technical acceptance certificate

5 janv. 2014 - This device can be used in mobile / portable configurations. ... equipment, are acted on accordingly by the issuing office and will depend on the ...
215KB taille 12 téléchargements 362 vues
TECHNICAL ACCEPTANCE CERTIFICATE THE FOLLOWING EQUIPMENT HAS BEEN TESTED AND CERTIFIED UNDER INDUSTRY CANADA

Issued By: Compliance Testing, LLC 1724 S. Nevada Way Mesa, AZ 85204 USA Equipment Certification is hereby issued to the Identified Certificate Holder and is VALID ONLY for the equipment identified herein. La certification du matériel est distribuée à la Société identifiée et est VALIDE SEULEMENT pour l’équipement identifié ci-dessous. NOT TRANSFERABLE / PAS TRANSMISSIBLE

Date of Issue: 3/9/2016 Type of Certification: New Single Issued To / Délivré a: TASER International, Inc. 17800 N. 85th Street Scottsdale, Arizona 85225

Certification No. / No. De Certification:

8803A-S01000A

Type of Equipment/ Type De Matériel:

Bluetooth Device

Model Number / Modele:

T00378

Frequency Range / Band de Fréquences:

2408MHz - 2480MHz

Emission Designator / Designation Démission:

F1D, F7D

RF Power Rating / Puissance Nominale H.F.:

0.001

Antenna Information / L’information D’antenne:

1.5dBi

Test Laboratory / Laboratoire D’essai: Compliance Testing, LLC IC Site # / Numéro De Site: 2044A-2 Certified to Specification / Certifie Selon Le Cahier Des Charges: RSS-247

Certification Notes: Power Output listed in Conducted. This device can be used in mobile / portable configurations.

Certified By: Shawn McMillen

Signature: ________________ Certification of equipment means only that the equipment met the requirements of the above noted specification(s). License applications, where applicable to use certified equipment, are acted on accordingly by the issuing office and will depend on the existing radio environment, service and location of operation. This certificate is issued on condition that the holder complies and will continue to comply with requirements and procedures issued by Industry Canada. La certification du matériel signifie seulement que le matériel a satisfait aux exigences de la norme indiquée ci-dessus. Les demandes de licence nécessaires pour l’utilisation du matériel certifié sont traitées en conséquence par le bureau de délivrance et dépendent des conditions radio ambiantes, du service et de l’emplacement d’exploration. Le présent certifcat est délivré à la condition que le titulaire satisfassee et continue de satisfaire aux exigences et aux procédures d’Industrie Canada

Reference No./ No. De Référence: p1620001 Create: JS-MS Updated: 5/1/2014 Form: CB-760 IC Technical Acceptance Certificate L:\Project\2016\p1620004-Taser Int\TCB Folder\Grant Docs\CB-760 IC Technical Acceptance Certificate.docx

Rev 3