Test and Evaluation Products - F6FGZ

The software and documentation choices are shown in the accessories section of ... scribed elsewhere in this document). Kit includes: GPS Receiver, active GPS ...
284KB taille 60 téléchargements 307 vues
Test and Evaluation Products Your skilled connection to MOTOROLA

ONCORE™ GPS Products SYNERGY SYSTEMS, LLC

Evaluation Kits for testing and evaluating MOTOROLA Oncore™

GPS Products

Several types of evaluation kits are available for testing and product development applications for Motorola Oncore™ board level and ChipSet GPS products. The needs of the project, the technical expertise of the user and the budget available usually determine which of the following Evaluation Kits should be chosen. All kits are shipped from stock.

Specializing in the quality and power of Motorola Oncore ™GPS Products

Starter Kit for M12+ 12 Channel Receiver: This dual port, M12+ development board (no enclosure) is suitable for laboratory testing of the M12+ and the M12+ Timer GPS receivers. The first DB-9 connector is the main RS-232 port and the second DB-9 connector is dedicated to RTCM-104 Differential GPS (DGPS) correction signal input. On-board LEDs indicate Power On, TXD, RXD, 1PPS, and DGPS In. The kit consists of an M12+ Development Board; M12+ GPS Receiver; International Power Supply Kit, 110-264 VAC input, 9VDC output, wall mount; Motorola’s Hawk GPS antenna; and standard 9 pin serial cable. The software and documentation choices are shown in the accessories section of this catalog. Ordering information:

M12+ Evaluation Kit M12+ Timing Evaluation Kit

(Manual Optional)

l) na o i pt (O

P/N 10001470 P/N 10001471

Synergy Dual Port SynPaQ/III Eval Kits: Tested, Approved & recommended by Motorola The SynPaQ/III sensor includes an industry standard DB-9 Serial Port for data I/O. Separate connectors are provided on the front panel for RTCM-104 DGPS input, power input, and 1PPS monitoring. The SynPaQ/III front panel features four LED indicators for 1PPS on, Data receive (RXD), Data transmit (TXD), and DGPS input. Also, the SynPaQ/III features an RS-232 level 1PPS signal wired to the DCD line on pin 1 of the DB-9 connector for testing network timing applications. A second buffered TTL 1PPS output signal for monitoring is available on the front panel. In addition to the SynPaQ/III GPS sensor, the kits include an active Motorola Hawk GPS antenna, a wall-mounted international power supply, a cigarette lighter adapter, a serial data cable, technical manual, and SynTac test software. Ordering Information: M12+ for Tracking M12+ for Timing Total Kit: P/N 10001552 P/N 10001554

M12+ Adaptor Card:

Please call for additional configurations and request Tech-Note 310E.

The M12+ Adaptor Card plugs into all existing Motorola Evaluation Kits (shipped since 1996) and all existing Synergy Systems, LLC XTS Series GPS Sensor products. Also, the M12+ Adaptor card can be used in place of all legacy GPS board level products including the GT+, the UT+ and the VP Oncore™. The M12+ Adaptor Card contains the 5VDC to 3VDC regulator circuit. An on-board jumper allows use with either a 3VDC or 5VDC GPS antenna. Ordering information: Adaptor Card P/N 10001460 (R/A OSX Connector) with M12+ GPS receiver Adaptor Card P/N 10001461 (ST OSX Connector) with M12+ GPS receiver Adaptor Card P/N 10001463 (MMCX Connector on M12+) with M12+ GPS receiver Adaptor Card P/N 10001466 (R/A OSX Connector on M12+) with M12+ Timing w/ bat Adaptor Card P/N 10001473 (R/A OSX Connector on M12+) with M12+ Timing w/o bat Adaptor Card P/N 10001479 (MMCX Connector on M12+) with M12+ Timing w/o bat Adaptor Card P/N 10001464 (R/A SMA Jack) with M12+ GPS receiver Adaptor Card PN 10001464 (R/A SMA Jack) with M12+ GPS receiver

SYNERGY SYSTEMS, LLC • PHONE: (858) 566-0666 • FAX: (858) 566-0768 • TOLL FREE: (888) 479-6749 • E-MAIL: [email protected] • WEB SITE: WWW.SYNERGY-GPS.COM

GSynQ Smart Antenna Evaluation Kits GSynQ combines Motorola’s 12 channel M12+ GPS receiver with Motorola’s dual filtered, UL approved, Timing2000 GPS antenna into a single, easily installed unit. Three versions of the GSynQ smart antenna evaluation kit are available and they include all items necessary to fully test this product. The models are the GSynQ/B, for DGPS Base Station and general timing applications, the GSynQ/T, for OEM precision timing products, and the GSynQ/A for general tracking and positioning. A Power/Data Interface Unit is supplied with the GSynQ/B and GSynQ/T kits. The Interface Unit connects to any standard, IBM compatible computer and includes LED indicators for Pwr On, and data line activity for TXD, RXD and 1PPS. The GSynQ/A kit includes a special GSynQ to computer Interface Cable to provide both power and data functions in place of an Interface Unit. Ordering information: GSynQ/T P/N 10001509 OEM Precision Timing

GSynQ/B P/N 10001506 Base Station/ Gen Timing

GSynQ/T Eval Kit

GSynQ/A Eval Kit

Drive Test Kit:

GSynQ/A P/N 10001504 Tracking/Positioning

The SynPaQ/III systems have replaced the XTS/IIs. The SynPaQ/III-GT+, which produces the Motorola 8 channel binary @@Ea message, is approved by Motorola iDEN for use with the SAFCO Field Test Application (FTA). The SynPaQ/III-GT+ also operates in NMEA mode. The lower cost SynPaQ/III-M12 is a 12 channel GPS sensor ideal for any system that uses NMEA protocol. This kit is upgradable to the new Motorola M12+, 12 channel GPS Receiver (see the M12+ adaptor card described elsewhere in this document). Kit includes: GPS Receiver, active GPS Antenna, Power/Data Cable, and Cigarette Adaptor. Technical Manual, TRM0003, and SynTAC Software are optional and shown elsewhere in this catalog.

Ordering information: SAFCO FTA Drive Test Kit MAC Drive Test Kit

Contact Synergy for Part Numbers Contact Synergy for Part Numbers

SYNERGY SYSTEMS, LLC • PHONE: (858) 566-0666 • FAX: (858) 566-0768 • TOLL FREE: (888) 479-6749 • E-MAIL: [email protected] • WEB SITE: WWW.SYNERGY-GPS.COM