) DD7 DD6 DD5 DD4 DD3 DD2 DD1 DD0 Ground DIOWIORDY (10 kΩ Pull-up) INTRQ DA1 DA0 CS0DASP(10 kΩ Pull-up) +5V +5V Ground Ground CSEL (10 kΩ Pull-up) Test (47 kΩ Pull-up)

I/O O I I/O I/O I/O I/O I/O I/O I/O I/O I O O I I I I/O I I

I

Pin # 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50

Signal Name Audio R-ch N. C. DD8 DD9 DD10 DD11 DD12 DD13 DD14 DD15 DMARQ (10 kΩ Pull-down) DIORGround DMACK- (10 kΩ Pull-up) IOCS16(10 kΩ Pull-up) PDIAG(10 kΩ Pull-up) DA2 CS1+5V +5V +5V Ground Ground Ground Reserved

Table 1 - interface signal description

9.2 DC Characteristics Parameter Input Voltage Input Current Sink Hysteresis Output Voltage Output Current

Signal Level Low High 0.0 V [DC] ∼ 0.8 V [DC] 2.0 V [DC] ∼ 5.25 V [DC] 4 mA [min.] 0.2 V [DC] [min.] 0.0 V [DC] ∼ 0.5 V [DC] 2.4 V [DC] ∼ 5.25 V [DC] -0.4 mA [min.]

Note: Cable capacitive loading is 40 pF max.

Table 2 - IDE Interface DC characteristics

MKE SP815X-04: Product Specification of UJ-815-B Mar. 7, 2003

I/O O I/O I/O I/O I/O I/O I/O I/O I/O O I I O I/O I I I I I

Page

10.0 IDE Commands 10.1 IDE ATA (Task File) Commands Command ATAPI SOFT RESET CHECK POWER MODE EXECUTE DRIVE DIAGNOSTICS IDLE IMMEDIATE NOP PACKET COMMAND ATAPI IDENTIFY DEVICE SET FEATURES SLEEP STANDBY IMMEDIATE

Op. code 08h E5h 90h E1h 00h A0h A1h EFh E6h E0h

Table 3 - ATA Commands

MKE SP815X-04: Product Specification of UJ-815-B Mar. 7, 2003

19

of 24

Page

10.2 IDE ATAPI Commands Command Description BLANK CLOSE TRACK/RZONE/SESSION/BORDER FORMAT UNIT GET CONFIGURATION GET EVENT STATUS NOTIFICATION GET PERFORMANCE INQUIRY MECHANISM STATUS MODE SELECT (6) MODE SELECT (10) MODE SENSE (6) MODE SENSE (10) PAUSE/RESUME PLAY AUDIO (10) PLAY AUDIO (12) PLAY AUDIO MSF PREVENT/ALLOW MEDIUM REMOVAL READ (6) READ (10) READ (12) READ BUFFER READ BUFFER CAPACITY READ CD/DVD CAPACITY READ CD READ CD MSF READ DEFECT DATA READ DISC INFORMATION READ DVD STRUCTURE READ FORMATTED CAPACITY READ HEADER READ LONG READ SUB-CHANNEL READ TOC/PMA/ATIP READ TRACK/RZONE INFORMATION REPAIR RZONE REPORT KEY REQUEST SENSE REZERO UNIT RESERVE TRACK/RZONE SCAN SEEK (6) SEEK (10) SEND CUE SHEET Table 4 - ATAPI Commands

Op. code A1h 5Bh 04h 46h 4Ah ACh 12h BDh 15h 55h 1Ah 5Ah 4Bh 45h A5h 47h 1Eh 08h 28h A8h 3Ch 5Ch 25h BEh B9h 37h 51h ADh 23h 44h 3Eh 42h 43h 52h 58h A4h 03h 01h 53h BAh 0Bh 2Bh 5Dh

(Continued on the following page.)

MKE SP815X-04: Product Specification of UJ-815-B Mar. 7, 2003

20

of 24

Page Continued from the preceding page. Command Description SEND DVD STRUCTURE SEND KEY SEND OPC INFORMATION SET CD SPEED SET READ AHEAD SET STREAMING START STOP UNIT STOP PLAY / SCAN SYNCHRONIZE CACHE (FLUSH) TEST UNIT READY VERIFY (10) VERIFY (12) WRITE (6) WRITE (10) WRITE (12) WRITE AND VERIFY (10) WRITE AND VERIFY (12) WRITE BUFFER WRITE LONG

Op. code BFh A3h 54h BBh A7h B6h 1Bh 4Eh 35h 00h 2Fh AFh 0Ah 2Ah AAh 2Eh AEh 3Bh 3Fh

Table4 - ATAPI Commands

MKE SP815X-04: Product Specification of UJ-815-B Mar. 7, 2003

21

of 24

Page

MKE SP815X-04: Product Specification of UJ-815-B Mar. 7, 2003

22

of 24

Page

MKE SP815X-04: Product Specification of UJ-815-B Mar. 7, 2003

23

of 24

Page

MKE SP815X-04: Product Specification of UJ-815-B Mar. 7, 2003

24

of 24