Z-MAX high performance modules are the culmination of a unique âpress and sinterâ manufacturing process discovered by Tellurex. The patented metallurgical.
Negative (–) Module Thermal Interface Material Heat Sink
Thermoelectric Module Cutaway
Fiber Washer Metal Flatwasher Steel Lockwasher Stainless Steel Screw
Typical System Assembly
Thermoelectric (Peltier) modules package semiconductor pellets in a special ceramic substrate array, which is uniquely configured to pump heat. When direct current energizes the module, heat is absorbed on one ceramic surface, then is actively pumped through the semiconductor array to the ceramic substrate on the opposite side; here the heat is released. Typically, these devices are mounted with a thermal load on one side and some form of heat sink (and often a fan) on the other. When used in cooling mode, the thermoelectric device pulls heat from the thermal load and transfers it to the heat sink (where the energy can be dissipated into the ambient environment). Unlike passive approaches to thermal conditioning — which can only limit the rise above ambient —
Stock No.
Z-Max® is a unique and patented thermoelectric device, pioneered by the Tellurex Corporation. Z-MAX high performance modules are the culmination of a unique “press and sinter” manufacturing process discovered by Tellurex. The patented metallurgical techniques which are employed, not only result in a module that is more efficient, reliable and inherently stronger than conventional devices, but offers unsurpassed performance. Performance Specifications @ THOT = 50°C
Dimensions (mm)
Mfr.’s Type
thermoelectric technology can actively remove heat to bring the thermal load to a belowambient state. Furthermore, the device can shift from cooling to heating mode, simply by reversing the polarity of the applied DC voltage.
∆T Across Device in C°
Q (Thermal Load)
EACH
Electrical Characteristics*
A
B
C
D
∆T Max. @ Q=0
Typical Range of Operation†
Q Max. @ ∆T=0
Typical Range of Operation‡
IMAX
VMAX
1-24
25-99
957-1000
CZ1-1.4-127-1.14
40.0
40.0
44.0
3.3
79°
30-50°
78.0 W
18-38 W
8.0 A
16.1 VDC
29.00
24.50
957-1002
CZ1-1.4-127-1.65
40.0
40.0
40.0
3.8
79°
30-50°
56.0 W
10-25 W
5.6 A
16.1 VDC
29.00
24.50
957-1004
CZ1-1.4-63-1.65
20.0
40.0
40.0
3.8
79°
30-50°
27.8 W
6-12 W
5.6 A
7.9 VDC
20.85
16.75
957-1006
CZ1-1.0-127-1.27
31.0
31.0
34.0
3.3
79°
30-50°
38.7 W
8-17 W
3.9 A
16.1 VDC
21.50
17.00
*Values which will yield maximum ∆T in a system. †Normal range of operation in a complete TE system with significant thermal load. ‡Normal range of operation in a complete TE system with significant ∆T.
Prototype Starter Kit Fully integrated, compact, thermoelectric cooler assembly with cold plate, CZ-1.0-127-1.27 Z-MAX module, heat sink, and fan. This hands-on introduction to thermoelectrics is ready to use as an educational tool or prototype component. The Starter Kit requires a 12 volt DC power source and has built-in over temperature protection (85°C).
engine coolant, remove the cap only when the engine is cool. Total Cooling System Capacity: Including expansion tank 2.1 (2.2 US qt, ... ENGINE OIL. COOLER ...
â¢Damage caused by abuse, accident, misuse, or neglect. ⢠Transportation of the unit or component from the customer to Koolatron. IMPLIED WARRANTIES.
Engine cooling is a popular topic in homebuilt circles. ... More total flow translates into more drag on the airframe. In other words .... the engine and oil cooler.
Closed Cooling Systems With Coolant Flow. Thru Exhaust .... IMPORTANT: The following information should be observed ..... (drug store, pet shop, etc.). 2.
COOLING SYSTEM. ON-VEHICLE INSPECTION .... Manual air conditioning system. Automatic air ..... condenser assembly or piping when removing the radiator ...
The water pump must be serviced after removing the engine. Other cooling ... Avoid spilling coolant on painted surfaces because the coolant will corrode the painted surfaces. Wash off any spilled ... Drain the coolant. (â¨3-9). Disconnect the air ..
Department of Chemistry, Beloit College, Beloit, WI 53511 .... This motor could be run for about 6 minutes after the device had received power for ten to ..... These include solid-solution alloying of different semiconductors and .... See Atkins, P.
May 17, 2002 - 8.1.11 Interrupt Mask Input Any Change Bit 1 to 128 .. Interrupt Mask Input ... Interrupt Mask Input Low-to-High Bit 897 to 1024. (6060h .. 6067h).
Jan 8, 2010 - By adopting this approach all manufacturers will specify their devices in a similar fashion ... like Boolean, integer, floating point, string, etc. .... naming convention the CMS Name is 401RPDO001xxx, where xxx is the module-id.
The corrugated fin high efficiency radiator is located in the front of the engine compartment and incorporates ... Then unscrew the two crosshead screws securing.
The water pump must be serviced after removing the engine. Other cooling ... tester and apply specified pressure to it. It must hold .... water pump shaft with the tab on the oil pump shaft. ... over a burner and measure the resistance through the ..
c - Remove Drain Plugs From Exhaust Exhaust Manifold Drain Elbows and Fuel Cooler or Water Tube (Repeatedly Clean Out Holes ... Refer to manufacturer's instructions for in- ... b - Seawater Inlet Slot (MUST Face Forward - Parallel with.
The radiator fan draws air through the radiator core when there is ...... Lift the rocker case clear of the dowel pins in the cylinder head and ..... Closed Coil End [G] ...
The jets of oil cool the internal walls of the cylinder and, guided by vanes fitted inside the piston body, reach the lower base of the piston head thereby cooling it.
Mar 24, 2009 - about what's in the package (a list of pure Python modules, in this case). ⢠modules are specified ..... email address of the package maintainer.
Mar 6, 2014 - 3. XBee/XBee-PRO RF Module Configuration28. Programming the RF Module 28. Programming ..... pattern. Metal objects between the transmitter and receiver can block the radiation path or reduce ...... AT Command: ATSC.
that cylinders crack or oil temperatures rise above red- line. There are several cowling fasteners available, and not all are of the same strength and ease of use.
Dec 6, 2017 - program at login time which mounts the user's home directory. 8 .... $P4: //depot/projects/openpam/bin/su/su.c#10 $. * $FreeBSD: head/en_US.
