SSMTT-35 Micro OTDR
Product Presentation
20 Rue de Billancourt 92100 Boulogne-Billancourt Téléphone : 33 (0) 1 41 22 10 00 Télécopie : 33 (0) 1 41 22 10 01 Courriel :
[email protected] TVA : FR00722063534
OTDR Block Diagram
1310 nm laser 1550 nm laser Photo Diode
WDM Connector Coupler
ELEXO - Téléphone : 01 41 22 10 00 - Fax : 01 41 22 10 01 -
[email protected]
2
Metro Network (BPON) POTS Ethernet Video
POTS Ethernet Video
ONT ONT
ONT ONT
POTS Ethernet Video
ONT ONT
Residence
ONT ONT
OLT
DS1
Optical Splitter ONT ONT
CO
Ethernet
OLT – Optical Line Termination (OLT). Business Provides the network interface for the PONs. ONT – Optical Network Termination. Provides interfaces to customer’s telephone, data and video equipment. Each PON can support up to 32 ONTs and consists of fiber-optic cable & passive optical couplers. ELEXO - Téléphone : 01 41 22 10 00 - Fax : 01 41 22 10 01 -
[email protected]
3
OTDR measurement ONT ONT
ONT ONT ONT ONT ONT ONT
Optical Splitter ONT ONT
OTDR module Locate any fault occurring on a fiber link in PON network. Auto analysis of OTDR trace and provide Event table Store results in Bellcore format Generate reports ELEXO - Téléphone : 01 41 22 10 00 - Fax : 01 41 22 10 01 -
[email protected]
4
Link Characterization ONT ONT
ONT ONT ONT ONT
Optical Splitter
Verify a fiber characteristic of each fiber separately. Typical attenuation are around: 0.33 dB/km at 1310 nm 0.22 dB/km at 1490 nm 0.19 dB/km at 1550 nm ELEXO - Téléphone : 01 41 22 10 00 - Fax : 01 41 22 10 01 -
[email protected]
5
Back Reflection Testing ONT ONT
ONT ONT ONT ONT
Optical Splitter
Verify back reflection from the optical splitter or connectors. Back reflection should be around –30 to –35 dB at splitter port. ELEXO - Téléphone : 01 41 22 10 00 - Fax : 01 41 22 10 01 -
[email protected]
6
Fault Locator ONT ONT
ONT ONT ONT ONT
Optical Splitter
During fiber installation and maintenance, identify the precise location of any fiber breaks on a link.
ELEXO - Téléphone : 01 41 22 10 00 - Fax : 01 41 22 10 01 -
[email protected]
7
Operation Modes
Auto mode – For quick and easy-to-use measurement – Most settings will be automatically selected by software. User only needs to set wavelength, measurement unit, IOR. – Provide both OTDR trace and Event table
Advanced (Manual) mode – Allow a user to set pulse width, averaging, distance range – Provide OTDR trace only
ELEXO - Téléphone : 01 41 22 10 00 - Fax : 01 41 22 10 01 -
[email protected]
8
Complete testing in one button
The most simple steps to get your work done! Power ON Connect the fiber Press AUTO key
ELEXO - Téléphone : 01 41 22 10 00 - Fax : 01 41 22 10 01 -
[email protected]
9
Dynamic Range
How long of fiber can be measured? It is determined by dynamic range of OTDR. For SNR=1, the measurement is done at 3-minute average of 10 µs pulse width. ELEXO - Téléphone : 01 41 22 10 00 - Fax : 01 41 22 10 01 -
[email protected]
10
Dual Trace Capability
Display 2 traces simultaneously for detailed comparison previous VS current record 1310 nm VS 1550 nm wavelength difference pulse width
ELEXO - Téléphone : 01 41 22 10 00 - Fax : 01 41 22 10 01 -
[email protected]
11
Attenuation Dead Zone
Attenuation dead zone is the range where loss measurement will not be accurate ELEXO - Téléphone : 01 41 22 10 00 - Fax : 01 41 22 10 01 -
[email protected]
12
Event Dead Zone
Event dead zone is the area where OTDR can not differentiate 2 closed events ELEXO - Téléphone : 01 41 22 10 00 - Fax : 01 41 22 10 01 -
[email protected]
13
Distance Uncertainty
Determine accuracy of distance measurement. Distance uncertainty (m): ∆L = ± (dl + dL + 5 x10-5L), where dl = 1 m is the distance scale offset; dL is resolution L - measured distance, m.
ELEXO - Téléphone : 01 41 22 10 00 - Fax : 01 41 22 10 01 -
[email protected]
14
Trace Viewer Screen See all major settings on top of screen: file name, Laser ON, 1550 nm wavelength, 100 n sec. pulse width, 3-minutes averaging time
Complete list of OTDR functions Zoom A↔B
markers Event table Save Grid line
Complete OTDR trace in one compact screen
ELEXO - Téléphone : 01 41 22 10 00 - Fax : 01 41 22 10 01 -
[email protected]
15
Event Table
Auto analysis provides the list of events found on a fiber link. It displays symbol, location, loss, and reflectance of each event.
ELEXO - Téléphone : 01 41 22 10 00 - Fax : 01 41 22 10 01 -
[email protected]
16
OTDR Specification
Laser Classification:
Class 1
Wavelength (nm)
SM:1310/1550
Pulse width (ns):
10, 30, 100, 300, 1000, 3000, 10000
Dynamic Range (dB)
27/25 dB
Event Dead Zone (m)
5m
Attenuation Dead Zone (m) 25 m Color Screen Chassis
SSMTT-C, SSMTT-ACM, SSMTT-EX
ELEXO - Téléphone : 01 41 22 10 00 - Fax : 01 41 22 10 01 -
[email protected]
17
Resolution
Measurement result is determined by the number of data points over the distance range. At 16,000 data points, the resolution is 0.6 m for 5 and 10 km distance range, 1.3 m for 20 km distance range, 2.5 m for 40 km distance range, 5.1 m for 80 km distance range, 7.6 m for 120 km distance range
ELEXO - Téléphone : 01 41 22 10 00 - Fax : 01 41 22 10 01 -
[email protected]
18
Bellcore Standard
Bellcore GR-196-CORE – Generic Requirements for Optical Time Domain Reflectometer (OTDR)-Type Equipment
Telcordia Technologies SR-4731 – Optical Time Domain Reflectometer (OTDR) Data Format
ELEXO - Téléphone : 01 41 22 10 00 - Fax : 01 41 22 10 01 -
[email protected]
19
Calibration
The unit should be returned to factory for calibration Recalibration period is 12 months
ELEXO - Téléphone : 01 41 22 10 00 - Fax : 01 41 22 10 01 -
[email protected]
20
Don’t forget …. Complete list of optical test modules in MTT modularity Visual Fault Locator Loss Test Set Light/Laser Source Power meter Variable attenuator Channel Monitor (DWDM, CWDM) Gigabit Ethernet Fiber Channel …. ELEXO - Téléphone : 01 41 22 10 00 - Fax : 01 41 22 10 01 -
[email protected]
21
..and all other MTT Modules!
ELEXO - Téléphone : 01 41 22 10 00 - Fax : 01 41 22 10 01 -
[email protected]
22
