TOOLS & ACCESSORIES Wheels and Center Caps Tires Bonnet and Body Accessories Doors and Fittings Handles and Winders Mirrors and Bumpers Wheel Arches and Flare kits Roll Cages and Moldings Grilles Dress up parts Petrol Tanks Guages Dashes Mats and trim Cobra seats Knobs and Pedals Steering Wheels Race and Rallying parts Tools Books and Videos Keyfobs and Stickers Toys Mini Mania
13
13-1
WHEELS 2
1
6
3
5
4
7
6
8
13-2
9
www.MiniMania.com e-mail
[email protected] 800-946-2642 Tech: 408-942-5595
DESCRIPTION 1.
REVO
Genuine Revolution Wheels. The original style 4 spoke specification which are complete with center caps for the 63mm hole and stainless steel sleeved wheel nuts, except for the 13 wheel, has a different size chrome nuts. REVO1= 5 x 10 4 spoke, REVO2= 6x10 4 spoke, REVO3 = 5 x 12 4 spoke, REVO4= 6x12 4 spoke REVO5= 6 x 13 4 spoke.
2.
REVO
New 5 spoke RFX range as fitted to Mini Cabriolet and German Special Editions. The original 4 spoke Revolution fitted a sleeve type nut, but because RFX take standard type wheel nuts they are not supplied. The 5x12 RFX uses the Mini/ Cooper late type wheel nut NAM9075. The 6x13 RFX takes the large seat radius type CN5. REV11= RFX 6 x13, REV12= RFX 5 x12
3.
Minilite
This is the new designed wheel by the newly formed Minilite Company. Their wheels have the new distinctive logo center cap, the word Minilite embossed onthe rim. D344/A = 5x10, D456/A= 6x10
4.
Mamba
The old and original Mamba as used since the 1960s worldwide, is available in 5 x10 and 6 x10, complete with center cap and stainless steel sleeved wheel nuts. WHL1012=5 x10, WHL1013=6 x10
5.
Superlite
Austalian 6x13. * spoke type wheel. Includes CN5 chrome wheel nuts. C-21A1071
6.
Minilife
Mini Spares own minilife 5x12 wheel shown in anthracite with diamond cut edge. From the same designs as all the minilife range, depicting the sporting character of the 60s and 70s, which have the image favoured for the 90s coopers. Also available in silver 41/2x10. Complete with front fitting center cap to fit the 67mm hole and stainless sleeved wheel nuts have a tapered washer for extra alignment quantities. These wheels are being subject to testing for T.U.V.(Germany) and J.W.L.(Japan). Wheels sold individually. For For For For
anthracite diamond silver diamond cut anthracite diamond silver diamond cut
cut 5x12 C-21A1965 5x12 C-21A1966 cut 4.5x10 C-21A1963 4.5x10 C-21A1964
7.
Minilife
The rest of the Minilife range of wheels. These are the original, silver all over, Minilite wheels that are faithful reproductions of those used by Special Tuning Abingdons works and classic cars of the 60s and 70s. All supplied with stainless steel sleeved wheel nuts and center caps.
8.
C-21A1967
The original 5 x 12 sprayed in Silver with center cap to fit the 67mm hole and stainless steel sleeved wheel nuts, with a tapered washer for better centralization.
9.
C-21A1968
The original thick front rimmed 4 1/2 x10 wheel fits within the bodyline without requiring wheel arches, as per Special Tuning Abingdon specification in LM25 alloy.
13
Mini Mania
13-3
WHEELS 2
1
5 4 3
9
6
7 8
11
13-4
12
10
13
www.MiniMania.com e-mail
[email protected] 800-946-2642 Tech: 408-942-5595
DESCRIPTION 1.
Rover
Original Rover latest 13x6 only. Wheel used on cars with sportspack. Order individually as part number RRC109640NMH.
2.
Rover
Similar 5x13 6X13 7X13
3.
Miniator
5x10 Miniator 8 spoke wheel very similar to GB alloy with a center cap size of 51mm. This uses standard nuts as used on pre 1984 steel wheels or chrome versoins CN4 or CN1. Supplied less nuts. # WHL1000
4.
Miniator
5x13 Miniator 8 spoke alloy wheel is available in silver or antracite with diamond cut edge wityh center cap for 59mm hole. Uses standard nuts as fitted to steel wheels 1984 on with 60 degree taper or chrome CN2 as an alternative. Supplied less nuts. -Miniator in silver all over to fit Mini-5x13 # WHL1005 -Miniator in silver all over to fit MG midget or sprite. Same wheel but with built in 5mm spacer.-5x13 # WHL1006 -Miniator in anthracite with diamond cut edge to fit mini. 5x13 # WHL1007
5.
Miniator
5.5x13 Miniator wheel in silver only for Mini. Uses standard nuts used on steel wheels 1984 on with 60 degree taper or chrome CN2 as an alternative. -# WHL1008
6.
Caps
Cap for Miniator 13 wheels. 59mm wide front fitting with badge/logo face area of 40mm. # WHL1010
looking sports pack wheelwith 55mm centre cap hole. WHL1017 RRC109640MS WHL1020
Cap for Miniator 10 wheels. 51mm center whole fitting.(not shown) #WHL1011 7.
Caps
Weller steel wheel cap for 10 wheels. 63mm back/rear fitting with badge logo face area of 45mm. Comes with weller sticker seperate. #WELLA CAPS Weller steel wheel cap for 13 wheels. 69mm back/rear fitting with badge/logo face area of 45mm. Weller stickers are seperate. # WELLA CAPS12
8.
Caps
Mamba cap, 76mm wide, front fitting. # WHL1014
9.
Caps
Minilife cap, 67mm wide front fiting with badge/logo face area of 40mm. Minilife sticker seperate. Fits most original Tech Del Minilite wheels (check size). # C-21A1970
10. Caps
Revolution plastic front fitting cap, 63mm front fitting for all 4 spoke type plus 6x13 RFX. #REV06 55mm for RFX 5 spoke 12 only. # REV07
11. Valve Caps
Cooper emblem set of four. # MSA1123
12. Valve Caps
Blue alloy # MTC6, Red alloy # MTC5, Gold alloy # MTC4, Silver alloy # MTC3
13. Decals
Mini Cooper 50mm wheel decal #sticker21 Minilife 50mm wheel decal #sticker26.
Mini Mania
13
13-5
Tires 2
1
5
6
3
4
7 8
9
12
13-6
10
11
13
www.MiniMania.com e-mail
[email protected] 800-946-2642 Tech: 408-942-5595
NO. PART NO.
DESCRIPTION
1.
TYRE09
Colway MS Knobby 165x10. Good for muddy stages, grass tracking or wintry snow conditions, soft wall.
2.
TYRE07
Falken 165x70x10 (OHTSU from Japan)
3.
TYRE01
Falken 165x60x12
4.
TYRE15
Yokohama AO32-R, 165x70x10. Aqua tusk tread design to increase traction in the wet. This simetric tread pattern and advanced high grip tread compound improves braking and cornering performance.
5.
TYRE02
Yokohama A008 175x50x13. High performance, competition grade tire with asymmetric tread pattern.
6.
TYRE091
Yokohama A510, 165x60x12. Unique tread pattern, great for wet or dry. Improved cornering and tread life.
7.
TYRE08
Yokohama A008, 165x70x10. The Aoo8 specification is every serious Mini ownerss favorite 10 tire.
8.
205/50-10
Low profile Titan tire. An inch lower and an inch and a half wider than anything weve had before with deep aggressive tread!
9.
HOOSIER-10
165/70-10 RACE TIRES This is the tire to beat in vintage racing or autocrossing when slicks are not appropriate. They are 165/70 (bias ply) in size, but when mounted on a wheel look much wider.
TIRES
10. PIRELLI/12
Pirelli P3000, 145x70x12 tire.
11. TIRE12
Nankang 145/70-12 tire.
12. TIRE03
OHTSU 165/70-10 tires. These Japanese-made steel belted radial Ohtsu tires are made to last. 4.5" minimum wheel width is necessary to run 165 tires.
13. FALKEN/12
Falken tire 165/60-12
13
Mini Mania
13-7
Wheel Spacers and Locknuts
1 2
3
4 9 7 5
8
6
Bonnet 3
2
1
Body Accessories 4 6a
4a
13-8
5
6
www.MiniMania.com e-mail
[email protected] 800-946-2642 Tech: 408-942-5595
WHEELS SPACERS & LUGS 1.
CW16
Pair of wheel spacers with studs 1 (25mm wide).
2.
CW15
Pair of wheel spacers with studs 3/4 (19mm wide).
3.
CW1
Pair of wheel spacers with studs 3/8 (10mm wide).
4a. SR4
Pair of wheel spacer shims (5mm wide).
b. SR3
Pair of wheel spacer shims (3mm wide).
5.
Wheel stud length starts from shoulder to end, not end to end. 2112064 21A2064L NAM5645 21A1278 ENJO-1039 ENJO-1040
Stud Stud Stud Stud Stud Stud
6.
LOCKNUT LOCKNUT LOCKNUT LOCKNUT LOCKNUT LOCKNUT
4 4 4 4 4 4
7.
CN1
1 2 3 4 5 6
CN1A CN4 CN2 CN5 8.
C-21A1969 CN3 REV09
length length length length length length
locking locking locking locking locking locking
35mm 50mm 32mm 55mm 58mm 78mm
with with with with with with
thread thread thread thread thread thread
length length length length length length
22mm. 29mm. 23mm. 20mm. 19mm. 27mm.
nuts for latest Mini/Cooper 8 spoke Alloy. nuts for Mamba/Revo 10 wheels. nuts for Minilife/Original Minilite wheel pre 1980. nuts for 13 RFX/Phoenix/Superlite large radius seat CN5 nut. nuts, Mini steel - 84 on, Wella CN2-type. nuts, Mini steel - pre 1984. GB alloys CN1/2 type.
#6 Chrome long nut, equiv. type fitted to Mini steel whls to 1984, round radius bottom. #6 Chrome short nut, equiv. to CN1 above. Lrg. seat # 6 Chrome long nut for round seat per steel wheel pre 84. Can be used for CN1 if reqd. #5 Chrome long nut, equiv. to type fitted to all steel whls. from 84, 60 degree angle bottom. Fits Wella and Minator. Large seat #5 Chrome long nut fits Superlite, Revo RFX 6x13 or any whls. w/ 60 degree deep seat for nut. Sleeve nut and chamfered washer in stainless steel for Minilife. Chrome sleeve nut and flat washer for Wolfrace/Slot Mag/Old Minilite. Sleeve nut in stainless steel for Mamba/Revolution with washer.
BONNET and BODY ACCESSORIES 1.
MSSK019
Quick release bonnet hinges for standard metal bonnet. Pair of mk3 bonnet hinges made for removing the whole bonnet for engine work.
2.
GS130273
Internal realease bonnet lock. The kit includes a new catch with bolts, correct length cable and bracket to fit at the end of the parcel shelf. (not clubman)
3.
MSSK018
Spring loaded bracket bolts to original hinge as safe auxillary bonnet prop.
4. 4a.
RS17 RS18
Front plastic spoiler for Mini, about 6.5 deep. Front plastic spoiler for Mini Clubman, about 6.5 deep.
5.
EBF100150
Plastic boot load liner sturdy, lightweight and easily removable. Tailor made for cars from 1974 on with larger 7.5 gallon petrol tanks.
6 . MSA1118 6a. MSA1119
Antenna. Wing mounting telescopic aerial, budget replacement Antenna. Roof aerial for the 60s look
Mini Mania
13
13-9
Doors and Fittings 1
2
27
3 11
4
7
5 6
10
8 9
20
12
13
14
21
15
16 22 24
18 19
23
17 25
26
13-10
www.MiniMania.com e-mail
[email protected] 800-946-2642 Tech: 408-942-5595
WHEELS SPACERS & LUGS 1. 2.
14A7176 14A7177
R/H door pocket alloy kick plate L/H door pocket alloy kick plate
3. 4. 5. 6.
14E4289 14E4290 ALE1221 14E4291
Red door check strap. Grey door check strap. Black door check strap. Green door check strap.
7. 8. 9. 10.
14A6745 14A764 14A6744 SG604073
Check strap bracket on body, two per car. Strap retainer, recessed screw holes, four per car. Door pocket stiffener plate, two per car. Check strap screws, 8 per car less nuts.
11. EAM8530 EAM8530
R/H vertical draught excluder between sliding door glass. L/H vertical draught excluder between sliding door glass.
12. 14A6833 13. 14A6835
Nylon dove tail guide for door. Retainer guide plate for dovetail on door frame.
14. 24A1194 24A1195 15. 24A1196 . 24A1197
Front window plastic catch R/H. Front window plastic catch L/H. Rear window plastic catch R/H. Rear window plastic catch L/H.
16. 17. 18. 19. 20.
Sealing gasket for window catch. Chrome boss to fix catch to window Correct size fibre for chrome boss. Chrome headed screw for boss Complete car set of 4 catches and ancillaries.
24A1198 14A8151 14A7065B RMP307 MSSK015
21. 14A9773 for R/H 14A9774 for L/H 22. 24A341 for R/H 24A342 for L/H
Upper window moulding as per original Cooper and S mk 1/2 in stainless steel for sliding windows only. Lower window moulding as per original Cooper and S mk 1/2 in stainless steel for sliding windows only.
23. EJU10003
Interior moulding and seal for all wind up window models, either side.
24. CZH1666 CZH1667 25. PAM1014 PAM1015 26. BG5401
for for for for
R/H Outer door moulding and seal for wind up windows 1970 on as original on L/H Cooper S and Mk3 upto the introduction of black protective end caps. R/H With protective black ends from 1981 on, outer window moulding with seal. L/H clips are ADH3809 5 required. Original 1960s accessory metal door stay kit.
27. 14A6818K(pair) Set of four hinges, bare (zinc alloy with stainless steel fittings for all Minis with external hinges. 14A6818 Upper R/H hinge 14A6819 Upper L/H hinge 14A6820 Lower R/H hinge 14A6821 Lower L/H hinge BMP135 Gasket for hinges to A panel ALA7844 Gasket for hinges to door
13
Mini Mania
13-11
Handles and Winders 7 10
3 9
1 6
5
2
8
4
14
15 19
17
16
18
21
20
23
22
25
26
24
13-12
www.MiniMania.com e-mail
[email protected] 800-946-2642 Tech: 408-942-5595
DOOR WINDERS 1. 2. 3.
MSA1130 MSA1131 MSA1132
Polished alloy window winder handle Polished alloy door open handle Polished alloy door pull/grab handle
4.
MSA1133
Stainless steel bezel for door catch.
5. 6. 7.
MSA508GOLD MSA509GOLD MSA510GOLD
Anodised gold alloy window winder. Anodised gold alloy door open handle. Anodised gold alloy door pull/grab handle.
8 . MSA508 9 . MSA509 10. MSA510
Anodised silver alloy window winder. Anodised silver alloy door handle. Anodised silver alloy door pull/ grab handle.
11. MSA1130C 12. MSA1131C 13. MSA1132C
Carbon fiber window winder handle. Carbon fiber door open handle. Carbon fiber door pull/ grab handle.
CHROME LOCKS AND HANDLES 14. BONNETLOCK 15. 8B12500
key operated that fixes to the grille where release is located. Door scoops, only for roll up window type doors, pair.
16. 8B12499 17. G282 18. G283
Scoop aith Monte Carlo Rally emblem etched on. Chrome plated metal window winder handle sold individually. Chrome plated metal door opening handle, sold individually.
19. CZH1785 for 3pc kit, CZH886 for R/H handle and key, CZH887 for L/H handle and key. Outer Chrome door handles from 1970 on. All matching barrells and keys. 20. JRC2844 21. BARREL-SET
Rear boot handle as fitted from 1970, with barrel and key. Set of three matching barrels and keys.
DOOR HANDLES 22. MSA1142
Pair of door opening handles.
23. MSA1141
Pair of window winder handles.
24. MSA1140
Pair of door arm rests.
25. MSA1144
Stainless steel/chrome interior mirror.
26. MSA1143
Extension clip that fits on rocker switches for lights only.
13
Mini Mania
13-13
Mirrors and Bumpers
3
2
4
1a 6 8
7
15 9
5
11
14 13
12
16
13-14
www.MiniMania.com e-mail
[email protected] 800-946-2642 Tech: 408-942-5595
MIRRORS AND BUMPERS 1 2. 3. a. b. c. 4. a. b. c. 5. a. b. 6. a. b. 7. 8. 9. 11. 12. 13. 14. 15. 16. 17.
GAM105 Classic shape chrome torpedo mirror with flat glass for wing fitment. (a) GAM105C Classic shape chrome torpedo mirror with convex glass for wing fitment. (Convex glass makes objects appear smaller and farther away.) GAM106 Alloy torpedo mirror with flat glass for wing fitment. Polished right hand door mirror complete with base and fitting. GAM215A R/H mirror with flat glass, stainless steel body. GAM217A R/H mirror will convex glass, stainless steel body. M688990E R/H mirror with flat glass, metal black body. Polished left hand door mirror complete with base and fitting. CAM216A L/H mirror with flat glass, stainless steel body. GAM218A L/H mirror with convex glass, stainless steel body. M688991E L/H mirror with flat glass, metal black body. Original Tex round chrome mirror as used in the 1960's. 8G8731 Round chrome mirror with convex glass. 8G8710 Round chrome mirror with flat glass. Original Tex classic alternative oval shape to the round mirror in the 1960's. M50201 Classic shape chrome mirror with flat glass. M50211 Classic shape chrome mirror with flat glass. M16007 Tex chrome short straight arm. N16008 Tex chrome angled arm. M16009 Tex chrome curved arm. 670 Headlamp Eyebrows, Chrome JPC9848 Plastic door mirrors as fitted from 1980 on r/h. l/h-JPC9849 DMC92140 Plastic covers in carbon fiber weave look, to glue onto mirrors. CRB10184NAL Rover white painted mirror as fitted on coopers 1994 on. l/h-CRB10185NAL. DMC92141 White plastic covers to glue onto original plastic mirrors to create the Cooper look. MSA1144 Stainless steel/chrome interior mirror. MS25 Original kit complete with bumpers, corner bars, overiders and all fittings. KIT Front and rear kits of overider and corner bars, but less bumpers where purchasers wish to drill their own stainless steel bumpers. Reverse lamps fitted from 1983 on will have to be relocated using bracket MSSK024. (a) For cars pre 1997 or late coopers with 2 spot lamps only-MSSK025. (b) Cars with 4 spot lamps or 1997 on, a different front kit is used with original rear kit-MSSK026. (c) A front kit only for cars with 4 spot lamps or 1997 on. Has shorter corner bars.-MSSK027.
18.
BUMPER
Stainless steel bumper with holes for corner bars can be ordered individually-14A9871. (a) Genuine Rover stainless steel bumper without holes-DPB10166. (b) Budget chrome bumper-14A6779MS. (c) Budget stainless steel bumper-DPB10165MS.
19.
OVERIDER
Stainless steel overider with hole for right hand front or left hand rear-14A9923. (a) Stainless steel overider with hole for left hand front and right hand rear-14A9924. (b) Plain stainless steel overider for mkII without holes-14A8738.
20.
CORNER BAR
Right hand front corner bar stainless steel- 14A9877 (a) Left hand front corner bar stainless steel14A9878. (b) Right hand rear corner bar stainless steel- 14A9919. (c) Left hand rear corner bar stainless steel-14A9920.
21.
KIT
Fitting kit for mkI corner bars and overiders-MSSK010. Fitting kit for mkII overiders only-MSSK011.
13
Mini Mania
13-15
MINI FLARES, SPOILERS, ETC.
1
2
3 4
5 6
7
8
13-16
www.MiniMania.com e-mail
[email protected] 800-946-2642 Tech: 408-942-5595
Flares
DESCRIPTION
1.
MS131
EURO ARCH IN FIBERGLASS - This arch sticks out approximately 2.750" and enables bodyline (wheel arch & moulding lip) to be cut or modified to allow fitment of large wheels, ie:13" and is attached by screws from back of wing, (hence no visible screws). Fiberglass arch extends beyond bumper seam line at rear.
2.
MS128
GROUP 5 ARCH IN FIBERGLASS - This arch kit sticks out 3" and is used when body line is cut away or retained. Originally as a group 5 arch it was made for cars with no modifications but has become a cheap jack of all tradesespecially when large odd size wheels are used. Rear arches stop at bumper seam line. Widest part at front approximately 5".
3.
MS132
MINI SPECIAL ARCH 1" WIDER IN FIBERGLASS - This arch kit sticks out 2.750" when bodylines (wheel arch & moulding lip) are as original. The arch is similar to the plastic type fitted by Rover but is 1 wider. Fiberglass arch extends beyond bumper seam line. (not illustrated)
4.
C-AJJ3316
GROUP 2 IN FIBERGLASS - This arch kit sticks out 1.75", including lip, when bodylines (wheel arch and moulding lip) are kept original. Screws are visible and the chrome wheel arch moulding can be retained. These are copies of original ST Abingdon works arches. Rear arches stop at bumper seam line.
5.
C206
ALLOY ARCHES - This arch kit sticks out 1.75", including lip, when body lines (wheel arch & moulding lip) are kept original. Screws are visible as per securing lip and plastic wheel arch moulding can be retained. Rear arch slope at bumper seam line. Often used by Vintage/Historic racers overseas or foundation to blend and build on fiberglass arches.
6.
C-STN71
WORKS GROUP 5 ARCH IN FIBERGLASS - This arch kit sticks out 2.5", including lip, when bodylines (wheel arch & moulding lip) are kept original. Screws are visible and plastic wheel arch moulding can be retained. Rear arch stops at bumper seam line. These are original ST works car copies.
7.
MS133
WP ARCH IN FIBERGLASS - This arch kit sticks out 2.25" maximum when bodyline(wheel arch & moulding lip) are kept original. Screws are not visible. Front arches taper away at front exposing tire tread. Rear arches stop at bumper seam line. Has correct body to arch rubber seal included.
8.
GAW117
PLASTIC ARCH known as MINI SPECIAL ARCHES - (includes moulding between arches) This arch kit sticks out 1.750" when bodyline (wheel arch & moulding seam) are kept original. Originally fitted to Innocenti Minis become standard equipment on all Minis from 1984. Arches available separately. Screws are visible and rear arch extends beyond bumper seam line. (not shown)
13
Mini Mania
13-17
MINI FLARES, SPOILERS, ETC. 15
9
14
16 11
10
17
18
19 20
13-18
www.MiniMania.com e-mail
[email protected] 800-946-2642 Tech: 408-942-5595
F lares
DESCRIPTION
9.
GROUP 5 EXTRA WIDE - This arch kit sticks out a nominal 3.5" and more when positioned at the angle most racers use as shown. 5.5" wide at very front. Definitely only for cars with bodyline modifications and fairly inexpensive to replace. Rear arches stop at bumper seam line. (not shown)
MS128W
10. SK200
Black ABS plastic styling kit includes front, rear spoilers and wheel arch extensions with still trims built in. Has full fitting instructions and parts required. Can be painted using two pack acrylic paint. Has a cut out in the rear valance for a fog lamp which was fitted from 1982.
11. FR200 12. FR201
Roof spoiler to compliment kit in ABS plastic from same manufacturer as SK200. (not shown) Boot spoiler from same manufacturer again to completely dress up your car. Black ABS plastic. (not shown)
14. 15.
Set of 4 stainless steel covers to fit over the original plastic arches as fitted by Rover since 1984. Set of 2 stainless steel strips to fit on the body edge.
BG2405MS BG2046MS
16. MS136
Latest mini arches in fiberglass sticks out 3 1/2 and bodyline is cut away. Available in fiberglass as kit MS136, or as fitted by rover in rubber from 1996 on. R/H/F Arch- DFJ100240LML, L/H/F ArchDFJ100250LML, R/H/R Arch- DFJ100460LML, L/H/R Arch DFJ100470LML.
17. MS129
Superflares- Front 4 Rear 4 1/2
18. MS130-NASA
Superflares- Front 4-5 Rear half body side 5 1/8-6
19. SK202
Exact replica of the ERA body kit (shown here on a convertable) with vented front spoiler for cooling. Body modifications will be required. Recommended use with 13 wheels. Molds into bodywork unlike ERA, but could be adapted to fit with sealing rubber between body and arch kit.
20. SK203
Replica of the Lamme body kit as fitted to the Rover Cabriolet(shown here on a standard mini). Body modifications will be required. Recommended use with 13 wheels. Has slightly softer bodylines than the ERA replica kit. Molds into bodywork and fitting instructions are included.
13
Mini Mania
13-19
ROLL CAGES AND MOLDINGS
1
2
5
4 3
10
6
13-20
7
9
8
www.MiniMania.com e-mail
[email protected] 800-946-2642 Tech: 408-942-5595
ROLL CAGES
DESCRIPTION
a. b. c. d. e.
Front cage Rear Cage no diagonal Rear fixed diagonal Rear Cage removable diagonal Door bar single
C-STR237SD C-STR247SD C-STR248SD C-STR249SD C-STR238SD
Fiberglass
DESCRIPTION
1.
MS101
Two piece fiberglass front end with detachable bonnet. Often used for race or road cars. Brace bars are required for all front ends to retain rigidity.
2.
MS104
Round fronted mini, one piece full front end without any cut outs. Budget specifications. MS103clubman type square front.
3. 3a.
MS106 MS106C
Pair of brace bars which bolt to front subframe . For rounded front mini shape For square fronted clubman shape.
4. 4a. 4b.
MS114 MS114 MS115
Budget quality bonnet skin without lip as per mkI Minis and Vans. No fixings. Budget quality bonnet skin with lip for molding. Clubman budget bonnet skin.
5.
MS110
5a. 5b. 5c.
MS111 MS112 MS113
Bootlid double skins or outerskins are unable to be fitted using original fixings. Available in mkI or mkIII design. Bootlid outer skin only mkI- MS110 Bootlid outer skin only mkIII. Bootlid inner and outer skin mkI. Bootlid inner and outer skin mkIII.
6.
MS109
Minivan/Estate one piece rear fiberghlass door with window and seal fitted.
7.
MS139
Boot well to take hollow out of subframe floor, for better aerodynamics on race cars.
8.
MS138
Battery box and small lid, with large lid inside car-MS137
9.
MS140
Liners to cover inside of doors, done showing weave of carbon fiber.
10.
MS141
Rear 1/4 liners, done showing weave in carbon fiber.
11.
MS105
Carbon fiber doors, wind up window type.
13
Mini Mania
13-21
Grilles 1
7
2
8
11 9
10 12
3
13
14
15 5
13-22
4
16
www.MiniMania.com e-mail
[email protected] 800-946-2642 Tech: 408-942-5595
GRILLES
DESCRIPTION
1.
24A2158
Stainless steel Morris Cooper grille. Full top slat internal bonnet release- 24A2159.
2.
8B12506
Stainless steel grille with 6 lamp hole recess.
3.
DHB10150PME
Genuine Rover black grille. Mini Spares black grille- CZH4015MS
4.
DHB10150MMM
Genuine Rover chrome grille. Mini Spares alloy chrome grill- ALA6654MS.
5.
Buttons
Red alloy-MS97, Blue alloy-MS97B, Black -MS98, Chrome-MS99, Lightweight aluminum-MS100.
6.
60s grille
1960s wavy grille as original per used on the mini mkI has been introduced for later cars 70s on. If fitting to a car with an internal cable operated bonnet release- 8B12508, Witha finger recessed top slat for manual opening-8B12507.
7.
8B12503
Stainless steel grille with 6 lamp hole when an internal bonnet release is fitted.
8.
8B12502
Stainless steel grille with 6 lamp hole for manual bonnet release.
9.
24A198
Grille as fitted to austin mkI cooper and s.
10.
14A7299
Grille as fitted to austin mkI mini, known as the wavy line grille because of its shape.
11.
ALA6669
Bright trim alloy as original where internal bonnet release is used. Stainless steel heavy duty front grille where internal bonnet release is used- 8B12505.
12. ALA6668
Genuine alloy grille, maual opening for original mkII and S. Stainless steel heavy duty front grille when bonnet is opened manually-8B12504.
13. ALA6508
R/H grille molding 1967 mkII on. L/H grille molding 1967 mkII on-ALA6509.
14.
ALA6559
Grille top molding 1967 on.
15.
14A7781
Grille moustache molding as fitted to mkI mini pre 1967.
16.
14A7781
R/H end m,olding for mkI moustache. L/H end molding for mkI moustache- 14A7783.
Moustache clips are ADA3583 in stainless steel and pop rivet for the clip RA608076. 3 required per molding.
13
Mini Mania
13-23
Dress up Parts
1 2
12
3
4 6
13
7
5
11 8
10
9
16
14
15
21
20 17 18 17 19 18
13-24
www.MiniMania.com e-mail
[email protected] 800-946-2642 Tech: 408-942-5595
DRESS UP PARTS
DESCRIPTION
1.
GWB219
Stainless steel bayonet fitting wiper blades.
2.
13H5626
Stainless steel bayonet type wiper arm that park on the right hand side, as per all mkI/II to 1970. Also fits left hand drive mkIII minis 1970 on.
3.
13H5629
Stainless steel bayonet type wiper arm that park on the left hand side, as per all mkIII from 1970 on. LHD mkI/II minis to 1970.
4.
37H7738
Eight sided chrome nut that fit the wiper arm slide on to. This is for the 32 tooth wheel box fitted from 1970. supplied individually.
5.
37H6316
Six sided chrome nut, fits wiper wheel box, that the wiper arm slides on to. This is for the 22 tooth wheel fitted to mkI/II minis.
6.
37H6042C
Chrome plated plastic wheel box plinths to replace those dowdy black ones. Comes with a sealing washer to compliment the wiper arms and blades. Two types are available, complete with nuts. Sold in pairs. (a)Plynth and the six sided nut fitted to mkI/II-37H6042C. (b) Plynth and the eight sided nut as fitted to mkIII from 1970 on.
7.
GWW102
Mechanical push button windscreen washer pump as used on Minis and MG/Sprites.
8.
GWW801
Chrome twin washer jet with nut fixings.
9.
JETS
(a)Black plastic jet with two holes for maximum cleaning. 1- nut fixing ideal for mkI/II- MS389. Push fit as used from 1970 on.-GWW812. (b) Single hole 1- Round locating hole, push fit 1980GWW804, 2- D shaped locating hole , push fit 1980 on- GWW1080.
10.
GWW810
Chrome jet with nut fixing.
11.
8B12396
Stainless steel wiper arm hole plug. Theif proof, correct dome shapel.
12. NB4
Original wood and picket black nylon coated rear nudge bar.
13. NB3
Original wood and picket black nylon coated front nudge bar.
14.
NB2
Original wood and picket stainless steel rear nudge bar.
15.
NB1
Original wood and picket stainless steel front nudge bar.
16.
14A7270
Stainless steel polka dot pattern kick plates.
17.
EBN100010
Set of doorstep sill guards in black plastic with satinless steel insert depicting Mini.
18.
EBN100040
Set of doorstep sill guards as per 17 but with latest winged motif.
19.
14A7271
Set of stainless steel plain sill guards. (a) stainless steel etched mini cooper text and chequered pattern. (b) 14A7273 stainless steel etched mini text and chequered pattern.
20.
Seams
Front pair of seams- 8B12400. Rear pair of seams- 8B12401. In plain metal, front-BMP127MS, rear r/h-BMP124MS, rear l/h-BMP125MS.
21.
plastic trim
Roll of specially shaped trim for one roof chrome- MT632, black- MT633.
13
Mini Mania
13-25
Petrol Tanks and Caps
5d
1 4a
2
6
4b
5a
2
5b
3
8 9 11 7
2
10
3
1
12 5
5
4
13-26
www.MiniMania.com e-mail
[email protected] 800-946-2642 Tech: 408-942-5595
PETROL TANKS AND CAPS
DESCRIPTION
1.
21A2183
Cooper S right hand tanks 5.5 gallon fits any mini. (a) carburettor type 21A2183. 9b) fuel injected type- 21A2184 (c) standard left hand tank 7.5 gallon- ARP1043.
2.
MS82
(a) whole kit of fitting parts for original tanks- MS83. All parts except with extra parts for fuel injected parts. MS83.
3.
MSA1126
Dummy neck with special rubber seal.
PETROL CAPS A rang of 1960s look petrol caps. These are available in chrome or alloy and as a locking cap in alloy. The brass ring that fits onto the petrol tank neck is only required with the non-locking type and is included with the cap. The brass ring is available as a separate spare part. 4. a. b. c. d. 5.a b. c. d. 6.
The flat type with the large catch is known as the Aston and the Monza has the raised ridge on top. ASTON Aston chrome cap with fitting ring. ASTON01 Aston alloy cap with fitting ring. ASTON02 Aston alloy locking cap. ASTON03 Aston chrome locking cap. MONZA Monza chrome cap with fitting ring. MONZA01 Monza alloy cap with fitting ring. MONZA02 Monza alloy locking cap. MONZA03 Monza chrome locking cap. COL25 Separate Brass Collar.
7.
WLD100310
Chrome petrol locking cap for saloons 70 on.(a) chrome petrol locking cap vented pre 1970 and all van/estates- GSS154A.
8.
GSS212A
Black petrol locking cap (non vented) for saloons 1970 on..
9.
WLD100350
Chrome petrol cap vented.
10.
WLD10027
Black petrol cap non vented.
11.
MSA1146
Petrol drip guards in various colors.
12. MSA1145
The classic petrol cap fits onto filler neck, and allows locking cap to be underneath.
CARBURETOR DASHPOTS & STUBSTACKS 1. R23RED HS4 11/2" SU Red anodized cover R23BLUE HS4 11/2" SU Blue anodized cover R23 HS4 11/2" SU Polished cover 2. R24RED HIF6/38/44SU Red anodized cover R24BLUE HIF/6/38/44 SU Blue anodized cover R24 HIF6/38/44 SU Ploished cover 3. R22RED HS2 11/4" SU Red anodized cover R22BLUE HS2 11/4" SU Blue anodized cover R22 HS2 11/4" SU Polished cover 4. Substack increases air flow when used in conjunction with K&N filter. K&N Substack for HS2 11/4" filter SS50 HS4 11/2" filter SS51 HS6 13/4" filter SS52 HIF6/44 filter SS53 5. MIni Spares own Stubstacks. Greatly increased airflow into carburettor, for performance engines. C-AHT245 Carb stubstacks for HS2 short C-AHT246 Carb stubstacks for HS2 long C-AHT247 Carb stubstacks for H4/HS4 short C-AHT248 Carb stubstacks for H4/HS4 long The HS2 Mini Spares short stubstacks will fit K&N pancake filters.
Mini Mania
13
13-27
Gauges 4
1
2
3 8 9
10
11
13
6
5
7
12
33
28
32 29
31
34
30
27
14
19
26
13-28
www.MiniMania.com e-mail
[email protected] 800-946-2642 Tech: 408-942-5595
GUAGES
DESCRIPTION
1.
ADU2341
2. 3. 4.
134H4442 13H4444 24A2702
5.
S1B120
6. 7. 8.
S1B122 S1B800 S1B220
9. 10. 11. 12.
S1B521 S1B110 S1B420 S1B422
Speedo 90mph with 3.4 final drive, 140kph with 3.4 final drive- ADU2343, 90mph, with 3.76 finla drive -ADU2345. Speedo 130 mph with 3.4 final drive. Speedo 200kph with 3.4 final drive. Original black Cooper S speedo housing. (a) oval beading-14A9907, Temp guage, in black13H4460, magnolia -13H4460MG. 0-80x100 80mm wide electronic impulse tachometer with chrome bezel and full wiring diagrams, magnolia S1B 120MG. 0-1000x100 80mm distributor/coil sensed tachometer, magnolia-S1B122MG. POD for 80mm tachometer black, in chrome-S1B801. Voltmeter/Ammeter in nlack, in magnolia-S1B220MG, (a) Ammeter with 60-60 scale-S1B320, in magnolia-S1B320MG. Oil pressure guage 0-100lb/in with connecting pipe for mechanical fittings, for magnolia-S1B521MG Electronic clock, in magnolia-S1B110MG Oil temperature guage mechanical fitting, in magnolia S1B420MG. Water temp 30-110 degrees centigrade with 66 capillary mechanical fittings. In magnolia-S1B422MG. Dual oil pressure/water temp guage with all fittings, in magnolia-S1B130MG
13. S1B130 14. 15. 16. 17. 18.
TIM004 TIM005 TIM006 TIM007 TIM008
19.
TIM011
20.
TIM014
21. 22. 23. 24. 25.
TIM023 TIM034 TIM039 TIM002 LMA017
26.
Stewart Warner
a. water temp 40-110 centigrade-SWG505, b. oil pressure 0-100lbs scale- SWG506, c. oil temp 40150 centigrade-SWG509, d. Tachometer 0-100x100 80 mm-SWG511, e. Tachometer 0-100x100 stainless steel 80 mm-SWG511ST, f. turbo boost plus/minus 30 psi- SWG527.
27.
C-STR1058
80mm mechanical tachometer kit. Driven directly from the end of the camshaft. The most accurate way of counting rpm. Does not get interferred from other signals. 0-10,000 rpm. comes with tacometer, 48 drive cable, mounting boss, special Oldham coupling, cam nut, and relevent screws.
28. 29. 30. 31.
OL OAA OA TP
Five foot plastic oil pipe. Angled oil pipe adaptor for fitting in confined spaces to eradicate damaging oil pipe. Oil guage adaptor for fitting into block or T piece. T piece for fitting to block enabling oil gauge and switch to be used tgether.
32.
HPSI
Oil pressure switch that triggers off when oil press. drops below 22lbs. oil pressure ajustable switch that activates between 15-60lb as required-HPS3. Standard replacement oil switch that activates at about 7-10lbs-GPS133.
33.
DP1
Magnetic sump plug with extension to collect all magnetic debris in the gearbox.
34.
TE5
Temperature guage adapter for fitting cylinder head or thermostat housing with take off. Already supplied with TIM guages, but useful for SMITHS and other makes.
35. TIM021
Ammeter guage with 60-60 amps grading for use with alternator only. 6 or 12 volt neg or positive. Water temp guage with 40-120 degre centigrade calibration. with 57 capilary metal tube. Oil pressure guage 0-100 lbs calibration, copper pipeline and T piece fitting. Battery voltometer guage, warns you of electrical or charging defects. low battery condition. Vacuum performance guage, mechanical movements and colored segments indicating performance with 0-30 ins/hg scale. Tachometer with 0-80 RMPx100 scale 80mm (3&1/8) diameter pod mounted for fitting under dash. Easy to fit suitable for 4, 6, 8 cylinder with negative earth for petrol engines only. Tachometer 0-8 RMPx1000 scale. 52mm diameter. Easy to fit suitable for 4, 6, 8 cylinder with negative earth for petrol engines only. Chrome bezel to fit all 52mm guages only. Electrically operated temp guages with 0-12 centigrade scale, for neg earth only. A dash mounting pod to hold any 52mm guage. Time clock with second hand. Quartz mechanism, negative earth only. Adaptor for oil guage if a plastic guage hose i preferred to original metal type.
Chrome 52 with single hole. Chrome with two holes-TIM022.
Mini Mania
13
13-29
Dashes 4
1
6
10 2
3
9 8
5
7
13
15
17
11 12
18
13-30
19
20
21
22
www.MiniMania.com e-mail
[email protected] 800-946-2642 Tech: 408-942-5595
DASHES
DESCRIPTION
1.
C-AJJ3330
Dash for right hand drive cars, 3 piece. LHD-C-AJJ3331
2.
C-AJJ3331
Navigators door switch panel rhd. LHD-C-AJJ3333.
3.
Fuse
4 bank fuse holder mounted under dash- C-JJ3334, 2 bank under dash-C-AJJ3335, 3 bank under dash-C-AJJ3336.
4.
Wooden
Wooden dashes are available in Burr walnut or charcoal grey with 2 or 3 clock holes and rhd or lhd. The 3 clock versions are also available with 3 extra guage holes above the radio blanking cover. 2 block Burr dash rhd-DASH003, 2 block burr dash lhd-DASH004, 2 clock charcoal grey dark dash rhd-DASH005, 3+3 extra clock burr walnut dash rhd-DASH006, 3 clock burr walnut dash lhd-DASH007, 3+3 extra clock burr walnut dash lhd-DASH008, 3 clock charcoal grey dash rhd-DASH009, 3+3 extra clock charcoal grey dash rhd-DASH010, 3 clock charcoal grey dash lhd-DASH011, 3+3 extra clock charcoal grey dash lhd-DASH012.
5.
MSA0191
Door and rear side window cappings in Burr walnut. Sold as a set of four only, for grey MSA0200.
6.
MSA0192
Door pull handles in burr walnut finish, sold as pairs, for grey-MSA0201.
7.
MSA0193
Door opening handles in burr walnut, sold as a set of two, for grey-MSA0202.
8.
MSA0194
Door window winder handle in burr walnut, as a pair, in grey-MSA0203.
9.
MSA0195
Handbrake grip in burr walnut, in grey-MSA0204.
10.
MSA0196
Gearlever knob in burr walnut, in grey-MSA0205.
11.
YSP024
Wooden 4 rockers switch and heater and choke surround in burr walnut, in grey-YSP024GREY, rocker in burr walnut-YSP025, in grey-YSP025GREY.
12. YSP026
For fuel injected models 5 switches surround in burr walnut, in grey-YSP026GREY, 4 switches in burr walnut-YSP027.
13. VISTADASH
Plastic dash made for vehicles without air vents, has hole for toggle type switches .
14.
DASH001
Dash with central speedo hole and 2 guages per original Coopers made to only fit with wide top dash pads as fitted to all late cars, burr dash. In charcoal grey-DASH002
15.
DASH015
Stainless steel dash. Made as per original wooden dash. Dark wooden charcoal grey around guages, only available in rhd. 2 clock-DASH015, 3 clock-DASH018, 3+3 extra clock-DASH018.
16.
MSA0180
Door and rear side window cappings in charcoal finish with stainless steel inserts, sold as four.
17.
MSA0210
Set of two chrome air vent covers. These will enhance any dash board and can be used on either dash
18. 19. 20. 21.
21A 1204 21A 1202 14A 9988 CHM 373
22.
21A 2329
Original early locking choke cable- when twin carbs. Original early mini choke cable. Original early heater control cable. Original rubber/ plastic knob heater control cable 1968-1988, (a) rubber/ plastic knob heater control cable from 1998 when plastic heater valve isfitted-JFF 10003 Rubber/plastic twist to lock choke cable.Rubber/plastic ratchet type locking choke cable-SBF 10027. As above but 31 long for 1300cc onwards- C-AHT 85. Special accelerator cable-anti friction, nylon inner sleeve, longer for webers and modified cars. Complete kit the lever mechanism moving on a plastic base will eradicate any of the following problems: Broken on/off switch, control knob missing, looks tatty and rattles, hard to operate. Colored dial kits, available in silver,blue,yellow,green,white,magnolia,and red.
23. 21A C-AHT 85 24. BAU1924 25. DASH0100
13
Mini Mania
13-31
Mats and Trims 2 1 3
5
4 6
7
8 9
10
13-32
www.MiniMania.com e-mail
[email protected] 800-946-2642 Tech: 408-942-5595
MATS AND TRIMS
DESCRIPTION
1.
CARPET13
Mini cooper emblem
2.
CARPET12
Mini emblem
3.
CARPET11
Mini Spares Logo emblem.
4.
EAH104380
Rovers tailored front reversible rubber mats, with mini logo embossed.
5.
GAC181
Square rubber mats for the rear.
6.
CAT10044
Mudflap with mini cooper laurelemblem.
7.
GAC164
With the word mini emblem.
8.
CAT100870
With the latest mini logo emblem.
9.
CZH798
Bulkhead fire wall sound deadening piece for mk3 cars 1970 onwards.
10.
24A280
Bulkhead fire wall sound deadening piece for mkI/II cars.
11.
47H9615
Bonnet insulation kit, includes four segments to fit in between stiffener supports.
12. Soundproof
Complete soundproofing kits to enjoy reduction of road and engine noise on early cars where little sound deadining material was fitted. MkI/II minis except cooper-MS90, mk3 saloon 1970 onwards- MS91, Coopers and Cooper S mkI/II-MS92, clubman saloon-MS93, clubman estateMS94, soundproofingkit mini traveller-MS95, Soundproofing kit mini van-MS95M, roll of fire retardent felt-FELT, Tub of adhesive- FELT 860.
13
Mini Mania
13-33
Knobs and Pedals 5
6
7
2 3
1
8 8 8
8 8
c
b a
d
f
g
e
18
17
19
h
13
13-34
14
15
16
www.MiniMania.com e-mail
[email protected] 800-946-2642 Tech: 408-942-5595
KNOBS AND PEDALS DESCRIPTION 1.
MSA0196
Burr walnut gear level knob with the latest mini emblem.
2.
BG8110
Round alloy gear lever knob.
3.
BG8114
Round alloy gear knob with recess to fit emblem.
4.
BG2802
Wood and picket emblem, leather gear lever.
5.
MCC300
Cooper alloy gear lever knob.
6.
22G110
Original mini gear lever knob pre 1973.
7.
BG2602
Wood gear lever knob, without motif placing.
8.
BG2702
Leather gear lever knob, without motif placing.
9.
Stickers
Stick on emblems for recessed gear knobs. Cooper S-MSA2002, Union Jack-MSA2004, BMC motif-MSA2008, GT-MSA2006, Austin-MSA2005, Mini-MSA2003, Cooper-MSA2007, 5Speed MSA2000.
10.
BG8117
Small mini spares gear knob, for recessed-BG8113.
11.
BG8116
Medium minispares gear knob, for recessed-BG8111
12.
BG8115
Large mini spares gear knob, for recessed-BG8111.
13.
SZU10001
Latest clutch and brake heavy duty pedals.
14. GPR107 pad.
Original clutch and brake pedal pad, as fitted from 1976 up to the introduction of SZU10001
15. GPR104
Clutch/brake pedal as fitted up to 1976, plus accelerator pad for vehicles 1976 on.
16.
GPR105
Accelerator rubber pedal pad for vehicles pre 1976.
17.
A200017
Race/Rally alloy pads for clutch and brake, as a pair.
18. A200015
Mini accelerator metal pedal for vehicles pre 1976.
19.
Latest 1997 specification Rover look a like bolt on accelerator pedal for vehicles 1976 on..
A200016
13
Mini Mania
13-35
Steering Wheels
1
4
2
6
5
7
8
3
12
12
12
13-36
8
www.MiniMania.com e-mail
[email protected] 800-946-2642 Tech: 408-942-5595
STEERING WHEELS
DESCRIPTION
1.
23SBLB
Black center 3 spoke 12 leather semi dished wheel only.
2.
23SPLB
Polished center 3 spoke 12 semi dished wheel.
3.
353SPW
13 3 spoke, semi dished steering wheel with dark wooden rim, polished center
4.
33SBLB
Black center 13 3 spoke with slots, leather semi dished. polished-33SPLB
5.
33SPLBH
Classic 1960s and 1970s look. 3 spoke 13 with holes, leather semi dished. black center-33SBLBH
6.
34SBLB
Black center 4 spoke 13 leather semi dished, Black center 4 spoke 14-44SBLB.
7.
34SPLB
Polished center 4 spoke 13 leather semi dished. 4 spoke 14-44SPLB
8.
SWAB
Boss with horn push facility for vehicles with single indicator stalk pre 1976. Boss with horn push facility for vehicles with twin indicator/wash, wipe stalks as fitted from 1976-SWABC.
9.
M34M3P?
Add following to part number for color, B for black, S for silver, G for gold. Black moulded 3 spoke anodised centerm, with perforated hand grip.
10.
M34M366?
Add following to part number for color, B for black, S for silver, G for gold. For black rim M34M366? for red rim M34M377?, Blue rim- M34M388?.
11.
M34M311?
3 spoke anodised center with leather rim, available in blak, red, blue, white, and grey. For blackM42M311?, Red-M34M322?, Blue-M34M333?, White-M34M355?, Grey-M34M355?
12. SWABM
Multi hole adapter kit to fit all M range and mini spares ST range of steering wheels also fits Momo Jamex, BBS, Sparco and others.
13.
MOTO-LITA
Mark 4 with holes 13 flat spoke MLW1111-13, 14 flat spoke-MLW1111-14, 13 dished spokeMLW1113-13, 14 dished spoke-MLW1113-14.
14.
COOPER
For mk2 66-69- JCA9001MK2, for mk3 69-76-JCA9001MK3, 1977 on-JCA9001X
15. CLASSIC
Hand finished with finger notches carved into the underside. 13 flat spoke-MLW1115-13, 14 flat spoke- MLW1115-14, 13 dished spoke MLW1116-13, 14 MLW1116-14.
16.
CLASSIC
Mark 3 with slots. 13 flat spoke-MLW1117-13, 14 flat spoke-MLW1117-14, 13 dished spokeMLW1118-13, 14 dished-MLW1118-14.
17.
MCC301
Billet Cooper steering wheel center
18. HORN PUSH
Austin-27H6943, Morris-27H6944.
19. BG5101MS
Steering column lowering bracket.
13
Mini Mania
13-37
Cobra Seats
1
4
6
5
7
13-38
3
2
8
www.MiniMania.com e-mail
[email protected] 800-946-2642 Tech: 408-942-5595
COBRA SEATS
DESCRIPTION
In addition of the standard models listed below, there is a range of options and a Cobra Signature series available. For further information or ordering of other models, please refer to our website at www.minimania.com. 1.
CLASSIC
CLASSIC01 Black Nylon CLASSIC02 Black Vinyl CLASSIC03 Grey Vinyl CLASSIC04 Black Leather CLASSIC05 Grey Leather
2.
CUB
CUBSEA01 Black Nylon CUBSEA02 Black Vinyl CUBSEA03 Grey Vinyl CUBSEA04 Black Leather CUBSEA05 Grey Leather
3.
DAYTONA
DAY001 Blackrock Fabric with Black Perforated Vinyl Patches. DAY002 Bluerock Fabric with Black Perforated Vinyl Patches. DAY003 Redrock Fabric with Black Perforated Vinyl Patches. DAY004 Greyrock Fabric with Black Perforated Vinyl Patches. DAY005 Black Vinyl all over with no patches. DAY006 Grey Vinyl all over with no patches. DAY007 Black Leather all over with no patches. DAY008 Grey Leather all over with no patches
4.
EVOLUTION
EVOLU01 All Blackrock with Black Perforated Vinyl Patches - Diolen. EVOLU02 All Redrock with Black Perforated Vinyl Patches - Diolen. EVOLU03 All Bluerock with Black Perforated Vinyl Patches - Diolen. EVOLU04 All Greyrock with Black Perforated Vinyl Patches - Diolen. EVOLU05 All Blackrock with Black Perforated Vinyl Patches - Kevlar. EVOLU06 All Redrock with Black Perforated Vinyl Patches - Kevlar. EVOLU07 All Bluerock with Black Perforated Vinyl Patches - Kevlar. EVOLU08 All Greyrock with Black Perforated Vinyl Patches - Kevlar.
5.
IMOLA
IMOLA01 Diolen- Black Nylon - Black Perforated Vinyl Patches. IMOLA02 Diolen- Black/Red Nylon - Black Perforated Vinyl Patches. IMOLA03 DiolenBlack/Blue Nylon - Black Perforated Vinyl Patches. IMOLA04 Diolen- Black/ Green Nylon - Black Perforated Vinyl Patches. IMOLA05 Diolen- Black/Yellow Black Perforated Vinyl Patches. IMOLA06 Kevlar- Diolen- Black Nylon - Black Perforated Vinyl Patches. IMOLA07 Kevlar- Black/Red Nylon - Black Perforated Vinyl Patches. IMOLA08 Kevlar- Black/Blue Nylon - Black Perforated Vinyl Patches. IMOLA09 Kevlar- Black/Green Nylon - Black Perforated Vinyl Patches. IMOLA10 Kevlar- Black/Yellow - Black Perforated Vinyl Patches.
6.
LE MANS
1LEMA01 Blackrock Fabric. LEMA02 Bluerock Fabric. LEMA03 Redrock Fabric. LEMA04 Greyrock Fabric. LEMA05 Black Vinyl all over. LEMA06 Grey Vinyl all over. LEMA07 Black Leather all over. LEMA08 Grey Leather all over.
7.
MONACO
MON001 Black Nylon Fabric with Black Perforated Vinyl Patches. MON002 Blue Nylon Fabric with Black Perforated Vinyl Patches. MON003 Red Nylon Fabric with Black Perforated Vinyl Patches. MON004 Blackrock Fabric with Black Perforated Vinyl Patches. MON005 Bluerock Fabric with Black Perforated Vinyl Patches. MON006 Redrock Fabric with Black Perforated Vinyl Patches. MON007 Greyrock Fabric with Black Perforated Vinyl Patches. MON008 Black Vinyl all over with no patches. MON009 Grey Vinyl all over with no patches.
8.
MONACO EVO
MONEV01 Black/Yellow Nylon Fabric with Black Perforated Vinyl Patches. MONEV02 Red/Black Nylon Fabric with Red Perforated Vinyl Patches. MON EV03 Blue/Red Nylon Fabric with Red Perforated Vinyl Patches.
Mini Mania
13
13-39
Cobra Seats
9
12
10
13
14
11
13-40
www.MiniMania.com e-mail
[email protected] 800-946-2642 Tech: 408-942-5595
COBRA SEATS
DESCRIPTION
9.
CLUBM01 Black with Black centers and Black Perforated Vinyl Patches. CLUBM02 Black with Blue centers and Black Perforated Vinyl Patches. CLUBM03 Black with Red centers and Red Perforated Vinyl Patches. CLUBM04 Black with Grey centers and Black Perforated Vinyl Patches.
NEW CLUBMAN
10. ROASTER 7
ROADS01 Black Nylon/Black Nylon Piping. ROADS02 Black Vinyl/Black Vinyl Piping. ROADS03 Grey Vinyl/Grey Vinyl Piping. ROADS04 Black Leather/Black Piping. ROADS05 Grey Leather/Grey Piping.
11. SIDEWINDER
SIDEW01 Blackrock fabric with Bluerock fabric centers. SIDEW02 Blackrock fabric with Redrock fabric centers. SIDEW03 Blackrock fabric with Greyrock centers. SIDEW04 Black Leather all over. SIDEW05 Grey Leather all over.
12.
SPORTS CAR REC.
SPOCAR01 Black Nylon. SPOCAR02 Grey Nylon. SPOCAR03 Black Vinyl. SPOC AR04 Grey Vinyl. SPOCAR05 Black Leather all over. SPOCAR06 Grey Leather all over.
13.
SPORTLINE
SPORT01 All Blackrock with Black Perforated Vinyl Patches - Diolen. SPORT0 All Redrock with Red Perforated Vinyl Patches - Diolen. SPORT0 All Blackrock with Black Perforated Vinyl Patches - Kevlar. SPORT0 All Redrock with Red Perforat ed Vinyl Patches - Kevlar.
14.
SUZUKA
SUZUK01 Diolen - All Blackrock with Black Perforated Vinyl Patches. SUZUK02 Diolen - All Redrock with Black Perforated Vinyl Patches. SUZUK03 Diolen - All Bluerock with Black Perforated Vinyl Patches. SUZUK04 Kevlar - All Blackrock with Black Perforated Vinyl Patches. SUZUK05 Kevlar - All Redrock with Black Perforated Vinyl Patches. SUZUK06 Kevlar - All Bluerock with Black Perforated Vinyl Patches.
13
Mini Mania
13-41
Race and Rallying parts 1
2
3
15
5
16
6
4
7
14 13 12
A
10
17
8
13-42
9
11
www.MiniMania.com e-mail
[email protected] 800-946-2642 Tech: 408-942-5595
RACE AND RALLYING PARTS
DESCRIPTION
1.
MSA1111
Automatic securon seat belt.
2.
MSA1112
Static securon seat belt.
3.
MSA1114
3 point fixing rally harness, 4 point fixing rally harness- MSA1110
4.
C-AJJ3329
This the original copy of the heavy lamp bar fitted to the Abingdon Special Tuning works cars. It is sold only as a bar with the 3 chrome brackets.
4a.
MSA1101
Budget lightweight version of the above in black powder coated finish.
5.
C-AJJ4005
Original works quick lift jacking brackets. Two were fitted to both the front and rear about 12" apart from the center, which meant the car could quickly be raised by an over center quick lift jack as used by Formula One Teams.
6.
C-AJJ3381
Original type leather bonnet strap, alloy fastening, and sold complete with screws.
7.
21A1241
Towing Eye hooks, replaces bolt that holds front subframe to front panel.
8.
C-AHT32
Original Special Tuning alloy heavy duty alternator bracket. Only fits Pre A- Plus engines.
9.
BG5001MS
Seat adjusting bracket. Two per seat.
10.
SEAT 08
Seat subframes are not supplied with seats and are available as follows.
11.
SEAT 09
Mini tailored seat subframe. Mini tailored seat subframe with locking mechanism to fit floor loops as fitted on late cars.-l/h-SEAT10LEFT, r/h-SEAT10RIGHT
OIL COOLERS, ETC. 12. MOC10ROW
10 row oil cooler.
13. C-ARH221
13 row oil cooler as fitted to Cooper 'S'.
14. C-RO9809
16 row oil cooler for competition use.
15. 21A1794
Original oil cooler brackets to fit on front subframe sold singly. (Check clearance on latest cars.)
16. C-AHT4-MINI
Braided oil cooler pipes, Mini Clubman and specials usually have the longer pipe kit and the standard Mini the shorter pipe kit, all unions included for easy fitment.MOC100102-CLUBMAN , C-AHT4-MINI Oil Cooler Shroud for cold weather driving.
17. P1079
13
Mini Mania
13-43
Tools
1
2
3
4
8
5
7
6
10
9
11
12
13 12
13-44
13
www.MiniMania.com e-mail
[email protected] 800-946-2642 Tech: 408-942-5595
TOOLS
DESCRIPTION
1.
EEZIBLEED
Eezibleed, new fluid, pressure. changing
2.
MSA1001
Clik-adjust is a tool made to simplify the job of adjusting valve clearance. By using the correct size socket on the tool, clearances can be set by turning the clik-adjust the amount of turns that correspond to the instructions for the clearance needed.
3.
GUNNSONO2
Colortune is a glass topped spark plug which allows you to see the color of the combustion in the chamber. Colortune takes the guess work out of the mixture adjustment because different fuel/air mixtures burn with different colors. Kit includes everything you need with instructions and wall chart.
4.
MSA1003
Carbalancer allows both air intakes on twin and twin choke carburettors to be balanced so they flow exactly the same amount of air. This in turn will give you better performance with a smoother engine and better economy.
5.
660510
Brake adjusting spanner with longer handle for improved leverage has 5/ 16AF and 1/4AF hexagon closed ends. This will adjust the rear brake shoes on all Minis.
6.
BLM810
Brake adjusting spanner with longer handle for improved leverage has a 5/ 16AF open end for adjusting front brake shoes where the closed end for the common sized rear bleed screw.
7.
18G468MS
This tool is required for fitting the chrome or black insert in the windscreen rubber or backlight rubber.
8.
MSA1004
The valve grinding stick is necessary for lapping in the valves when rebuilding cylinder heads.
9.
UNI-SYN
The Uni-syn tool is used to accurately balance twin carbs.
one person brake or clutch bleed kit. Includes container to hold interchangeable caps and pipe which connects to a tire for With fitting instructions. This kit fits many cars. Ideal for fluid throughout the system, it makes life really easy.
10. 00-3683
The SU tool kit includes instructions and all the special tools to adjust or maintain the HS2/4.
11. 660220
Valve Spring Compressor for all small cylinder heads.
12. CA40
Box spanner for removing float needle valve.
13. 111-6083
Spanner for adjusting mixture of the HS2/4
14.
Vizibleed
T20
13
Mini Mania
13-45
Tools
1
5
7
3 2 4
8
9 10
6
12
13
11
13-46
www.MiniMania.com e-mail
[email protected] 800-946-2642 Tech: 408-942-5595
NO. PART NO.
DESCRIPTION
TOOLS 1.
07-035
A universal scissor type ball joint splitter for swivel pins, upper and lower arm ball joints plus track rod ends. The professionals tool.
2.
660330
Suspension rubber cone compressor with two threaded pins, an AF threaded pin for suspension cones made before 1974 and a metric threaded pin for suspension cones after 1976. Take care on early models, where the suspension cone might already have been changed to metric, as it is easy to cross-thread the tool. Only the later metric type cone is available from Rover as a spare part.
3.
TOOL07
1.5", 1/2" drive deep socket is specially made for changing swivel pin joints in the Mini and will also fit the flywheel bolt.
4.
TOOL04
1.5/16", 1/2" drive AF socket for use on the crankshaft bolt and camshaft nut when changing timing cover oilseal or timing gears, steering wheel and disc brake hub nuts.
5.
CE12
Two - part primary gear oil seal tool, (known as clutch seal tool). It includes the sleeve that slides over the primary gear to protect the seal membrane on the gear splines, plus the outer body that pushes the seal home square. This is achieved by using the flywheel bolt in the end and tightening.
6.
07.001
Fly wheel puller that includes bolts for either early AF or metric type late flywheels.
7.
18G1240
Inboard CV (pot joint) splitting tool for removing the constant velocity joint from the gearbox by way of driving it between them as a wedge. Does not remove joint from driveshaft.
8.
660490
General purpose wedge type splitter for ball joints.
9.
BLM024
1.5" AF flat spanner tool for the flywheel bolt to change the clutch.
10. 660260
Rear hub puller for extracting rear hub neatly when changing studs, wheel bearings or oil seal.
11. CHM64
Jack, Standard Mini
12. MPT102
Hydraulic Hose Clamp
13
Mini Mania
13-47
Books
13-48
www.MiniMania.com e-mail
[email protected] 800-946-2642 Tech: 408-942-5595
Books 103422A 107793A 111285 118552 Book 52 527
The Works Mini SU carb manual Cars of BMC NLC Sports Cars & Competition Driving SU Tuning Tips & Techniques 59 - 69 Mini Workshop - Haynes 646 69 - 93 Mini Workshop - Haynes 907073174 Mini Cooper,61 - 71 907073174/2Mini Cooper, 61-71 2nd edition. 94648922 Practical Classics Mini AKD3891 Cooper S Drivers Handbook AKD4130 Moke Drivers Handbook AKD4935 Mini Workshop Manual AKM3547 Mini Handbook AKM4694 Metro Workshop Factory Manual AKM639 Mini Workshop, Late AKM6579 Manual Late Cooper AKM7168 Mini drivers handbook, late AKD7347 Mini 850 & 1000 AKD4992 Handbook mini mkII AKD4997 Mini coopers and S mkII AKD7347 Mini 850 and 1000 AKM4694 Metro Workshop Manual AKM6353 Mini shop man. 80 on. ALT9002 Factory SU Book, 1980 - on ALT9201 SU book ALT9322 Factory SU Book, 1930 - 1980 ALT9401 SU Needle Chart ALT9520 SU reference catalog ALT9525 SU workshop manual BKM3362 Handbook late cooper. BKM3575 Owners manual pkg #7 Book 01 How to Modify Your Mini-David Vizard Book 02 D.I.Y. Mini Restoration - Lindsay Porter Book 03 Mini Muscle Cars 61 - 79 - Brooklands Book05 Flattened Fauna Book 08 New Cooper Book Book 09 Rover Heritage Trust Book10 Front wheel drive hp advantage Book11 More about mini. Book12 Roadkill cookbook Book 13 Celebration of Mini Book 16 Mini 30 Years On - Rob Golding Book 17 The Sporting Minis - John Brigden Book 18 Mini Cooper, The Real Thing - John Tipler Book 19 Mini Down Under Book 21 Moke Book - Brooklands Book 22 Vintage Race Book Book 24 High Performance Driving - Bob Bondurant Book 25 Tuning the Classic Mini - Clive Trickey Book27 Race and rally source book Book28 Piper tuning manual Book 30 Big Mini Book - Johannes Hubner Book 32 Original, Mini Cooper & S - John Parnell Book38 How to restore british sportcars Book 39 Monte Carlo, The Mini Legend
Book 42 Book 43 Book 44 Book 47 Book 48 Book 49 Book 50 Book 51 Book52 Book 55 Book 56 Book 58 Book 59 Book 68 Book66 Book 74 Book 77 Book78 Book82 Book83 Book84 Book87 Book88 Book90 Book92 Book93 Book94 Book95 Boschbook CWM1004 F732 F395 F445 FD3506 HP46 Minitech Pamphlet P111 PUB107 PST104
A-Z Works Rally Cars - Graham Robson Mini, 35 Years On - Rob Golding Vintage Auto Racing Complete Mini By Reese MINI Service Guide 59 - 94 Brake Handbook - F. Puhn Micro & MINI cars buyers guide AUSTIN 7 Specials SU tuning tips and tech Driving in Competition by Johnson Haynes for Weber, SU/Stromberg & Zenith Works MINIS, 2nd edition Engineer to Win by Smith MINI SURVIVAL MANUAL Haynes paint and Repair HI-PER MINIS PORTFOLIO Tune to win. Smith Prepare to win Mini Complete story Smith Nuts bolts plum Mini color family alblum Mini Gold Portfolio 1981-1997 Mini:The design icon of a generation How to power tune 1275 How to power tune 948-998 Gold Portfolio Mini 1969-1980 Building preparing and racing your mini Mini The racing story by John Baggot Bosch automotive handbook SU Manual, haynes and various su carbs Tuning the A Series Engine David Vizard Amazing Mini. Peter Filby Super profile mini Mini service comp. Lindsey Porter. How to Make Your Car Handle - Fred Puhn Minitech News Vintage Racing Information Mighty Mini - Chris Harvey Army Part Manual Poster Mini vs Sprite
Videos T352 T365 T363 T360 T353 T356 T351
Mini Mania
Mini Power Mini Across America The Italian Job Mini Wizardry on Wheels The Mini Cooper Mini Goes Racing Video The Mini Video
13
13-49
Keyfobs and Stickers
12
14
13
22
21
15
20
19
16
17
23 24
18 26
27
28 29 32
31
33
35 36
13-50
25
37
38
30
34
39
40
www.MiniMania.com e-mail
[email protected] 800-946-2642 Tech: 408-942-5595
KEYFOBS STICKERS CP314 CP339 CP343 CP348 CP350 CP364 CP379 CP422 BP10 ST110 ST113 ST115 ST120 ST126 ST135 ST136 ST137 ST153 ST154 12. MSA2101 13. MSA2106 14. MSA2108 15. MSA2104 16. MSA2110 17. MSA2111 18. MSA2113 19. MSA 2100 20a. MSA2102 20b. MSA2103 21. MSA2104 22. MSA2105 23. MSA2001 24. MSA2004 25. MSA2006 26. MSA2000 27. MSA2007 28. MSA2005 29. MSA2003 30. MSA2002 31. BADGE01 32. PINO8 34. PIN13 35. PIN01 36. PIN04 38. PIN07 39.
DESCRIPTION Morris motors chassis plate. Austin/Morris chassis plate Engine number plate. Austin rocker cover plate. Weslake rocker cover plate. Morris rocker cover plate. Chassis plate mini all MK 1/2. Chassis plate MK3 Cooper S. Downton rocker cover. Leyland ST rocker cover label Negative earth label silver/black. Negative earth label red. Cooper air filter sticker. British Leyland (Logo) (32x40mm)for rocker cover. Morris rocker cover Austin rocker cover Weslake patents ST tuning Abingdon badge (green/white) Healey valve clearance BMC decal on silver background. Square black leather key fob. Crossed flags on black leather key fob. Austin Seven on black leather key fob. Mini Spares go to Monte Carlo key fob. Morris Mini Minor on black leather key fob. Austin Mini on black leather key fob. Mini Minor on tan leather key fob. Wood and Pickett key fob. BMC decal on white background. Pear shape black leather fob. BMC decal on white background. Pear shape tan leather fob. Mini Spares goes to Monte Carlo key fob. Square key fob bare (to take choice of decal). Black leather only. BMC motif stick on emblem. Union Jack stick on emblem. GT stick on emblem. Mini Spares 5 speed stick on emblem. Cooper stick on emblem. Austin stick on emblem. Mini stick on emblem. Cooper S stick on emblem. Union Jack, Body Badge Lapel Pin, Small Union Jack Lapel Pin, BMC Drivers Club Lapel Pin, Monte Mini 177 Lapel Pin, Mini (choice of Sedan, PU, Van or Wagon various colors. Lapel Pin, Prince of Darkness Lapel Pin, Morris Logo
Mini Mania
13
13-51
Toys
13-52
www.MiniMania.com e-mail
[email protected] 800-946-2642 Tech: 408-942-5595
TOYS
DESCRIPTION
1.
04420
Mini Egg, 1:36 scale.
2.
04410
Red union jack, 1:36 scale.
3.
04412
Charcoal with checkers, 1:36 scale.
4.
04416
Kingfisher blue with checkers, 1:36 scale.
5.
04427
1997 RAC Rally minisport.
6.
61211
Mr Beans mini. Available in 1:43 scale and 1:36 scale.-04419
7.
96951
Classic police van, 1:43 scale.
8.
06002
AA Classic patrol van, 1:43 scale.
9.
04413
British Racing Green with union jack, 1:36 scale.
10.
05506
Italian Job Set, Italian Job set with coach-36502
11.
06001
Minivan, post office telephones.
12.
08002
Royal mail and post 2 minivan set
13.
06003
Minivan bks air transport.
14.
04424
British gas rally car
13
Mini Mania
13-53
