Service Manual
Video
GDV 200 GMH7800
ʀ
ON / OFF
VCD
TITLE CHAPTER TRACK SCAN REPEAT SHUFFLE
TOTAL TRACK TIME CHAPTER
TITLE TRACK
D V D / V I D E O C D / C D P L AY E R
OPEN / CLOSE
Grundig Service Hotline Deutschland... ...Mo.-Fr. 8.00-18.00 Uhr Technik:
Zusätzlich erforderliche Unterlagen für den Komplettservice Additionally required Service Documents for the Complete Service
Service Manual Sicherheit Safety
TV TV SAT VCR/LiveCam HiFi/Audio Car Audio Telekommunikation Fax:
Planatron (8.00-22.00 Uhr) 0180/52318-99 Ersatzteil-Verkauf:
Materialnr./Part No. 72010 800 0000
Materialnummer/Part Number 72010 538 0000 Änderungen vorbehalten/Subject to alteration • Printed in Germany WÜ E-BS34 0101 http://www.grundig.com
0180/52318-41 0180/52318-49 0180/52318-48 0180/52318-42 0180/52318-43 0180/52318-44 0180/52318-45 0180/52318-51
...Mo.-Fr. 8.00-19.00 Uhr
Telefon: Fax:
0180/52318-40 0180/52318-50
Allgemeiner Teil / General Section
GDV 200
Es gelten die Vorschriften und Sicherheitshinweise gemäß dem Service Manual "Sicherheit", Materialnummer 72010 800 0000, sowie zusätzlich die eventuell abweichenden, landesspezifischen Vorschriften!
The regulations and safety instructions shall be valid as provided by the "Safety" Service Manual, part number 72010 800 0000, as well as the respective national deviations.
GB
D
Inhaltsverzeichnis
Table of Contents
Seite Allgemeiner Teil ................................ 1-3…1-19
Page General Section ................................. 1-3…1-32
Messgeräte / Messmittel ............................................................. Technische Daten ....................................................................... Ausbauhinweise .......................................................................... Servicehinweise .......................................................................... Bedienhinweise ...........................................................................
1-3 1-3 1-4 1-6 1-7
Test Equipment / Jigs ................................................................. 1-3 Specifications .............................................................................. 1-3 Disassemly Instructions .............................................................. 1-4 Service Instructions ..................................................................... 1-6 Operating Hints ......................................................................... 1-20
Servicetestprogramm ......................... 2-1…2-8
Service Test Programme ................... 2-9…2-16
Fehlersuchdiagramme ........................ 3-1…3-7
Trouble Shooting Diagrams ................ 3-1…3-8
Netzteil ......................................................................................... Bedieneinheit ............................................................................... A/V-MUX-Platte ............................................................................ DVD-Monoboard ..........................................................................
Power Supply ............................................................................... Keyboard Control ......................................................................... A/V MUX Board ............................................................................ DVD-Monoboard .........................................................................
3-1 3-2 3-3 3-6
3-1 3-2 3-3 3-7
Platinenabbildungen und Schaltpläne ................................ 4-1…4-44
Layout of the PCBs and Circuit Diagrams ........................ 4-1…4-44
Verdrahtungsplan ........................................................................ 4-1 Blockschaltpläne ......................................................................... 4-3 Netzteil ........................................................................................ 4-9 A/V-MUX-Platte ......................................................................... 4-13 • Video ....................................................................................... 4-15 • EURO-AV- / Y/C-Buchsen ...................................................... 4-17 • Audio ....................................................................................... 4-19 Bedieneinheit ............................................................................. 4-21 DVD-Monoboard ........................................................................ 4-25 • Signal-Prozessor, Laser- und Laufwerksteuerung .................. 4-29 • Servo ....................................................................................... 4-31 • Decoder .................................................................................. 4-33 • Speicher .................................................................................. 4-35 • Prozessor und Decoder .......................................................... 4-37 • Audio/Video ............................................................................. 4-39 • Messpunkte ............................................................................. 4-41 Oszillogramme ........................................................................... 4-43
Wiring Diagram ............................................................................ 4-1 Block Circuit Diagrams ................................................................. 4-3 Power Supply ............................................................................... 4-9 A/V MUX Board .......................................................................... 4-13 • Video ....................................................................................... 4-15 • EURO-AV- / Y/C Sockets ........................................................ 4-17 • Audio ....................................................................................... 4-19 Keyboard Control ....................................................................... 4-21 DVD-Monoboard ........................................................................ 4-25 • Signal Processor, Laser and Drive Control ............................. 4-29 • Servo ....................................................................................... 4-31 • Decoder .................................................................................. 4-33 • Memory ................................................................................... 4-35 • Processor and Decoder .......................................................... 4-37 • Audio/Video ............................................................................. 4-39 • Test Points .............................................................................. 4-41 Oscillograms .............................................................................. 4-43
Explosionszeichnungen und Ersatzteillisten .............................. 5-1…5-4
Exploded Views and Spare Parts Lists ................................. 5-1…5-4
„Dolby“, „Dolby Pro Logic“, „AC 3“ ist gefertigt unter Lizenz von Dolby Laboratories Licensing Corporation. „Dolby“, „Dolby Pro Logic“, „AC 3“ und das Doppel-D-Symbol „ “ sind Warenzeichen der Dolby Laboratories Licensing Corporation. Copyright 1992 Dolby Laboratories, Inc. Alle Rechte vorbehalten.
“Dolby“, “Dolby Pro Logic“, “AC 3” manufactured under license from Dolby Laboratories Licensing Corporation. “Dolby“, “Dolby Pro Logic“, “AC 3” and the double-D symbol “ ” are trademarks of the Dolby Laboratories Licensing Corporation. Copyright 1992 Dolby Laboratories, Inc. All rights reserved.
ij
1-2
ij
GRUNDIG Service
GDV 200
Allgemeiner Teil / General Section
Allgemeiner Teil
General Section
Messgeräte / Messmittel
Test Equipment / Jigs
Regeltrenntrafo Digitalmultimeter Frequenzzähler
Variable isolating transformer Digital multimeter Frequency counter
Zweikanaloszilloskop Millivoltmeter
Beachten Sie bitte das Grundig Messtechnik-Programm, das Sie unter folgender Adresse erhalten:
Dual channel oscilloscope Millivoltmeter
Please note the Grundig Catalog "Test and Measuring Equipment" obtainable from:
Grundig AG Geschäftsbereich Instruments Test- und Mess-Systeme Würzburger Str. 150, D 90766 Fürth Tel.: 0911 / 703-4540; Fax: 0911 / 703-4130 eMail:
[email protected] Internet: http://www.grundig-instruments.de
Technische Daten
Specifications
Netzspannung:
196V … 264V~, 50Hz
Supply Voltage:
196V … 264V~, 50Hz
Leistungsaufnahme:
ca. 20W
Power Requirement:
ca. 20W
Umgebungstemperatur:
+10°C … +35°C
Ambient Temperature:
+10°C … +35°C
Relative Luftfeuchte:
≤80%
Relative Air Humidity:
≤80%
Wiedergabe-Norm:
PAL, 50Hz, 625 Zeilen NTSC, 60Hz, 525 Zeilen
Playback Norm:
PAL, 50Hz, 625 lines NTSC, 60Hz, 525 lines
Wiedergabe-System:
DVD-Video, Video-CD, Audio-CD Multistandard PAL/NTSC, CD-R, CD-RW
Playback System:
DVD-Video, Video-CD, Audio-CD Multi-standard PAL/NTSC CD-R, CD-RW
DVD Disk Format:
Durchmesser 8cm und 12cm
DVD Disc Format:
Diameter 8cm and 12cm
Video Format Signal: Digital compression: DVD Horiz. Auflösung: Vert. Auflösung: VCD Horiz. Auflösung: Vert. Auflösung: Audio Format Digital:
Analog:
Digital MPEG2 für DVD MPEG1 für VCD 50Hz 720 Pixel 576 Zeilen 50Hz 352 Pixel 288 Zeilen
Video Format Signal: Digital compression: 60Hz 720 Pixel 480 Zeilen 60Hz 352 Pixel 240 Zeilen
MPEG/AC-3 PCM
Compressed Digital 16, 20, 24 bit 48 / 96kHz Stereoton, Dolby Surround, 3D Sound
Audio Performance Signal: DVD:
Analog fs 96kHz fs 48kHz VCD: fs 44,1kHz CD: fs 44,1kHz Rauschabstand (1kHz): >110dB Dynamik (1kHz): >100dB Übersprechdämpfung (1kHz): >115dB
4Hz … 44kHz 4Hz … 22kHz 4Hz … 20kHz 4Hz … 20kHz
DVD Horiz. resolution: Vert. resolution: VCD Horiz. resolution: Vert. resolution: Audio Format Digital:
Analog:
Digital MPEG2 for DVD MPEG1 for VCD 50Hz 720 pixel 576 lines 50Hz 352 pixel 288 lines
60Hz 720 pixel 480 lines 60Hz 352 pixel 240 lines
MPEG/AC-3 PCM
Compressed Digital 16, 20, 24 bit 48 / 96kHz stereo sound, Dolby Surround, 3D Sound
Audio Performance Signal: DVD:
Analog fs 96kHz fs 48kHz VCD: fs 44.1kHz CD: fs 44.1kHz Signal-to-noise ratio (1kHz): >110dB Dynamic range (1kHz): >100dB Crosstalk damping (1kHz): >115dB
4Hz … 44kHz 4Hz … 22kHz 4Hz … 20kHz 4Hz … 20kHz
Anschlußbuchsen/Umschalter Netzbuchse:
2-polig
Connection sockets/Switches
Digital-Audio-Buchse:
1 Cinch, 1 Optisch
Mains Socket:
2-poled
2 Cinch
Digital Audio Socket:
1 Cinch, 1 optical
Video-Buchse: FBAS
1 Cinch 1VSS / 75Ω
2 Audio Sockets:
2 Cinch
S-Video-Buchse: Luminanz Chrominanz
1 Hosiden 1VSS / 75Ω 0,3VSS / 75Ω
Video Sockets: CVBS
1 Cinch 1VPP / 75Ω
Euro-AV-Buchse: mit RGB-Ausgang
21-polig 0,7VSS / 75Ω
S-Video Sockets: Luminance Chrominance
1 Cinch 1VPP / 75Ω 0.3VPP / 75Ω
Euro-AV Socket: with RGB output
21 pin 0.7VPP / 75Ω
2 Audio-Buchsen:
GRUNDIG Service
1-3
Allgemeiner Teil / General Section
GDV 200
Ausbauhinweise (Netzstecker ziehen)
Disassembly Instructions (Disconnect the mains plug)
Öffnen der Schublade bei defektem Laufwerk – Laufwerk ausbauen (Pkt. 7). – Schieber A (Fig. 6) bis zum Anschlag nach links schieben. – Die Schublade kann jetzt herausgezogen werden.
Opening the Tray when the Drive is defective – Remove the Drive Mechanism (para 7). – Push the slider A (Fig. 6) to the left until its stop. – The tray can be pulled out now.
1. Gehäuseoberteil – 7 Schrauben F herausdrehen (Fig. 2). – Gehäuseoberteil abnehmen.
1. Cabinet Upper Part – Undo 7 screws F (Fig. 2). – Remove the upper part of the cabinet.
2. Frontblende – 2 Schrauben E herausdrehen (Fig. 1). – Rasthaken I (Fig. 4) lösen und Frontblende abnehmen. – Gegebenenfalls Steckverbindungen lösen.
2. Front Panel – Undo 2 screws E (Fig. 1). – Release the catches I (Fig. 4) and remove the front panel. – Unplug the connectors if necessary.
3. Bedieneinheit ausbauen – 3 Schrauben M und 4 Schrauben J (Fig. 5) herausdrehen. – 3 Rasthaken K (Fig. 5) lösen und durch die Platine drücken. – Seitenteil N abnehmen (Fig. 5). – Bedieneinheit an der Unterseite anheben und aus der Blende nehmen. Einbauhinweis: – 2 Passstifte L des Lichtleiters und 3 Rasthaken K des Einschaltknopfes in die Aussparungen der Bedieneinheit stecken und mit je 4 Schrauben J und 4 Schrauben M befestigen.
3. Removing the Keyboard Control Unit – Undo 3 screws M and 4screws J (Fig. 5). – Release the 3 catches K (Fig. 5) and push them through the board. – Remove the side part N (Fig. 5). – Lift the keyboard control unit at its bottom side and remove it from the trimplate. Fitting Instructions: – Insert the 2 locating pins L of the optical fibre lead and the 3 catches K of the power-on button into the cutouts in the control unit and fix them with the 4 screws J and 4 screws M, respectively.
4. A/V-MUX-Platte ausbauen – 7 Schrauben H (Fig. 3) herausdrehen. – 2 Rastnasen A (Fig. 1) lösen und A/V-MUX-Platte aus dem Gerät nehmen. – Gegebenenfalls Steckverbindungen lösen.
4. Removing the A/V-MUX Board – Undo 7 screws H (Fig. 3). – Disengage the 2 locking lugs A (Fig. 1) and remove the A/V-MUX Board. – Unplug the connectors if necessary.
6. Netzteil ausbauen – 2 Schrauben D (Fig. 1) und Schraube G (Fig. 3) herausdrehen. – 2 Rastnasen C (Fig. 1) lösen und Netzteil aus dem Gerät nehmen. – Gegebenenfalls Steckverbindungen lösen.
6. Removing the Power Supply – Undo the 2 screws D (Fig. 1) and the screw G (Fig. 3). – Disengage the 2 locking lugs C (Fig. 1) and remove the power supply from the unit. – Unplug the connectors if necessary.
7. Laufwerk ausbauen (CD-Laufwerk) – 4 Schrauben B (Fig. 1) herausdrehen. – Laufwerk in Richtung Geräterückseite aus dem Gerät nehmen. – Gegebenenfalls Steckverbindungen lösen. 7.1 DVD-Monoboard ausbauen – 4 Schrauben I (Fig. 6) herausdrehen und DVD-Monoboard abnehmen. – Gegebenenfalls Steckverbindungen lösen. Achtung: Die Lasereinheit ist sehr empfindlich gegen statische Aufladungen (MOS-Bauteile)! FLEXPRINT Schließen Sie deshalb die Flexprintleitung zur Lasereinheit vor dem Abziehen mit einer Büroklammer kurz.
7. Removing the Drive Mechanism (CD Drive) – Undo 4 screws B (Fig. 1). – Push the CD drive to the back of the cabinet and remove it. – Unplug the connectors if necessary. 7.1 Removing the DVD-Monoboard – Undo 4 screws I (Fig. 6) and remove the DVD-Monoboard. – Unplug the connectors if necessary. Attention: The laser unit is very sensitive to static charges (MOS components)! FLEXPRINT Therefore, short-circuit the Flexprint to the laser unit with a paper clip before disconnecting it.
7.2 Laufwerk ausbauen – DVD-Monoboard ausbauen (Pkt. 7.1). – 2 Schrauben B (Fig. 6) herausdrehen. – 4 Gummipuffer C (Fig. 6) aushängen und die Laufwerksmechanik vorsichtig in Pfeilrichtung herausziehen. Montagehinweis zum Einbau eines neuen Laufwerks: – Flexprint an der Lasereinheit anschließen. – offenes Ende des Flexprint mit einer Büroklammer kurz schließen (MOS-Schutz). – werkseitig angebrachte Schutzlötstellen der Lasereinheit entfernen (Fig. 8).
7.2 Disassembling the Drive Mechanism – Remove the DVD-Monoboard (para 7.1). – Undo 2 screws B (Fig. 6). – Unhook the 4 rubber shock-mounts C (Fig. 6) and pull out carefully the drive mechanism in direction of the arrow. Instructions for Mounting a new Drive Mechanism: – Connect the Flexprint to the laser unit. – Short the open end of the Flexprint with a paper clip (MOS protection). – Remove the factory-applied protective soldering joints from the laser unit (Fig. 8).
7.3 Laufwerk zerlegen – Laufwerk ausbauen (Pkt. 7.2).
7.3 Disassembling the Drive Mechanism – Remove the drive mechanism (para 7.2).
7.3.1 Schublade ausbauen – Schieber A (Fig. 6) bis zum Anschlag nach links schieben. – Schublade herausziehen. – Rastnase E (Fig. 7) vorsichtig mit einem kleinen Schraubendreher anheben und Schublade ganz herausziehen.
7.3.1 Removing the Tray – Push the slider A (Fig. 6) to the left until its stop. – Pull the tray out. – Carefully lift the locking lug E (Fig. 7) with a small screw driver and pull the tray out completely.
7.3.2 Lasereinheit ausbauen – 4 Rastnasen F (Fig. 9) ausrasten und DVD-Abdeckung G abnehmen. – Bügel I (Fig. 10) ausrasten und Lasereinheit J herausnehmen. Beim Wiedereinbau auf korrekten Sitz der Lasereinheit in den Führungen K (Fig. 11) achten!
7.3.2 Removing the Laser Unit – Disengage the 4 locking lugs F (Fig. 9) and remove the DVD cover G. – Unhook the clip I (Fig. 10) and remove the Laser Unit J. When reassembling, the laser unit must fit in the guides K (Fig. 11)!
7.3.3 Lademotor ausbauen – Riemen H (Fig. 10) abnehmen. – Bügel D (Fig. 6) ausrasten und Lademotor herausnehmen.
7.3.3 Removing the Loading Motor – Remove the belt H (Fig. 10). – Unhook the clip D (Fig. 6) and remove the loading motor.
1-4
GRUNDIG Service
GDV 200
Allgemeiner Teil / General Section
A
T
F F
C D B
E
F
E Fig. 2
Fig. 1
H
G
I
Fig. 3
Fig. 4
J
C
B
I K L
C
C A
L J
D
C B
M N
Fig. 6
Fig. 5
F
F E
G Fig. 7
GRUNDIG Service
Fig. 8
Fig. 9
1-5
Allgemeiner Teil / General Section
GDV 200
H
Fig. 10
K
J
Fig. 11
I
Servicehinweise
Service Instructions
Wiederherstellen der Gerätefunktion nach Austausch des DVDMonoboard oder Löschen des NVRAMs
Reactivation of the DVD-Player after exchanging the DVD Monoboard or resetting the NVRAM
• DVD aus dem Gerät nehmen, Schublade schließen und warten bis auf dem Bildschirm "no disc" erscheint. • Auf der Fernbedienung die Taste PLAY Q drücken und die Zahlenfolge "274 051 000 000 000" eingeben. • Eingabe mit Taste PLAY Q bestätigen und warten, bis sich das Gerät neu initialisiert. Achtung: Nur bei richtiger Zahlencode-Eingabe sind alle Gerätefunktionen gewährleistet.
• Remove the DVD from the unit, close the tray and wait until "no disc" appears on the picture screen. • Press PLAY Q on the remote control and enter the numbers "274 051 000 000 000". • Press PLAY Q on the remote control to confirm the entry and wait until the DVD-Player is initialized Attention: All functions will operate only if the code number has been entered correctly.
Wichtige Masseverbindungen!
Important: Chassis Connections!
Beim Zusammenbau des Gerätes ist darauf zu achten, dass die Masseverbindungen zwischen den einzelnen Platinen und dem Rahmen sowie dem Laufwerk und dem Rahmen gewährleistet sind.
When reassembling the machine it is essential to observe that the chassis connections between the individual circuit boards and the frame as well as between the Drive Mechanism and the frame are in good order.
Durchführen von Messungen
Carrying out Measurements
Bei Messungen mit dem Oszilloskop an Halbleitern sollten Sie nur Tastköpfe mit 10:1 - Teiler verwenden. Außerdem ist zu beachten, dass nach vorheriger Messung mit AC-Kopplung der Koppelkondensator des Oszilloskops aufgeladen sein kann. Durch die Entladung über das Messobjekt können diese Bauteile beschädigt werden.
When making measurements on semi-conductors with an oscilloscope, ensure that the test probe is set to 10:1 dividing factor. Further, please note that if the previous measurement is made on AC input, the coupling capacitor in the oscilloscope will be charged. Discharge via the item being checked can damage components.
Messwerte und Oszillogramme
Measured Values and Oscillograms
Bei den in den Schaltplänen und Oszillogrammen angegebenen Messwerten handelt es sich um Näherungswerte!
The measured values given in the circuit diagrams and oscillograms are approximates!
1-6
GRUNDIG Service
GDV200
Bedienhinweise
Allgemeiner Teil / General Section
Dieses Kapitel enthält Auszüge aus der Bedienungsanleitung. Weitergehende Informationen entnehmen Sie bitte der gerätespezifischen Bedienungsanleitung, deren Materialnummer Sie in den entsprechenden Ersatzteillisten finden.
AUF EINEN BLICK
______________________________________________________
Die Vorderseite des DVD-Players
ON / OFF
VCD
TITLE CHAPTER TRACK SCAN REPEAT SHUFFLE
TOTAL TRACK TIME CHAPTER
TITLE TRACK
D V D / V I D E O C D / C D P L AY E R
OPEN / CLOSE
A
B
Die Bedienelemente des DVD-Players befinden sich hinter der Klappe. Schaltet den DVD-Player aus Stand-by ein und wieder aus (Stand-by). Der Tastenring zeigt den jeweiligen Betriebszustand: rot – Stand-by; grün – Betrieb.
ON/OFF
A
Schublade für DVD/CD.
B
Anzeige.
OPEN/CLOSE
Zum Öffnen und Schließen der Schublade.
DEUTSCH
Vorsicht: Der DVD-Player wird beim Ausschalten nicht vollständig vom Stromnetz getrennt.
7
AUF EINEN BLICK ______________________________________________________________________ Die Rückseite des DVD-Players
MULTICHANNEL AUDIO OUT LEFT REAR
CENTER
I
LEFT FRONT
DIGITAL AUDIO OUT
AUX/VCR IN STEREO OUT
PCM/MPEG2/AC3/DTS
VIDEO OUT
MAINS
II TV OUT
OPT OUT
DIG OUT
RIGHT REAR
SUBW.
RIGHT FRONT
L R AUDIO OUT
~ MAINS
(CVBS) VIDEO OUT
(Y/C) S-VIDEO OUT
Netzbuchse für das Netzkabel
Digitale Audio Anschlüsse (PCM/MPEG2/AC3/DTS) OPT OUT
Ton-Ausgangsbuchse (optisch), zum Anschließen einer digitalen HiFi-Anlage mit einem handelsüblichen OPTICAL-Kabel.
DIG OUT
Ton-Ausgangsbuchse, zum Anschließen einer digitalen HiFi-Anlage.
GRUNDIG Service
LEFT REAR RIGHT REAR
Ton-Ausgangsbuchsen, zum Anschließen von Surroundlautsprechern.
CENTER
Ton-Ausgangsbuchse, zum Anschließen von einem Mittenlautsprecher.
SUBW.
Ton-Ausgangsbuchse, zum Anschließen von einem Subwoofer.
LEFT FRONT RIGHT FRONT
Ton-Ausgangsbuchsen, zum Anschließen von Frontlautsprechern.
DEUTSCH
Mehrkanal Anschlüsse (MULTICHANNEL AUDIO OUT)
9 1-7
Allgemeiner Teil / General Section
GDV200
AUF EINEN BLICK ______________________________________________________________________ Audio/Video Anschlüsse STEREO OUT R AUDIO OUT ■ L ■
Ton-Ausgangsbuchsen (rechter/linker Kanal), zum Anschließen einer HiFi-Anlage.
VIDEO OUT (CVBS) VIDEO OUT
Bild-Ausgangsbuchse, zum Anschließen eines Fernsehgerätes mit Video-Buchse.
(Y/C) S-VIDEO OUT
Bild-Ausgangsbuchse, zum Anschließen eines Fernsehgerätes mit S-VHS-Buchse.
I AUX/VCR IN ■
Bild-/Ton-Ausgangs-/Eingangsbuchse, zum Anschließen eines Videorecorders.
II ■
Bild-/Ton-Ausgangsbuchse, zum Anschließen eines Fernsehgerätes.
TV OUT
Vorsicht: Schließen Sie keine Geräte an, wenn der DVD-Player eingeschaltet ist. Berühren Sie nicht die Innenseite der Buchsen und Stecker der Verbindungskabel. Eine Elektrostatische Entladung kann den DVD-Player beschädigen.
10
AUF EINEN BLICK ______________________________________________________________________ Die Fernbedienung Mit der Fernbedienung TP 80 V können Sie nicht nur den DVD-Player bedienen, sondern auch Grundig Fernsehgeräte, Videorecorder und Satelliten-Receiver.
80V
1
2
3
4
5
6
7
8
9
DVD TV
Zum Bedienen des DVD-Players den Schiebeschalter »DVD TV VCR EXT« auf die Position »DVD« stellen. Die gelbe Anzeige leuchtet für kurze Zeit.
VCR EXT
9
Schaltet den DVD-Player aus Stand-by ein und wieder aus (Stand-by). Der Tastenring am DVD-Player zeigt den jeweiligen Betriebszustand: rot – Stand-by; grün – Betrieb.
1 … 0 AV
Ziffern-Tasten für verschiedene Eingaben.
,.
Wählen in den Menüs verschiedene Funktionen.
0
P
OK P MUTE TV-GUIDE
TXT
OSD
SUBTITLE
VCR-MENU
SHOWVIEW
MENU
RECORD
PIP
ANGLE
Bestätigt Eingaben in den Menüs.
F E
Schaltet während der Wiedergabe auf Bildsuchlauf rückwärts oder vorwärts in verschiedene Geschwindigkeiten. Wählen in den Menüs verschiedene Funktionen.
7
Beendet alle Funktionen, schaltet den DVD-Player auf „STOPP“.
AUDIO
VOL
SHUFFLE
OK
REPEAT
RETURN
FORMAT
AUX
%
Zeitlupe bei DVDs und Video-CDs.
II
Standbild bei DVDs und Video-CDs; Pause bei Audio-CDs.
8
Startet die Wiedergabe; aktiviert durch zweimaliges Drücken die Funktion „Resume“.
DEUTSCH
TE L E PI L O T
11 1-8
GRUNDIG Service
GDV200
Allgemeiner Teil / General Section
AUF EINEN BLICK ______________________________________________________________________
TE L E PI L O T
80V
1
2
3
4
5
6
7
8
9
DVD
MENU
Ruft während der Wiedergabe das Titelmenü der DVD/VideoCD auf.
OSD
Zum Ein- und Ausblenden der Menüs am Bildschirm des Fernsehgerätes.
SUBTITLE
Blendet während der Wiedergabe die Untertitel der DVD ein.
AUDIO
Schaltet während der Wiedergabe um zwischen Original- und Synchronsprache einer DVD.
– VOL +
Lautstärke leiser/lauter für GRUNDIG Fernsehgeräte ab der Fernbedienung TP 590.
5a
Kurzes Drücken wählen während der Wiedergabe den vorherigen oder nächsten Titel/Abschnitt;
TV VCR EXT
0
P
s6
OK
längeres Drücken schaltet auf Bildsuchlauf rückwärts oder vorwärts.
P MUTE TV-GUIDE
TXT
MENU
OSD
SUBTITLE
RECORD
VCR-MENU
SHOWVIEW
SHUFFLE
Zur Wiedergabe aller Titel einer DVD/CD in zufälliger Reihenfolge.
ANGLE
Wählt während der Wiedergabe verschiedene Blickwinkel (Kamera-Standorte) von bestimmten Szenen oder Passagen der DVD.
REPEAT
Wiederholt während der Wiedergabe Abschnitte, Titel oder DVDs/CDs.
RETURN
Schaltet auf das vorherige Menü der DVD zurück.
AUDIO
VOL
SHUFFLE
ANGLE
PIP
REPEAT
RETURN
FORMAT
AUX
Hinweis: Die Möglichkeiten für die Bedienung von Grundig Fernsehgeräten, Videorecordern und Satellitenreceivern sind ab Seite 54 beschrieben.
12
DIE BENUTZERFÜHRUNG
__________________________________
Mit der Benutzerführung – die Sie am Bildschirm des Fernsehgerätes sehen – können Sie alle Funktionen anwählen sowie die notwendigen Einstellungen durchführen. Symbole, Tasten und Dialogzeilen zeigen die möglichen Bedienschritte.
Die Menüzeile 1 Menüzeile mit »OSD« aufrufen, die Fortsetzung der Menüzeile mit » Ƿ « anwählen. – Die Abbildungen zeigen Ihnen die Möglichkeiten der Menüzeile.
Ö
P a
/
K
(
I
R
k
2
1
off
no
off
s
1
A S
»Ö«
= Menüpunkt »Einstellungen«.
»P«
= Titelanwahl.
»K«
= Kapitelanwahl.
»(«
= Tonspur wählen.
>
»I« = Sprache von Untertiteln wählen. »R« = Verschiedene Blickwinkel wählen. »k«
U
Bildformat
16:9
Schwarzwert
Ein
Bildverschiebung
>
»O« =
»Bildmenü« mit den Funktionen: – Bildformat, – Schwarzwert, – Bildverschiebung, – Farbeinstellungen, – Persönliche Farbwerte.
»>« =
»Tonmenü« mit den Funktionen: – Digitalausgang, – Analogausgang, – Nachtmodus, – Karaoke-Gesang, – Lautsprecher.
»U« =
»Sprachmenü« mit den Funktionen: – Audio (Dialoge), – Untertitel, – Menü.
»Ü«
Menü »Sonderfunktionen« mit den Funktionen: – Zugriffskontrolle, – Statusfenster, – Öko-Standby.
■■ ■■■■■ ■
Farbeinstellungen
1 Persönlich
Persönliche Farbwerte
Einstellungen...
Ü
=
Die Dialoganzeige In der Dialogzeile sehen Sie Informationen über den Betriebszustand.
Ö /
a
P
»
1
»
G
safe
»
H
»
R
»
14
x
locked
2/2 resume %
«
=
Funktion nicht möglich.
«
=
Kindersicherung aktiviert.
«
=
Kindersicherung abgeschaltet.
«
=
Blickwinkel für Szenen.
«
=
Wiedergabe wird fortgesetzt.
DIE BENUTZERFÜHRUNG ________________________________________________________ » » » » »
repeat p
title p
chapter p
track p
shuffle
«
=
DVD´s/CD´s werden wiederholt.
«
=
Titel werden wiederholt.
«
=
Kapitel werden wiederholt.
«
=
Abschnitte werden wiederholt.
«
=
Titel wurden beliebig ausgewählt und abgespielt.
Die Statusanzeige .
!
DVD
pause
2 : 04 : 26 0 : 00 : 21
In der Statusanzeige werden Informationen über die eingelegte DVD/VideoCD, die Gesamtspielzeit und die abgelaufene Spielzeit der DVD/Video-CD eingeblendet: »2 : 05 : 30«
= Gesamtspielzeit.
»0 : 15 : 00«
= Abgelaufene Spielzeit.
Zusätzlich sehen Sie die jeweilige Funktion: ». DVD«
= Video-CD eingelegt.
», reading«
= DVD wird gelesen.
»{ no disc«
= keine DVD oder Video-CD eingelegt.
»] opened«
= Schublade geöffnet.
»[ closing«
= Schublade geschlossen.
ǵ
» ! error«
= Störungsmeldung.
»8 play«
= Wiedergabe.
»7 stop«
= Wiedergabe beenden.
»I I pause« »E
&
»&
W
= Wiedergabe-Pause. x 4 x 32«
1/8 1/4 1/2«
= Bildsuchlauf vorwärts/rückwärts.
DEUTSCH
= DVD eingelegt.
». VCD«
= Zeitlupe vorwärts/rückwärts.
15 1 - 10
GRUNDIG Service
GDV200
Allgemeiner Teil / General Section
DIE BENUTZERFÜHRUNG ________________________________________________________ Die Bedienung mit der Benutzerführung Entnehmen Sie dem folgenden Beispiel den Aufbau der Benutzerführung und die Anwahl der verschiedenen Menüs und Einstellungen.
P
Die Menüzeile wählen Sie mit Taste »OSD«, die einzelnen Menüpunkte wählen Sie mit den Tasten » , « oder » .«, » « oder » «.
Ǹ
OK MUTE
Die Fortsetzung der Menüzeile wählen Sie mit » Ö P /
a
A
1S
K
(
I
R
k
2
1
off
no
off
K
(
I
R
k
2
1
off
no
off
s
Ö P /
1
O
Audio (Dialoge)
Deutsch
Untertitel
Deutsch
Menü
Deutsch
> U
>
>
Ö P /
K
(
I
R
k
2
1
off
no
off
1
Audio (Dialoge)
– Die Menüzeile wird eingeblendet.
2 Gewünschten Menüpunkt (im Beispiel »Ö«) mit » Ǹ « oder » Ƿ « wählen und mit » .« aktivieren. – Das Hauptmenü wird eingeblendet.
>
4 Funktion (im Beispiel »Untertitel«) mit » , « oder » .« wählen und mit »
Ƿ « aktivieren.
Deutsch
A S
>
1 Menüzeile mit »OSD« aufrufen.
aktivieren. – Das Sprachmenü wird eingeblendet.
Ü
U
Ƿ «.
3 Menü (im Beispiel »U«) mit » , « oder » .« wählen und mit » Ƿ «
A S8
O
Ƿ
Der aktive Menüpunkt ist blau hervorgehoben. Menüpunkte, die mit der jeweiligen DVD keine Funktion haben sind grau markiert und können nicht angewählt werden.
P
Untertitel
Deutsch
Menü
Deutsch
5 Gewünschte Einstellung mit » , « oder » .« wählen.
a
Hinweis: Mit »OK« kann schrittweise zurückgeschaltet werden zu den vorherigen Menüs und Menüpunkten.
Ü
6 Menüzeile mit »OSD« abschalten. – Die eingestellten Funktionen oder Werte werden automatisch gespeichert.
16
WIEDERGABE EINER DVD/VIDEO-CD ____________________________________ Vor der Wiedergabe Vorbereiten 1 Fernsehgerät einschalten und den Programmplatz für den DVD-Player wählen.
2 HiFi-Anlage einschalten und den entsprechenden Toneingang für den DVDPlayer wählen.
3 DVD-Player mit »ON/OFF« einschalten. – In der Anzeige des DVD-Players erscheint: »N O D I S C «
VCD
TITLE CHAPTER TRACK SCAN REPEAT SHUFFLE
TOTAL TRACK TIME CHAPTER
TITLE TRACK
DVD/Video-CD einlegen 1 »OPEN/CLOSE« am DVD-Player drücken. – Die Schublade öffnet sich.
2 Gewünschte DVD/Video-CD mit dem Aufdruck nach oben in die Schublade einlegen.
3 »OPEN/CLOSE« drücken, oder
7
reading
stop
- : -- : -- : -- : --
vorsichtig auf die Vorderseite der Schublade drücken. – Anzeige in der Statusanzeige: », reading«, am DVD-Player » , R E A D «, die Wiedergabe startet automatisch. – Nach kurzer Zeit erscheint ein Menü mit Informationen über die DVD. Hinweis: Ist die Kindersicherung aktiviert und die DVD/Video-CD wurde nicht freigegeben (siehe Kapitel „KINDERSICHERUNG“), muß die Geheimzahl eingegeben werden.
DEUTSCH
,
21 GRUNDIG Service
1 - 11
Allgemeiner Teil / General Section
GDV200
WIEDERGABE EINER DVD/VIDEO-CD ____________________________________ Funktionsanzeige aufrufen .
8
DVD
play
Jede Funktion die Sie angewählt haben (zum Beispiel die Spielzeit, der aktuelle Titel, usw.), kann am Bildschirm angezeigt werden.
1 Funktionsanzeige mit »OSD« einblenden.
2 : 04 : 26 0 : 15 : 00
2 Funktionsanzeige mit »OSD« ausblenden.
Wiedergabe eines Titels Nach dem Schließen der Schublade startet die Wiedergabe automatisch.
.
8
DVD
play
1 Auf Wiedergabe-Pause (Standbild) mit »I I « schalten. 2 Wiedergabe mit »8« fortsetzen.
2 : 04 : 26 0 : 11 : 30
3 Wiedergabe mit »7« beenden. Hinweise: Abhängig von der verwendeten DVD/Video-CD kann es notwendig sein, aus einem Inhaltsverzeichnis der DVD/Video-CD den gewünschten Titel oder das Kapitel auszuwählen. Zum Auswählen benutzen Sie die Tasten » , « oder » .«, zum Aktivieren die Taste »OK«. Ist die Auswahl numeriert, verwenden Sie die Tasten »1 … 0 «.
22
WIEDERGABE EINER DVD/VIDEO-CD ____________________________________ Titel oder Kapitel anwählen ... Wenn eine DVD/Video-CD mehrere Titel und/oder Kapitel enthält, können Sie diese anwählen.
... mit dem Menü des DVD-Players 1 Menüzeile mit »OSD« einblenden. Ö P /
a
A 1S
Ö P /
1
Ö P /
a
A 2S
s
a
s
K
(
I
R
k
2
1
off
no
off
(
I
R
k
1
off
no
off
K
(
I
R
k
2
1
off
no
off
K A 2S
s
>
>
>
2 Menüpunkt »P« (für Titel) mit » Ǹ « oder » Ƿ « anwählen oder Menüpunkt »K« (für Chapter/Kapitel) mit »
Ǹ « oder » Ƿ « anwählen.
3 Titel/Kapitel mit » , « oder » .« anwählen. Hinweis: Titel oder Kapitel können auch direkt angewählt werden, dazu die Nummer des betreffenden Titels oder Kapitels mit »1 … 0 « ein- oder zweistellig eingeben.
... mit dem Titelmenü der DVD/Video-CD Das Titelmenü der DVD/Video-CD kann Auswahlmöglichkeiten für Titel, Abschnitte oder Szenen enthalten.
1 Inhalt der DVD/Video-CD mit »MENU« aufrufen.
2 Wenn die Auswahlmöglichkeiten numeriert sind, entsprechenden Titel und Abschnitt mit »1 … 0 « wählen.
3 Sind die Auswahlmöglichkeiten nicht nummeriert, Titel und Abschnitte mit » , « oder » .« wählen und mit »OK« aktivieren.
DEUTSCH
– Wenn die DVD/Video-CD ein Titelmenü enthält, erscheint es am Bildschirm.
23 1 - 12
GRUNDIG Service
GDV200
Allgemeiner Teil / General Section
KINDERSICHERUNG
________________________________________________
Mit der Kindersicherung können Sie: – Die Benutzung des DVD-Players ausschließen; – bestimmte DVDs oder Video-CDs für die Wiedergabe freigeben oder sperren; – Szenen von DVDs oder Video-CDs, die nicht für Kinder geeignet sind, sperren oder alternative Szenen auswählen.
Kindersicherung des DVD-Players aktivieren und abschalten Kindersicherung des DVD-Players aktivieren Ö P
O
1
(
I
R
k
2
1
off
no
off
S Zugriffskontrolle
>
s
>
2 Menüpunkt »Ö« (Einstellungen) mit » Ǹ « oder » Ƿ « anwählen und mit
Kode eingeben…
Statusfenster
Ein
Öko-Standby
Aus
» .« aktivieren.
3 Zeile »Ü« (Sonderfunktionen) mit » .« auswählen und mit » Ƿ «
U Ü
aktivieren.
a
Ö P
K
(
I
R
k
2
1
off
no
off
/
1
O
Zugriffskontrolle
>
1 Menüzeile mit » OSD AUX« aufrufen.
>
a
4 Zeile »Zugriffskontrolle« mit » , « oder » .« anwählen und mit » Ƿ « aktivieren.
5 Vierstellige Geheimnummer mit »1...0 « eingeben.
Statusfenster
()()()()
Öko-Standby
Kode eingeben
Hinweis: Wenn die Geheimnummer das erste Mal eingegeben wird, wechselt die Anzeige in »Kode bestätigen«.
U Ü
Vierstellige Geheimnummer mit »1...0 « nocheinmal eingeben.
6 Zeile »Kindersicherung« mit » , « oder » .« anwählen und mit » Ƿ «
DEUTSCH
/
K
aktivieren.
37
KINDERSICHERUNG __________________________________________________________________ Ö P
K
(
I
R
k
2
1
off
no
off
/
1
O
Zugriffskontrolle
Kindersicherung
Statusfenster
Sicherungsstufe
Öko-Standby
Land ändern
>
>
D aS
F
Kode ändern
U Ü
7 Das Symbol » D« mit » , « oder » .« anwählen. 8 Einstellung mit »OSD« beenden. – Der DVD-Player ist verriegelt. Hinweis: Wird jetzt eine DVD oder Video-CD in die Schublade gelegt, erscheint die Meldung »locked« (gesperrt) und Sie müssen die vierstellige Geheimnummer eingeben.
Kindersicherung des DVD-Players abschalten Ö P
K
(
I
R
k
2
1
off
no
off
D
/
1
O
Zugriffskontrolle
Kindersicherung
Statusfenster
Sicherungsstufe
Öko-Standby
Land ändern
>
>
aA
F
Kode ändern
U Ü
1 Zum Abschalten der Kindersicherung die Punkte 1 bis 8 im Kapitel „Kindersicherung des DVD-Players aktivieren“ wiederholen und das Symbol » F« mit » , « oder » .« anwählen. – Die Kindersicherung ist abgeschaltet. Hinweis: Falls Sie die Geheimnummer vergessen oder verlegt haben: Anstelle der Geheimnummer die Taste » ■ « viermal drücken.
Geheimzahl ändern Ö P
K
(
I
R
k
2
1
off
no
off
/
1
O
Zugriffskontrolle
Kindersicherung
Statusfenster
Sicherungsstufe
Öko-Standby
Land ändern
> U Ü
Kode ändern
>
A S
s
( ( ( (
) ) ) )
1 Zum Ändern der Geheimzahl die Punkte 1 bis 5 im Kapitel „Kindersicherung des DVD-Players aktivieren“ wiederholen.
2 Zeile »Kode ändern« mit » , « oder » .« anwählen und mit » Ƿ « aktivieren.
3 Neue vierstellige Geheimnummer mit »1...0 « eingeben. Vierstellige Geheimnummer mit »1...0 « noch einmal eingeben.
38 GRUNDIG Service
4 Einstellung mit »OSD« beenden.
1 - 13
Allgemeiner Teil / General Section
GDV200
KINDERSICHERUNG __________________________________________________________________ DVD oder Video-CD für die Wiedergabe freigeben Benutzung des DVD-Players zulassen Wenn die Kindersicherung aktiviert ist, erscheint am Bildschirm das Menü »Zugriffskontrolle«. Sie können wählen, ob die DVD oder Video-CD nur einmal oder uneingeschränkt abgespielt werden kann. Wenn Sie die Funktion »Immer wiedergeben« wählen, wird die DVD oder Video-CD in einer „Liste“ gespeichert und die Wiedergabe dieser DVD oder Video-CD ist nicht eingeschränkt. In dieser „Liste“ können maximal 50 DVDs oder Video-CDs aufgenommen werden. locked G S
Zugriffskontrolle
Einmal wiedergeben Immer wiedergeben
1 DVD oder Video-CD in die Schublade einlegen. – Am Bildschirm erscheint das Menü »Zugriffskontrolle«.
() () () () () () () ()
‘Immer wiedergeben‘ wählen, um die Disk in die Kinderliste aufzunehmen
2 Zeile »Einmal wiedergeben« mit » , « oder » .« (für den einmaligen Gebrauch) anwählen, oder Zeile »Immer wiedergeben« mit » , « oder » .« anwählen.
locked G S
Zugriffskontrolle
Einmal wiedergeben Immer wiedergeben
3 Vierstellige Geheimnummer mit »1...0 « eingeben.
• • • () () () () ()
– Die Wiedergabe startet automatisch.
‘Immer wiedergeben‘ wählen, um die Disk in die Kinderliste aufzunehmen
Die Funktion »Immer wiedergeben« abschalten 1 DVD oder Video-CD in die Schublade einlegen. – Die Wiedergabe beginnt automatisch.
– Die Berechtigung, diese DVD oder Video-CD immer wiederzugeben, ist aufgehoben.
DEUTSCH
2 Taste »7« drücken, während »H« eingeblendet wird.
39
KINDERSICHERUNG __________________________________________________________________ Inhalt der DVD autorisieren DVDs können Spielfilme anbieten, deren Inhalt oder auch Szenen nicht für Kinder geeignet sind. Diese DVDs enthalten Informationen, die diesen Inhalt oder diese Szenen markieren und sind mit Kennzahlen von 1 bis 8 versehen. Sie können eine der Kennzahlen anwählen und damit alternative Szenen zur Wiedergabe autorisieren. Ö P / O
1 S
>
K
(
I
R
k
2
1
off
no
off
Zugriffskontrolle
s
>
2 Menüpunkt »Ö« (Einstellungen) mit » Ǹ « oder » Ƿ « anwählen und mit
Kode eingeben…
Statusfenster
Ein
Öko-Standby
Aus
»P – « aktivieren.
3 Zeile »Ü« (Sonderfunktionen) mit » .« auswählen und mit » Ƿ «
U Ü
aktivieren.
a
Ö P
K
(
I
R
k
2
1
off
no
off
/
1
O
Zugriffskontrolle
>
>
Statusfenster
()()()()
Öko-Standby
Kode eingeben
aktivieren.
5 Vierstellige Geheimnummer mit »1...0 « eingeben. 6 Zeile »Sicherungsstufe« mit » , « oder » .« anwählen und mit » Ƿ «
Ü
aktivieren.
Ö P
K
(
I
R
k
2
1
off
no
off 5
/
1
O
Zugriffskontrolle
Kindersicherung
Statusfenster
Sicherungsstufe
Öko-Standby
Land ändern
U
4 Zeile »Zugriffskontrolle« mit » , « oder » .« anwählen und mit » Ƿ «
a
U
>
1 Menüzeile mit »OSD« aufrufen.
>
A
a
S
7 Gewünschte Kennzahl (von 1 bis 8) mit » , « oder » .« anwählen. 8 Einstellung mit »OSD« beenden.
Kode ändern
Ü
40 1 - 14
GRUNDIG Service
GDV200
Allgemeiner Teil / General Section
KINDERSICHERUNG __________________________________________________________________ Land ändern Ö P /
1 S
O >
K
(
I
R
k
2
1
off
no
off
Zugriffskontrolle
s
>
Kode eingeben…
Statusfenster
Ein
Öko-Standby
Aus
2 Menüpunkt »Ö« (Einstellungen) mit » Ǹ « oder » Ƿ « anwählen und mit »P – « aktivieren.
3 Zeile »Ü« (Sonderfunktionen) mit » .« auswählen und mit » Ƿ «
U Ü
1 Menüzeile mit »OSD« aufrufen.
aktivieren.
a
Ö P
K
(
I
R
k
2
1
off
no
off
/
1
O
Zugriffskontrolle
>
>
4 Zeile »Zugriffskontrolle« mit » , « oder » .« anwählen und mit » Ƿ « aktivieren.
a
Statusfenster
()()()()
Öko-Standby
Kode eingeben
5 Vierstellige Geheimnummer mit »1...0 « eingeben.
U
6 Zeile »Land ändern« mit » , « oder » .« anwählen und mit » Ƿ «
Ü
aktivieren.
Ö P
K
(
I
R
k
2
1
off
no
off 5
/
1
O
Zugriffskontrolle
Kindersicherung
Statusfenster
Sicherungsstufe
Öko-Standby
Land ändern
>
>
8 Einstellung mit »OSD« beenden.
A
a
7 Gewünschtes Land mit » , « oder » .« anwählen.
S
Kode ändern
U
DEUTSCH
Ü
41
TONEINSTELLUNGEN
____________________________________________
Tonmenü anwählen Ö P
K
(
I
R
k
2
1
off
no
off
/
1
O
Digitalausgang
Aus
Analogausgang
Dolby Surround
Nachtmodus
Aus
Karaoke-Gesang
Aus
Lautsprecher
Einstellungen...
> U
A S8
>
1 Menüzeile mit »OSD« einblenden. 2 Menüpunkt »Ö« (Einstellungen) mit » Ǹ « oder » Ƿ « anwählen und mit »P – « aktivieren.
3 Zeile »> « (Tonmenü) mit » , « oder » .« wählen und mit » Ƿ « aktivieren.
Ü
Hinweis: Die weitere Bedienung entnehmen Sie bitte den folgenden Kapiteln, jeweils ab Pkt. 1.
Digital-/ oder Analogausgänge des DVD-Players an die angeschlossenen Audio-Geräte anpassen Ö P
K
(
I
R
k
2
1
off
no
off
/
1
O
Digitalausgang
> U
a
Aus
>
S
Analogausgang
Ein - Nur PCM
Nachtmodus
Ein - Alle Formate
1 Zeile »Digitalausgang« mit » , « oder » .« wählen und mit » Ƿ « akti-
Karaoke-Gesang Lautsprecher
vieren.
Ü
Ö P
K
(
I
R
k
2
1
off
no
off
/
1
O
Digitalausgang Analogausgang
> U Ü
Abhängig vom angeschlossenen Fernseh-/oder Audio-Gerät müssen Sie die Ausgangsbuchsen des DVD-Players und die Signalart anpassen. Die Einstellung führen Sie im »Tonmenü« (> ) durch, die benötigten Einstellungen entnehmen Sie der Tabelle.
a
>
2 Zeile »Analogausgang« mit » , « oder » .« wählen und mit » Ƿ «
Stereo
Nachtmodus
Dolby Surround
Karaoke-Gesang
Virt. Surround (3D)
Lautsprecher
Mehrkanal (6 ch)
Hinweis: Die benötigte Einstellung (siehe Tabelle) mit » , « oder » .« wählen.
A S
aktivieren.
Hinweis: Benötigte Einstellung (siehe Tabelle) mit » , « oder » .« wählen.
44
GRUNDIG Service
1 - 15
Allgemeiner Teil / General Section
GDV200
TONEINSTELLUNGEN________________________________________________________________
Angeschlossenes Fernseh-/ Audio-Gerät
Einstellung im Menü »> « (Ton) Digitalausgang Analogausgang
Fernsehgerät oder Verstärker mit analogem Zweikanal-Stereoton
»Aus«
»Stereo« oder »Virt. Surround (3D)«
Fernsehgerät oder Verstärker mit analogem Dolby Surround
»Aus«
»Dolby Surround«
Verstärker mit digitalem Zweikanal-Stereoton
»Ein-Nur PCM«
»Stereo«
Digitaler Verstärker mit MehrkanalDecoder (Dolby AC3, MPEG,DTS)
»Ein-Alle Formate« »Stereo«, »Dolby Surround«, »3D«
Mehrkanal-AV-Receiver mit analogem 6 Kanalanschluß
»Aus«
»Mehrkanal (6 ch)«
3 Menü mit »OSD« abschalten. Ö P ––
O >
a
a
U
(
I
R
k
off
no
off
–––
Digitalausgang
Aus
Analogausgang
Stereo
Nachtmodus
Aus
Karaoke-Gesang
Aus
Lautsprecher
Einstellungen…
a
/
K
>
Einstellung für Aktiv-Lautsprecher Abhängig von den angeschlossenen Lautsprechern und den Gegebenheiten des Aufstellortes müssen Sie die Ausgangskanäle des DVD-Players anpassen.
1 Zeile »Lautsprecher« mit » , « oder » .« wählen und mit » Ƿ «
Ü
aktivieren.
/
––
K
(
–––
I
R
k
off
no
off
>
Lautsprecher a
a
Vorne L & R Mitte
S
Hinten L Hinten R Subwoofer
L
Ende: OK drücken
S
2 Lautsprecher mit » , « oder » .« wählen. – Die gewählten Lautsprecher werden im Menü hervorgehoben. »Vorne L & R« »Mitte« »Hinten L« »Hinten R« »Subwoofer«
– – – – –
Frontlautsprecher; Centerlautsprecher; Surroundlautsprecher; Surroundlautsprecher; Basslautsprecher.
DEUTSCH
Ö P
45
TONEINSTELLUNGEN________________________________________________________________ 3 Benötigte Einstellung mit » Ǹ « oder » Ƿ « anwählen und Lautsprecher mit Ö P /
––
aa
♦
S L
♦
0dB
S
0ms
Subwoofer Ende: OK drücken
ѕ
a
Mitte Hinten L
(
–––
u
Vorne L & R
Hinten R
K
I
R
k
off
no
off
>
Lautsprecher
» , « oder » .« anpassen:
– Lautstärke einstellen; » u« » L« (groß) – die Lautsprecher sind für Tonsignale unter 120 Hz geeignet; » S« (klein) – die Lautsprecher sind nicht für Tonsignale unter 120 Hz geeignet; »On« (ein) – Center-/Surround-Lautsprecher oder ein Subwoofer sind angeschlossen; »Off« (aus) – Center-/Surround-Lautsprecher oder ein Subwoofer sind nicht angeschlossen; » « – Verzögerungszeit einstellen.
ѕ
Hinweis: Wie Sie den Wert für die Verzögerungszeit ermitteln, ist im nächsten Kapitel beschrieben.
4 Einstellung mit »OK« speichern. 5 Menü mit »OSD« abschalten.
Verzögerungszeit ermitteln Der DVD-Player ist werkseitig auf die Wiedergabe von korrekt synchronisierten Digital-Surround-Sound eingestellt. Der Hörbereich ist so definiert, dass sich die Surround-Lautsprecher ca. 150 cm näher an der Mittenposition des Hörers befinden wie die Frontlautsprecher, der Centerlautsprecher befindet sich auf einer Linie mit den Frontlautsprechern. Wenn Sie die Position der Lautsprecher ändern, müssen Sie auch die Verzögerungszeit anpassen. Wählen Sie die Einstellung, die dem ausgerechneten Wert am nächsten kommt.
46 1 - 16
GRUNDIG Service
GDV200
Allgemeiner Teil / General Section
TONEINSTELLUNGEN________________________________________________________________ Verzögerungszeit für Digital Surround Die Abstände bestimmen Sie jeweils in Zentimeter. Messen Sie den Abstand von den Frontlautsprechern und den Surround-Lautsprechern zu der Mittenposition des Hörers. Den Abstand der Surround-Lautsprecher von dem Abstand der Frontlautsprechern subtrahieren und diesen Wert durch 30 dividieren. Das Ergebnis ist die erforderliche Verzögerungszeit für den Surroundkanal in Millisekunden. Beispiel: Abstand der Frontlautsprecher 180 cm – Abstand der Surround-Lautsprecher 120 cm = 060 cm 60 cm : 30 = 2 Millisekunden Wenn sich der Centerlautsprecher auf einer Linie mit den Frontlautsprechern befindet, ist hierfür keine Einstellung notwendig. Wenn sich der Centerlautsprecher näher zur Mittenposition des Hörers befindet, den Abstand von Frontlautsprechern zu Centerlautsprecher messen und das Ergebnis durch 30 dividieren. Das Ergebnis ist die erforderliche Verzögerungszeit für den Centerkanal in Millisekunden.
DEUTSCH
Verzögerungszeit für Dolby Surround Bei Dolby Surround werden zu der Verzögerungszeit für den Surroundkanal 15 Millisekunden addiert. Wird auch der Centerkanal eingeschaltet, werden auch hier zur Verzögerungszeit für den Centerkanal 15 Millisekunden addiert.
47
TONEINSTELLUNGEN________________________________________________________________ Nachtmodus ein-/ausschalten Ö P
K
(
I
R
k
2
1
off
no
off
/
1
O
Digitalausgang
>
U
1 Zeile »Nachtmodus« mit » , « oder » .« wählen und mit » Ƿ « aktivieren.
Analogausgang
>
Diese Funktion optimiert die Klangdynamik bei geringer Wiedergabe-Lautstärke.
Nachtmodus
a
Ein Aus
Karaoke-Gesang
2 Nachtmodus mit » , « oder » .« Ein-/oder Ausschalten.
A
Lautsprecher
Ü
3 Menü mit »OSD« abschalten.
Karaoke-Gesang ein-/ausschalten Ö P
K
(
I
R
k
2
1
off
no
off
/
1
O
Digitalausgang
>
1 Zeile »Karaoke-Gesang« mit » , « oder » .« wählen und mit » Ƿ «
Analogausgang
> U Ü
aktivieren.
Nachtmodus Karaoke-Gesang Lautsprecher
Schalten Sie diese Funktion ein, wenn eine DVD mit Mehrkanal-KaraokeGesang wiedergegeben wird.
a
Ein Aus
A
2 Karaoke-Gesang mit » , « oder » .« Ein-/oder Ausschalten. 3 Menü mit »OSD« abschalten.
48 GRUNDIG Service
1 - 17
Allgemeiner Teil / General Section
GDV200
BILDEINSTELLUNGEN
_____________________________________________
Bildmenü anwählen 1 Menüzeile mit »OSD« einblenden. Ö P / O
1 A S8
>
K
(
I
R
k
2
1
off
no
off
Bildformat
16:9
Schwarzwert
Ein
Bildverschiebung
U Ü
>
2 Menüpunkt »Ö« (Einstellungen) mit » Ǹ « oder » Ƿ « anwählen und mit »P – « aktivieren.
3 Zeile »O« (Bildmenü) mit » , « oder » .« wählen und mit » Ƿ « aktivieren.
■■ ■■■■■ ■
Farbeinstellungen
1 Persönlich
Persönliche Farbwerte
Einstellungen...
Hinweis: Die weitere Bedienung entnehmen Sie bitte den folgenden Kapiteln, jeweils ab Pkt. 1.
Format des Fernsehgerätes anpassen Haben Sie ein Fernsehgerät mit dem Bildformat 16:9, dann wählen Sie die Einstellung 16:9. Bei einem herkömmlichen Fernsehgerät (Bildformat 4:3) können Sie wählen: – »4:3 Letterbox« für eine Breitbild-Wiedergabe mit schwarzen Balken am oberen und unteren Bildschirmrand des Fernsehgerätes, oder – »4:3 Pan Scan« für eine Breitbild-Wiedergabe vergrößert auf volle Bildschirmhöhe, bei der der linke und rechte Rand des Bildes beschnitten ist.
O
1 A S8
>
K
(
I
R
k
2
1
off
no
off
Bildformat
16:9
Schwarzwert
Ein
Bildverschiebung
U Ü
>
1 Zeile »Bildformat« mit » , « oder » .« wählen und mit » Ƿ « aktivieren. 2 Benötigtes Bildformat » 16:9« oder » 4:3 Pan Scan« oder » 4:3 Letterbox« mit » , « oder » .« wählen.
■■ ■■■■■ ■
Farbeinstellungen
1 Persönlich
Persönliche Farbwerte
Einstellungen...
3 Menü mit »OSD« abschalten.
DEUTSCH
Ö P /
49
BILDEINSTELLUNGEN ________________________________________________________________ Schwarzwerteinstellung (nur für NTSC-Sendungen) Diese Einstellung paßt die Farbdynamik an, damit wird ein besserer Bildkontrast erzielt. Ö P / O
1 A S8
>
K
(
I
R
k
2
1
off
no
off
Bildformat
16:9
Schwarzwert
Ein
Bildverschiebung
U Ü
>
1 Zeile »Schwarzwert« mit » , « oder » .« wählen und mit » Ƿ « aktivieren.
2 Funktion mit » , « oder » .« ein-/ oder ausschalten.
■■ ■■■■■ ■
Farbeinstellungen
1 Persönlich
Persönliche Farbwerte
Einstellungen...
3 Menü mit »OSD« abschalten.
Bildlage einstellen In der Werkseinstellung wird das Bild auf dem Bildschirm zentriert. Mit dieser Einstellung können Sie die Bildlage auf Ihrem Fernsehgerät nach links oder nach rechts verschieben. Ö P / O > U Ü
1 A S8
K
(
I
R
k
2
1
off
no
off
Bildformat
16:9
Schwarzwert
Ein
Bildverschiebung
>
1 Zeile »Bildverschiebung« mit » , « oder » .« wählen und mit » Ƿ « aktivieren.
2 Bildlage mit » Ǹ « oder » Ƿ « verschieben und mit »OK« speichern.
■■ ■■■■■ ■
Farbeinstellungen
1 Persönlich
Persönliche Farbwerte
Einstellungen...
3 Menü mit »OSD« abschalten.
50 1 - 18
GRUNDIG Service
GDV200
Allgemeiner Teil / General Section
BILDEINSTELLUNGEN ________________________________________________________________ Farbeinstellungen Mit dieser Funktion können Sie das Wiedergabebild nach vordefinierten Werten (Farbstärke, Helligkeit, Kontrast) einstellen. Ö P / O
K
(
I
R
k
2
1
off
no
off
1 A S8
>
Bildformat
16:9
Schwarzwert
Ein
Bildverschiebung
U Ü
>
1 Zeile »Farbeinstellungen« mit » , « oder » .« wählen und mit » Ƿ « aktivieren.
2 Gewünschte Einstellung mit » , « oder » .« wählen.
■■ ■■■■■ ■
Farbeinstellungen
1 Persönlich
Persönliche Farbwerte
Einstellungen...
3 Menü mit »OSD« abschalten.
Persönliche Farbe Mit dieser Funktion können Sie Ihre persönliche Einstellung für Farbstärke, Helligkeit, Kontrast wählen. Ö P / O
K
(
I
R
k
2
1
off
no
off
1 A S8
>
Bildformat
16:9
Schwarzwert
Ein
Bildverschiebung
U Ü
>
1 Zeile »Persönliche Farbwerte« mit » , « oder » .« wählen und mit » Ƿ « aktivieren.
2 Gewünschte Einstellung (Sättigung, Helligkeit, Kontrast) mit » , « oder » .« wählen und mit »
■■ ■■■■■ ■
Farbeinstellungen
1 Persönlich
Persönliche Farbwerte
Einstellungen...
Ƿ « aktivieren.
3 Sättigung, Helligkeit oder Kontrast mit » , « oder » .« einstellen und mit »OK « speichern.
DEUTSCH
4 Menü mit »OSD« abschalten.
51
KOMFORTEINSTELLUNGEN
____________________________
Sprachmenü anwählen Ö P
K
(
I
R
k
2
1
off
no
off
/
1
O
Audio (Dialoge)
Deutsch
Untertitel
Deutsch
Menü
Deutsch
> U
>
1 Menüzeile mit »OSD« einblenden. 2 Menüpunkt »Ö« (Einstellungen) mit » Ǹ « oder » Ƿ « anwählen und mit » .« aktivieren.
3 Zeile »M« (Sprachmenü) mit » , « oder » .« wählen und mit » Ƿ «
A S8
aktivieren.
Ü
Hinweis: Die weitere Bedienung entnehmen Sie bitte den folgenden Kapiteln, jeweils ab Pkt. 1.
Synchronsprache des Tons wählen
Ö P
K
(
I
R
k
2
1
off
no
off
/
1
O
Audio (Dialoge)
>
a
Deutsch
Untertitel
Español
Menü
Français
>
Wenn auf der eingelegten DVD mehrere Sprachen zur Verfügung stehen, wird der Ton in der von Ihnen gewählten Sprache wiedergegeben. Ist die gewählte Synchronsprache auf der DVD nicht vorhanden, schaltet der DVD-Player auf die erste Synchronsprache der DVD.
1 Zeile »Audio (Dialog)« mit » , « oder » .« wählen und mit » Ƿ «
S
aktivieren.
U
2 Gewünschte Synchronsprache mit » , « oder » .« wählen.
Ü
3 Menü mit »OSD« abschalten. Ö P
K
(
I
R
k
2
1
off
no
off
/
1
O
Audio (Dialoge)
>
Untertitel
> U
Menü
a
Deutsch Español Français
S
Sprache der Bildschirmmenüs des DVD-Players wählen 1 Zeile »Menü« mit » , « oder » .« wählen und mit » Ƿ « aktivieren. 2 Gewünschte Sprache der Bildschirmmenüs mit » , « oder » .« wählen.
Ü
52
GRUNDIG Service
3 Menü mit »OSD« abschalten.
1 - 19
Allgemeiner Teil / General Section
Operating Hints
GDV200
This chapter contains excerpts from the user manual. For further particulars please refer to the appropriate user manual the part number of which is indicated in the relevant spare parts list.
DVD/VIDEO CD PLAYBACK _____________________________________________________ Calling up the function display .
8
DVD
play
Each function you have selected (for example, running time, current title etc.) can be displayed on the screen.
1 Press the »OSD« button to call up the function display.
2 : 04 : 26 0 : 15 : 00
2 To hide the function display, press »OSD« again.
Playing back a title When you close the disc tray, playback starts automatically.
.
8
DVD
play
1 To pause playback (freeze-frame), press »I I «. 2 Resume playback by pressing »8«.
2 : 04 : 26 0 : 11 : 30
3 To end playback, press »7«. Note: Depending on the DVD or video CD you are using, you may have to select a title or chapter from the DVD or video CD’s table of contents. Use the » , « or » .« button to select it and then press »OK« to confirm. If the selections are numbered, use the »1 ... 0 « keys.
22
OVERVIEW __________________________________________________________________________________ The back of the DVD player
MULTICHANNEL AUDIO OUT LEFT REAR
CENTER
I
LEFT FRONT
DIGITAL AUDIO OUT
AUX/VCR IN STEREO OUT
PCM/MPEG2/AC3/DTS
VIDEO OUT
MAINS
II TV OUT
OPT OUT
DIG OUT
RIGHT REAR
SUBW.
RIGHT FRONT
L R AUDIO OUT
~ MAINS
(CVBS) VIDEO OUT
(Y/C) S-VIDEO OUT
Socket for mains cable
Digital audio connections (PCM/MPEG2/AC3/DTS) OPT OUT
Audio output socket (optical), for connecting to a digital HiFi system using a standard OPTICAL cable.
DIG OUT
Audio output socket, for connecting to a digital HiFi system.
1 - 20
LEFT REAR RIGHT REAR
Audio output sockets for connecting to Surround loudspeakers.
CENTER
Audio output socket for connecting to a middle loudspeaker.
SUBW.
Audio output socket for connecting to a subwoofer.
LEFT FRONT
Audio output sockets for connecting to
RIGHT FRONT
front loudspeakers.
ENGLISH
Multichannel connections (MULTICHANNEL AUDIO OUT)
9 GRUNDIG Service
GDV200
Allgemeiner Teil / General Section
OVERVIEW __________________________________________________________________________________ Audio and video connections STEREO OUT R AUDIO OUT ■ L ■
Audio output sockets (right/left channel), for connecting to a HiFi system.
VIDEO OUT (CVBS) VIDEO OUT
Video output socket, for connecting to a television with a video socket.
(Y/C) S-VIDEO OUT
Video output socket, for connecting to a television with an S-VHS socket.
I AUX/VCR IN ■
Audio/video input/output socket, for connecting a video recorder.
II ■
Video/audio output socket for connecting to a television.
TV OUT
Caution: Do not connect any devices while the DVD player is switched on. Never touch the inside of the sockets and plugs of the connecting cables. An electrostatic discharge can damage the DVD player.
10
OVERVIEW __________________________________________________________________________________ The remote control TE L E PI L O T
Using the TP 80 V remote control you can not only operate the DVD player, but also Grundig televisions, video recorders and satellite receivers.
80V
1
2
3
4
5
6
7
8
9
DVD TV
To operate the DVD player, push the »DVD TV VCR EXT« switch to the »DVD« position. The yellow LED briefly lights up.
VCR EXT
9
Switches the DVD player to and from Stand-by mode. The LED around the button on the DVD player indicates the current operating status: Red – Stand-by; Green – On.
0
1 ... 0 P
OK P MUTE TV-GUIDE
TXT
MENU
OSD
SUBTITLE
RECORD
VCR-MENU
SHOWVIEW
SHUFFLE
REPEAT
FORMAT
,.
Select various functions in the menus. Confirms menu entries.
F E
During playback, switch the video search forwards or backwards at different speeds. Select various menu functions.
7
Terminates all functions, switches the DVD player to ”STOP”.
%
Slow motion for DVDs and video CDs.
II
Freeze-frame for DVDs and video CDs; Pause for audio CDs.
8
Starts playback; when pressed twice activates the ”Resume” function.
RETURN
AUX
ENGLISH
PIP
ANGLE
Numeric keys for various inputs.
OK
AUDIO
VOL
AV
11 GRUNDIG Service
1 - 21
Allgemeiner Teil / General Section
GDV200
OVERVIEW __________________________________________________________________________________
TE L E PI L O T
80V
1
2
3
4
5
6
7
8
9
MENU
Calls up the DVD/video CD title menu during playback.
OSD
Displays/conceals the menus on the television screen.
SUBTITLE
Displays subtitles during DVD playback.
AUDIO
Switches between the original and the dubbed language during DVD playback.
– VOL +
Increases/reduces volume on GRUNDIG televisions with TP 590 remote control or later.
5a
When pressed briefly during playback select the next or previous title or chapter;
DVD TV VCR EXT
0
s6
when pressed longer activates the forwards or backwards picture search.
P
OK P
SHUFFLE
Plays back all titles on a DVD or CD in random order.
ANGLE
Selects various camera angles for certain scenes or passages on the DVD during playback.
REPEAT
Repeats chapters or titles, DVDs or CDs during playback.
RETURN
Returns to the previous DVD menu.
MUTE TV-GUIDE
TXT
MENU
OSD
SUBTITLE
RECORD
VCR-MENU
SHOWVIEW
AUDIO
VOL
SHUFFLE
ANGLE
PIP
REPEAT
RETURN
FORMAT
AUX
Note: For details on operating Grundig televisions, video recorders and satellite receivers, see Page 54 onwards.
12
THE OSD MENU
__________________________________________________________
The OSD menu – which is displayed on the television screen – enables you to select any function and carry out the necessary settings. Icons, buttons and dialog lines indicate the available options.
The menu line 1 Press »OSD« to call up the menu line, and » Ƿ « to scroll to the right. – The illustrations show the options presented by the menu line.
Ö
P a
/
K
(
I
R
k
2
1
off
no
off
s
1
A S
»Ö«
= »Settings« menu.
»P«
= Select title.
»K«
= Select chapter.
»(«
= Select audio track.
>
»I« = Select subtitles language. »R« = Select camera angle. »k«
U
TV Shape
16:9
Black level shift
On
Video shift
>
»O« =
»Picture menu« containing the following functions: – TV Shape, – Black level shift, – Video shift, – Colour settings, – Personal colour.
»>« =
»Sound menu« containing the following functions: – Digital output, – Analogue output, – Night mode, – Karaoke vocal, – Speakers.
»U« =
»Language menu« containing the following functions: – Audio, – Subtitle, – Menu.
»Ü«
»Special functions« menu containing the following functions: – Access control, – Status window, – Low power standby.
■■ ■■■■■ ■
Colour settings
1 Personal
Personal colour
Settings...
Ü
=
The dialog line The dialogue line displays information about the operating condition.
Ö /
a
P
»
1
» » »
14
»
x
locked G
safe H
2/2 R
resume %
«
=
Function not available.
«
=
Parental lock activated.
«
=
Parental lock off.
«
=
Camera angle for scenes.
«
=
Playback resumed.
THE OSD MENU _________________________________________________________________________ » » » » »
repeat p
title p
chapter p
track p
shuffle
«
=
Repeating DVDs/CDs.
«
=
Repeating titles.
«
=
Repeating chapters.
«
=
Repeating tracks.
«
=
Titles selected and played back at random.
The status display .
!
The status display shows information on the current DVD or video CD, the total running time and the elapsed running time of the DVD or video CD.
DVD
pause
»2 : 05 : 30«
= Total running time.
2 : 04 : 26 0 : 00 : 21
»0 : 15 : 00«
= Elapsed running time.
The current function is also displayed: ». DVD«
= Video CD inserted.
», reading«
= Reading DVD.
»{ no disc«
= No DVD or video CD inserted.
»] opened«
= Disc compartment open.
»[ closing«
= Disc compartment closed.
» ! error«
= Error message.
»8 play«
= Playback.
»7 stop«
= End playback.
ǵ
»I I pause« »E
&
»&
W
= Pause playback. x 4 x 32«
1/8 1/4 1/2«
= Video search forwards/backwards. = Slow motion forwards/backwards.
ENGLISH
= DVD inserted.
». VCD«
15 GRUNDIG Service
1 - 23
Allgemeiner Teil / General Section
GDV200
THE OSD MENU _________________________________________________________________________ Using the OSD menu The following example shows how the OSD menu is structured and how to select the various menus and settings.
P
Press the »OSD« button to select the menu line, then select individual menu items with the » , « or » .«, » Ǹ « or » Ƿ « buttons.
OK
The active menu item is highlighted in blue. Menu items which have no function on the current DVD are greyed out and cannot be selected.
P MUTE
Ö P /
a
A
1S
s
Ö P
To scroll along the menu line press » Ƿ «.
K
(
I
R
k
2
1
off
no
off
K
(
I
R
k
2
1
off
no
off
/
1
O
Audio
English
Subtitle
English
Menu
English
> U
>
>
Ö P /
1
K
(
I
R
k
2
1
off
no
off
Audio
» Ƿ « and then press » .« to activate it. – The main menu is displayed.
>
4 Select the function (in the example, »Subtitle«) by pressing » , « or » .« and then press » Ƿ « to activate it.
English
A S
>
2 Select the required menu item (in the example, »Ö«) by pressing » Ǹ « or
» .« and then press » Ƿ « to open it. – The language menu is displayed.
Ü
U
– The menu line is displayed.
3 Select the desired menu (in the example, »U«) by pressing » , « or
A S8
O
1 Press »OSD« to call up the menu line.
Subtitle
English
Menu
English
5 Select desired setting using the » , « or » .« buttons.
a
Note: You can switch back to the previous menus and menu items by pressing »OK«.
Ü
6 To exit the menu line press the »OSD« button. – The functions or values you set are automatically saved.
16
DVD/VIDEO CD PLAYBACK _____________________________________________________ Before playback Preparation 1 Switch on the television and select the channel for the DVD player. 2 Switch on the HiFi system and select the audio input for the DVD player. 3 Press »ON/OFF« to switch the DVD player on. – The DVD player display reads: »N O D I S C «
VCD
TITLE CHAPTER TRACK SCAN REPEAT SHUFFLE
TOTAL TRACK TIME CHAPTER
TITLE TRACK
Inserting a DVD/video CD 1 Press »OPEN/CLOSE« on the DVD player. – The disc tray opens.
2 Insert the DVD/video CD into the compartment, with the labelling facing upwards.
3 Press »OPEN/CLOSE«, or
7
reading
stop
- : -- : -- : -- : --
gently push the front of the disc tray. – The status display reads: », reading« and » , R E A D « appears on the DVD player, playback starts automatically. – After a short time a menu appears containing information on the DVD. Note: If the parental control lock is activated and the DVD/video CD has not been authorised (see the chapter entitled ”PARENTAL CONTROL SYSTEM”), you must enter the code number.
ENGLISH
,
21 1 - 24
GRUNDIG Service
GDV200
Allgemeiner Teil / General Section
DVD/VIDEO CD PLAYBACK _____________________________________________________ Selecting titles or chapters ... If a DVD or video CD contains several titles and/or chapters, you can select from among them.
... using the menu of the DVD player 1 Display the menu line by pressing »OSD«. Ö P /
a
A 1S
Ö P /
1
Ö P /
a
A 2S
s
a
s
K
(
I
R
k
2
1
off
no
off
(
I
R
k
1
off
no
off
K
(
I
R
k
2
1
off
no
off
K A 2S
s
>
>
>
2 Select »P« (for title) using » Ǹ « or » Ƿ «, or
select »K« (for chapter) using » Ǹ « or » Ƿ «.
3 Select the next title or chapter by pressing » , « or » .«. Note: You can also select titles or chapters directly by entering the number of the title or chapter using »1 ... 0 «.
... using the title menu of the DVD/video CD The title menu of the DVD/video CD may contain selection options for titles, sections or scenes.
1 Call up the contents of the DVD/video CD by pressing »MENU«. – If the DVD/video CD has a title menu it will appear on the screen.
2 If the selection options are numbered, select the desired title and section 3 If the selection options are not numbered, select the titles and scenes using » , « or » .« and then press »OK« to confirm.
ENGLISH
using »1 ... 0 «.
23
PARENTAL CONTROL SYSTEM
_____________________
The parental control system enables you to: – Prevent the DVD player from being used; – Release or block particular DVDs or video CDs for playback; – Block scenes which are not appropriate for children from DVDs or video CDs, or select alternative scenes.
Activating and switching off the DVD player’s parental control system Activating the child lock of the DVD player Ö P
O
1 S Access
>
(
I
R
k
2
1
off
no
off
control
s
>
2 Select the »Ö« item (Settings) using » Ǹ « or » Ƿ « and press » .« to
Enter code…
Status window
On
Low power standby
Off
confirm.
3 Select the »Ü« line (Special functions) using » .« and press » Ƿ « to
U Ü
confirm.
a
Ö P
K
(
I
R
k
2
1
off
no
off
/
1
O
Access control
> U Ü
1 Call up the menu line by pressing » OSD AUX«.
a
Status window
()()()()
Low power standby
Enter code
>
4 Select the »Access control« line using » , « or » .« and press » Ƿ « to confirm.
5 Enter the four-digit code number using the »1...0 « buttons. Note: When the code number is entered for the first time, the display changes to »Confirm code«. Enter the four-digit code number again using the »1...0 « buttons.
6 Select the »Child lock« line using » , « or » .« and confirm by pressing » Ƿ «.
GRUNDIG Service
ENGLISH
/
K
37 1 - 25
Allgemeiner Teil / General Section
GDV200
PARENTAL CONTROL SYSTEM ________________________________________________ Ö P
K
(
I
R
k
2
1
off
no
off
/
1
O
Access control
Child lock
Status window
Parental level
Low power standby
Change country
>
>
D aS
F
Change code
U Ü
7 Select the » D« icon using » , « or » .«. 8 Press »OSD« to conclude the setting. – The DVD player is locked. Note: If a DVD or video CD is now inserted in the disc tray, the message »locked« appears and the four-digit code number must be entered.
Deactivating the parental control system of the DVD player Ö P
K
(
I
R
k
2
1
off
no
off
/
1
O
Access control
Child lock
Status window
Parental level
Low power standby
Change country
>
>
D aA
F
Change code
U Ü
1 To de-activate the parental control system, repeat steps 1 to 8 from the section entitled ”Activating the parental control system of the DVD player” and select the » F« item by pressing » , « or » .«. – The parental control system is de-activated. Note: If you forget or lose the code number: Instead of entering the code number, press the » ■ « key four times.
Changing the code number Ö P
K
(
I
R
k
2
1
off
no
off
/
1
O
Access control
Child lock
Status window
Parental level
Low power standby
Change country
>
Change code
U Ü
>
A S
s
( ( ( (
) ) ) )
1 To change the code number, repeat steps 1 to 5 from the section entitled ”Activating the parental control system of the DVD player”.
2 Select the »Change code« line using » , « or » .« and confirm by pressing » Ƿ «.
3 Enter the new four-digit code number using the »1...0 « buttons. Enter the four-digit code number again using the »1...0 « buttons.
4 Press »OSD« to conclude the setting.
38
PARENTAL CONTROL SYSTEM ________________________________________________ Enabling a DVD or video CD for playback Permitting use of the DVD player When the parental control system is activated, the »Access control« menu appears on the screen. You may choose if you want the DVD or video CD to be played once only or unrestrictedly. If you select the »Play always« function, the DVD or video CD is saved in a list and playback of this DVD or video CD is unlimited. Up to 50 DVDs or video CDs can be saved in this list. locked G S
Play one Play always
Access control () () () () () () () ()
Choose ‘Play always‘ to insert the disc in the child-safe list
1 Insert the DVD or video CD in the disc tray. – The »Access control« menu is displayed on the screen.
2 Select the »Play one« line using » , « or » .« (for once-only playback), or select the »Play always« line using » , « or » .«.
locked G S
Play one Play always
Access control • • • () () () () ()
3 Enter the four-digit code number using the »1...0 « buttons. – Playback starts automatically.
Choose ‘Play always‘ to insert the disc in the child-safe list
De-activating the »Play always« function 1 Insert the DVD or video CD in the disc tray. – Playback starts automatically.
2 Press the »7« button, while the »H« icon is visible.
ENGLISH
– Permission to play back this DVD or video CD is revoked.
39 1 - 26
GRUNDIG Service
GDV200
Allgemeiner Teil / General Section
PARENTAL CONTROL SYSTEM ________________________________________________ Authorising the contents of a DVD Films on DVD may be wholly or partially unsuitable for children. Such DVDs contain information which identifies these scenes, providing them with ratings from 1 to 8. You can select one of the ratings and thereby authorise alternative scenes for playback. Ö P / O
1 S
>
K
(
I
R
k
2
1
off
no
off
Access control
>
2 Select the »Ö« item (Settings) using » Ǹ « or » Ƿ « and press »P – « to
Enter code…
s
Status window
On
Low power standby
Off
confirm.
3 Select the »Ü« line (Special functions) using » .« and press » Ƿ « to
U Ü
confirm.
a
Ö P
K
(
I
R
k
2
1
off
no
off
/
1
O
Access control
>
>
4 Select the »Access control« line using » , « or » .« and press » Ƿ « to confirm.
a
Status window
()()()()
Low power standby
Enter code
5 Enter the four-digit code number using the »1...0 « buttons.
U
6 Select the »Parental level« line using » , « or » .« and activate by pressing » Ƿ «.
Ü
Ö P
K
(
I
R
k
2
1
off
no
off
/
1
O
Access control
Child lock
Status window
Parental level
Low power standby
Change country
>
1 Call up the menu line by pressing »OSD«.
>
5 A
a
7 Select the rating (from 1 to 8) using » , « or » .«. 8 Conclude the setting by pressing »OSD«.
S
Change code
U Ü
40
USING EXTERNAL DEVICES _____________________________________________________ Connecting to an analog multi-channel audio/video amplifier
MULTICHANNEL AUDIO OUT LEFT REAR
CENTER
LEFT FRONT
RIGHT REAR
SUBW.
RIGHT FRONT
DIGITAL AUDIO OUT
I AUX/VCR IN STEREO OUT
PCM/MPEG2/AC3/DTS
VIDEO OUT
MAINS
II
Your DVD player has an integrated multi-channel decoder. This enables you to play DVDs which use the multi-channel surround system. A decoder is not necessary. The connection is made at the »MULTICHANNEL AUDIO OUT« sockets.
TV OUT
OPT OUT
DIG OUT
L R AUDIO OUT
(CVBS) VIDEO OUT
(Y/C) S-VIDEO OUT
1 Plug a standard cinch cable into the »LEFT FRONT« and »RIGHT FRONT« sockets on the DVD player and the appropriate sockets on the amplifier for the front loudspeaker. MULTICHANNEL AUDIO OUT LEFT REAR
CENTER
LEFT FRONT
RIGHT REAR
SUBW.
RIGHT FRONT
DIGITAL AUDIO OUT
I AUX/VCR IN STEREO OUT
PCM/MPEG2/AC3/DTS
VIDEO OUT
MAINS
II TV OUT
OPT OUT
DIG OUT
L R AUDIO OUT
(CVBS) VIDEO OUT
(Y/C) S-VIDEO OUT
2 Plug a standard cinch cable into the »LEFT REAR« and »RIGHT REAR« sockets on the DVD player and the appropriate sockets on the amplifier for the surround loudspeakers.
MULTICHANNEL AUDIO OUT LEFT REAR
CENTER
LEFT FRONT
RIGHT REAR
SUBW.
RIGHT FRONT
DIGITAL AUDIO OUT
I AUX/VCR IN STEREO OUT
PCM/MPEG2/AC3/DTS
VIDEO OUT
MAINS
II TV OUT
OPT OUT
DIG OUT
L R AUDIO OUT
(CVBS) VIDEO OUT
(Y/C) S-VIDEO OUT
3 Plug a standard cinch cable into the »CENTER« socket on the DVD player and the appropriate socket on the amplifier for the middle loudspeaker.
4 Plug a standard cinch cable into the »SUBW.« socket on the DVD player MULTICHANNEL AUDIO OUT LEFT REAR
CENTER
I
LEFT FRONT
DIGITAL AUDIO OUT
AUX/VCR IN STEREO OUT
PCM/MPEG2/AC3/DTS
VIDEO OUT
MAINS
II
and the appropriate socket on the amplifier for the subwoofer. – If the subwoofer is equipped with its own amplifier, then use that socket.
TV OUT
OPT OUT
DIG OUT
RIGHT REAR
SUBW.
RIGHT FRONT
L R AUDIO OUT
(CVBS) VIDEO OUT
(Y/C) S-VIDEO OUT
ENGLISH
Note: Suitable sound settings must be selected on the DVD player. When doing this, observe the settings in the chapter entitled ”Adapting the digital or analog outputs on the DVD players to connected audio devices” on Pages 44 to 47.
43 GRUNDIG Service
1 - 27
Allgemeiner Teil / General Section
GDV200
SOUND SETTINGS
____________________________________________________
Selecting the sound menu Ö P /
(
I
R
k
2
1
off
no
off
1
O A S8
>
K
U
Digital output
Off
Analogue output
Dolby Surround
Night mode
Off
Karaoke vocal
Off
Speakers
Settings...
>
1 Display the menu line by pressing »OSD«. 2 Select the »Ö« item (Settings) using » Ǹ « or » Ƿ « and press »P – « to confirm.
3 Select the »> « line (Sound menu) using » , « or » .« and press » Ƿ « to confirm.
Ü
Note: For further operation, see the following sections, each one starting from Step 1.
Adapting the digital or analog outputs on the DVD player to connected audio devices Ö P
K
(
I
R
k
2
1
off
no
off
/
1
O
Digital output
>
a
Off
>
S
Analogue output
On - PCM only
Night mode
On - All formats
Karaoke vocal
U
1 Select the »Digital output« line using » , « or » .« and activate by
Speakers
pressing » Ƿ «.
Ü
Ö P
K
(
I
R
k
2
1
off
no
off
/
1
O
Digital output
U
>
Note: Select the required setting (see the table) by pressing » , « or » .«.
2 Select the »Analogue output« line using » , « or » .« and activate by
Analogue output
>
You must adapt the output sockets on the DVD player and the type of signal according to the television or audio device to which it is connected. These settings are carried out in the »Tonmenü« (> ). The necessary settings are listed in the table.
a
Stereo A S
Night mode
Dolby Surround
Karaoke vocal
Virt. Surround (3D)
Speakers
Multichannel (6 ch)
pressing » Ƿ «.
Note: Select the required setting (see the table) by pressing » , « or » .«.
Ü
44
SOUND SETTINGS _____________________________________________________________________
Connected television/ audio device
Setting in »> « menu (Sound) Digital output Analog output
Television or amplifier with analog two-channel stereo sound
»Off«
»Stereo« or »Virt. Surround (3D)«
Television or amplifier with analog Dolby Surround
»Off«
»Dolby Surround«
Amplifier with digital two-channel stereo sound
»On-PCM only«
»Stereo«
Digital amplifier with multi-channel Decoder (Dolby AC3, MPEG,DTS)
»On-All formats«
»Stereo«, »Dolby Surround«,
Multi-channel AV receiver with analog 6 channel connection
»Off«
»Virt. Surround (3D)« »Multichannel (6 ch)«
3 Switch off the menu with the »OSD« button. Ö P ––
O >
a
a
U
(
I
R
k
off
no
off
–––
Digital output
Off
Analogue output
Dolby Surround
Night mode
Off
Karaoke vocal
Off
Speakers
Settings...
a
/
K
>
Settings for active loudspeakers You must adapt the output channels of the DVD player according to the loudspeakers connected and the acoustic characteristics of their location.
1 Select the »Speakers« line using » , « or » .« and activate by pressing » Ƿ «.
Ö P /
––
K –––
(
I
R
k
off
no
off
>
Speakers Centre
a
a
Front L & R
S
Surround L Surround R Subwoofer OK to exit
L S
2 Select the loudspeaker by pressing » , « or » .«. – The selected loudspeakers are highlighted in the menu. »Front L & R« »Centre« »Surround L« »Surround R« »Subwoofer«
– – – – –
Front loudspeakers Middle loudspeaker Surround loudspeaker Surround loudspeaker Bass loudspeaker
ENGLISH
Ü
45 1 - 28
GRUNDIG Service
GDV200
Allgemeiner Teil / General Section
SOUND SETTINGS _____________________________________________________________________ 3 Select the required setting using » Ǹ « or » Ƿ « and adapt the loudspeakers Ö P /
––
aa
♦
S L
♦
0dB
S
0ms
Subwoofer OK to exit
ѕ
a
Centre Surround L
(
–––
u
Front L & R
Surround R
K
I
R
k
off
no
off
>
Speakers
by pressing » , « or » .«:
– Volume setting » u« » L« (large) – The loudspeakers are suitable for audio signals below 120 Hz » S« (small) – The loudspeakers are not suitable for audio signals below 120 Hz »On« – Center/Surround loudspeakers or a subwoofer are connected »Off« – Center/Surround loudspeakers or a subwoofer are not connected – Set delay time »ѕ« Note: See the next chapter for how to calculate the delay time.
4 Click »OK« to save the setting. 5 Press »OSD« to quit the menu.
Calculating the delay time The DVD player is set by the manufacturer to play back correctly synchronised Digital Surround Sound. The listening range is defined so that the Surround loudspeakers are located approximately 150 cm closer to the listener than the front loudspeakers, and that the middle loudspeaker is on a line with the front loudspeakers. If you change the position of the loudspeakers you must also adjust the delay time. Choose the setting closest to the calculated value.
46
SOUND SETTINGS _____________________________________________________________________ Delay time for Digital Surround The distances are calculated in centimetres. Measure the distance from the front loudspeakers and the Surround loudspeakers to the listener’s central position. Subtract the distance to the Surround loudspeakers from the distance to the front loudspeakers and divide the result by 30. This gives you the necessary delay time in milliseconds for the Surround channel. Example: Distance to front loudspeakers – Distance to Surround loudspeakers = 60 cm : 30 = 2 milliseconds
180 cm 120 cm 060 cm
If the middle loudspeaker is on a line with the front loudspeaker, then no further setting is necessary. If the middle loudspeaker is nearer to the listener’s central position, then measure the distance from the front loudspeakers to the middle loudspeaker and divide the result by 30. This gives you the necessary delay time in milliseconds for the middle channel.
ENGLISH
Delay time for Dolby Surround With Dolby Surround 15 milliseconds are added to the delay time for the Surround channel. If the centre channel is also switched on, then 15 milliseconds are also added to the delay time for the centre channel.
47 GRUNDIG Service
1 - 29
Allgemeiner Teil / General Section
GDV200
SOUND SETTINGS _____________________________________________________________________ Switching night-time mode on/off Ö P
K
(
I
R
k
2
1
off
no
off
/
1
O
Digital output
>
This function optimises the sound dynamics at low playback volume.
1 Select the »Night mode« line using » , « or » .« and activate by pressing » Ƿ «.
Analogue output
>
Night mode
a
U
On Off
Karaoke vocal
2 Switch night-time mode on/off by pressing » , « or » .«.
A
Speakers
Ü
3 Quit the menu with the »OSD« button.
Switching karaoke on and off Ö P
K
(
I
R
k
2
1
off
no
off
/
1
O
Digital output
>
1 Select the »Karaoke vocal« line using » , « or » .« and activate by
Analogue output
>
Activate this function when you are playing a DVD with multi-channel karaoke sound. pressing » Ƿ «.
Night mode Karaoke vocal
U
a
On Off
Speakers
A
2 Press » , « or » .« to switch karaoke on or off.
Ü
3 Quit the menu with the »OSD« button.
48
PICTURE SETTINGS
___________________________________________________
Selecting the picture menu 1 Display the menu line by pressing »OSD«. Ö P / O
K
(
I
R
k
2
1
off
no
off
1 A S8
>
TV Shape
16:9
Black level shift
On
Video shift
U Ü
>
2 Select the »Ö« item (Settings) using » Ǹ « or » Ƿ « and press »P – « to confirm.
3 Select »O« (Picture menu) using » , « or » .« and then press » Ƿ « to confirm.
■■ ■■■■■ ■
Colour settings
1 Personal
Personal colour
Settings...
Note: For further operation, see the following sections, each one starting from Step 1.
Adapting the television format If your television has a 16:9 screen format, then select the 16:9 setting. If you have a standard television (screen format 4:3) you can select: – »4:3 letterbox« for wide-screen playback with black bars on the top and bottom edges of the screen, or – »4:3 panscan« for wide-screen playback using the full height of the screen, but with the left and right edges of the picture cropped.
O > U Ü
K
(
I
R
k
2
1
off
no
off
1 A S8
TV Shape
16:9
Black level shift
On
Video shift
■■ ■■■■■ ■
Colour settings
1 Personal
Personal colour
Settings...
>
1 Select the »TV Shape« line using » , « or » .« and activate by pressing » Ƿ «.
2 Select the picture format » 16:9«, » 4:3 panscan« or » 4:3 letterbox« by pressing » , « or » .«.
3 Quit the menu with the »OSD« button.
ENGLISH
Ö P /
49 1 - 30
GRUNDIG Service
GDV200
Allgemeiner Teil / General Section
PICTURE SETTINGS ____________________________________________________________________ Black level setting (for NTSC transmissions only) This setting adjusts the colour dynamics to create a better picture contrast. Ö P / O
K
(
I
R
k
2
1
off
no
off
1 A S8
>
TV Shape
16:9
Black level shift
On
Video shift
U Ü
>
1 Select the »Black level shift« line using » , « or » .« and activate by pressing » Ƿ «.
2 Switch the function on or off with » , « or » .«.
■■ ■■■■■ ■
Colour settings
1 Personal
Personal colour
Settings...
3 Quit the menu with the »OSD« button.
Adjusting the picture position The ex-works setting centres the picture on the screen. This option enables you to move the picture on the screen to the left or right. Ö P / O
K
(
I
R
k
2
1
off
no
off
1 A S8
>
TV Shape
16:9
Black level shift
On
Video shift
U Ü
>
1 Select the »Video shift« line using » , « or » .« and activate by pressing » Ƿ «.
2 Shift the screen position using » Ǹ « or » Ƿ « press »OK« to save.
■■ ■■■■■ ■
Colour settings
1 Personal
Personal colour
Settings...
3 Quit the menu with the »OSD« button.
50
PICTURE SETTINGS ____________________________________________________________________ Colour settings This function enables you use pre-set values (colour, brightness, contrast) for the playback image. Ö P / O
K
(
I
R
k
2
1
off
no
off
1 A S8
>
TV Shape
16:9
Black level shift
On
Video shift
U Ü
>
1 Select the »Colour settings« line using » , « or » .« and activate by pressing » Ƿ «.
2 Select the desired setting using the » , « or » .« buttons.
■■ ■■■■■ ■
Colour settings
1 Personal
Personal colour
Settings...
3 Quit the menu with the »OSD« button.
Custom colour settings This function enables you to choose your own colour, brightness and contrast settings. Ö P / O > U Ü
K
(
I
R
k
2
1
off
no
off
1 A S8
TV Shape
16:9
Black level shift
On
Video shift
■■ ■■■■■ ■
Colour settings
1 Personal
Personal colour
Settings...
>
1 Select the »Personal colour« line using » , « or » .« and activate by pressing » Ƿ «.
2 Choose the setting (saturation, brightness, contrast) using » , « or » .« and press » Ƿ « to confirm.
3 Set the saturation, brightness or contrast using » , « or » .« and press »OK « to save the setting.
ENGLISH
4 Switch off menu with the »OSD« button.
51 GRUNDIG Service
1 - 31
Allgemeiner Teil / General Section
GDV200
CUSTOM SETTINGS
__________________________________________________
Selecting the language menu Ö P
K
(
I
R
k
2
1
off
no
off
/
1
O
Audio
English
Subtitle
English
Menu
English
> U
>
1 Display the menu line by pressing »OSD«. 2 Select the »Ö« item (Settings) using » Ǹ « or » Ƿ « and press » .« to confirm.
A S8
3 Select »M« (Language menu) with » , « or » .« and activate with » Ƿ «.
Ü
Note: For further operation, see the following sections, each one starting from Step 1.
Selecting the dubbed language
Ö P /
1
O
Audio
>
K
(
I
R
k
2
1
off
no
off
a
Português
Subtitle
Italiano
Menu
English
>
S
If several languages are available on the current DVD, the sound is played back in the language you have selected. If the language you select is not on the DVD, the first dubbed language available is automatically selected.
1 Select the »Audio« line using » , « or » .« and activate by pressing » Ƿ «.
U
2 Select the desired dubbed language by pressing » , « or » .«.
Ü
3 Quit the menu with the »OSD« button. Ö P /
1
O
Audio
K
(
I
R
k
2
1
off
no
off
>
1 Select the »Menu« line using » , « or » .« and activate by pressing » Ƿ «.
Subtitle
>
Selecting the language of the DVD player’s screen menus
Menu
a
Português
S
Italiano
U
2 Select the desired language for the screen menus by pressing » , « or
English
Ü
» .«.
52
3 Quit the menu with the »OSD« button.
CUSTOM SETTINGS
__________________________________________________
Selecting the language menu Ö P
K
(
I
R
k
2
1
off
no
off
/
1
O
Audio
English
Subtitle
English
Menu
English
> U
>
1 Display the menu line by pressing »OSD«. 2 Select the »Ö« item (Settings) using » Ǹ « or » Ƿ « and press » .« to confirm.
A S8
3 Select »M« (Language menu) with » , « or » .« and activate with » Ƿ «.
Ü
Note: For further operation, see the following sections, each one starting from Step 1.
Selecting the dubbed language
Ö P /
1
O
Audio
>
K
(
I
R
k
2
1
off
no
off
a
Português
Subtitle
Italiano
Menu
English
>
S
If several languages are available on the current DVD, the sound is played back in the language you have selected. If the language you select is not on the DVD, the first dubbed language available is automatically selected.
1 Select the »Audio« line using » , « or » .« and activate by pressing » Ƿ «.
U
2 Select the desired dubbed language by pressing » , « or » .«.
Ü
3 Quit the menu with the »OSD« button. Ö P /
1
O
Audio
K
(
I
R
k
2
1
off
no
off
>
1 Select the »Menu« line using » , « or » .« and activate by pressing
Subtitle
> U Ü
52 1 - 32
Menu
Selecting the language of the DVD player’s screen menus
a
Português
S
» Ƿ «.
Italiano English
2 Select the desired language for the screen menus by pressing » , « or » .«.
3 Quit the menu with the »OSD« button.
GRUNDIG Service
GDV 200
Servicetestprogramm
2. Manueller Systemtest
Servicetestprogramm
D
Das Servicetestprogramm ist in 3 verschiedene Varianten unterteilt: – Automatischer Systemtest – Manueller Systemtest – PC-Systemtest Die Basis dieser Systemtests sind die Servicetestebenen, die über die jeweiligen Tests automatisch durchgeführt werden oder manuell aufrufbar sind. Die nachfolgend abgebildeten Tasten sind auf der linken Seite unter der magnetisch gehalten Abdeckung. Stop (4)
Pause (3)
Open / Close (5)
Previous (2)
Next (1)
Play (0)
Der manuelle Systemtest bietet die Möglichkeit, mit Hilfe der Tests festzustellen, welche Module (Bedieneinheit, Digital-Platte oder Laufwerk) defekt sind. Des weiteren sind durch das Lesen des Fehlerprotokolls und der Fehlerbits alle Fehler feststellbar, die in letzter Zeit bei Normalbetrieb des DVD-Players aufgetreten sind. Am Ende des manuellen Systemtest wird ein Dauerlauftest durchgeführt (die Servicetestebenen des automatischen Systemtest werden in einer Endlosschleife wiederholt). Zu diesem Test muß der DVD-Player an einem Fernsehgerät (PAL oder Multisystem) angeschlossen sein, um das Ergebnis der verschiedenen Servicetestebenen prüfen zu können. Damit die Ergebnisse bestimmter Servicetestebenen überprüft werden können, sieht der manuelle Systemtest einige interaktive Eingriffe von seiten des Anwenders vor (z.B. Bestätigung eines Testbilds oder Testtons). Bei einigen Ebenen (z.B. Ebenen, die die Laufwerksfunktionen testen) muß der DVD-Player geöffnet sein, damit eine visuelle Kontrolle der beweglichen Teile möglich ist. Es werden nur Tests im Rahmen der Servicetest-Software durchgeführt, da nur diese Fehler aufgedeckt werden können. Aufruf des manuellen Systemtest mit Testübersicht Zwei Tasten gleichzeitig drücken + Gerät ans Netz anschliessen
1. Automatischer Systemtest
Interaktiver Test
Mit dem automatischen Systemtest ist eine Überprüfung der Hardware des DVD-Player ohne zusätzliche Geräte möglich. Während dem automatischen Systemtest werden die in der Tabelle aufgeführten Servicetestebenen aufgerufen und durchgeführt. Bei einem Gerätedefekt, Anzeige "Error", sind die einzelnen Servicetestebenen mit dem manuellen Systemtest oder dem PC-Systemtest durchzuführen.
Bedieneinheit Display-Test LED-Test Tastatur-Test Fernbedienungs-Test
Aufruf des automatischen Systemtest mit Testübersicht
Bildtest 1 Tontest 1 / DVD-EURO-AV-Test EURO-AV-Durchschleif-Test Tontest 2 Farbeinstellung-Test L
C
R
NEIN
SW
SR
L
C
R
SW
SR
JA L
TITLE
CHAPTER SCAN A-B
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
23a (VideoColDencOn/Off) 20a (AudioPinkNoiseOn) 54a (VideoScartSwDvd) 54b (VideoScartSwPass) AudioSinOn 53a (VideoColSetupHi) 53b (VideoColSetupLo)
Laufwerk
Schubladen-Test
D VD
C
R
TITLE VCD
CHAPTER SCAN A-B
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
SW
SR
TITLE VCD
Schlitten-Test Disk-Motor-Test
D VD
DIGITAL SURROUND SL
CHAPTER SCAN A-B
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
Automatischer Systemtest beenden: Gerät vom Netz trennen
Beschreibung
9
VideoColSetupComm
Test des I2C-Busses zum IC7316 der AV-MUX-Platte
8
VideoScartSwComm
Test des I2C-Busses zum IC7305 der AV-MUX-Platte
7
PapChksFl
Berechnen und Überprüfen der Checksumme des FLASH-Speichers
6
PapDramWrR
Muster-Test aller Zellen im DRAM
5
Papl2cDisp
Test des I2C-Busses zum SlaveProzesser und Display
4
PapS2bEcho
Test des I2C-Busses zum Laufwerk
3
Papl2cNvram
Test des I2C-Busses zum NVRAM
2
PapNvramWrR
Muster-Test aller Zellen im NVDRAM
1
CompSdramWrR
Muster-Test aller Zellen im SDRAM
GRUNDIG Service
28 (DispRc)
D VD
VCD
DIGITAL SURROUND SL
Nummer Ebene am Display
27 (DispKeyb)
DIGITAL SURROUND SL
Version
Gerät OK
29 (DispLed)
DVD-Monoboard
Zwei Tasten gleichzeitig drücken + Gerät ans Netz anschliessen
Während des Tests zeigt das Display die Anzahl der Ebenen, die noch zu prüfen sind.
30 (DispDisplay)
37 (BeVer) 43a/b (BeTrayOut/In) 41a/b (BeSledgeOut/In) 39a (BeDiscMotorOn)
Fokus-Test
38a (BeFocusOn)
Radial-Test
40a (BeRadialOn)
Spursprung-Test
42a/b/c (BeGroovesIn/Mid/Out)
Schubladen-Test
43a/b (BeTrayOut/In)
Fehlerprotokoll & -Bits
31 (LogReadErr) 32 (LogReadbits)
Dauerlauftest
Test mit Netztaste AUS beenden
2-1
Ķ
Servicetestprogramm
GDV 200
2.1 Interaktiver Test 2.1.1 Bedieneinheit Display-Test Servicetestebene: DispDisplay. Bei diesem Test wird das Display wie in der folgenden Grafik dargestellt angesteuert. Die einzelnen Anzeigen können entweder durch Drücken der Taste PLAY (Anzeige OK) oder Pause (Anzeige nicht OK) fortgeschaltet werden. Dieser Test wird durchgeführt bis die Taste NEXT gedrückt wird. Durch ein vorzeitiges Drücken der Taste NEXT wird das Gesamtergebnis des manuellen Servicetestprogrammes verfälscht. C
L
L
C
R
SW
SR
SW
TITLE
SR
VCD
CHAPTER SCAN A-B
wenn OK, PLAY drücken C
L
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
D VD
R
DIGITAL SURROUND SL
SW
TITLE
SR
VCD
CHAPTER SCAN A-B
wenn OK, PLAY drücken C
L
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
wenn Nicht OK, PAUSE drücken
D VD
R
DIGITAL SURROUND SL
SW
TITLE
SR
VCD
CHAPTER SCAN A-B
wenn OK, PLAY drücken
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
wenn Nicht OK, PAUSE drücken
CHAPTER SCAN A-B
Code Hexadezimal C 31 2C 30 22 20 21 58 59 5A 5b 5C 0 1 2
STANDBY STOP PLAY PAUSE SLOW NEXT PREVIOUS CURSOR UP CURSOR DOWN CURSOR LEFT CURSOR RIGHT OK 0 1 2
wenn Nicht OK, PAUSE drücken
TITLE VCD
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
Die einzelnen Tasten der Fernbedienung sind mit Hilfe der folgenden Tabelle überprüfbar:
DIGITAL SURROUND SL
D VD
DIGITAL SURROUND SL
Fernbedientaste
D VD
R
Fernbedienungs-Test Servicetestebene: DispRc Dazu ist auf der Fernbedienung eine beliebige Taste einmal zu drücken. Der Code der gedrückten Taste wird am Gerätedisplay als Hexadezimalzahl gezeigt, solange die Taste gedrückt bleibt.
Fernbedientaste
Code Hexadezimal 3 4 5 6 7 8 9 C8 85 4E 4b 54 F 83 1C
3 4 5 6 7 8 9 REPEAT ANGLE AUDIO SUBTITLES ROOT MENU OSD ON/OFF RETURN SHUFFLE
fortsetzen durch Drücken von NEXT
LED-Test Servicetestebene: DispLed Bei diesem Test müssen die roten LEDs leuchten. Wenn die LEDs leuchten, dann PLAY drücken; andernfalls die Taste PAUSE drücken. Mit der Taste NEXT kann auf den nächsten Test weitergeschaltet werden. Durch vorzeitiges Drücken der Taste NEXT wird das Gesamtergebnis des manuellen Servicetestprogrammes verfälscht. Tastatur-Test Servicetestebene: DispKeyb Dazu müssen alle Tasten des Gerätes einmal gedrückt werden. Der Code der jeweils gedrückten Taste erscheint am Gerätedisplay (hexadezimalzahl). Die daran anschließende Zahl (hexadezimal) zeigt an, wie oft die Taste betätigt wurde. Im Display sind immer die letzten 3 Codenummern der zuletzt gedrückten Tasten sichtbar (ab dem Beginn des Tastatur-Test). Beispiel einer Anzeige während des Tests: L
C
D VD
R
Der Fernbedientest kann durch Drücken der Taste NEXT am DVDPlayer beendet werden. Der Fernbedienungs-Test ist bestanden, wenn vor dem Drücken der Taste NEXT ein Code angezeigt wurde. Wird NEXT vor Betätigen einer Taste auf der Fernbedienung gedrückt, entsteht ein Fehler im Fernbedientest. Nach Drücken der Taste NEXT erscheint das Ergebnis am Display des DVD-Player: L
wenn OK:
L
wenn nicht OK:
C
R
D VD
DIGITAL SURROUND SL
SW
C
SR
R
TITLE
CHAPTER SCAN A-B
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
TITLE
CHAPTER SCAN A-B
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
VCD
D VD
DIGITAL SURROUND SL
SW
SR
VCD
Mit der Taste NEXT auf der Gerätetastatur kann auf den nächsten Test weitergeschaltet werden.
DIGITAL SURROUND SL
tb: 01: 51: 52:
SW
TITLE
SR
VCD
CHAPTER SCAN A-B
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
Tastaturtest Taste Play das 1. Mal gedrückt Taste OPEN/CLOSE das 1. Mal gedrückt Taste OPEN/CLOSE das 2. Mal gedrückt
2.1.2 DVD-Monoboard Bildtest 1 Servicetestebene: VideoColDencOn/Off Beim Bildtest 1 wird ein Farbbalken-Testbild generiert. Im Display erscheint: L
Tasten ID 0 1 2 3 4 5 A
Taste PLAY NEXT PREVIOUS PAUSE STOP OPEN / CLOSE STANDBY
C
R
D VD
DIGITAL SURROUND SL
Taucht eine Taste mehr als einmal auf (wegen Hardwarefehler), wird der Tastencode zweimal (oder öfter) angezeigt, wobei die zweite Zahl um 1 erhöht wird. Zum Beenden des Tastaturtests die Taste NEXT mindestens 1 Sekunde gedrückt halten. Durch ein vorzeitiges Beenden wird das Ergebnis verfälscht. Das Testergebnis erscheint auf dem Gerätedisplay.
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
Durch Drücken der Taste PLAY wird bestätigt, dass das Bild sichtbar ist. Durch Drücken der Taste PAUSE wird dem Gerät mitgeteilt, dass das Bild nicht sichtbar oder gestört war. Mit der Taste NEXT kann auf den nächsten Test weitergeschaltet werden. Durch ein vorzeitiges Drücken der Taste NEXT wird das Testergebnis verfälscht. Tontest 1 Servicetestebene: AudioPinkNoisOn/Off (optional) Beim Tontest 1 wird ein rosa Rauschen erzeugt. Im Display erscheint: L
C
R
D VD
DIGITAL SURROUND
L
wenn OK:
R
SL
SW
C
SR
R
TITLE VCD
CHAPTER SCAN A-B
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
CHAPTER SCAN A-B
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
D VD
DIGITAL SURROUND SL
SW
SR
TITLE VCD
Durch Drücken der Taste NEXT am Gerät kann zum nächsten Test übergegangen werden.
Ķ2-2
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
DIGITAL SURROUND
L
wenn nicht OK:
C
SL
D VD
Durch Drücken der Taste PLAY wird bestätigt, dass der Ton hörbar ist und anschließend stummgeschaltet. Durch Drücken der Taste PAUSE wird dem Gerät mitgeteilt, dass der Ton nicht hörbar oder gestört war. Mit der Taste NEXT kann auf den nächsten Test weitergeschaltet werden. Durch ein vorzeitiges Drücken der Taste NEXT wird das Testergebnis verfälscht.
GRUNDIG Service
GDV 200
Servicetestprogramm
Scart-DVD-Test Beim Scart-DVD-Test wird ein Farbbalken-Testbild und ein Ton mit rosa Rauschen erzeugt. Im Display erscheint: L
C
R
D VD
2.1.3 Laufwerk Version Servicetestebene: BeVer Die Version ist die Laufwerkversions-Nummer.
DIGITAL SURROUND SL
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK L
C
R
D VD
DIGITAL SURROUND
Durch Drücken der Taste PLAY wird bestätigt, dass das Bild sichtbar und der Ton hörbar ist, und anschließend wird der Ton stummgeschaltet. Durch Drücken der Taste PAUSE wird dem Gerät mitgeteilt, dass der Test fehlerhaft war. Mit der Taste NEXT kann auf den nächsten Test weitergeschaltet werden. Durch ein vorzeitiges Drücken der Taste NEXT wird das Testergebnis verfälscht. Scart-Loop-Test Beim Scart Loop Test wird das Bild- und Tonsignal der AUX/VCR IN Buchse zum Fernseher durchgeschleift. Im Display erscheint: L
C
R
SW
SR
CHAPTER SCAN A-B
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
Tontest 2 Servicetestebene: AudioSinOn Beim Tontest 2 wird ein sinusförmiger Ton 1kHz erzeugt. Im Display erscheint: R
D VD
DIGITAL SURROUND SL
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
Zum Beenden des Tests die Taste STOP drücken. Durch Drücken der Taste PLAY wird bestätigt, dass der Ton hörbar war. Durch Drücken der Taste PAUSE wird dem Gerät mitgeteilt, dass der Ton nicht hörbar oder gestört war. Mit der Taste NEXT kann auf den nächsten Test weitergeschaltet werden. Durch ein vorzeitiges Drücken der Taste NEXT wird das Testergebnis verfälscht. Colour-set-up-Test Beim Colour-set-up-Test wird ein Farbbalken-Testbild generiert. Im Display erscheint:
L
C
R
SR
L
CHAPTER SCAN A-B
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
C
R
D VD
DIGITAL SURROUND SW
SR
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
C
R
D VD
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
Durch Drücken der Taste PLAY oder PAUSE kann die Schublade geschlossen oder geöffnet werden. Am Ende dieser Überprüfung sollte die Schublade geschlossen sein. Beachten Sie, dass dieser Test nicht in das Ergebnis des Laufwerktests eingeht. Durch Drücken der Taste NEXT kann auf den nächsten Test weitergeschaltet werden. Schlitten (optischer Test) Servicestebene: BeSledgeOut/In Im zweiten Laufwerktest wird der Schlitten überprüft. Dabei kann der Schlitten mit den Tasten PLAY (Ebene BeSledgeOut) und PAUSE (Ebene BeSledgeIn) beliebig oft aus- und eingefahren werden. Durch Drücken von NEXT kann auf den nächsten Test weitergeschaltet werden. Beachten Sie, dass dieser Test nicht in das Ergebnis des Laufwerktests eingeht. Während der Überprüfung erscheint im Display: L
C
R
D VD
DIGITAL SURROUND SL
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
Disc Motor (optischer Test) Servicetestebene: BeDiscMotorOn/Off Im dritten Laufwerktest wird der Disc-Motor überprüft. Im Display erscheint: C
R
D VD
DIGITAL SURROUND
TITLE VCD
Mit der Taste NEXT kann auf den nächsten Test weitergeschaltet werden. Im Display erscheint:
SL
TRACK SHUFFLE REPEAT
DIGITAL SURROUND
L
SW
CHAPTER SCAN A-B
D VD
DIGITAL SURROUND SL
TITLE VCD
Schubladen-Test Servicetestebene: BeTrayOut/In Als erstes wird die Schublade überprüft. Dieser Test soll außerdem eine Möglichkeit geben, eine Disc in den DVD-Player einzulegen, die für einige Laufwerktests notwendig ist. Dieser Test wird am Ende der Laufwerktests nur deshalb wiederholt, damit die Disc wieder aus der Schublade genommen werden kann. Im Display erscheint: L
TITLE VCD
Durch Drücken der Taste Previous kann zum Scart DVD Test zurückgeschaltet werden. Mit der Taste NEXT kann auf den nächsten Test weitergeschaltet werden.
C
SR
Durch Drücken der Taste NEXT können die Laufwerktests gestartet werden.
SL
L
SW
D VD
DIGITAL SURROUND SL
SL
TITLE VCD
CHAPTER SCAN A-B
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
Durch Drücken der Taste Previous kann zum COLSETUP HI Test zurück geschaltet werden. Durch Drücken der Taste PLAY wird bestätigt, dass das Farbbalken-Testbild sichtbar war. Durch Drücken der Taste PAUSE wird dem Gerät mitgeteilt, dass das Bild nicht passte. Mit der Taste NEXT kann auf den nächsten Test weitergeschaltet werden. Durch ein vorzeitiges Drücken der Taste NEXT wird das Testergebnis verfälscht.
SL
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
Durch Drücken der Taste PLAY wird das Laufen des Disc-Motors bestätigt. Durch Drücken der Taste PAUSE wird signalisiert, dass der Motor nicht funktioniert. Mit der Taste NEXT kann auf den nächsten Test weitergeschaltet werden. Durch ein vorzeitiges Drücken der Taste NEXT wird das Testergebnis verfälscht. Fokus (akustischer Test, mit CD) Servicetestebene: BeFocusOn/Off Der vierte Laufwerktest dient zur Überprüfung der Fokussierung. Im Display erscheint: L
C
R
D VD
DIGITAL SURROUND SL
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
Durch Drücken der Taste PLAY wird ein fehlerloses Fokussieren bestätigt. Durch Drücken der Taste PAUSE wird dem Gerät eine Fehlfunktion mitgeteilt. Mit der Taste NEXT kann auf den nächsten Test weitergeschaltet werden. Durch ein vorzeitiges Drücken der Taste NEXT wird das Testergebnis verfälscht.
GRUNDIG Service
2-3
Ķ
Servicetestprogramm
GDV 200
Radialsteuerung (optischer und akustischer Test, mit CD) Servicetestebene: BeRadialOn/Off Der fünfte Laufwerktest dient zur Überprüfung der Radialsteuerung. Im Display erscheint:
2.3 Dauerlaufprüfung Zu Beginn der Testschleife erscheint zunächst das Ergebnis des interaktiven Playertests: L
L
C
R
D VD
SL
SW
SR
SL
TITLE VCD
CHAPTER SCAN A-B
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
R
SW
SR
D VD
TITLE VCD
CHAPTER SCAN A-B
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
Durch Drücken der Taste PLAY können die drei verschiedenen Spureinstellungen gewählt werden (vorwärts in der Folge In-Mid-Out) oder PAUSE (rückwärts in der Folge Out-Mid-In). Die Spureinstellungen werden zyklisch umgeschaltet. Beachten Sie, dass dieser Test nicht in das Ergebnis des Laufwerktests eingeht. Mit NEXT kann auf den nächsten Test weitergeschaltet werden. Schublade Servicetestebene: BeTrayOut/In Am Ende der Laufwerktests wird der Schubladentest wiederholt. Im Display erscheint: L
C
R
SW
SR
Modul L
TITLE VCD
CHAPTER SCAN A-B
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
2.2 Fehlerprotokoll und Fehlerbits Fehlerprotokoll (ERROR LOG) Servicetestebene: LogReadErr Durch Lesen des Fehlerprotokolls und der Fehlerbits sind Fehler festzustellen, die in letzter Zeit bei Normalbetrieb des DVD-Player aufgetreten sind. Im Display erscheint z.B.: R
D VD
DIGITAL SURROUND SL
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
Durch Drücken der Taste PLAY (vorwärts) oder PAUSE (rückwärts) können die protokollierten Fehler fortgeschaltet werden. Die aufleuchtende Zahl zeigt an, welcher Fehlercode gerade am Display gezeigt wird (in obigem Beispiel ist es Fehlercode Nummer 15010C). Erscheint “0000” an allen Stellen, ist das Fehlerprotokoll leer. Die protokollierten Fehler werden zyklisch angezeigt. Der Fehlercode mit der niedrigsten Zahl ist der zuletzt festgestellte Fehler. Mit der Taste NEXT kann auf den nächsten Test weitergeschaltet werden. Eine Übersicht der ERROR LOGs befindet sich auf Seite 2-8. Fehlerbits Die Fehlerbits werden in der Ebene ReadBits gelesen. Während dem Lesen der Fehlerbits erscheint folgende Information auf dem Display: L
C
R
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
Zyklen
Fehlercode
C
R
D VD
DIGITAL SURROUND
TIME TRACK
Dieser Test bietet die Möglichkeit, die Disc aus der Schublade zu nehmen. Durch Drücken der Taste PLAY oder PAUSE kann die Schublade geschlossen oder geöffnet werden. Vor dem Weiterschalten zum nächsten Test mit der NEXT-Taste muß die Schublade geschlossen sein.
C
CHAPTER SCAN A-B
D VD
SL
L
TITLE
Beim Dauerlauftest werden alle Ebenen abgearbeitet wie beim automatischen Systemtest. Sie werden jedoch in einer Endlosschleife wiederholt. Am Display des DVD-Player erscheinen nicht nur die drei Zahlen, die anzeigen, welche Module defekt/nicht defekt sind, und der zuletzt festgestellte Fehlercode (wie bereits an anderer Stelle erwähnt können nur die Fehler entdeckt werden, die im Rahmen des Servicetestprogramms liegen), sondern auch ein Zähler, der anzeigt, wie oft die Testschleife bereits durchlaufen wurde. Beispiel:
DIGITAL SURROUND SL
D VD
VCD
Angezeigter Anzeige für das jeweilige Modul Wert Laufwerk MonoBedienboard einheit 000 ok ok ok 001 ok ok Fehler 010 ok Fehler ok 011 ok Fehler Fehler 100 Fehler ok ok 101 Fehler ok Fehler 110 Fehler Fehler ok 111 Fehler Fehler Fehler
DIGITAL SURROUND SL
R
SR
Auf der linken Seite des Displays steht ein 3-stelliger Code mit einem Wertebereich zwischen 000 und 111. Diese Werte sind wie folgt zu interpretieren:
Spursprungtest (akustischer Test, mit CD) Servicetestebenen: BeGroovesIn/Mid/Out Der sechste und letzte Laufwerktest prüft das Spursprungverhalten. Im Display erscheint: C
SW
TIME TRACK
Durch Drücken der Taste PLAY wird eine fehlerlose Radialsteuerung bestätigt. Durch Drücken der Taste PAUSE wird dem Gerät eine Fehlfunktion mitgeteilt. Mit der Taste NEXT kann auf den nächsten Test weitergeschaltet werden. Durch ein vorzeitiges Drücken der Taste NEXT wird das Testergebnis verfälscht.
L
C
DIGITAL SURROUND
DIGITAL SURROUND
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
Die Zahl nach dem Bindestrich gibt die Anzahl der Testschleifen an. Die 4 Stellen rechts am Display zeigen den letzten Fehler an, der in der Testschleife entdeckt wurde: die beiden linken Stellen dieses Codes zeigen, in welcher Ebene der Fehler aufgetreten ist, die beiden rechten Stellen bezeichnen den Fehlercode innerhalb dieser Ebene. Eine detaillierte Beschreibung des Fehlercodes finden Sie nachstehend. Fehlercodenummern im Dauerlauftest: Fehler Ebene
Fehlerbeschreibung
0601
6
Berechnete Prüfsumme des FLASH ist nicht richtig
0901
9
Der DVD-DRAM ist defekt
1104
11
Aktivität auf I2C-Bus vor Start
1102
11
NVRAM Zugriffsunterbrechung
1103
11
Keine Rückmeldung vom NVRAM
1104
11
Keine Rückmeldung vom NVRAM
1201
12
Aktivität auf I2C-Bus
1202
12
I2C-Bus arbeitet nicht
1203
12
Slave-Controller antwortet nicht
1204
12
Antwort vom Slave ist nicht richtig
1301
13
Paritätsfehler vom Laufwerk zum seriellen Bus
1302
13
Paritätsfehler vom seriellen Bus zum Laufwerk
1303
13
Keine Kommunikation zwischen seriellem Bus und Laufwerk
1304
13
Fehler Kommunikationsunterbrechung
1601
16
Der SDRAM ist defekt
D VD
DIGITAL SURROUND SL
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
Es werden nur gesetzte Fehlerbits mit ihrer Nummer (dezimal) angezeigt. Die Bedeutung der Bits ist auf Seite 2-8 erklärt. Zeigt das Display nur “EB-0”, sind keine Fehlerbits gesetzt worden. Mit Taste NEXT kann auf den nächsten Test weitergeschaltet werden.
Ķ2-4
GRUNDIG Service
GDV 200
Servicetestprogramm
PC-Systemtest Hardwareanforderung: – Service-PC – freier COM-Port (COM1) am Service-PC – Spezialkabel (Service Serial Interface – RS232)
7654 321
RS232 SOCKET BACKSIDE VIEW 1 = TX1P 2 = IACK5N 3 = RX1P 4 = RTSEX 5 = GROUND 6 = CTS1P 7 = +5V PHR-7 CONNECTOR
Softwareanforderung: – Terminal-Emulationsprogramm (z.B. OS2 – Wrap Terminal oder Windows 95 – Procomm) Spezialkabel am Service Serial Interface des DVD-Players und am freien COM-Port des Service-PC anschließen. Mit diesem Spezialkabel wird der Testpin am Service Serial Interface mit Masse verbunden (d.h. Testpin aktiviert). Terminal-Emulationsprogramm starten und folgende COM-Port-Einstellungen prüfen: 19200bps, 8 Datenbits, keine Parität, 1 Stoppbit, kein Protokoll und keine Umwandlung. Aufruf der Bedienvarianten Player einschalten. Am Bildschirm des Service-PC erscheint folgender Text: DVDv2B Diagnostic Software version 1.0 SDRAM Interconnection test passed Basic Sdram test passed. Karaoke init OK (M)enu, (C)ommand (S)2B–interface or (D)ownload? [M]:@
Die erste Zeile enthält die Versionsnummer des Servicetestprogramms. Die nächsten beiden Zeilen zeigen, dass zwei weitere Tests (Ebene 2 bzw. 4) mit Erfolg abgeschlossen wurden. Die Beschreibung zu diesen Ebenen finden Sie im Kapitel "Servicetestebenen". Erscheinen nicht alle diese Meldungen auf dem Bildschirm des Service-PC, wurde in der entsprechenden Ebene ein Fehler entdeckt. In der 4. Zeile müssen Sie die Bedienvariante (M)enu oder (C)ommand wählen und mit bestätigen. Beenden der Bedienvariante Zum Beenden der aktiven Bedienvariante muss der DVD-Player abgeschaltet werden.
1. Bedienvariante (M)enu Die Bedienvariante (M)enu ist Bestandteil des Servicetestprogramms. Das gewünschte Menü kann durch Eingabe der Nummer des gewählten Menüpunktes aufgerufen werden. Jede Eingabe ist mit einem zu bestätigen. Ungültige Eingaben zeigt der Menüverwalter mit folgender Fehlermeldung. Beispiel: Select> 9 Invalid menu choice, number out of range ER @ Press RETURN to continue...@
1.1 Menü- und Untermenütafeln Das Symbol “–>” hinter den jeweiligen Menüpunkten verweist auf ein weiteres Untermenü. Die in den Klammern aufgeführte Nummer ist die Nummer der Service-Testebene (Punkt 3). Hauptmenü MAIN MENU 1. Audio –> 2. Basic engine –> 3. Display PWB –> 4. Processor & Peripherals –> 5. Karaoke –> 6. Log –> 7. Miscellaneous –> 8. Video –>
Untermenüebene 1 AUDIO MENU 1. Deemphasis –> 2. Mute –> 3. PinkNoise –> 4. SineWave –> BASIC ENGINE MENU 1. Disc Motor –> 2. Focus –> 3. Grooves –> 4. Radial –> 5. Reset [44] 6. Sledge –> 7. Tray –> 8. Version [37] DISPLAY PWB MENU 1. Display [30] 2. Keyboard [27] 3. LEDs [29] 4. Remote control [28] 5. Version [26] PROCESSOR AND PERIPHERALS MENU 1. Clock –> 2. DRAM Write/Read [9] 3. Flash –> 4. I2C –> 5. S2B –> 6. SDRAM Write/Read [16] KARAOKE MENU 1. Karaoke Mode Off [48a] 2. Karaoke Mode On [48b] 3. Karaoke Mic Input [49] 4. Karaoke Key On [50a] 5. Karaoke Key Off [50b] 6. Karaoke Echo On [51a] 7. Karaoke Echo Off [51b] LOG MENU 1. Read last errors [31] 2. Read error bits [32] 3. Reset [33] MISCELLANEOUS MENU 1. NVRam Utils –> 2. 2B Utils –> 3. Statistics Info –> 4. Read Application version [46] VIDEO MENU 1. Colourbar –> 2. Scart –>
Ergebnis und Ausgabe der gewählten Servicetestebene erscheinen am Service-Terminal im Punkt 2 beschriebenen Standardformat. Beispiel: Select> 6 1600 OK @ Press RETURN to continue…@
Nach Drücken der Taste erscheint das aktuelle Menü wieder auf dem Bildschirm. Zum Hauptmenü gelangt man aus einem Untermenü durch Drücken der Taste .
GRUNDIG Service
2-5
Ķ
Servicetestprogramm
Untermenüebene 2 DEEMPHASIS MENU 1. Deemphasis On [18a] 2. Deemphasis Off [18b] MUTE MENU 1. Mute on [19a] 2. Mute off [19b] NOISE MENU 1. Pink Noise on [20a] 2. Pink Noise off [20b] SINEWAVE MENU 1. Audio Sine on [21a] 2. Audio Burst on [21b] DISC MOTOR MENU 1. Disc motor on [39a] 2. Disc motor off [39b] FOCUS MENU 1. Focus on [38a] 2. Focus off [38b] GROOVES MENU 1. Jump grooves to inside [42a] 2. Jump grooves to middle [42b] 3. Jump grooves to outside [42c] RADIAL MENU 1. Radial control on [40a] 2. Radial control off [40b] SLEDGE MENU 1. Sledge inwards [41a] 2. Sledge outwards [41b]
GDV 200
1.2 Bildschirmdarstellung der Menüs Bei der Verwendung von Menüs ist keine spezielle Bildschirmdarstellung festgelegt: Mit Ausnahme des vorher beschriebenen Formats gibt es für die Menüs kein bestimmtes Layout. Eine typische Menü-Session sieht wie folgt aus: DVDv2B Diagnostic Software version 0.6 SDRAM Interconnection test passed Basic Sdram test passed. Karaoke init OK (M)enu, (C)ommand (S)2B–interface or (D)ownload? [M]:@ M ↵ MAIN MENU 1. Audio –> 2. Basic engine –> 3. Display PWB –> 4. Processor & Peripherals –> 5. Karaoke –> 6. Log –> 7. Miscellaneous –> 8. Video –> Select> 4 ↵ PROCESSOR AND PERIPHERALS MENU 1. Clock –> 2. DRAM Write/Read [9] 3. Flash –> 4. I2C –> 5. S2B –> 6. SDRAM Write/Read [16] Select> 3 ↵
TRAY MENU 1. Open tray [43b] 2. Close tray [43a] UCLOCK MENU 1. uClock A_CLK in CDDA mode [7a] 2. uClock A_CLK in DVD mode [7b] FLASH MENU 1. Checksum FLASH [6] 2. Flash write access [10] I2C MENU 1. I2C NVRAM access [11] 2. I2C Display PWB [12] S2B MENU 1. S2B echo [13] 2. S2B pass-through [14] NVRAM MENU 1. NVRAM Config [34] 2. NVRAM reset [35] 3. NVRAM Mod [36] 4. NVRAM write/read [15]
2. Bedienvariante (C)ommand Die Bedienvariante (C)ommand ist Bestandteil des Servicetestprogramms. Nach der Eingabeaufforderung "DD>" ist die Nummer der Servicetestebene einzugeben und mit einem zu bestätigen. Eine Korrektur des eingetippten Befehls ist mit der Rücktaste möglich. Bei Eingabefehlern erscheint z.B. folgende Fehlermeldung: DD>123↵ 0001 Unknown command ER @ DD>
Anzeige bei keinem Gerätedefekt: DD>12↵ 1200 OK @ DD>
Anzeige bei Gerätedefekt: 2B UTILS MENU 1. I2C Scart Check [54] 2. Scart To DVD [55a] 3. Scart Pass through [55b] 4. Video Col Setup I2C [52] 5. Video Col Setup Hi [53a] 6. Video Col Setup Lo [53b]
DD>12↵ 1201 ER @ DD>
ist eine kurze englische Erklärung des aufgetretenen Fehlers.
STATISTICS INFO MENU 1. Total Nr of times Tray Open [47a] 2. Total Time Power On [47b] 3. Total Play-time CDDA & VCD [47c] 4. Total Play-time DVD [47d] VIDEO COLOURBAR MENU 1. Colourbar DENC on [23a] 2. Colourbar DENC off [23b] SCART MENU 1. Scart low [25a] 2. Scart medium [25b] 3. Scart high [25c]
Ķ2-6
GRUNDIG Service
GDV 200
3. Service-Testebenen Die Service-Testebenen 1 bis 5 sind nicht manuell aufrufbar. Diese werden beim Starten des PC-Systemtests entsprechend der Gerätebestückung automatisch aufgerufen. 1 (BasicSpAcc) Dieser Basis-Test ist Voraussetzung für eine korrekte Funktion der Diagnose Software. Es wird der RS232-Port initialisiert und eine Meldung ausgegeben, dass die Diagnose Software gestartet wurde. 2 (BasicInterconDram, BasicInterconSdram) Test der Verbindungen der Daten- und Adressleitungen des Prozessors. Dieser Test kann fehlerhafte (kurzgeschlossene) Adressleitungen erkennen und gibt aus, welche Leitung fehlerhaft ist. 3 (BasicDramWrR) Dieser Basis-Test ist Voraussetzung für eine korrekte Funktion der Diagnose Software. Es wird ein Mustertest des Teiles des DRAM durchgeführt, der von der Diagnose Software benutzt wird. Es werden dabei auch die Datenleitungen auf Fehler (Kurzschlüsse) getestet. Anmerkung: Dieser Test funktioniert nur, wenn ein DRAM installiert ist. 4 (BasicSdramWrR) Dieser Basis-Test ist Voraussetzung für eine korrekte Funktion der Diagnose Software. Es wird ein Mustertest des Teiles des SDRAM durchgeführt, der von der Diagnose Software benutzt wird. Es werden dabei auch die Datenleitungen auf Fehler (Kurzschlüsse) getestet. 5 (BasicSramWrR) Dieser Basis-Test ist Voraussetzung für eine korrekte Funktion der Diagnose Software. Es wird ein Mustertest des internen SDRAM des STi5505 (IC7200) durchgeführt. 6 (PapChksFl) Berechnet und überprüft die Checksumme des FLASH. 7a (PapUclkAclkCdda) Dieser Test schaltet die A_CLK-Leitung auf 11,2896MHz (CD_DA). Die korrekte Funktion kann nicht von der Diagnose Software erkannt werden, sondern muss extern überprüft werden (z.B. mit einem Frequenzzähler an Messpunkt F703). Anmerkung: Dieser Test arbeitet nur, wenn der externe Takt aktiviert ist. 7b (PapUclkAclkDvd) Dieser Test schaltet die A_CLK-Leitung auf 12,2880MHz (DVD). Die korrekte Funktion kann nicht von der Diagnose Software erkannt werden, sondern muss extern überprüft werden (z.B. mit einem Frequenzzähler an Messpunkt F703). Anmerkung: Dieser Test arbeitet nur, wenn der externe Takt aktiviert ist. 9 (PapDramWrR) Mustertest aller Speicherzellen im DRAM. Dieser Test kann Fehler in den DRAMS erkennen und auch feststellen, welches DRAM fehlerhaft ist. Die Ergebnisse des Tests sind nur dann gültig, wenn die Zugriffe auf die DRAMs korrekt funktionieren. Anmerkung: Dieser Test funktioniert nur, wenn ein DRAM installiert ist. 10 (PapFlashWrAcc) Liest die Chip Identifizierungsnummer. Der Test schreibt eine definierte Sequenz in das FLASH-RAM die es ermöglicht, die Identifizierungsnummer auszulesen. Anmerkung: Wenn die Diagnose Software im FLASH läuft, hängt sich dieser Test auf. Durch das Schreiben ins FLASH wird der OutputEnable-Pin auf HIGH gesetzt (Output disabled) und der Code im FLASH kann nicht weiter ausgeführt werden. Wenn dies geschieht war der Test offenbar erfolgreich. 11 (PapI2cNvram) Überprüft das I2C-Interface zum NVRAM indem von einer beliebigen Adresse gelesen wird. 12 (PapI2cDisp) Überprüft das I2C-Interface zum Slave-Prozessor auf der Displayplatte mit einem Echo-Befehl. 13 (PapS2bEcho) Überprüft das S2B-Interface zum Laufwerk mit einem Echo-Befehl.
GRUNDIG Service
Servicetestprogramm
14 (PapS2bPass) Schaltet den RS232-Port und den S2B-Port auf Durchgang. Der einzige Weg diesen Test zu beenden ist, den DVD-Spieler vom Netz zu trennen. 15 (PapNvramWrR) Nicht zerstörender Mustertest aller Speicherzellen im NVRAM. Dieser Test erkennt Fehler im NVRAM. 16 (CompSdramWrR) Mustertest aller Speicherzellen im SDRAM. Dieser Test kann Fehler in den SDRAMS erkennen und auch feststellen, welches SDRAM fehlerhaft ist. Die Ergebnisse des Tests sind nur dann gültig, wenn die Zugriffe auf die SDRAMs korrekt funktionieren. 18a (AudioDeempOn) Der Test aktiviert die Audio-Deemphase. Die korrekte Funktion ist von der Software nicht erkennbar, sondern durch externe Messungen zu überprüfen. 18b (AudioDeempOff) Der Test deaktiviert die Audio-Deemphase. Die korrekte Funktion ist von der Software nicht erkennbar, sondern durch externe Messungen zu überprüfen. 19a (AudioMuteOn) Der Test aktiviert die Audio-Mute-Funktion. Die korrekte Funktion ist von der Software nicht erkennbar, sondern durch externe Messungen zu überprüfen. Anmerkung: Die NF wird vom DAC gemutet. 19b (AudioMuteOff) Der Test deaktiviert die Audio-Mute-Funktion. Die korrekte Funktion ist von der Software nicht erkennbar, sondern durch externe Messungen zu überprüfen. Anmerkung: Die NF wird vom DAC gemutet. 20a (AudioPinkNoiseOn) Dieser Test generiert im STi5505 ein rosa Rauschen das durch den DAC in ein analoges Audio-Signal gewandelt wird. Die korrekte Funktion ist von der Software nicht erkennbar, sondern durch externe Messungen zu überprüfen. 20b (AudioPinkNoiseOff) Dieser Test deaktiviert das rose Rauschen, das durch den Test 20a aktiviert wurde. Die korrekte Funktion ist von der Software nicht erkennbar, sondern durch externe Messungen zu überprüfen. 21a (AudioSineOn) AudioSineOn erzeugt ein 1kHz-Sinussignal am Analog-Ausgang. Die Daten für dieses Sinussignal werden im Audio-Puffer des SDRAM gespeichert, durch den Audio-Decoder geschleift und ohne weitere Wandlung im DAC in ein analoges Audio-Signal umgeformt. Der einzige Weg diesen Test zu beenden ist, den DVD-Spieler vom Netz zu trennen. Die korrekte Funktion ist von der Software nicht erkennbar, sondern durch externe Messungen zu überprüfen. 21b (AudioSineBurst) AudioSineBurst erzeugt für ca. 4 Sekunden ein 1kHz-Sinussignal am Analog-Ausgang. Das Signal wird auf die gleiche Weise erzeugt wie bei AudioSineOn. Die korrekte Funktion ist von der Software nicht erkennbar, sondern durch externe Messungen zu überprüfen. 23a (VideoColDencOn) Der Test VideoColDencOn schaltet den Farbtestbalken im DENC des STi5505 ein. Die korrekte Funktion ist von der Software nicht erkennbar. 23b (VideoColDencOff) Der Test VideoColDencOff schaltet den Farbtestbalken im DENC des STi5505 aus. Die korrekte Funktion ist von der Software nicht erkennbar. 25a (VideoScartLo) Der Pin 8 der Euro-AV-Buchse wird auf LOW (0…0,5V) gesetzt. Die korrekte Funktion ist von der Software nicht erkennbar, sondern durch externe Messungen zu überprüfen. 25b (VideoScartMi) Der Pin 8 der Euro-AV-Buchse wird auf MEDIUM (6V ±10%) gesetzt. Die korrekte Funktion ist von der Software nicht erkennbar, sondern durch externe Messungen zu überprüfen. 2-7
Ķ
Servicetestprogramm
GDV 200
25c (VideoScartHi) Der Pin 8 der Euro-AV-Buchse wird auf HIGH (12V ±10%) gesetzt. Die korrekte Funktion ist von der Software nicht erkennbar, sondern durch externe Messungen zu überprüfen. 26 (DispVer) Liefert die Versionsnummer des Slave-Prozessors auf der EjectPlatte. 27 (DispKeyb) Überprüft, ob alle Tasten einmal gedrückt werden (beliebige Reihenfolge). Eine Rückmeldung über die gedrückte Taste gibt das Display des DVD-Spielers aus. Beenden des Tests durch Drücken der NEXTTaste für mindestens 1 Sekunde. 28 (DispRc) Zeigt auf dem Display Header-, System- und Kommandocode für jeden empfangenen Fernbedienbefehl. Ist die erste gedrückte Taste die PLAY-Taste wird dieser Test nicht durchgeführt, sondern es kann der Regionalcode geändert werden. Dieser Fernbedientest wird beendet durch Drücken der NEXT-Taste am Gerät. 29 (DispLed) Alle LEDs werden eingeschaltet bis die NEXT-Taste am Gerät gedrückt wird. 30 (DispDisplay) Zeigt Testmuster im Display des Gerätes bis die NEXT-Taste am Gerät gedrückt wird. Weiterschalten durch die einzelnen Testmuster mit den Tasten PLAY (vorwärts) und PAUSE (rückwärts). Anmerkung: Testmuster siehe Seite 2-2. 31 (LogReadErr) Auslesen des Fehlerprotokolls aus dem NVRAM und Ausgabe der Fehlernummern. 32 (LogReadBits) Auslesen der Fehlerbits aus dem NVRAM und Ausgabe, welche Bits gesetzt sind. Fehlerbeschreibung
Fehlerprotokoll Fehlerbits
33 (LogReset) Löschen des Fehlerprotokolls und der Fehlerbits im NVRAM. 34 (MiscReadConfig) In diesem Test werden die Konfigurationsdaten des DVD-Spielers aus dem NVRAM als RAW-Daten ausgelesen und ausgegeben. 35 (MiscNvramReset) Löscht das gesamte NVRAM. Nach dem Löschen des NVRAMs muss die Gerätefunktion wieder hergestellt werden (Seite 1-6)! 36 (MiscNvramMod) Auslesen und Ändern jeder beliebigen Speicherzelle im NVRAM. 37 (BeVer) Ausgabe der Versionsnummer des Laufwerks. 38a (BeFocusOn) Prüfung der Fokussierung des Lasers. 38b (BeFocusOff) Ausschalten des Fokussierungs-Tests (38a). 39a (BeDiscmotorOn) Disc-Motor einschalten. 39b (BeDiscmotorOff) Disc-Motor ausschalten. 40a (BeRadialOn) Radial-Regelschleife einschalten. 40b (BeRadialOff) Radial-Regelschleife ausschalten. 41a (BeSledgeIn) Pick-Up-Einheit nach innen fahren. 41b (BeSledgeOut) Pick-Up-Einheit nach außen fahren. 42a (BeGroovesIn) Laserpunkt bei eingelegter DVD-Disc auf die Innenspur fahren. 42b (BeGroovesMid) Laserpunkt bei eingelegter DVD-Disc in Mittelstellung fahren.
Befehl in diesem Status nicht erlaubt oder unbekannt
150101
8
Parameter nicht gültig für Befehl
150102
7
Schlitten konnte nicht in Ausgangsposition gebracht werden
150103
6
Fokussierungsfehler
150104
5
Motor kam nicht auf Geschwindigkeit innerhalb der vorgegebenen Zeit
150105
4
Servo konnte nach mehreren Versuchen die Spur nicht finden
150106
3
44 (BeReset) Kompletter Reset des Laufwerks.
PLL konnte nicht auf Zugriff oder Tracking synchronisieren
150107
2
46 (MiscApplVer) Auslesen der Versionsnummer der Bediensoftware aus dem NVRAM.
Subcode oder Sektor konnte nicht gelesen werden
150108
1
42c (BeGroovesOut) Laserpunkt bei eingelegter DVD-Disc auf die Außenspur fahren. 43a (BeTrayIn) Schublade schließen. 43b (BeTrayOut) Schublade öffnen.
47a (MiscTrayOpenNr) Auslesen aus dem NVRAM, wie oft die Schublade offen war.
Gewünschter Subcode nicht gefunden
150109
16
Schublade konnte nicht vollständig geöffnet oder geschlossen werden
15010A
15
TOC konnte nicht rechtzeitig gelesen werden
15010B
14
Eingabe als eine Suchfunktion nicht möglich
15010C
13
47c (MiscPlayTimeCddaVcd) Auslesen der Laufzeit des Laufwerks im CDDA-Modus aus dem NVRAM.
Datenpfad versucht auf einen nicht existenten Einlaufbereich Zugriff zu nehmen
15010D
12
47d (MiscPlayTimeDvd) Auslesen der Laufzeit des Laufwerks im DVD-Modus aus dem NVRAM.
Nicht existierender Burst angefordert
15010E
11
S2b Kommunikations-Fehler
1501F0
10
S2b Kommunikations-Fehler
1501F1
9
S2b Kommunikations-Fehler
1501F3
24
S2b Kommunikations-Fehler
1501F4
23
S2b Kommunikations-Fehler
1501F5
22
Kommunikationsfehler mit STi 5505
90000
32
Kommunikationsfehler mit STi 5505
90001
31
Kommunikationsfehler mit Displayprozessor
190000
40
Ķ2-8
47b (MiscPowerOnTime) Auslesen der Einschaltzeit aus dem NVRAM.
55a (VideoScartSwDvd) Signalweg von DVD zu TV freigeschaltet. 55b (VideoScartSwPass) Signalweg von AUX zu TV freigeschaltet.
GRUNDIG Service
GDV 200
GB
Service Test Programme
2. Manual System Test
Service Test Programme
The Service Test Programme is divided into 3 different parts: – Automatic System Test – Manual System Test – PC System Test The basis of these System Tests are the Service Test Levels, which are carried out automatically with the respective test or can be called up manually. The keys illustrated below are located on the left side of the magnetically fixed cover. Stop (4)
Pause (3)
The Manual System Test is a possibility to check which of the modules (Keyboard Control Unit, DVD Monoboard or Drive Mechanism) is faulty. In addition to that, it is possible to check all ERRORS by reading the ERROR log and the ERROR bits, including the ERRORS which have appeared in the normal use of the DVD-Player. At the end of the Manual System Test a Loop Test is started (the Service Test Levels of the Automatic System Test are running in an endless loop). For this test the DVD-Player has to be connected to a TV Set (PAL or Multisystem), to control the results of the Service Test Levels. To check the results of some Service Test Levels, the System Test requires interactive actions from the user (e.g. confirmation of a testpicture or a testsound). For some levels (e.g. levels for testing the Drive Mechanism functions) the DVD-Player has to be opened to control the function of the moveable components. The test only checks functions, which can be checked by the Service Test Software.
Open / Close (5)
Previous (2)
Start of the Manual System Test Next (1)
Play (0)
Press 2 keys simultaneously + Switch power ON
Interactive Test
Keyboard Control Unit
1. Automatic System Test
Display Test
With the Automatic System Test the hardware of the DVD-Player can be checked without further equipment. During the Automatic System Test the Service Test Levels, which are listed in the table, are called and executed. If the DVD-Player is faulty, "Error" is shown on the display and the Service Test Levels have to be executed with the Manual System Test or the PC System Test.
29 (DispLed)
Keyboard Test
27 (DispKeyb)
Remote Control Test
Picture Test 1 EURO-AV Loop Test Sound Test 2 Colour Setup Test
Press 2 keys simultaneously + Connect to mains
Tray Test
SET OK
NO
23a (VideoColDencOn/Off) 20a (AudioPinkNoiseOn) 54a (VideoScartSwDvd) 54b (VideoScartSwPass) AudioSinOn 53a (VideoColSetupHi) 53b (VideoColSetupLo)
Basic Engine Version Number
During the test, the display shows the number of Levels which have to be tested.
28 (DispRc)
DVD Monoboard
Sound Test 1 / DVD-EURO-AV Test
Start of the Automatic System Test
30 (DispDisplay)
LED Test
L
C
R
Sledge Test
D VD
37 (BeVer) 43a/b (BeTrayOut/In) 41a/b (BeSledgeOut/In)
DIGITAL SURROUND SL
L
SW
C
SR
R
TITLE VCD
CHAPTER SCAN A-B
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
C
R
38a (BeFocusOn)
Radial Test
40a (BeRadialOn)
Jump Test
42a/b/c (BeGroovesIn/Mid/Out)
Tray Test
43a/b (BeTrayOut/In)
TIME TRACK
YES L
D VD
DIGITAL SURROUND SL
SW
SR
39a (BeDiscMotorOn)
Focus Test D VD
DIGITAL SURROUND SL
Disc Motor Test
TITLE VCD
CHAPTER SCAN A-B
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
Error Log & -Bits
31 (LogReadErr) 32 (LogReadbits)
To exit Automatic Systemtest: disconnect the VCR from the mains Loop Test
Number Nucleus on display
Description
9
VideoColSetupComm Checks the I2C interface with the IC7316 on the AV-MUX Board
8
VideoScartSwComm
Checks the I2C interface with the IC7305 on the AV-MUX Board
7
PapChksFl
Calculate and verify checksum FLASH memory
6
PapDramWrR
Pattern test of all locations in the DRAM(s)
5
Papl2cDisp
Checks the I2C interface with the slave processor on the display PCB
4
PapS2bEcho
Checks the I2C interface to the drive mechanism
3
Papl2cNvram
Checks the I2C interface with the NVRAM
2
PapNvramWrR
Pattern test of all locations in the NVDRAM
1
CompSdramWrR
Pattern test of all locations in the SDRAM(s)
GRUNDIG Service
Disconnect the VCR from the mains to end player test
2.1 Interactive Tests 2.1.1 Keyboard Control Unit Display Test Service Test Level: DispDisplay By showing a series of test patterns on the local display, the local display is tested. To step through all different patterns, the user must either press PLAY (pattern is OK) or PAUSE (pattern was incorrect) to proceed to the next pattern. The display of patterns is continued cyclically manner until the user presses NEXT. Note that a different sample pattern is used here to show all different display patterns. All other pattern in this document are simplified for essentials. If the user presses NEXT before all display patterns are tested, it will cause an error in the overall result of the System Test. 2-9
ķ
Service Test Programme
C
L
GDV 200
The user can manually check this code by using a code-table for the remote control key-codes.
D VD
R
DIGITAL SURROUND SL
SW
TITLE
SR
VCD
CHAPTER SCAN A-B
if OK, press PLAY C
L
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
if Not OK, press PAUSE
RC Key ID
D VD
R
DIGITAL SURROUND SL
SW
TITLE
SR
VCD
CHAPTER SCAN A-B
if OK, press PLAY L
C
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
TRACK TITLE
TIME TRACK
if Not OK, press PAUSE
D VD
R
DIGITAL SURROUND SL
SW
TITLE
SR
VCD
CHAPTER SCAN A-B
if OK, press PLAY
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
if Not OK, press PAUSE
press NEXT to continue
LED Test Service Test Level: DispLed During this test the red LEDs must be lit; if it is, press PLAY, if it is not lit up press PAUSE. By pressing NEXT the script will proceed to the next test. If the user presses NEXT before PLAY or PAUSE, it will cause an error in the overall result of the System Test. Keyboard Test Service Test Level: DispKeyb The user must press all keys on the local keyboard once. The code of the key pressed is shown on the local display (hexadecimal) immediately followed by a (hexadecimal) number indicating how many times that key has been pressed. The display always shows the code numbers of the last 3 pressed keys (from the beginning of the test). Example of the local display during this test:
Hexadecimal code C 31 2C 30 22 20 21 58 59 5A 5b 5C 0 1 2
STANDBY STOP PLAY PAUSE SLOW NEXT PREVIOUS CURSOR UP CURSOR DOWN CURSOR LEFT CURSOR RIGHT OK 0 1 2
C
R
L
if OK:
C
SW
R
C
SR
D VD
R
TITLE
CHAPTER SCAN A-B
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
TITLE
CHAPTER SCAN A-B
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
VCD
D VD
DIGITAL SURROUND SL
SW
SR
VCD
DIGITAL SURROUND SL
tb: 01: 51: 52:
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
Pressing NEXT on the local keyboard again will proceed to the next test.
Keyboard test key PLAY pressed 3 times key OPEN/CLOSE pressed the first time key OPEN/CLOSE pressed the second time Key ID.
2.1.2 DVD Monoboard Picture Test 1 Service Test Level: VideoColDencOn A colour bar is generated on the TV screen. The display will show the following message:
Key
0 1 2 3 4 5 6 7 8 9 A b
PLAY NEXT PREVIOUS PAUSE STOP REPEAT FTS SCAN BACKWARD OPEN / CLOSE FORWARD SHUFFLE
L
C
L
R
L
if Not OK:
SR
C
R
SW
SR
D VD
TITLE VCD
CHAPTER SCAN A-B
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
Audio test 1 Service test level: AudioPinkNoisOn/Off (optional) During the Audio test 1, a pink noise is generated. The display indicates. C
R
D VD
DIGITAL SURROUND
TITLE VCD
CHAPTER SCAN A-B
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
D VD
DIGITAL SURROUND SL
R
SR
By pressing PLAY the user confirms the test, pressing PAUSE will indicate the picture was invisible or incorrect. Pressing NEXT will proceed to the next test; if the user presses NEXT without pressing PLAY or PAUSE first, the result of this test will be FALSE.
L
SW
SW
D VD
DIGITAL SURROUND SL
C
DIGITAL SURROUND SL
If any key is detected more than once (due to hardware error), the keycode is displayed twice (or more), with the second digit increased by 1. The user can leave the keyboard test by pressing the NEXT key on the local display of the DVD player for at least one full second. The result of the keyboard test is shown on local display as follows:
if OK:
3 4 5 6 7 8 9 TOGGLE ANGLE AUDIO SUBTITLES ROOT MENU OSD ON/OFF RETURN SHUFFLE
DIGITAL SURROUND SL
if Not OK:
D VD
Hexadecimal code 3 4 5 6 7 8 9 C8 85 4E 4b 54 F 83 1C
The user can leave the remote-control test by pressing NEXT on the local keyboard of the DVD player. The remote control test is successful if a code was received before the user pressed the NEXT key; pressing the NEXT key before pressing a key on the remote control results in an error in the remote control test. After pressing NEXT, the result of the remote control test is displayed on the local display of the DVD player as follows:
L
L
RC Key ID
TITLE VCD
CHAPTER SCAN A-B
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
SL
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
Press the PLAY button to confirm that the tone is audible. This mutes the tone. Press the PAUSE button to tell the unit that the tone was not audible or distorted.
Pressing NEXT on the local keyboard again will proceed to the next test. Remote Control Test Service Test Level: DispRc The user must press any key on the remote control just once. The code of the key pressed will be shown on the local display in hexadecimal format as long as the key is pressed. L
C
R
D VD
DIGITAL SURROUND SL
ķ 2 - 10
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
GRUNDIG Service
GDV 200
Service Test Programme
Use the NEXT button to switch to the next test. Pressing the NEXT button too soon will falsify the test result.
2.1.3 Drive Mechanism
Scart DVD test During the Scart DVD test, a colour bar test pattern and a tone with pink noise are generated. The display indicates:
Version Number Service Test Level: BeVer In the Drive Mechanism tests, the version number of the Drive Mechanism will be shown first, as the following example:
L
C
R
D VD L
DIGITAL SURROUND SL
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
Press the PLAY button to confirm that the tone is audible. This mutes the tone. Press the PAUSE button to tell the unit that the test has failed. Use the NEXT button to switch to the next test. Pressing the NEXT button too soon will falsify the test result. Scart loop test During the Scart loop test, the picture- and sound signal is looped through from the AUX/VCR IN socket to the TV set. The display indicates: L
C
R
C
R
D VD
DIGITAL SURROUND SL
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
By pressing the NEXT key, the Drive Mechanism tests are started. Tray Test Service Test Level: BeTrayOut/In First, the tray is tested. The purpose of this test is also to give the user the possibility to put a disc in the tray of the DVD player. Some tests on the Drive Mechanism require that a disc is present in the player. At the end of the Drive Mechanism tests this tray test will be repeated solely to enable the user to remove the disc in the tray. The local display will look as follows:
D VD
DIGITAL SURROUND SL
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
L
C
R
D VD
DIGITAL SURROUND SL
Press the Previous button to switch back to the Scart DVD test. Press the NEXT button to switch to the next test. Audio test 2 Service test level: AudioSinOn During the Audio test 2, a sinewave tone 1kHz is generated. The display indicates: L
C
R
D VD
DIGITAL SURROUND SL
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
Press the STOP button to end the tests. Press the PLAY button to confirm that the tone is audible. Press the PAUSE button to tell the unit that the tone was not audible or distorted. Use the NEXT button to switch to the next test. Pressing the NEXT button too soon will falsify the test result. Colour set-up test During the Colour set-up test, a colour bar test pattern is generated. The display indicates:
L
C
R
D VD
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
By pressing PLAY or PAUSE the user can toggle the position of the tray. The user should close the tray at the end of this test. Note that this test will not contribute to the test result of the Drive Mechanism. Pressing NEXT will proceed to the next test. Sledge Test (visual test) Service Test Level: BeSledgeOut/In The second Drive Mechanism test tests the sledge; the user can move the sledge as many times as desired by using PLAY (Level BeSledgeOut) and PAUSE (Level BeSledgeIn). Pressing NEXT on the local keyboard proceeds to the next test. Note that this test will not contribute to the test result of the Drive Mechanism. The local display will look as follows during the sledge test: L
C
R
D VD
DIGITAL SURROUND SL
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
Disc Motor Test (visual test) Service Test Level: BeDiscMotorOn/Off The third Drive Mechanism test tests the disc motor; the local display looks as follows:
DIGITAL SURROUND SL
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK L
C
R
D VD
DIGITAL SURROUND
Use the NEXT button to switch to the next test. The display indicates: L
C
R
D VD
DIGITAL SURROUND SL
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
Press the Previous button to switch back to the COLSETUP HI test. Pressing the PLAY button tells the unit that the colour bar test pattern was visible. Pressing the PAUSE button tells the unit that the picture was distorted. Use the NEXT button to switch to the next test. Pressing the NEXT button too soon will falsify the test result.
SL
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
By pressing PLAY the user confirms that the disc motor is running; pressing PAUSE indicates the disc motor does not work. Pressing NEXT proceeds to the next test. If the user presses NEXT before pressing PLAY or PAUSE, the result of this test will be FALSE. Focus Test (listening test, with CD) Service Test Level: BeFocusOn/Off The fourth Drive Mechanism test tests the focussing function. The display will look as follows: L
C
R
D VD
DIGITAL SURROUND SL
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
By pressing PLAY the user confirms that focussing was succesful; pressing PAUSE indicates a focussing failure. Pressing NEXT proceeds to the next test; if NEXT is pressed before PLAY or PAUSE, the result of this test will be false. Radial Test (visual & listening test, with CD) Service Test Level: BeRadialOn/Off The fifth Drive Mechanism test tests the radial functionality; the local display looks as follows: L
C
R
D VD
DIGITAL SURROUND SL
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
By pressing PLAY the user confirms that the radial function works; pressing PAUSE indicates the function does not work. Pressing NEXT proceeds to the next test. If the user presses NEXT before pressing PLAY or PAUSE, the result of this test will be FALSE.
GRUNDIG Service
2 - 11
ķ
Service Test Programme
GDV 200
Jump Test (listening test, with CD) Service Test Level: BeGroovesIn/Mid/Out The sixth and last Drive Mechanism test tests the jumping. During this test, the local display looks as follows: L
C
R
000 001 010 011 100 101 110 111
D VD
DIGITAL SURROUND SL
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
The user can switch between the three different types of groove settings by pressing PLAY (forward in the list In-Mid-Out) or PAUSE (backward in the list In-Mid-Out). This is done in a cyclic manner; note that this test will not contribute to the test result of the Drive Mechanism. Pressing NEXT proceeds to the next test. Tray Test Service Test Level: BeTrayOut/In At the end of the Drive Mechanism tests, the tray test is repeated. The local display will look as follows: L
C
R
D VD
DIGITAL SURROUND SL
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK SHUFFLE REPEAT
FTS TOTAL CHAPTER
TRACK TITLE
The loop test will perform the same Levels as the Automatic System Test, but it will loop through the list of Levels. The display of the DVD player will display not only the three digits indicating correct/faulty modules and the last found error code (as mentioned, earlier faults are detected as far as they can be within the scope of the diagnostic software), but also a loop counter indicating how many times the loop has been gone through. Example:
TIME TRACK
module
This test is meant to give the user the possibility to remove the disc in the tray. The tray position can be toggled using the PLAY and PAUSE key. The user must close the tray before proceeding to the next test with the NEXT key.
2.2 Error Log and Error Bits Error Log Service Test Level: LogReadErr Reading the error log and error bits information can be useful to determine any errors that occurred recently during normal operation of the DVD player. The display during the errorlog readout looks as follows :
Indication for each module Basic Mono Keyboard Control Unit Engine Board ok ok ok ok ok faulty ok faulty ok ok faulty faulty faulty ok ok faulty ok faulty faulty faulty ok faulty faulty faulty
Displayed Value
FTS
TITLE
loops
error code
SHUFFLE PAUSE SCAN A - B TRACK CHAPTER
REPEAT CHAPTER TITLE TRACK TOTAL REM TRACK TIME
DV D VCD 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 +
The number after the hyphen indicates the number of times the loop test has been performed. The 4 digits at the right side of the display show the last error that was found when running the loop test: the two digits on the left indicate which Level resulted in a fault; the two digits on the right refer to the error code within that Level. For further explanation of this error code, see list of error codes. Error codes during Loop Test: Error Code
Level No.
0601
6
0901
9
The DVD DRAM is faulty
By pressing PLAY or PAUSE the user can move forward or backward (respectively) through the logged error codes. The highlighted number indicates which error code is currently on display (in the example above, error code number 4 is displayed). If “0000” is displayed at all positions, the error log is empty. Display of the logged errors is done in a cyclic manner. The error code with the lowest highlighted number is the most recent. By pressing NEXT on the local keyboard, the user can proceed to the next test. See page 3-18 for ERROR LOG information.
1104
11
I2C bus busy before start
1102
11
NVRAM access time-out
1103
11
No NVRAM Acknowledge
1104
11
NVRAM reply time-out
1201
12
I2C bus busy
1202
12
I2C bus not working
1203
12
Slave controller not working
1204
12
Slave response is not correct
1301
13
Parity error from basic engine to serial
Error Bits Reading the error bits is done in the Level ReadBits. The display during the error bits readout looks as follows:
1302
13
Parity error from serial to basic engine
1303
No communication between serial and basic engine
1304
13 13
1601
16
The SDRAM is faulty
L
C
R
D VD
DIGITAL SURROUND SL
L
SW
C
SR
R
TITLE VCD
CHAPTER SCAN A-B
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
D VD
Error Description Calculated checksum of FLASH is not correct
Communication time-out error
DIGITAL SURROUND SL
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
Only the set errorbits will be shown by their (decimal) number. Refer to page 3-18 for the explanation of each bit number. If the display only shows “EB-0”, no error bits were set. By pressing NEXT the user can continue to the next test.
2.3 Loop Test At the start of the loop test, the display will show the result of the interactive player test: L
C
R
D VD
DIGITAL SURROUND SL
SW
SR
TITLE VCD
CHAPTER SCAN A-B
TRACK REPEAT SHUFFLE
FTS TOTAL CHAPTER
TRACK TITLE
TIME TRACK
The left side of the display contains a 3-digit code, which can have a value between 000 and 111. These values are to be interpreted as follows:
ķ 2 - 12
GRUNDIG Service
GDV 200
Service Test Programme
Pressing at the prompt without any further input at the terminal will always rebuild the main menu.
PC System Test Hardware required: – Service PC – one free COM port (COM 1) on the Service PC – special cable (Service Serial Interface – RS232)
7654 321
RS232 SOCKET BACKSIDE VIEW 1 = TX1P 2 = IACK5N 3 = RX1P 4 = RTSEX 5 = GROUND 6 = CTS1P 7 = +5V PHR-7 CONNECTOR
Software required: – terminal emulation programme (e.g. OS2 WarpTerminal or Procomm in Windows 95) The free COM port must be connected via a special cable to the RS232 port of the DVD player. This special cable will also connect the test pin, which is available on the connector, to ground (i.e. activate test pin). Activate the terminal emulation programme and check that the port settings for the free COM port are: 19200 bps, 8 data bits, no parity, 1 stop bit and no flow control. Activation of the operating variants Switch the player on and the following text will appear on the screen of the terminal (programme): DVDv2B Diagnostic Software version 1.0 SDRAM Interconnection test passed Basic Sdram test passed. Karaoke init OK (M)enu, (C)ommand (S)2B–interface or (D)ownload? [M]:@
The first line indicates that the Diagnostic software has been activated and contains the version number of the diagnostic. The next two lines are the succesful result of two subsequent basic tests (Level 2 and 4 respectively); see “Service Test Levels" for an explanation of these Level. If not all these messages appear on the terminal screen, then the related Levels found an error. The fourth line is the prompt asking to choose for an interface form ((M)enu or(C)ommand and then ) Ending of an interface To switch between interfaces, the DVD player needs to be switched off and on again.
1. Operating variant (M)enu The Operating variant (M)enu is part diagnostic mode. A selection can be given by the user by typing the number of the menuitem chosen at the prompt. Each entry must be terminated with a . Invalid selections will cause an error message by the Menu Handler. Example: Select> 9 Invalid menu choice, number out of range ER @ Press RETURN to continue...@
Result and output of an activated (and terminated) Level will be sent back to the service terminal according to the standard layout as defined in point 3.2. Example:
1.1 Layout of menus and submenus for the Service Terminal NOTE: a symbol “–>” in the next menu layouts indicates that specific menu choice will invoke the display of a submenu. The number in brackets is the number of the Service Test Level (point 3). Main Menu MAIN MENU 1. Audio –> 2. Basic engine –> 3. Display PWB –> 4. Processor & Peripherals –> 5. Karaoke –> 6. Log –> 7. Miscellaneous –> 8. Video –>
Submenu level 1 AUDIO MENU 1. Deemphasis –> 2. Mute –> 3. PinkNoise –> 4. SineWave –> BASIC ENGINE MENU 1. Disc Motor –> 2. Focus –> 3. Grooves –> 4. Radial –> 5. Reset [44] 6. Sledge –> 7. Tray –> 8. Version [37] DISPLAY PWB MENU 1. Display [30] 2. Keyboard [27] 3. LEDs [29] 4. Remote control [28] 5. Version [26] PROCESSOR AND PERIPHERALS MENU 1. Clock –> 2. DRAM Write/Read [9] 3. Flash –> 4. I2C –> 5. S2B –> 6. SDRAM Write/Read [16] KARAOKE MENU 1. Karaoke Mode Off [48a] 2. Karaoke Mode On [48b] 3. Karaoke Mic Input [49] 4. Karaoke Key On [50a] 5. Karaoke Key Off [50b] 6. Karaoke Echo On [51a] 7. Karaoke Echo Off [51b] LOG MENU 1. Read last errors [31] 2. Read error bits [32] 3. Reset [33] MISCELLANEOUS MENU 1. NVRam Utils –> 2. 2B Utils –> 3. Statistics Info –> 4. Read Application version [46]
Select> 6 1600 OK @ Press RETURN to continue…@
After the user presses , the current menu is rebuilt on screen.
GRUNDIG Service
2 - 13
ķ
Service Test Programme
VIDEO MENU 1. Colourbar –> 2. Scart –>
GDV 200
SCART MENU 1. Scart low [25a] 2. Scart medium [25b] 3. Scart high [25c]
Submenu level 2 DEEMPHASIS MENU 1. Deemphasis On [18a] 2. Deemphasis Off [18b] MUTE MENU 1. Mute on [19a] 2. Mute off [19b]
1.2 Screen layout with menus When menus are used, no specific screen layout can be given: menu information will not be in a special format, except for the layout as mentioned in the previous paragraphs. A typical menu session can look as follows: DVDv2B Diagnostic Software version 0.6
NOISE MENU 1. Pink Noise on [20a] 2. Pink Noise off [20b]
SDRAM Interconnection test passed Basic Sdram test passed. Karaoke init OK
SINEWAVE MENU 1. Audio Sine on [21a] 2. Audio Burst on [21b]
(M)enu, (C)ommand (S)2B–interface or (D)ownload? [M]:@ M ↵
DISC MOTOR MENU 1. Disc motor on [39a] 2. Disc motor off [39b] FOCUS MENU 1. Focus on [38a] 2. Focus off [38b] GROOVES MENU 1. Jump grooves to inside [42a] 2. Jump grooves to middle [42b] 3. Jump grooves to outside [42c] RADIAL MENU 1. Radial control on [40a] 2. Radial control off [40b] SLEDGE MENU 1. Sledge inwards [41a] 2. Sledge outwards [41b]
MAIN MENU 1. Audio –> 2. Basic engine –> 3. Display PWB –> 4. Processor & Peripherals –> 5. Karaoke –> 6. Log –> 7. Miscellaneous –> 8. Video –> Select> 4 ↵ PROCESSOR AND PERIPHERALS MENU 1. Clock –> 2. DRAM Write/Read [9] 3. Flash –> 4. I2C –> 5. S2B –> 6. SDRAM Write/Read [16] Select> 3 ↵
TRAY MENU 1. Open tray [43b] 2. Close tray [43a] UCLOCK MENU 1. uClock A_CLK in CDDA mode [7a] 2. uClock A_CLK in DVD mode [7b] FLASH MENU 1. Checksum FLASH [6] 2. Flash write access [10] I2C MENU 1. I2C NVRAM access [11] 2. I2C Display PWB [12] S2B MENU 1. S2B echo [13] 2. S2B pass-through [14] NVRAM MENU 1. NVRAM Config [34] 2. NVRAM reset [35] 3. NVRAM Mod [36] 4. NVRAM write/read [15] 2B UTILS MENU 1. I2C Scart Check [54] 2. Scart To DVD [55a] 3. Scart Pass through [55b] 4. Video Col Setup I2C [52] 5. Video Col Setup Hi [53a] 6. Video Col Setup Lo [53b] STATISTICS INFO MENU 1. Total Nr of times Tray Open [47a] 2. Total Time Power On [47b] 3. Total Play-time CDDA & VCD [47c] 4. Total Play-time DVD [47d]
2. Operating variant (C)ommand The Operating variant (C)ommand is part of diagnostic mode. The commands that can be given the numbers of the Service Test Level (point 3). A command must be terminated with a character from the control PC. When typing commands, the backspace key can be used to make corrections. In case of typing errors in the command, an error message is returned. Example: DD>123↵ 0001 Unknown command ER @ DD>
Example in case the DVD-Player is correct: DD>12↵ 1200 OK @ DD>
Example in case the DVD-Player is faulty: DD>12↵ 1101 DD>
ER @
is a short explanation of the fault.
VIDEO COLOURBAR MENU 1. Colourbar DENC on [23a] 2. Colourbar DENC off [23b]
ķ 2 - 14
GRUNDIG Service
GDV 200
3. Service Test Levels The service test levels 1 to 5 cannot be called up manually. They are called up automatically as a function of the unit’s equipment when starting the PC system test. 1 (BasicSpAcc) This is a Basic Diagnostic Nucleus required for correct operation of the Diagnostic Software. Checks and initialises RS232 port and outputs a message that the Diagnostic software has been started. 2 (BasicInterconDram, BasicInterconSdram) Interconnection test of the address/data lines from and to the processor. This nucleus can detect stuck at fault and permanent coupling errors in the address lines and will give an indication which lines are faulty. 3 (BasicDramWrR) This is a Basic Diagnostic Nucleus required for correct operation of the Diagnostic Software. It performs a pattern test (checkerboard) of only that part of the DRAM which is required by the Diagnostic Software. It automatically includes a test of the data lines in which stuck at faults and permanent coupling errors can be detected. Note: This test will only work when a DRAM is available.
Service Test Programme
14 (PapS2bPass) Switches the RS232 port and the S2B port in pass-through mode. The only way to exit this nucleus is via disconnected the DVD player from the mains. 15 (PapNvramWrR) Non destructive pattern test (checker board) of all locations in the NVRAM. This nucleus can detect stuck at faults and permanent coupling errors in the NVRAM chip. 16 (CompSdramWrR) Pattern test (checker board) of all locations in the SDRAM. This Nucleus can detect stuck at fault and permanent coupling errors in an SDRAM chip and will give an indicates if the SDRAM chip is faulty. The conclusion of this test is only valid under the assumption that the access to the SDRAM is OK. 18a (AudioDeempOn) Diagnostic Nucleus AudioDeempOn switches the audio de-emphasis on. Correct operation cannot be detected by the Diagnostic Software but must be checked externally. 18b (AudioDeempOff) Diagnostic Nucleus AudioDeempOff switches the audio de-emphasis off. Correct operation cannot be detected by the Diagnostic Software but must be checked externally.
4 (BasicSdramWrR) This is a Basic Diagnostic Nucleus required for correct operation of the Diagnostic Software. It performs a pattern test (checkerboard) of only that part of the SDRAM which is required by the Diagnostic Software. It automatically includes a test of the data lines in which stuck at faults and permanent coupling errors can be detected.
19a (AudioMuteOn) Diagnostic Nucleus AudioMuteOn switches the audio mute on. Correct operation cannot be detected by the Diagnostic Software but must be checked externally. Note: The audio will be muted by the DAC.
5 (BasicSramWrR) This is a Basic Diagnostic Nucleus required for correct operation of the Diagnostic Software. It performs a pattern test (checkerboard) of the internal SRAM of the STi5505 (IC7200).
19b (AudioMuteOff) Diagnostic Nucleus AudioMuteOff switches the audio mute off. Correct operation cannot be detected by the Diagnostic Software but must be checked externally. Note: The audio will be muted by the DAC.
6 (PapChksFlash) Calculate and verify checksum FLASH 7a (PapUclkAclkCdda) Diagnostic Nucleus PapUclkAclkCdda Switches clock A_CLK from the microclock to 11.2896MHz (CD_DA). Correct operation cannot be detected by the Diagnostic Software but must be checked with external equipment (e.g. a frequency counter at testpoint F703). Note: This nucleus will only work if the external clock is enabled. 7b (PapUclkAclkDvd) Diagnostic Nucleus PapUclkAclkDvd Switches clock A_CLK from the microclock to 12.2880MHz (DVD). Correct operation cannot be detected by the Diagnostic Software but must be checked with external equipment (e.g. a frequency counter at testpoint F703). Note: This nucleus will only work if the external clock is enabled. 9 (PapDramWrR) Pattern test (checker board) of all locations in the DRAM(s). This Nucleus can detect stuck at fault and permanent coupling errors in a DRAM chip and will give an indication if and which DRAM chip is faulty. The conclusion of this test are only valid under the assumption that the access to the DRAM is OK. Note: This test will only work when a DRAM is available. 10 (PapFlashWrAcc) Reads out the Chip Identification Number. This nucleus tests the write access by writing a defined sequence of data to the FLASH chip, to be able to read the FLASH ID. Note: If the diagnostic software runs from FLASH, this test will hang. By writing to FLASH memory, the FLASH output-enable-pin is set high (output disabled) and the code which sits in FLASH memory can not continue to be executed. However, if the test hangs the output enable pin is high, and the test apparently was successful. 11 (PapI2cNvram) Checks the I2C interface with the NVRAM by reading from an arbitrary address. 12 (PapI2cDisp) Checks the I2C interface with the slave processor on the display PWB with the echo command. 13 (PapS2bEcho) Checks the S2B interface to the Drive Mechanism with an ‘echo’ command. GRUNDIG Service
20a (AudioPinkNoiseOn) Diagnostic Nucleus AudioPinkNoiseOn will generate internally on the STi5505 a pinknoise which will be passed to the DAC were it is converted to an analogue audio signal. Correct operation cannot be detected by the Diagnostic Software but must be checked externally. 20b (AudioPinkNoiseOff) Diagnostic AudioPinkNoiseOff will switch off the pinknoise generated with AudioPinkNoiseOn. Correct operation cannot be detected by the Diagnostic Software but must be checked externally. 21a (AudioSineOn) Nucleus AudioSineOn will generate a sine signal of 1kHz on the analogue output. The sine signal digital data are stored in the audio buffer in SDRAM, passed through the audio decoder and without any further processing to the audio DAC were it is converted to an analogue audio signal. The signal can be stopped by disconnect the DVD player from the mains. Correct operation cannot be detected by the Diagnostic Software but must be checked externally. 21b (AudioSineBurst) Nucleus AudioSineBurst will generate a sine signal of 1kHz on the analogue output that lasts for about four seconds. The generation of the signal is the same as in AudioSineOn. Correct operation cannot be detected by the Diagnostic Software but must be checked externally. 23a (VideoColDencOn) Diagnostic Nucleus VideoColDencOn enables colour bar in the DENC in the STi5505. Correct operation cannot be detected by the Diagnostic Software but must be checked externally. 23b (VideoColDencOff) Diagnostic Nucleus VideoColDencOff disables colour bar in the DENC in the STi5505. Correct operation cannot be detected by the Diagnostic Software but must be checked externally. 25a (VideoScartLo) VideoScartLo steers pin 8 on the Euro AV connector with the value Low (0 to 0.5V). 2 - 15
ķ
Service Test Programme
GDV 200
Correct operation cannot be detected by the Diagnostic Software but must be checked externally.
33 (LogReset) Reset all error log and bits in the NVRAM.
25b (VideoScartMi) VideoScartMi steers pin 8 on the Euro AV connector with the value Medium (6V ±10%). Correct operation cannot be detected by the Diagnostic Software but must be checked externally.
34 (MiscReadConfig) Read configuration area from NVRAM and output as raw data.
25c (VideoScartHi) VideoScartHi steers pin 8 on the Euro AV connector with the value High (12V ±10%). Correct operation cannot be detected by the Diagnostic Software but must be checked externally. 26 (DispVer) Get version number of the slave processor on the Eject PWB. 27 (DispKeyb) Checks that all keys will be pressed once (arbitrary sequence). Feed back will be given via the local display for each key that has been pressed. The test will be terminated by pushing the NEXT key for at least 1 second. 28 (DispRc) Displays Header, System and Command code for each received RC code on the local display. If the first key that is pressed is the PLAY-key, the remote control test will not be executed, but the region code can be changed. The remote control test can be left by pressing the NEXT key on the local keyboard.
35 (MiscNvramReset) Reset the whole NVRAM to zero. After resetting the NVRAM the Player must be reactivated (page 1-6)! 36 (MiscNvramMod) Read/Modify any location in NVRAM. 37 (BeVer) Get version number of the Drive Mechanism. 38a (BeFocusOn) Diagnostic Nucleus BeFocusOn puts the laser of the BE into focus (focus loop). 38b (BeFocusOff) Diagnostic Nucleus BeFocusOff switches the focus loop off. 39a (BeDiscmotorOn) BeDiscmotorOn switches the disc motor (=spindle motor) on 39b (BeDiscmotorOff) BeDiscmotorOff switches the disc motor (=spindle motor) off 40a (BeRadialOn) Diagnostic Nuclei BeRadialOn closes the radial loop
29 (DispLed) Lights all local LEDs until the NEXT key on the local keyboard is pressed.
40b (BeRadialOff) Diagnostic Nuclei BeRadialOff opens the radial loop
30 (DispDisplay) Displays test patterns on the local display until the NEXT key on the local keyboard is pressed. Test patterns can be walked through by pressing PLAY (next pattern) and PAUSE (previous pattern). Note: For the specification of the test patterns see page 2-10.
41b (BeSledgeOut) Diagnostic Nuclei BeSledgeOut moves the sledge outwards.
41a (BeSledgeIn) Diagnostic Nuclei BeSledgeIn moves the sledge inwards.
31 (LogReadErr) Read error log from NVRAM and output the data as error numbers only.
42a (BeGroovesIn) Diagnostic Nuclei BeGroovesIn lets the laser spot jump to the inside limit of the disc.
32 (LogReadBits) Read error bits from NVRAM and output the numbers of the error bits which are set.
42b (BeGroovesMid) Diagnostic Nuclei BeGroovesMid lets the laser spot jump to the middle of the disc.
Error Message Command not allowed in this state or unknown
Error Log Error bits 150101
8
parameter not valid for command
150102
7
sledge could not be moved to home position
150103
6
focus failure
150104
5
42c (BeGroovesOut) Diagnostic Nuclei BeGroovesOut lets the laser spot jump to the outside limit of the disc. 43a (BeTrayIn) Diagnostic Nucleus BeTrayIn closes the disc tray. 43b (BeTrayOut) Diagnostic Nucleus BeTrayOut opens the disc tray.
motor not on speed within time-out
150105
4
servo didn’t get on track after several retries
150106
3
PLL could not lock in Accessing or Tracking state
150107
2
44 (BeReset) Reset the Drive Mechanism.
subcode or sector information could not be read
150108
1
46 (MiscApplVer) Read the version of the application software from the NVRAM.
requested subcode item could not be found
150109
16
tray could not be closed or opened completely
15010A
15
TOC read could not be read in time
15010B
14
Set when a seek couldn’t be performed
15010C
13
datapath tries to access a non existing lead in area
15010D
12
A non existing burts cutting area is requested
15010E
11
S2b communikation error
1501F0
10
S2b communikation error
1501F1
9
S2b communikation error
1501F3
24
S2b communikation error
1501F4
23
S2b communikation error
1501F5
22
90000
32
communikation error with the STi 5505
90001
31
communikation error with the display processor
190000
40
communikation error with the STi 5505
ķ 2 - 16
47a (MiscBeTrayOpen) Read the total number of times tray open from a fixed location in the NVRAM. 47b (MiscBePower) Read the total time of power on from a fixed location in the NVRAM. 47c (MiscBePlayTimeCDDA) Read the total playtime in CDDA mode from a fixed location in the NVRAM. 47d (MiscBePlayTimeDVD) Read the total playtime in DVD mode from a fixed location in the NVRAM. 55a (VideoScartSwDvd) Activated the signal path from DVD to TV. 55b (VideoScartSwPass) Activated the signal path from AUX to TV.
GRUNDIG Service
Fehlersuchdiagramme
GB
Fehlersuchdiagramm – Netzteil
Connect the mains inlet to a mains isolated variac
OK
Netzteil in Ordnung
nicht OK
OK
OK
OK
nicht OK
• Netzteil in Ordnung • Prüfen: – DVD-Monoboard – Bedieneinheit – A/V-MUX-Platte • Schaltungsteile der fehlerhaften Spannungen prüfen: 7233, 7259, 7236, 7237, 7221 • Standby-Schaltung prüfen
Check DC voltages +12V, +5V Stand by, -5V, +5V, +3V3, +2V9
OK
not OK Check the voltages +3V3 and 12V
OK
nicht OK
OK
NEIN
Betriebsspannung Vcc = 12V…16V an IC7110-(1) messen OK Netzteil in Ordnung
nicht OK
• Belastung der Ausgänge prüfen • Überspannungsschutzschaltung prüfen: 3135, 6114, 2114, 3115, 3116 • Oszillatorspannung an IC7110-(10) prüfen: 2102, 3110 IC7110 • Ansteuerschaltung des MOSFET 7125 prüfen: 3112, 3113, 2113, 3125 • Regelkreis prüfen: • Spannung an IC7110-(6) mit Oszilloskop messen • Bei >2,5V Regelkreis prüfen: 7200, 7201, 6210, 6240, 3201, 3202, 3204, 3205, 3206, 2201, 2202, 3104, 3105, 3106, 3109, 2104, 2106, 2109 • Anlaufschaltung und Spannungsversorgung prüfen: 3123, 3134, 2129, 6129, 3129, 3111, 2111 • IC7110 prüfen
• Check path of fault voltage: 7233, 7259, 7236, 7237, 7221 • Check standby circuit • +12V: check 6240, 2240, 5240 OK • +3V3: check 6210, 2210, 5210
Turn input voltage up from 0V and check not OK the voltage across C2121 this voltage should be 1.41 x AC (ca. 324V) OK Is power supply ticking?
YES
NO
Check Vcc of IC7110-(1) Vcc = 12V...16V OK
3-1
Power Supply OK
not OK
• Check the functionality of the following components: 1120, 3122, 5120, 6120, 2121 • Check the load on the secondary outputs • Check overvoltage protection: 3135, 6114, 2114, 3115, 3116 • Check oscillator voltage on IC7110-(10): check 2102, 3110, 7110 • Check drive circuit of MOSFET 7125: 3112, 3113, 2113, 3125 • Check working of regulation circuit: • measure voltage on IC7110-(6) with oscilloscope • if >2.5V check the regulation circuit: 7200, 7201, 6210, 6240, 3201, 3202, 3204, 3205, 2201, 2202, 3104, 3105, 3106, 3109, 2104, 2106, 2109
• Check start circuit and Vcc supply: 3132, 3134, 2129, 6129, 3129, 3111, 2111 • Check IC7110
Fehlersuchdiagramme / Trouble Shooting Diagram
"Pumpt" das Netzteil?
JA
• folgende Bauteile überprüfen: 1120, 3122, 5120, 6120, 2121
• Power Supply OK • Check: – DVD-Monoboard – Keyboard Control – A/V MUX Board
not OK
• +12V: Überprüfen von 6240, 2240, 5240 • +3V3: Überprüfen von 6210, 2210, 5210 Trenntrafospannung beginnend ab 0V erhöhen und Spannung am C2121 messen Uc=1,41 x AC (Uc ca. 324V)
Power Supply OK
Unplug the connections 0205 and 0207 Connect a dummy load resistors: 10Ω/10W between 3V3 and GND 15Ω/10W between +12V and GND
nicht OK +3V3 und +12V Ausgangsspannung prüfen
Check DC voltages +12V, +5V Stand by, -5V, +5V, +3V3, +2V9 not OK
Steckverbindungen 0205 und 0207 lösen Lastwiderstände anschließen: 10Ω/10W zwischen +3V3 und GND 15Ω/10W zwischen +12V und GND
Ausgangsspannungen prüfen +12V, +5V Stand by, -5V, +5V, +3V3, +2V9
Trouble Shooting Diagrams
Trouble Shooting Diagram – Power Supply
Gerät über einen Regeltrenntrafo am Netz anschließen
Ausgangsspannungen prüfen +12V, +5V Stand by, -5V, +5V, +3V3, +2V9
GDV 200
GRUNDIG Service
D
KEINE FUNKTION
Display?
NEIN
JA
Tastaturfunktion?
NEIN
Trouble Shooting Diagram – Keyboard Control NO OPERATING
• Versorgungsspannungen - Die Bedieneinheit wird von 24V-Spannungsstabilisator VREG2 in Verbindung mit 10V-Zenerdiode Z2 versorgt. - Eingangsspannung am Stecker J1-(4): -40V ±2,00V - Spannung an der Anode der Z2 -10V ±1,00V - Ausgangsspannung VKK an der Anode der Z1 -34V ±2,30V - Eingangsspannung am Steckerkontakt J1-(3): 5V ±0,25V - R4 - Eingangsspannung am Steckerkontakt J1-(1): 12V ±1,20V • Heizspannung - Frequenz an IC1-(19): 42kHz ±4,2kHz - Heizspannung der Anzeige zwischen Pin 1/2 und Pin 48/49: 4,5Veff ±0,6V - Gleichspannung an der Kathode der Z1: -28,5V ±2,8V • Oszillatorfrequenz 8MHz an IC1-(8) • Reset-Impuls an Q2-(C). siehe Bedieneinheit - Testanleitung • Ansteuerpegel für die Gitter (G1...G14): siehe Bedieneinheit - Testanleitung • Ansteuerpegel für die Segmente (P1...P10) : siehe Bedieneinheit - Testanleitung • Servicetestprogramm; PC-Systemtest; Service-Testebene 30 (DispDisplay)
Display?
YES
• Tastaturabfrage an Pin 36 und 37: siehe Bedieneinheit - Testanleitung • Tastaturabfrage an Pin 26...33: siehe Bedieneinheit - Testanleitung • Servicetestprogramm; PC-Systemtest; Service-Testebene 27 (DispKeyb)
Key Function?
NEIN
• +5V an Steckerkontakt J4-(1). • +5V an Q3-(B) wenn Gerät ein (LED aus). • +3,3V an Steckerkontakt J4-(1). • Servicetestprogramm; PC-Systemtest; Service-Testebene 29 (DispLed)
Standby LED off?
• Keyboard signals at Pin 36 and 37: see Keyboard Control - Test Instruction • Keyboard signals at Pin 26...33: see Keyboard Control - Test Instruction • Service Test Programme; PC System Test; Service Test Level 27 (DispKeyb)
NO
• Check +5V at plug contact J4-(1). • Check +5V at base of Q3-(B) when power on (no light). • Check +3.3V at plug contact J4-(1) during standby (light). • Service Test Programme; PC System Test; Service Test Level 29 (DispLed)
YES
JA
Fernbedienung?
NO
YES
JA
Standby LED aus?
NO
• Check supply voltages - The Keyboard Control Unit uses a 24V stabiliser VREG2 in combination with a 10V zenerdiode Z2. - Check input voltage at plug contact J1-(4): -40V ±2.00V - Check voltage at anode of Diode Z2 -10V ±1.00V - Check output voltage VKK at anode of Diode Z1: -34V ±2.30V - Check input voltage at plug contact J1-(3): 5V ±0.25V - R4 - Check input voltage at plug contact J1-(1): 12V ±1.20V • Check filament voltage - Check frequency at IC1-(19): 42kHz ±4.2kHz - Check filament voltage between pin 1/2 and pin 48/49: 4.5Vrms ±0.6V - Check DC voltage at kathode of Z1: -28.5V ±2.8V • Check oscillator frequency of 8MHz at pin 8 of IC1 • Check reset impuls at collector of Q2: see Keyboard Control - Test Instruction • Check timing and level for all grid lines (G1...G14): see Keyboard Control - Test Instruction • Check timing and level of segment lines (P1...P10): see Keyboard Control - Test Instruction • Service Test Programme; PC System Test; Service Test Level 30 (DispDisplay)
Fehlersuchdiagramme / Trouble Shooting Diagram
3-2
Fehlersuchdiagramm – Bedieneinheit
NEIN
• H-Impulse an IC1-(22) vorhanden, wenn eine Taste auf der Fernbedienung gedrückt wird. • IR-Empfänger IR1 und R13 prüfen. • Servicetestprogramm; PC-Systemtest; Service-Testebene 28 (DispRc)
Remote Control?
NO
• High pulses at pin 22 of IC1 while pressing a key on remote control. • Check IR receiver IR1 and R13. • Service Test Programme; PC System Test; Service Test Level 28 (DispRc)
YES
JA
Keyboard Control OK
Bedieneinheit OK
Bedieneinheit – Testanleitung / Keyboard Control Unit – Test Instruction Reset am IC1-(10) prüfen. Check reset timing at IC1-(10).
Segmentsteuerspannungen (P1...P10) prüfen. Check timing and level for all segment lines (P1..P10).
Gittersteuerspannungen (G1-G14) prüfen. Check timing and level for all grid lines (G1-G14).
Pull-Up-Widerstände 10kΩ an IC1-(36/37) anschließen. Scanning-Takte an IC1-(26-33/36/37) prüfen. Connect 10kΩ pull-up-resistors to IC1-(36/37). Check matrix scanning from IC1-(26-33/36/37).
5V
+5Vstby (C13)
4V (G1-G11) 4,5V (G12-G14)
400-700ms
4,5V -33V
-33V Reset (IC1-(10))
DC, 2V/Div, 200ms/Div
DC, 10V/Div, 200µs/Div
DC, 10V/Div, 500µs/Div
DC, 2V/Div, 10ms/Div
GDV 200
GRUNDIG Service
power on
NO SOUND
Kein Ton
Sinus-Signal einschalten: Servicetestprogramm; PC-Systemtest; Service-Testebene 21a (AudioSineOn)
Netzteil?
nicht OK
• Versorgungsspannungen prüfen, +3,3V (IC7400), +8VAud (IC7304), -8Vstby (R3615), +12Vstby (T7333) • Verbindungsleitung zum DVD-Monoboard prüfen
OK
LRCLK, SCLK, PCM_OUT0…2, PCM_CLK?
nicht OK
• Oszillogramme an TP7…10, 12, 13 prüfen • Verbindungsleitung zum DVD-Monoboard prüfen • DVD-Monoboard prüfen
nicht OK
• Oszillogramme an TP14 (IC7401-(1/2, 4/5, 28/29, 31/32)) prüfen • VREFA, 1,65V an IC7401-(30) prüfen • IC7401 prüfen
nicht OK
• IC7403, IC7408 prüfen • T7404…T7407, T7409…T7411 prüfen • Spannung KILL an Steckerkontakt 1300-(12) prüfen 5V - Mute; -8V - Wiedergabe
nicht OK
not OK
• Check oscillograms at TP7…10, 12, 13 • Check flex connection to DVD-Monoboard • Check DVD-Monoboard
AF at TP14?
not OK
• Check oscillograms at TP14 (IC7401-(1/2, 4/5, 28/29, 31/32)) • Check VREFA, 1.65V at IC7401-(30) • Check IC7401
AF at CINCH Outputs TP15?
not OK
• Check IC7403, IC7408 • Check T7404…T7407, T7409…T7411 • Check voltage KILL at plug contact 1300-(12) 5V - mute; -8V - playback
AF Level?
not OK
• Check C2456, C2462, C2466, C2475, C2481, 2485 • Check IC7403, IC7408 • Check T7404…T7407, T7409…T7411 • Check R3453, R3464, R3475, R3482, R3493, R3502
• IC7401 prüfen • C2455, C2459, C2461, C2464, C2477, C2480, C2484, C2487 prüfen • IC7403, IC7408 prüfen
Distortion?
YES
• Check IC7401 • Check C2455, C2459, C2461, C2464, C2477, C2480, C2484, C2487 • Check IC7403, IC7408
not OK
• Check IC7403 • Check C2372, C2373 • Check IC7917
NO nicht OK
NF at EURO-AV sockets AUX / TV?
• IC7403 prüfen • C2372, C2373 prüfen • IC7917 prüfen
OK
Oszillogramme: siehe Seite 4-43
SOUND OK
Oscillograms: see page 4-43
3-3
Fehlersuchdiagramme / Trouble Shooting Diagram
JA
OK
Ton OK
LRCLK, SCLK, PCM_OUT0…2, PCM_CLK?
OK
NEIN
NF an EURO-AV-Buchsen AUX / TV?
• Check supply voltages +3,3V (IC7400), +8VAud (IC7304), -8Vstby (R3615), +12Vstby (T7333) • Check flex connection to DVD-Monoboard
OK
• C2456, C2462, C2466, C2475, C2481, 2485 prüfen • IC7403, IC7408 prüfen • T7404…T7407, T7409…T7411 prüfen • R3453, R3464, R3475, R3482, R3493, R3502 prüfen
OK
Tonstörung?
not OK
OK
OK
NF-Pegel?
Power Supply?
OK
OK
NF an CINCH-Ausgänge TP15?
Switch on the sinus signal: Service Test Programme; PC System Test; Service Test Level 21a (AudioSineOn)
OK
OK
NF an TP14?
Trouble Shooting Diagram – A/V-MUX Board (Audio)
GDV 200
GRUNDIG Service
Fehlersuchdiagramm – A/V-MUX-Platte (Audio)
No Sound at Ananlog outputs
Sinus-Signal einschalten: Servicetestprogramm; PC-Systemtest; Service-Testebene 21a (AudioSineOn)
Kopfhörerausgang?
nicht OK
• Oszillogramme an TP16 (Steckerkontakt 1410-(1 / 3)) prüfen • IC7403-C/D prüfen
nicht OK
• IC7413, IC7414 prüfen • T7415, 7416, 7419, 7420 prüfen
Audio output 1402?
not OK
• Check oscillograms at TP16 (plug contact 1410-(1 / 3)) • Check IC7403-C/D
not OK
• Check IC7413, IC7414 • Check T7415, 7416, 7419, 7420
not OK
• Check IC7305 • Check T7336, T7337
OK
OK
EURO-AV-Buchsen?
Headphone output?
OK
OK
Audio-Ausgang 1402?
Switch on the sinus signal: Service Test Programme; PC System Test; Service Test Level 21a (AudioSineOn)
nicht OK
• IC7305 prüfen • T7336, T7337 prüfen
EURO-AV sockets?
OK
OK
Analogausgänge OK
Analog outputs OK
Kein Ton an Digitalausgang
No Sound at Digital output
Sinus-Signal einschalten: Servicetestprogramm; PC-Systemtest; Service-Testebene 21a (AudioSineOn)
Switch on the sinus signal: Service Test Programme; PC System Test; Service Test Level 21a (AudioSineOn)
DIG_OUT TP11?
nicht OK
• Verbindungsleitung zum DVD-Monoboard prüfen • DVD-Monoboard prüfen
OK
Digital out coax TP18?
nicht OK
Digital out coax TP18?
• Trafo 5400 prüfen
not OK
• Check flex connection to DVD-Monoboard • Check DVD-Monoboard
not OK
• Check Trafo 5400
OK nicht OK
Digital out optical?
not OK
• 5V at 6400-(2) • Check 6400
OK
Oszillogramme: siehe Seite 4-43
Digital output OK
Oscillograms: see page 4-43
GDV 200
GRUNDIG Service
• 5V an 6400-(2) • 6400 prüfen
OK
Digitalausgang OK
DIG_OUT TP11? OK
OK
Digital out optisch?
Fehlersuchdiagramme / Trouble Shooting Diagram
3-4
Kein Ton an Analogausgängen
Kein Bild
NO PICTURE
Testbild einschalten: Servicetestprogramm; PC-Systemtest; Service-Testebene 23a (VideoColDencOn)
Netzteil?
nicht OK
• Versorgungsspannungen prüfen: +8Vstby, -8Vstby, +12Vstby, +6V, +5V • IC7304, R3615 prüfen • Verbindungsleitung zum DVD-Monoboard prüfen
OK
VIDEOStecker 1300/1301 TP1…6?
nicht OK
• Oszillogramme an TP1…6 prüfen • Verbindungsleitung zum DVD-Monoboard prüfen • DVD-Monoboard prüfen
nicht OK
• Oszillogramm an TP19 prüfen • VIDEO-Buffer T7300, T7301, T7310 prüfen
nicht OK
nicht OK
• Oszillogramme an TP1…3, 24…27 prüfen • IC7305 prüfen • 10V an IC7305-(25); 5V an IC7305-(17); 1,2V an EURO-AV-TV-(7) • VIDEO-Buffer prüfen: T7306…T7309, T7325
OK
not OK
• Check oscillograms at TP1…6 • Check flex connection to DVD-Monoboard • Check DVD-Monoboard
VIDEO Cinch Socket TP19?
not OK
• Check oscillogram at TP19 • Check VIDEO Buffer T7300, T7301, T7310
not OK
• Check oscillograms at TP20…23 • Check IC7305 • Check VIDEO Buffer T7302, T7303
Switch on the Test Mode: Service Test Programm; PC Systemtest; Service Test Level 55a (VideoScartSwDvd)
Pattern via EURO-AV at TV visible?
not OK
• Check oscillograms at TP1…3, 24…27 • Check IC7305 • 10V at IC7305-(25); 5V at IC7305-(17); 1,2V at EURO-AV-TV-(7) • Check VIDEO Buffer: T7306…T7309, T7325
OK
• 0V an IC7305-(25); 0V an IC7305-(17); -0,3V an EURO-AV-TV-(7) • IC7305 prüfen • VIDEO-Buffer prüfen: T7306…T7309
Switch on the loop trough mode: Service Test Programm; PC Systemtest; Service Test Level 55b (VideoScartSwPass)
Pattern from EURO-AV-AUX at TV visible
not OK
• 0V at IC7305-(25); 0V at IC7305-(17); -0,3V at EURO-AV-TV-(7) • Check IC7305 • Check VIDEO Buffer: T7306…T7309
OK
RGB-Testbetrieb aktivieren: Servicetestprogramm; PC-Systemtest; Service-Testebene 53a / 53b (VideoScartSwPass)
nicht OK
• Oszillogramme an TP22…27 prüfen • IC7316 prüfen
Switch on the RGB Test Mode: Service Test Programm; PC Systemtest; Service Test Level 53a / 53b (VideoScartSwPass)
RGB Pattern
OK
not OK
• Check oscillograms at TP22…27 • Check IC7316
OK
3-5
Oszillogramme: siehe Seite 4-43
Video Part OK
Oscillograms: see page 4-43
Fehlersuchdiagramme / Trouble Shooting Diagram
nicht OK
OK
Bild Teil OK
• Check supply voltages: +8Vstby, -8Vstby, +12Vstby, +6V, +5V • Check IC7304, R3615 • Check flex connection to DVD-Monoboard
OK
Durchschleifbetrieb aktivieren: Servicetestprogramm; PC-Systemtest; Service-Testebene 55b (VideoScartSwPass)
RGB-Bild?
VIDEOConnector 1300/1301 TP1…6?
VIDEO Y/C Socket TP20/21?
• Oszillogramme an TP20…23 prüfen • IC7305 prüfen. • VIDEO-Buffer T7302, T7303 prüfen
OK
Bild von EURO-AV-AUX am TV sichtbar
not OK
OK
Test-Signal freischalten: Servicetestprogramm; PC-Systemtest; Service-Testebene 55a (VideoScartSwDvd)
Testbild über EURO-AV am TV sichtbar?
Power Supply?
OK
OK
VIDEO Y/C-Buchse TP20/21?
Switch on the test pattern: Service Test Programm; PC Systemtest; Service Test Level 23a (VideoColDencOn)
OK
OK
VIDEO Cinch-Buchse TP19?
Trouble Shooting Diagram – A/V-MUX Board (Video)
GDV 200
GRUNDIG Service
Fehlersuchdiagramm – A/V-MUX-Platte (Video)
Fehlersuchdiagramme / Trouble Shooting Diagram
D
GDV 200
Fehlersuchanleitung – DVD-Monoboard
Allgemeines • Die Impedanz der Messgeräte muss >1MΩ sein. • Am Eingang I2S muss zur Überprüfung des DVD-Monoboard ein Laufwerk mit eingelegter DVD-Disc oder ein Laufwerk-Emulator angeschlossen sein. • Die Analogsignale Audio und Video müssen auf der A/V-MUXPlatte messbar sein. • Mit Hilfe des PC-Systemtests des Servicetestprogrammes (S. 2-1) ist eine Funktionsprüfung einzelner Komponenten des DVDMonoboards möglich. Bedienhinweis: Service-PC am Service Serial Interface anschließen und Bedienvariante (C)ommand aufrufen (S. 2-1 / 2-2). Durch den Aufruf der in den Tabellen angegebenen Nummern (Ref. #) sind wichtige Funktionsgruppen prüfbar. Die Meldungen auf dem PC-Monitor sind ab der S. 2-3 (3. Servicetestebenen) erläutert. • Testpunkte S. 4-41 1. Betriebspannungen Messpunkt
Messwert
Messpunkt
Messwert
1600-(1)
3,3V
1600-(7)
GND
1600-(2)
3,3V
1600-(8)
GND
1600-(3)
5V
1600-(9)
-8V
1600-(4)
5V
1600-(10)
0V
1600-(5)
6V
1600-(11)
12V
1600-(6)
GND
1600-(12)
GND
2. DVD-Decoder/Host-Prozessor IC7305 2.1 Überprüfung der Initialisierung Beim Einschalten des Netzteils sind folgende Resets zu prüfen:
3. Audiosignalweg Die A/V-MUX-Platte muss für folgende Tests am DVD-Monoboard angeschlossen sein. Ref. # 21a
∆T1 150ms
Ref. # 19a 19b
M 50.0ms
2.2 Überprüfung der Systemtakte Die Toleranz der einzelnen Systemtakte ist maximal 0,02%. Anmerkung
Testpunkt
Messwert
–
27M_CLK
F551
27MHz
–
PCM_CLK
F703
11,2896MHz
2.3 Softwaretests Mit den folgenden Funktionen werden wichtige Komponenten des IC7305 geprüft: Ref. #
Anmerkung
Testpunkt
Messwert
6
Check-Summe des FLASH
–
7a
Audiotaktfrequenz CD-DA
F703
11,2896MHz ±0,02%
7b
Audiotaktfrequenz DVD
F703
12,2880MHz ±0,02%
11
I2C NVRAM access
12
I2C -Interface-Test für Eject µC
–
13
S2B-Interface-Test für Laufwerk
–
15
NVRAM Write Read
–
3-6
Audio-Mute Ein Audio-Mute Aus
Testpunkt F619 F619
Messwert 5V -8V
4. Videosignalweg Damit ein Großteil des Videosignalwegs (DSM-LSI-DVP-Denc) überprüft werden kann, ist mit folgenden Befehlen ein Farbbalkentestbild generierbar: Ref. #
Anmerkung
Testpunkt
23a
Farbbalken DENC Ein
F636, F639 siehe Seite 4-43 F642, F645 F646, F653
23b
Farbbalken DENC Aus
Messwert
Die EURO-AV-Schaltspannung an Testpunkt F613 kann entsprechend der Betriebsart 0V, 6V oder 12V betragen. Mit den folgenden Funktionen ist diese Spannung prüfbar:
Ref. #
RESET TIMING
Ref. #
Anmerkung
Anmerkung LOW-Pegel für EURO-AV-TV-(8) MEDIUM-Pegel für EURO-AV-TV-(8) HIGH-Pegel für EURO-AV-TV-(8)
Testpunkt
Messwert
F613 F613 F613
0V…0,5V 6V ±10% 12V ±10%
Testpunkt
Messwert
5. Laufwerk
F505 ch2 Ch1 1V= / Ch2 2V=
Messwert
Mit den folgenden Befehlen ist die Überprüfung der Audio-Stummschaltung möglich:
25a 25b 25c
∆U1 = 2.4V
Testpunkt
Audio MMA/AC3 Sinus einschalten F628, F629 siehe Seite 4-43 Test beenden: F630, F631 DVD-Player vom Netz trennen
Der in der Servicetestebene 21a erzeugte Pegel des 1kHz-Tones muss an den Audio-Chinch-Buchsen 1,8Veff ±0,25V betragen.
Ref. #
F502 ch1
Anmerkung
Anmerkung
44
Laufwerk-Reset
–
–
Referenzspannung Vref
F91
–
I2S-Interface B_BCLK
F361
6MHz
–
I2S-Interface CL1
F390
12MHz
–
I2S-Interface B_WCLK
F362
HIGH
–
I2S-Interface Stopclk
F391
HIGH
–
I2S-Interface B_Sync
F358
HIGH
–
I2S-Interface B_V4
9201
HIGH
2,5V ±0,3V
5.1 Disk-Motor Vor dem Einschalten des Diskmotors sind folgende Messungen durchzuführen: Ref. #
Anmerkung
Testpunkt
Messwert
–
Stby-Steuerspannung
U310
–
Stby-Steuerspannung invers
F370
HIGH LOW
–
Motorsteuerspannung
F376
3V ±0,3V
–
GRUNDIG Service
GDV 200
Fehlersuchdiagramme / Trouble Shooting Diagram
Disk-Motor in Betrieb Ref. #
Anmerkung
GB Testpunkt
Messwert
39a
Disk-Motor einschalten
–
–
Stby-Steuerspannung
U310
LOW
–
Stby-Steuerspannung invers
F370
HIGH
–
Motorsteuerspannung
F376
2,5V ±0,5V
–
Motorspannungen A1…A3
F368, F367 siehe Seite 4-43 F365
–
FG-Impulse T1…T3
F281, F384 siehe Seite 4-43 F387
–
Spannung VH
–
Hall-Sensor-Spannungen H1…H3
39b
Disk-Motor ausschalten
F381
3,3V
F369, F374 siehe Seite 4-43 F379, F380 F383, F386
Test Instructions – DVD-Monoboard
General • Impedance of measuring-equipment should be > 1MΩ. • To check the DVD-Monoboard a Drive Mechanism with DVD-Disc or a B.E.-Emulator must be connected to the I2S input. • The analog signals Audio and Video must be measurable at the A/V-MUX-Board. • With the PC Systemtest of the Service Test Software (p. 2-13) single components of the Digital Board can be checked. Remark: Connect Service-PC to Service Serial Interface and call operating variant (C)ommand (p. 2-14). The most important functions can be checked by the numbers (Ref. #). The messages on the PC-Monitor are described at p. 2-15 (3. Service Test Levels). • Testpoints p. 4-41
–
1. Power Supply Voltages 5.2 Radial-Steuerung Ref. # 40a 40b
Anmerkung Radial-Steuerung einschalten Radial-Steuerung ausschalten
Testpoint Testpunkt F24, F32
Messwert 4,3V
5.3 Sledge-Steuerung Ref. #
Anmerkung
Testpunkt
Messwert
–
Ruhezustand
F104, F105
4,5V ±0,5V
41a
Pick-Up-Einheit nach außen fahren F104–F105 (symmetrisch)
10VSS
41b
Pick-Up-Einheit nach innen fahren
F85, F97 F84, F87 F90, F93
Value
1600-(7)
GND
1600-(2)
3.3V
1600-(8)
GND
1600-(3)
5V
1600-(9)
-8V
1600-(4)
5V
1600-(10)
0V
1600-(5)
6V
1600-(11)
12V
1600-(6)
GND
1600-(12)
GND
2. DVD Decoder/Host Processor IC7305 2.1 Check initialisation While switching on the supply check next reset timing:
2,7V ±0,3V 2V ±0,3V 2V ±0,3V ∆U1 = 2.4V
5.4 Schubladen-Steuerung
∆T1 150ms
Ref. #
Anmerkung
Testpunkt
Messwert
–
Ruhezustand
F12, F81
4,5V ±0,5V
Schublade öffnen Schublade schließen
38a 38b
Anmerkung Fokus ein Fokus aus
–
Anmerkung Diodenausgänge A, B, C, D
M 50.0ms
RESET TIMING
8VSS
2.2 Clock check The tolerance of all clocks is maximum 0,02%. Testpunkt F27, F30 F27, F30
Messwert siehe Seite 4-43 4,3V ±0,5V
Ref. #
Testpoint
Value
–
27M_CLK
Remark
F551
27MHz
–
PCM_CLK
F703
11.2896MHz
2.3 Softwaretests The following commands are testing the most important components of IC7305.
5.6 HF-Teil DVD-Disk wiedergeben. Ref. #
F505 ch2 Ch1 1V= / Ch2 2V=
F12–F81 (symmetrisch)
5.5 Fokus Ref. #
Value
3.3V
F502 ch1
43b 43a
Testpoint
1600-(1)
Testpunkt F45, F49 F50, F52
Ref. #
Remark
Testpoint
Checksum FLASH
7a
µClock A CLK in CD-DA mode
F703
11.2896MHz ±0.02%
2,5V ±0,2V siehe Seite 4-43
7b
µClock A CLK in DVD mode
F703
12.2880MHz ±0.02%
2,6V ±0,2V siehe Seite 4-43 2,5V ±0,2V
–
Diodenausgänge E, F
–
DVDALAS-Ausgänge RFO DC
F53
–
DVDALAS-Ausgänge O-A, O-B DVDALAS-Ausgänge O-C, O-D
F59, F62 F69, F72
25mV ±10mV 25mV ±10mV
11
I2C NVRAM access
–
12
I2C Eject PWB
–
DVDALAS-Ausgänge S1, S2
F75, F77
25mV ±10mV
13
S2B Echo
–
15
NVRAM Write Read
–
GRUNDIG Service
Value
6
–
–
F55, F54
Messwert
3-7
Fehlersuchdiagramme / Trouble Shooting Diagram
GDV 200
3. Audio Path For the next test, the A/V-MUX Board must be connected to the DVDMonoboard.
Disc Motor operating Ref. # 39a
Ref. # 21a
Remark Audio MMA/AC3 Sinus On Terminating the test: Disconnect the DVD player from the mains
Testpoint F628, F629 F630, F631
Remark Audio-Mute On Audio-Mute Off
Testpoint F619 F619
–
Stby control voltage
U310
LOW
–
Stby control voltage invers
F370
HIGH
–
Motor control voltage
–
Motor voltages A1…A3
F368, F367 F365
see page 4-43
–
FG pulse T1…T3
F281, F384 F387
see page 4-43
–
Voltage VH
–
Hall sensor voltage H1…H3
Value 5V -8V
39b
4. Video Path To check a large part of the video-path (DSM-LSI-DVP-Denc) a colorbar can be generated via next commands: Remark
23a
Colourbar DENC On
23b
Colourbar DENC Off
Testpoint F636, F639 F642, F645 F646, F653
Value see page 4-43
25a 25b 25c
Remark LOW Level at EURO-AV-TV-(8) MEDIUM Level at EURO-AV-TV-(8) HIGH Level at EURO-AV-TV-(8)
Testpoint F613 F613 F613
Value 0V…0,5V 6V ±10% 12V ±10%
Remark
Testpoint
Value
44
Reset for Drive Mechanism
–
Reference voltage Vref
F91
2.5V ±0.3V
–
I2S Interface B_BCLK
F361
6MHz
–
I2S Interface CL1
F390
12MHz
–
I2S Interface B_WCLK
F362
HIGH
–
I2S Interface Stopclk
F391
HIGH
–
I2S Interface B_Sync
F358
HIGH
–
I2S Interface B_V4
9201
HIGH
–
5.1 Disc Motor Before switching on the disk motor the following measurements must be carried out: Ref. #
Remark
Testpoint
Value
U310
HIGH
–
Stby control voltage
–
Stby control voltage invers
F370
LOW
–
Motor control voltage
F376
3V ±0.3V
3-8
3.3V see page 4-43
–
40a 40b
Remark
Testpoint
Value
Radial control on Radial control off
F24, F32
4.3V
Ref. #
Remark
Testpoint
–
Standstill
F104, F105
4.5V ±0.5V
41a
Pick up unit moves outwards
F104–F105 (balanced)
10VPP
41b
Pick up unit moves inwards
F85, F97 F84, F87 F90, F93
Value
2.7V ±0.3V 2V ±0.3V 2V ±0.3V
5.4 Tray Control
5. Drive Mechanism Ref. #
F381 F369, F374 F379, F380 F383, F386
2.5V ±0.5V
5.3 Sledge Control
The Euro-AV-switching voltage can be 0V, 6V, 12V. Check at testpoint F613 the output-voltage while using next commands: Ref. #
Disc motor off
F376
5.2 Radial Control Ref. #
Ref. #
Value
–
Value
With the following commands, the Audio mute can be checked.
19a 19b
Testpoint
see page 4-43
The level of the 1kHz-tone, which is generated by Service Test Level 21a, must be 1.8Vrms ±0.25V at the audio chinch sockets.
Ref. #
Remark Disc motor on
Ref. #
Remark
Testpoint
Value
–
Standstill
F12, F81
4.5V ±0.5V
F12–F81 (balanced)
8VPP
43b 43a
Disc tray open Disc tray close
5.5 Focus Ref. #
Remark
Testpoint
Value
38a 38b
Focus on Focus off
F27, F30 F27, F30
see page 4-43 4.3V ±0.5V
Remark
Testpoint
Value
Diodes outputs A, B, C, D
F45, F49 F50, F52
5.6 RF Part Play back the DVD disc. Ref. # –
F55, F54
2.6V ±0.2V see page 4-43 2.5V ±0.2V
–
Diodes outputs E, F
–
DVDALAS outputs RFO DC
F53
2.5V ±0.2V see page 4-43
–
DVDALAS outputs O-A, O-B DVDALAS outputs O-C, O-D
F59, F62 F69, F72
25mV ±10mV 25mV ±10mV
–
DVDALAS outputs S1, S2
F75, F77
25mV ±10mV
GRUNDIG Service
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
– 1B............................4-17 Reference Oscillograms...............4-43 – 2 .............................4-19 A/V-MUX Board ..........4-13 Keyboard Control ..4-21/23 – 1A............................4-15
Verdrahtungsplan / Wiring Diagram
8003
POWER SUPPLY
A/V BOARD
2
1300
1301 16
1350
1
1 2 3 4 5 6 7 8 9 10 11 12
1
8006
+3V3 +3V3 +5V +5Vstby +6Vstby GND GND GND -8Vstby STB_CONT +12Vstby GND
8007
1501
1602 SERVICE 1 7 1
5
12
1603 1604 16
22
1
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 8005
1600
1
– 4 .............................4-35 – 5 .............................4-37 – 6 .............................4-39 Power Supply ..........4-9/11
8002 HP_L GND HP_R +8Vaud GND GND -8Vstby
8005
1 22
8007
1 2 3 4 5 6 7
DVD-Monoboard ........4-25 – 1 .............................4-29 – 2 .............................4-31 – 3 .............................4-33
GND (HSYNC) GND (PCM_OUT2) GND (PCM_OUT1) NC SCL 12Vstby SDA +6V NC GND C_ENC GND Y_ENC
1 2 3 4
+12V GND +5Vstb -40V
8004 1 2 3 4 5
SCL GND SDA STB_CONT P50
8006 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
(P50) B G GND R CVBS GND 0/6/12V -8Vstby +5V +5V KILL GND PCM_OUT0 LRCLK SCLK GND PCM_CLK STANDBY (CENTER_ON) (STEREO_MUTE) DIG_OUT GND
PIN NAMES BETWEEN BRACKETS ( ) ONLY USED IN DVD950
MONO BOARD
CL 96532065_003.eps 120799
1
12 1 0205
4 0207
8004 8002
1
4 J1
DISPLAY BOARD 1
5 J2
GRUNDIG Service
1
5 J4
4-1
GRUNDIG Service
4-2
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
Blockschaltplan / Block Circuit Diagram
GDV 200
– 1B............................4-17 Reference Oscillograms...............4-43 – 2 .............................4-19 A/V-MUX Board ..........4-13 Keyboard Control ..4-21/23 – 1A............................4-15
MONO BOARD
7204, 7401
DVD-Monoboard ........4-25 – 1 .............................4-29 – 2 .............................4-31 – 3 .............................4-33
– 4 .............................4-35 – 5 .............................4-37 – 6 .............................4-39 Power Supply ..........4-9/11
AUDIO/VIDEO BACKEND
7401 I2C
7200
RAM
ROM
SCART
3
3
RGB/YC/CVBS
7316 TDA4780 Color + Cont setting
RGB
7305 STV6410 SCART SWITCHING
CVBS/Y/C
AUX
AUDIO L+R
AUDIO L+R
P50 (to SLAVE)
SCART TV
JBE (servo)
7503
+12V 8Vstab
I2S
Video IC's and audio buffers
RGB/YC/CVBS
CVBS 3V3stab
HOST S2B
Y/C
DAC
A/V signals
Sti5505
OPTICAL OUTPUT DIG_OUT
DIGITAL OUTPUT Stereo_mute (optional) Headphone out
7401 0dB
PCM
6
DAC
L+ R
+9dB
C+LFE
UDA1328T +9dB
Lr+Rr
I2C Center_on
P50
Lt+Rt
Kill
7104
St_by
SLAVE PROCESSOR
POWER SUPPLY HEADPHONE
1113
MICRO (only DVD955 KARAOKE)
RC KEYBOARD
MICRO control
4-3
GRUNDIG Service
4-4
CL96532126_001.eps 261099
GRUNDIG Service
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
Blockschaltplan / Block Circuit Diagram – DVD-Monoboard
– 1B............................4-17 Reference Oscillograms...............4-43 – 2 .............................4-19 A/V-MUX Board ..........4-13 Keyboard Control ..4-21/23 – 1A............................4-15
DVD-Monoboard ........4-25 – 1 .............................4-29 – 2 .............................4-31 – 3 .............................4-33
– 4 .............................4-35 – 5 .............................4-37 – 6 .............................4-39 Power Supply ..........4-9/11
DVD-MONOBOARD SERVO PART
LOADER VAL3000 CDM OPU CD-LASER
DIAGRAM 1 SIGNAL PROCESSOR LASER SUPPLY
DVDALAS2
DIAGRAM 3 DECODER
MEMORY
7310
7102
S-RAM 132K
TZA1023
CY7C199-15C Var Gain
MUX
Diode Amplifiers Processing
RFo
15
1
CONTROL
Header
8
ADDRESS
4
DATA
DVD
7311
Land
1101 DPD
DVD-LASER MUX
6 CD
FLEX 24P
Push Pull
Servo Signals
Land/Groove Swap Mute
Offset compensations
RF-IN
D1-D6
6 3 Beam Tracking FTC
2
4
+5 GND
DECODER HD61 SAA7335HL/E/M2
4 V & I references Dual Laser
MOTOR-IC
Supply
FOCUS
FTC comp.
BA6856FP
Laser#1
SILD TACHO-OUT
Serial
RADIAL
7304
SICL
I/Face
Laser#2
B_V4 B_SYNC B_FLAG B_DATA B_BCLK B_WCLK
I2S6
TO STi5505 ON DIAGRAM 5
BLOCKDIAGRAM DIGITAL PART
3 MOTO-IN 1
DISK MOTOR
1301
M
DRIVE HALL-FEEDBACK
FLEX 11P HALL
AD[0:7]
SLEDGE MOTOR 1102
6 MHz
FLEX 8P HALL
SERVO MACE2 SAA7399
PCS-PRE-AMPL 7104
TRAY MOTOR
uP (8051 CORE)
LM833D
DIAGRAM 2 SERVO FLASH ROM
7202
PSENN AD[0:7]
AD[0:7]
A[0:16]
AM29F002
PHI-INPUT
M
CONTROL BUS
7200 CONTROL LINES
ADC
DATA/ADDRESS BUS
M
2
PCS
4
END-SWITCH
REF
A[8:16]
2
ADRESS LATCH
7201
DRIVERS 7103 BA5938FM SLEDGE
AD[0:7]
A[0:7]
2
74HCT573D
RADIAL TXD_BE RXT_BE CFR SUR
SERVO OUTPUTS
4 FOCUS
5
TO STi5505 ON DIAGRAM 5
S2B
BLOCKDIAGRAM DIGITAL PART
4
TRAY-SWITCH 1100 TRAY1
4-WIRES
TRAY2 4 8.46 MHz 4229_136 9936
1
GRUNDIG Service
4-5
GRUNDIG Service
4-6
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
Blockschaltplan / Block Circuit Diagram – DVD-Monoboard
GDV 200
– 1B............................4-17 Reference Oscillograms...............4-43 – 2 .............................4-19 A/V-MUX Board ..........4-13 Keyboard Control ..4-21/23 – 1A............................4-15
DVD-Monoboard ........4-25 – 1 .............................4-29 – 2 .............................4-31 – 3 .............................4-33
– 4 .............................4-35 – 5 .............................4-37 – 6 .............................4-39 Power Supply ..........4-9/11
DVD-MONOBOARD DIGITAL PART DIAGRAM 5 uP & DECODER PART
TXD_SER RXD_SER RTS_SER CTS_SER
4
7600
DIAGRAM 6.6 VIDEO/AUDIO OUTPUT PART CONN. 1602 4 SERVICE
SERVICE
SERVICE SERIAL INTERFACE
CONN. 1603
PAL_NTSC
7503 2
S2B 4
TO /FROM MACE2 (DIAGRAM 2 )
TXD_BE RXD_BE CFR SUR
7604, 7607 SCART[0:1]
UART
PROGRAMMABLE I/O
OSD
UART
2
SCART 0/6/12V
MUTE
0_6_12V
7608,7609,7610 MUTE_AV
MUTE
I2S 6
B_V4 B_WCLK B_DATA B_BCLK B_FLAG B_SYNC
FRONT END INTERFACE
SCLK PCM_OUT0 PCM_CLK LRCLK SPDIF_OUT
AUDIO DECODER
AUDIO
FROM HD61 DECODER (DIAGRAM 3 )
DEEM[0:1]
DEMULTIPLEXER
VIDEO
5
3V3
5
TO/FROM A/V-MUX BOARD
5V
R_OUT G_OUT B_OUT C_OUT CVBS_OUT Y_OUT
VIDEO ENCODER
MPEG DECODER
BCLK DATA ACLK WCLK DIG_OUT
7611
PCM (3X) DIG. OUT
7612-7618
CVBS RGB S-VHS
6
VIDEO FILTER BUFFER
R/C G B/CVBS CVBS/Y
4
PAL_NTSC SUBPICTURE PCM__CLK
HOST ST20
7616
ACLK+5V -5V
CLOCK SYNTHESIZER
SEL_ACLK
MK2742
CONN. 1604
STi5505
2
I2C SDRAM CONTROLLER
MEMORY INTERFACE
I2C CONTROLLER
SDA SCLK
2
SDA SCLK
RESETN
Y-C
+3V3 +6Vstby +12Vstby -8Vstby PCMout1 PCMout2 HSYNC
TO A/V-MUX BOARD
2 OPTION
7504
CONN. 1600 +3V3
27 MHz
SDRAM INTERFACE
RAM/ROM INTERFACE
SYSTEM ADDRESS BUS
SYSTEM DATA BUS
+5V
POWER SUPPLY
+5Vstby -8Vstby
7505
+6Vstby
EEPROM
2
+12Vstby
ST24E32M6
STB_CONT CONN. 1501 P50 7401
16Mb FLASH AM29LV160BT
7404
7405
16Mb SDRAM MT48LC1M16A1TG -7S
16Mb SDRAM
STB_CONT 2
TO/FROM DISPLAY
MT48LC1M16A1TG-7S
DIAGRAM 4 MEMORY PART 4-7
SDA SCLK
4229_136 9936
GRUNDIG Service
4-8
GRUNDIG Service
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
Netzteil / Power Supply Ansicht von der Bestückungsseite / View of Component Side
7
3233 9262
0207
C
7236 9230
6132
2239
7237 5210
D
7201
9261
6113 3115
7110
2
3228
5239
3129
1
9214
2260 6230 6210
5230
2211
2132
6114
7125 6111 0000
3125
2110
1120
5259
3235
2133 7200
A
B
7259
2210
2129
2120 3134
T2.5A H 250V
7255
2259
2131
3101
D
9250 2250 2230
2125
3123 1125 3120
C
5240
9260
3122
0101
2127
5222
6260 2240
2231
3135
2251
2121
2261
6240
2241 6250
3127
+
3126
6110
6120
3128
5125
3132
3124
5120
11
0205
6220
A
B
10
9210
5131
2126
9
5233
3133
8
2233
6
7233
5
2222
4
7221
3
2220
2
2221
1
XH
3122 423 30336
0206
3
4
5
6
7
8
9
10
11
9
8
7
6
5
4
3
2
1
0000 C5 0101 B1 0205 C10 0206 D10 0207 A10 1120 D2 1125 C3 2110 D3 2120 C2 2121 C4 2121a C4 2125 B3 2126 A3 2127 B5 2129 D3 2131 C7 2132 C6 2133 D6 2210 C8 2211 C8 2220 A8 2221 A8 2222 A9 2230 B8 2231 B8 2233 B10 2239 D9 2240 A8 2241 A8 2250 B8 2251 B8 2259 B9 2260 A9 2261 A8 3101 D4 3115 D4 3120 C2 3120a C2 3122 C3 3123 B3 3124 B3 3125 D5 3126 B5 3127 B5 3128 B5 3129 D3 3132 A5 3133 A3 3134 D2 3135 B6
3228 3233 3235 5120 5125 5131 5210 5222 5230 5233 5239 5240 5259 6110 6111 6113 6114 6120 6132 6210 6220 6230 6240 6250 6260 7110 7125 7200 7201 7221 7233 7236 7237 7255 7259 9210 9214 9230 9250 9260 9261 9262
B11 B9 C10 A2 B5 B6 D10 A9 C10 B10 C10 A9 C10 B4 C5 D4 C6 B3 C6 C8 A7 B8 A8 B7 A8 D3 C5 D7 D8 A9 B10 C9 D9 B9 B9 A10 A11 C9 B9 B7 D7 B8
2101 C 3 2102 C 3 2103 D 3 2104 D 3 2106 D 3 2107 D 4 2109 C 4 2111 D 3 2113 C 5 2114 C 6 2201 D 7 2202 D 8 2225 A 11 2238 C 9 3102 D 3 3103 D 3 3104 D 3 3105 D 3 3106 D 3 3107 D 4 3108 D 4 3109 C 4 3110 D 3 3111 D 6 3112 D 4 3113 D 4 3116 D 4 3131 B 4 3136 B 4 3201 D 7 3202 D 8 3203 D 8 3204 D 8 3205 D 8 3206 D 7 3221 A 9 3222 A 9 3223 A 10 3224 A 10 3225 A 11 3226 A 11 3227 A 11 3236 C 9 3237 D 9 3238 C 9 3253 A 9 3254 A 9 3255 B 9 3256 B 10 3257 B 10 3258 C 10
3260 A 9 4121 D 4 4125 C 5 4128 C 5 4250 B 9 6129 D 2 6256 B 10 7223 A 9 7226 A 11 7228 A 11 7235 C 10 7256 B 10 F101 C 1 F102 B 1 F103 B 3 F104 A 2 F105 B 4 F106 B 4 F107 B 6 F108 A 3 F109 D 3 F110 D 4 F111 D 4 F201 B 10 F202 B 10 F203 C 11 F204 C 11 F205 C 10 F206 C 11 F207 B 11 F208 A 10 F209 A 9 F210 B 11 F211 C 10 F212 C 11 F213 C 11 F214 C 11 F215 C 10 F216 A 10 F217 A 10 F218 A 10 F219 A 10 F220 C 10 F221 C 11 F222 C 11 F223 B 11 F224 D 7 F225 D 8 F226 D 9 F227 D 9
Ansicht von der Lötseite / View of Solder Side
7226
3222
7223
A
3223
3221
2114
3136
GRUNDIG Service
2201
3113 3112
2202
3122 423 30336 11
3111
3201
10
9
8
C
2111
2104
3116
3202
3203
3206
D
3109 2107
3205 3204
3236 3237
2113
3238
3107 3108
4128
3104
3110
4121
7
6
5
4 4-9
6129
D
3105 3106 2106
2109
2238
7235
2101 3102 2103 3103 2102
3258
C
B
3131
6256
3256
B
4125
7256
3255 3257
3254
3260 3253
4250
2225
3227
3225
7228 3226
A
10
3224
11
3 GRUNDIG Service
2
1 4 - 10
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
GDV 200
Netzteil / Power Supply 0101 0101 0205 0205 0205 0205 0205
0205 0205 0205 0205 0205 0205 0205
B1 A1 E15 E15 D15 B15 D15
0206 0206 0207 0207 0207 0207 0207
H16 I16 I16 C15 D15 A15 I16
0207 0207 0207 0207 1120 1125 2101
J13 K13 A16 A16 B16 C16 D16
1
C16 F16 D16 F16 A2 A3 G2
2102 2103 2104 2106 2107 2109 2110
2
H2 H2 I2 K2 J3 J4 J4
2111 2113 2114 2120 2121 2125 2126
2127 2129 2131 2132 2133 2201 2202
G7 H7 I7 B3 B6 A4 B4
3
2210 2211 2220 2221 2222 2225 2230
C9 E5 A9 E8 E7 I10 I10
4
2231 2233 2238 2239 2240 2241 2250
E11 E10 F11 F10 F13 G13 E11
5
2251 2259 2260 2261 3101 3102 3103
D10 B14 E13 E14 B11 A10 C11
3104 3105 3106 3107 3108 3109 3110
C10 C14 D11 C10 G2 H2 H2
6
3111 3112 3113 3115 3116 3120 3122
I2 I2 K2 J3 J3 J4 G4
3123 3124 3125 3126 3127 3128 3129
F6 H7 H7 I7 I6 B2 A3
7
3131 3132 3133 3134 3135 3136 3201
C5 A4 C8 D8 D8 D9 E6
8
B6 B7 B1 D5 E9 C6 H10
3202 3203 3204 3205 3206 3221 3222
3223 3224 3225 3226 3227 3228 3233
I11 K12 I11 J11 J11 G12 F12
9
H12 G13 G13 G14 G14 G15 E12
3235 3236 3237 3238 3253 3254 3255
10
3256 3257 3258 3260 4250 5120 5125
E12 E14 E14 E13 C12 C11 C12
D13 C13 D14 D11 B13 B3 C8
11
5131 5210 5222 5230 5233 5239 5240
5259 6110 6111 6113 6114 6120 6129
A9 F15 F15 D15 B15 D15 A15
12
6132 6210 6220 6230 6240 6250 6256
C14 B6 C6 H7 I8 B5 E5
E8 E10 F10 D10 A10 C10 D13
13
6260 7110 7125 7200 7201 7221 7223
C10 G3 C8 H9 J10 F12 G12
14
7226 7228 7233 7235 7236 7237 7255
G13 G14 B14 E12 D13 E13 C12
7256 D12 7259 C14
15
16
17
2131
Vref iref
7
11
2
2233 2259
100uF/25V
F216 F217 9 +2V9
5
6
100uF/6V3
2239
3236 4K7 3237 4K7
3233 1K
3227 10K
2225
7 GND +2V9
GNDs 3226 10K 7228 BC847
G 3228 15K
6 F221
2202 100nF
1K8
3202
BYD33D
7
F
F218 F219
GNDs
3204 270R To be left out of DVD2B version @ -8V
8 GRUNDIG Service
9
10 4 - 12
11
7
I
8 12 GND 0205 DVD-Monoboard 4
F226 0206
0207 Keyboard Control
J
1
F227 0206
@ DVD2B version: GDV 200 * = RESERVED ITEM NUMBER
2
27nF
4
+3V3
5222 10uH
– 1B............................4-17 Reference Oscillograms...............4-43 – 2 .............................4-19 A/V-MUX Board ..........4-13 Keyboard Control ..4-21/23 – 1A............................4-15
3
1
3223 10K
3201 10R F224
2113
6114
4K7
5
Vref
3115 1K
3206
4 - 11
2106
3106 680R
1
F215
+3V3
F220
3203 100R
K
E F214
0R
SOFT START & DMAX
UVL01
6
2.2uF/50V
CURRENT SENSE INPUT
1.5nF 3109 330R
FOLDBACK INPUT
* 3108 18K 3107 180K 2109
2107
CQY80NG
3205
FOLDBACK 3105 15K
GNDs
7201 KA431LZ
Dmax & SOFT-START CONTROL
OVER OVER VOLTAGE VOLTAGE MANAGEMENT PROTECT
5 +5V F213
H 7200
2201
iref
E/A OUT
J
Vref Voc
3 +5V F212
GNDs
100nF
CURRENT SENSE
2110
2104
4.7nF
THERMAL SHUTDOWN
3224 10K
7223 BC847
F211
VSB OUT
VOLTAGE FEEDBACK
13
4
3113 33R
F225
ERROR AMP
14
GND
STANDBY (reduced frequency)
*
BUFFER
2.2nF
RP STANDBY
Q
Reset
100nF
12
=1
Vstby
3112 150R F110 3
2
BYV10-40
RF STANDBY
LATCH
F111 2114
15
OUT
VC Set
2.5V
I
VOSC
OSCILLATOR
+6V
D
6
+6V
7226 BC857
GNDs
+12V
VOSC PROT
6113
3K6 2103
3104 15K
SYNC INPUT
10 CT
680pF 22K
3103
GNDs
5 +6V Stand By
2
To be left out of DVD2B version @
O
UVL01
3116 180R
2102 3102
supply initialization block
GNDs
iref
9
H
reference block
DEMAGNETISATION MANAGEMENT
Vref enable
5239
3238 *
C
F210
F223 F222
8
82pF
1
16
DEMAGNETIZATION DETECT
5230 10uH
7237 KA431LZ
3221 1K3
2220
2101
2111
7110 MC44603P
*
7235 BC847
100nF
3101 82K
MP3
GNDs
7221 LM317L A
220uF/10V
18
3110 10K
3257 27K
220uF/16V
I
BYD33D
9 -5V (-8V Stand By)
8 -40V
F209
5210 6.8uH
6220
16
100uF/6V3
2240
2221 *
2238
B
F205 F206
100nF
13
F
G
2260
2250 2230
9
3235 15K
3225 10K
BYD33D
3 +5V Stand By F204
10 Stand By
7236 STP16NE06
2222
PBYR1060
+12V
GND
F207
3258 10K
6256
F208
1000uF/10V
6210
10 7
5259 10uH
BAS16
100uF/6V3
3135 6R8
3256 470R
7256 BC857
3222 1K
2133
100uF/25V
3111 22R
BZX84-C24
6132
3255 680R
+6V
2210
2127
47pF/1KV
3128 1R
3127 1R
PBYR1080 2211 *
F109 2129
4.7uF/50V 6129
3129 10K
10R 3260
O
79M05 G
BC337-40
6230
12
4 +5V Stand By F203
+12V
4 -40V
7259
I
7255
2231 *
3134 18K
3126 4R7
BYD33J
5233 10uH
To be left out of DVD2B version @
3253 27K
330pF/1KV 6260
17
2132*
E
1
-8V
2251 1nF/1KV 6250 BYD33D 2261
O
78M05 G
4250 To be included for DVD2B version @ 4250
11
14
3125 1K
D
7233
I
3254 1K
5
7125 STP3N60FI
MP4
11+12V
2
BYW29F-200
470uF/25V
15
5125 BEAD
MP2
A
6240
5131 ETD29
3u3/50V
F107
5240 1uH
4700uF/6V3
MP1
BYD33J
6110
3136 270K
C
1
F106
F108
Only for US versions
3123 18K
3133 10M
0101
6111
2
F102
3132 0.27R
6120
BYD33J
4
1
3131 270K
5120
F202
+12V
2241 * S1NB80
100uF/385V
1
385V
3120
B
3
2120 330nF
F104 2125
3122 2R7
1120 T2.5AH250V
0101
3124 220R
2126
2
F101
F201
2.2nF
2121# F105
1125F103
2N2/400V 2N2/400V
A
12
13
14
15
DVD-Monoboard ........4-25 – 1 .............................4-29 – 2 .............................4-31 – 3 .............................4-33
16
– 4 .............................4-35 – 5 .............................4-37 – 6 .............................4-39 Power Supply ..........4-9/11
K
17 GRUNDIG Service
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
A/V-MUX-Platte / Board Ansicht von der Bestückungsseite View of Component Side
Ansicht von der Lötseite View of Solder Side
GRUNDIG Service
4 - 13
GRUNDIG Service
4 - 14
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
GDV 200
A/V-MUX-Platte/Board – Video 2360 D10 2361 D11 2362 D11 2363 E15 2364 E15 2365 E15 2367 F12 2370 G3 2372 F13
2373 F14 2374 G3 2379 C5 2380 C6 2381 C7 2384 C3 2386 C9 2387 C3 2388 D9
1
2401 E9 2403 E9 2405 F6 2406 F7 2407 F8 2412 H4 2415 E1 2416 E11 2417 D15
2389 C3 2390 D4 2391 D3 2392 D9 2393 D4 2394 D9 2397 D4 2398 D3 2400 E4
2
3350 C7 3352 B5 3353 C5 3400 D3 3401 D3 3403 D3 3404 D3 3405 D3 3406 E3
2419 A3 3321 D10 3322 D10 3331 B8 3334 C8 3338 G13 3339 G13 3340 G14 3341 G 14
3
3612 H7 3613 H6 3614 H7 3615 A3 3616 B2 3617 B1 3618 B2 3619 B2 3620 E2
3414 E4 3415 E4 3418 F6 3419 F6 3420 F8 3424 F4 3433 H4 3610 H6 3611 H6
4
5
4304 F13 4305 F13 4307 A8 4308 A8 4309 A8 6302 B1 6303 B1 7304 H3 7305 C11
3621 F2 3622 F1 3623 F2 3624 F1 3625 G1 3626 A2 3627 E2 3628 F2 3999 H9
6
7999 H10 F105 A1 F106 C1 F109 C1 F110 C1 F112 G2 F113 A1 F116 C13 F117 C12
7316 C4 7322 F4 7329 H6 7330 H7 7331 A2 7332 B2 7333 F2 7334 F2 7335 G1
7
F118 C12 F119 C13 F120 H4 F121 H4 F122 C13 F123 C14 F124 C14 F125 C14 F128 D1
8
F129 C15 F130 D1 F131 C10 F132 C15 F135 E1 F136 C15 F138 D1 F139 D11 F141 D11
F142 D1 F143 D15 F144 G1 F146 C15 F150 E1 F151 E11 F153 E11 F154 C15 F156 C15
F158 E11 F159 E15 F160 E11 F161 E15 F162 E11 F168 F12 F169 F13 F170 F12 F172 F12
9
F173 F12 F176 F13 F177 F13 F180 F14 F181 F13 F182 G3 F185 A10 F188 A10 F191 A10
10
P50
3626
0|6V
-8Vstby
0V
10K 7335 BC847B
0.7V
7334 BC847B
25 26
F151
27
2403 470n
F153
28
SCL
29 F158
30
F276
3414 4K7
F244
3424 F249
HSYNC
22K
F237 27
9
TP24
3415 22K
2405 47p
F238
28
2406 47p
3419 100R
3418 100R
17
19 F243
F160
2407 330n
F263
31 2416 F162
32
7322 BC847B
CVBS
RIN-TV
YIN-AUX
VCCA
SLB-VCR
CIN-TV
RCIN-AUX
LIN-TV YCVBSIN-TV
GNDV1 GIN-AUX
VREF
BIN-AUX
YCVBSIN-VCR LIN-VCR
LIN_TV YCVBSIN_TV
F156
F154
F129 F132 F136 F146
63 62 61 60
58 57
D 100n
59
56 +8VSTBY
55 54 F261 BCTV
100n
53
2363
52 F159
51 50 F161 49
2364 100u
YCVBSIN
E
2365 22n
10
33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 +8VSTBY 2367 100n
4304
BO
RO
2373 4u7
2372 4u7 F181 Y_ENC FROM 1301-(16)
F
GO
4305
TP22
SCL
50
50
3338 10K
F180 3339 100R
3341 10K
3340 100R
TP23
TP4
STEREO_R
2370
6
STEREO_L
G
3
4
5
6
7 GRUNDIG Service
8
9 4 - 16
10
11
13
14
2 LOUT_TV
SCL 21
RIN_AUX 37
RIN_TV 56
RIN_VCR 47
RIN_STB 39
LIN_AUX 35
RIN_ENC 43
LIN_TV 53
LIN_VCR 49
LIN_STB 41
LIN_ENC 45
YIN_ENC 38
YIN_AUX 26
YCVBSIN_TV 52
CVBSIN_STB 34
YCVBSIN_VCR 50
YCVBSIN_ENC 36
CIN_TV 54
CIN_VCR 48
YCVBSIN_AUX 24
CIN_ENC 40
RCIN_AUX 28
RCIN_ENC 42
GIN_ENC 44
BIN_AUX 32
BIN_ENC 46
FBIN_AUX 18
GIN_AUX 30
12
-14dB
SDA 22
I2C BUS DECODER FBIN_ENC 19
2
0/6dB
STEREO/ MONO 0/6dB -14dB
TV SWITCH
AUX SWITCH
VCR SWITCH
-14dB
CINCH SWITCH
ELECTRONIC VOLTMETER
DC VOLTAGES MEASURED IN STOP MODE
1
64 ROUT_TV
8 AOUT_RF
60 ROUT_VCR
62 LOUT_VCR
LOUT_AUX
4 ROUT_AUX
6
59 LOUT_CINCH
58 ROUT_CINCH
31 SLB_AUX 0/6dB -14dB
6dB
6dB
Y/CVBS SWITCH
6dB
C SWITCH
6dB
Y/CVBS SWITCH
4V 0V
V
C SWITCH
PROCESS CHIPS
SLB_VCR
H
0/6dB
TRAP
SLOW BLANK, I/O MONITOR
27 SLB_VCR
7 YCVBSOUT_VCR
25 SLB_TV
5
COUT_VCR
15 YCVBSOUT_AUX
13 COUT_AUX
11 FILTER
9 VOUT_RF
7999 BC847B
6dB
0.7V
3999 7330 BC847B
Y/CVBS SWITCH
10K
DC_OFF
6dB
F267
6dB
7329 BC847B
0.7V 3613
0V
F265 F266 3612
6dB
+8Vstby
3614
2
2412
2354 220n
FB SWITCH
+8VAud
GND
H
10K
F121
4K7
3433
3 F120
4K7
OUT
3610
8V
IN
2K7
1
F268 3611
10.8V +12Vstby
STV6410
+5V
1
+6V
25
RCOUT_TV
F182
220n
C SWITCH
2374
61 BOUT_TV
TP5
63 GOUT_TV
C-ENC
6dB
F144
14
17 FBOUT_TV
1301 (b)
3 YCVBS/OUT_TV
10u 50
7304 LF80C
4 - 15
C
64
2417 F143
LOUT-TV
RCOUT-TV
ROUT-AUX
YCVBSOUT-TV
GNDA
SLB-TV
SLB-AUX
RIN_TV
ROUT_TV GOUT_TV BOUT_TV
F123 F124
F298 F125
F122 COUT-VCR
F116
F119 AOUT-RF
GNDV3
VOUT-RF
FILTER
VCCV3
YCVBSIN-AUX
SDA
F112
LOUT-AUX
F118
F117
ROUT-CINCH
100n
3420 82K
0.7V
CVBS
1300 (c)
24
VCC12
F172
1K5
0.16V
SLB_TV
+12Vstby
1K5
3623 F279
+6V_ON
3628
10K
3622
1K
11V
4K7
BUFFER CLAMP3 21
47p
23
2401
F231
OUTPUT
+12Vstby
ROUT-VCR LOUT-CINCH
F173
7333 BC327-25
SYNC INPUT
SDA
3620
20
2361
F233 220n GND
+8VSTBY
10.8V
BO
LEAKAGE AND CUT-OFF CONTROL
I2C
F275
3624 F280
1.6V 3625 F281
TP27
B2
14 SC
11.2 V
F278
4
23 BUFFER CLAMP2
B
F226 220n
10n
Y_ENC TO IC7305-(38) OPTIONAL
3621 F277
F
G2
ADJUST
TP6
10u
F135
R2
3
ADJUST
100R 2360 47p
2394 470n
SCL SDA
CIN-VCR
75R
F230
2
ADJUST
OUTPUT
22
RIN-VCR
2400
F228
BRIGHTNESS G
F141
100R 3322
ROUT-TV GOUT-TV
BIN-ENC
3406 10n
75R
F227
CONTRAST
2392
1
BOUT-TV
LIN-ENC
10n
SATURATION
F224
2
ADD
GIN-ENC
3405 75R 2398
13
B-Y
22
3
F177
10n 2397
6
GO
4
LOUT-VCR
F176
75R 3404
F142
F225
TP26 R
5
FBIN-ENC
F169
2393
R-Y
21
FBIN-AUX
F168
3403 10n
75R
7
20 F139
3321
SOURCE SWITCH
F242
SDA
10
F223
Y
FBOUT-TV
F170
10n
8
2362
75R 2391
F221
100n
2390
3401
F262
19
{RO,BO,GO}
3400
Y- MATRIX
8
F150 2415
2388 470n F215 220n
SCL
F138
18
6
RIN-ENC
25 BUFFER CLAMP1
F131
YCVBSOUT-VCR
LIMITING
2386
RCIN-ENC
LIMITING
F213
7
LIN-STB
OUTPUT
CIN-ENC
BLACK
PEAK DRIVE
COUT-AUX
TP25 24
PEAK BEAM
RIN-STB
12 B1
GAMMA
YIN-ENC
ADAPTIVE
17
8
BC_TV
4K7
3331 3334
7305 STV6410A 16 15 14 13 12 11 10 9
RIN-AUX
11 G1
2352 100n
YCVBSIN-ENC
16
VCCV2
15
GNDV2
26
F204
18
2351 100n
LIN-AUX
10 R1
HSYNC
F130
+8VSTBY
+8VSTBY
YCVBSOUT-AUX
5
RO
9
FROM DVD-MONOBOARD
F191
2
3627
G
BO
2381 100n
3350 10K
BCL
F217
2389
47u
FROM DVD-MONOBOARD
F128
16
DC_OFF
GO
4309
CVBSIN-STB
B
RGB1
TP1
1
2380 100n
2379 100n
3353 1K
7316 TDA4780 13
F214
2387
470n
15
E
F211
470n
2
D
2384
Y-CD/
G
3
1301 (a)
A
COUT_AUX
470n
F106
4308
1K
F272 3618
R
5
C
{RO,BO,GO}
F185 F188
+8VSTBY
+8VSTBY
CPDL
TP2
RO
3352 5K6
-0.7V
F203
F109
10K
y|HUE
TP3
– 4 .............................4-35 – 5 .............................4-37 – 6 .............................4-39 Power Supply ..........4-9/11
B
F202
F110
7332 BC857B
CPDST
1300 (b)
F273 3619
F200
BAS216 F274
BAS216
DVD-Monoboard ........4-25 – 1 .............................4-29 – 2 .............................4-31 – 3 .............................4-33
+8VSTBY
VCC
-1.2V
15
+8VSTBY
-0.16V
F201
10K
4K7
RGB2
6302
14
-8.6V
F196
6303
4R7
47u
7331 BC337-25
3616 F271 3617
0V
3615 F270
F269
2419
-9.5V
F301 DC_OFF
4307
9
B
13
F279 F2 F280 F2 F281 G1 F298 C14 F301 B1
-9.2V
8 F113
F270 A3 F271 B2 F272 B2 F273 B2 F274 B1 F275 E2 F276 E3 F277 F2 F278 F1
OPTIONAL
OPTIONAL
F260
12
4K3
FROM DVD-MONOBOARD
A
F260 A1 F261 E15 F262 E2 F263 E11 F265 H7 F266 H6 F267 H7 F268 H6 F269 A2
– 1B............................4-17 Reference Oscillograms...............4-43 – 2 .............................4-19 A/V-MUX Board ..........4-13 Keyboard Control ..4-21/23 – 1A............................4-15
F105
1
F230 E4 F231 E9 F233 E9 F237 E6 F238 E7 F242 E7 F243 E8 F244 F4 F249 F4
F215 D9 F217 C4 F221 D4 F223 D4 F224 D9 F225 D4 F226 D9 F227 D4 F228 D4
11
VIDEO CONTROL & SCART SWITCH 1300 (a)
F196 C5 F200 C5 F201 C5 F202 C6 F203 C6 F204 C7 F211 C4 F213 C9 F214 C4
VCCV1
1301-14 G1 1301-15 E1 1301-16 E1 1301-2 D1 1301-8 D1 1301-9 E1 2351 C12 2352 C13 2354 H3
RGB SWITC H
1300-1 A1 1300-2 C1 1300-3 C1 1300-5 C1 1300-6 G1 1300-8 A1 1300-9 A1 1301-10 D1 1301-13 D1
15 GRUNDIG Service
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
A/V-MUX-Platte/Board – EURO-AV- / Y/C-Buchsen/Socket
1
2
3
– 1B............................4-17 Reference Oscillograms...............4-43 – 2 .............................4-19 A/V-MUX Board ..........4-13 Keyboard Control ..4-21/23 – 1A............................4-15
4
5
6
7
8
9
10
11
12 2353
VIDEO OUT
F115
470R
F127
1304-1
FROM 1300-(12)
100R
BC857B 7300 3302 F102
7.4V
7301 BC847B
2359
F103
100R
-1V
7310 BC847B
1.8V
1.1V
3305 820R
3304 6K8 F107
2377 220p
F108
1 3434
F152
100R
1.3V
+6Vstby
-8Vstby
100R
D
F184
3439
+6Vstby
1V
7303 BC847B 1.8V F189 2418
2.5V
F264 3609
F187 3310
2308
75R
220p
0|6V
8K2 75R
2337 220p
100R
3
5
4
7
2
TP21
7308 BC847B
4V
14A
19A
1.7V
+8Vstby +8Vstby
3343 75R
75R
2375 220p
F197 3604 F297
0V
3605 F207 4K7
2K2
8V
F299
4K7
7327 BC847B
-7.6V
BC857B 7326 F198
3410 3603 100K
470R
0.8V
3606 560R F209
3422 F210 4K7
1.4V
3416 33R
3366 47K
2385
F212
3394
1304-2
F220
4K7
-7.7V
BOUT_TV
F219
F300 0.8V 7324 BC817-25
F222
6301 BAS216 F232
7B
47K
2.3 V
3360
F245 3378 1K
F246
0V
3357
F236
4K7
8V
1.7V BC857B 7312 F241
3362 470R
3365 560R F252
3398 4K7
3395 F253 4K7
3399 5K6
ELECTRONIC VOLTMETER
2396
-7.7V
220p 3408
F247
-7.7V
50
7315 BC817-25
3441 100R
-0.8V 3402
+6Vstby
3425 75R
16B
2408 220p
17B 18B
F256
7325 BC847B
1.7V
PB A/V MUX 3104 123 4225.5
4K7 -8Vstby
13B 14B
F254 F255
12B
15B
10u
1.7V
-0.8V
2404 220p
75R
F240
Vref
DC VOLTAGES MEASURED IN STOP MODE
2414 100p
2402
3407 75R
3355 33R
2.3V
H
11B
50
3364 56R
7314 BC817-25
10B
P50
10u
2399
-7.6V 7313 BC847B
9B
F234
7311 BC847B F235 3354 75R
3608 100K
F248
8V
8B
Vref
470R
-8Vstby
F229
3413
470R
3356 4K7 F239
G
6B
+8Vstby
-0.8V
2B 3B
5B
3409
+8Vstby
Vref
1B
4B
2395 220p
-0.8V
+8Vstby
I
F218
COUT_AUX
FBIN_AUX
V
F216
3397 47K
3423 56R 3427
AUX-SCART
470R
50
FBOUT_TV
F
1K
4u7
G
3359 47K
3363
50
-0.8V
-8Vstby
3349 47K
3351 470R
F205
4u7
7321 BC817-25
-7.7V
F195
50
3417 470R
Vref
H
3348
4u7 2383
MT1MT2
1K
50
2382
7320 BC847B F199 3411 75R
3607 5K6
3421 270R
F193
4u7
7328 BC847B
0.7V
2378
50
F194 3602
E
F183
10u
F208
3601 4K7
F
+8Vstby
1304-3 0350808190
2376
3600 4K7
21A
2371 220p
7309 BC847B F178 3336 3342 470R
+8Vstby
D
20A
6
+8Vstby
17A 18A
1V
B/C SWITCHING
16A 2369 220p
F171
100R
E
15A
150R+6Vstby
F175
C
13A
F165
3335 470R
3438
12A
2413 100p
75R2368 220p
3332 470R
150R 3333
3.3V
F157
7307 BC847B F164 3330
1.3V
F166 3436
3437 F167
TCS79
F190
F192
3312 220R
Y/C OUT
1
3306 470R
3303
330n
1303
10A 11A
2366 220p
0.7V TP20
8A 9A
P50
F163 +6Vstby
F149
390R
75R +6Vstby
3435 100R
7302 BC847B
1.7V
100R
3440 F186
F148 3313
BAT254 4301
7306 BC847B F155 3327
B
6A 7A
6305
SLB_TV
3329 470R
{C_OUT,Y_OUT} Y_OUT
F145
0.7V
3309 150R
2314 100u
4A
OPTION
5.6V 6300 BZX284-C5V6
3A
5A
+6Vstby
3308 680R
3307 4K7 F111
2A
F140
3325 47K
1402-A YKC21-3930 2
75R
1A
F137
7337 BC817-25
3323
50
CVBS-OUT
TP19
3345
F104 3347 470R
2K7
470R
F133
4u7
F134
F174
F100 3301 F101
A
3320 47K
3368
KILL
+6Vstby
Keyboard Control
TV-SCART
50
3300 150R
EH-B
2
BC817-25
1K
4u7
C_OUT
3367
1
2358 220p
3319
+8Vstby +8Vstby
3316 47K
FROM 2K7 7336 1300-(12)
3318 47K
2357
C
1K
50 KILL
A
B
F114 3314
4u7
3315
50
-0.3V
14 1350
2355 4u7
CVBS
13
DVD-Monoboard ........4-25 – 1 .............................4-29 – 2 .............................4-31 – 3 .............................4-33
3429
1V
75R 3431 F257 470R 2411
Vref
19B
F258
I
20B 2410 220p F259
2409 220p
21B
3432 75R
10u 50
1
GRUNDIG Service
2
3
4
5
6
7
8
4 - 17
9
GRUNDIG Service
10
11
12
13
– 4 .............................4-35 – 5 .............................4-37 – 6 .............................4-39 Power Supply ..........4-9/11
1303 D6 1304-1 A13 1304-2 F13 1304-3 E13 1350 A13 1402-A B6 2308 D6 2314 C3 2337 D5 2353 A12 2355 A11 2357 A10 2358 A13 2359 B10 2366 C12 2368 C12 2369 C13 2371 D13 2375 E12 2376 E11 2377 B5 2378 E12 2382 F11 2383 F11 2385 F10 2395 G12 2396 H10 2399 H11 2402 H12 2404 H13 2408 I13 2409 I13 2410 I12 2411 I12 2413 C13 2414 H12 2418 D4 3300 A3 3301 B3 3302 B4 3303 D5 3304 B3 3305 B4 3306 D5 3307 C3 3308 C4 3309 C4 3310 D5 3312 D4 3313 B13 3314 A12 3315 A11 3316 A13 3318 A11 3319 A11 3320 A12 3323 B11 3325 B12 3327 C11 3329 C11 3330 C12 3332 C12 3333 D11 3335 D11 3336 E12 3342 E12 3343 D13 3345 B5 3347 B5 3348 E12 3349 F13 3351 F12 3354 H7 3355 H8 3356 H4 3357 H4 3359 F13 3360 H6 3362 H7 3363 F12 3364 I8 3365 I5 3366 F12 3367 A12 3368 A12 3378 I3 3394 F11 3395 I5 3397 G12 3398 I3 3399 I5 3402 I7 3407 H11 3408 H12 3409 G12 3410 F6 3411 F7 3413 H12 3416 F8 3417 F7 3421 H2 3422 F5 3423 G8 3425 I12 3427 G7 3429 I12 3431 I11 3432 I13 3434 B10 3435 C10 3436 D11 3437 D10 3438 D10 3439 C4 3440 D3 3441 I10 3600 E3
3601 F2 3602 F4 3603 F5 3604 F3 3605 F2 3606 F4 3607 F4 3608 H5 3609 D4 4301 C12 6300 C3 6301 H2 6305 B12 7300 B4 7301 B3 7302 C5 7303 D3 7306 B11 7307 C11 7308 D11 7309 D11 7310 B4 7311 H7 7312 H5 7313 I3 7314 I6 7315 I8 7320 F7 7321 F6 7324 G8 7325 I11 7326 F4 7327 F3 7328 F2 7336 A12 7337 B12 F100 B3 F101 B3 F102 B4 F103 B3 F104 B5 F107 B3 F108 B6 F111 C3 F114 A12 F115 A11 F127 A11 F133 B11 F134 A13 F137 A13 F140 B13 F145 B13 F148 B12 F149 B13 F152 B10 F155 C11 F157 C13 F163 C11 F164 C12 F165 C13 F166 D11 F167 D10 F171 D12 F174 D12 F175 D10 F178 E12 F183 E12 F184 C4 F186 D3 F187 D5 F189 D4 F190 D6 F192 D5 F193 E12 F194 F3 F195 F12 F197 F2 F198 F5 F199 F7 F205 F11 F207 F2 F208 F6 F209 F4 F210 F6 F212 F11 F216 G13 F218 G12 F219 G13 F220 G7 F222 G13 F229 H13 F232 H2 F234 H12 F235 H7 F236 H4 F239 H4 F240 H8 F241 H5 F245 I2 F246 I3 F247 I11 F248 I6 F252 I5 F253 I6 F254 I8 F255 I7 F256 I11 F257 I12 F258 I12 F259 I12 F264 D4 F297 F3 F299 F4 F300 G8
14
4 - 18
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
A/V-MUX-Platte/Board – Audio
– 1B............................4-17 Reference Oscillograms...............4-43 – 2 .............................4-19 A/V-MUX Board ..........4-13 Keyboard Control ..4-21/23 – 1A............................4-15
2
4
5
LD1117
TP14
F403
3455
3
MC33079 1 F404
F499
-8Vstby
10K F412
DI34
4
1300 (d)
L3MODE
17
TST2
22
DS
VO1N DACÕS
3448
10K 2461
TP14
5
VREFA
3
3473
2471
2472
100n
47u
5K6
1.65V
3V3A
3
F449
+5V
7408-A
4
F459 CENTER
F491
3509
7413-A
F467 F13
1301-11 I1
3509 G2
F468 F13
1301-12 I1
3510 C6
F469 G10
1301-3 H1
3511 C1
F470 G13
1301-4 H1
3512 C1
F471 G1
1301-5 H1
3513 F12
F472 G4
1301-6 I1
3514 G12
F473 G1
1301-7 I1
3515 H11
F474 H6
1400-A A11
3516 H2
F475 H6
1400-B D9
3517 B7
F476 H8
1400-C G9
3518 B3
F477 H5
1402-B D13
3519 B3
F478 G1
1402-C D13
3520 I2
F479 H7
1405 I13
3521 I3
F480 G12
1410 A13
3522 I2
F481 G12
2450 B6
3523 H3
F482 H11
2452 A2
3524 H13
F483 H11
2453 A3
3525 F1
F485 I2
2455 B4
3527 G2
F486 I8
2456 B7
4400 F10
F487 I8
2457 C10
4401 E10
F488 I10
2458 C6
5400 I9
F489 I10
2459 A4
6400 H13
F490 I10
2460 B2
7400 A2
F491 G2
2461 C6
7401 B2
F497 H1
2462 A7
7402 A3
F498 G12
2463 A10
7403-A A6
F499 A3
1402-B
2464 A6
7403-B B6
F500 H3
YKC21-3930
2465 D6
7403-C A11
F501 I2
2466 D7
7403-D C11
F502 I3
2467 D8
7404 C7
F503 I2
2468 E6
7405 C8
F600 I9
2469 E2
7406 A9
F601 E1
2470 D11
7407 A7
2471 E2
7408-A E5
2472 E3
7408-B D6
2473 D10
7408-C G5
2474 D11
7408-D F5
3
4
RIGHT FRONT
LEFT FRONT
7
3486 100K
F463
13 Y1 47u
F435
22n
KILL
F436
3466
TP15
6
2477
F441
2467
4
F438
3469 7409
1n
10K
47u
7
6
-8Vstby
22n
OPTIONAL
4401
3
KILL
3484
F457
2K7
LM833D
HP_L
7410
3483
2478
BC817-25
10K
1n
F461
1 Y1
7
F464
2482
3490 10K
HP_R
BC817-25
5
4400
8
F465
7
TP15
F476
-8Vstby
-8Vstby
3497
F479
7412
5K6
3494
KILL
F470
3500
LEFT REAR
STEREO_MUTE
F483
2K7
2K7
+5V 3501
100u
100p
3520
DIG_OUT
BC857B
BC847B
7418
10K
F501
12 +6V_ON
3522 1K
2
F503
0.7V
ELECTRONIC
DC VOLTAGES MEASURED IN STOP MODE
VOLTMETER
0V
47p
100R
V
F502
11
F487
3507
1K
3521
5.5V
10u
2495
F600
3
F488
3508
6 7
5
6
GRUNDIG Service
8
9
4 - 20
7418 H12
2488 H13
7419 F13
2489 I12
7420 G13
2490 D7
7421 G3
F490
7423 I3
2494 I12
F400 A12
2495 I9
F401 A3
3442 B7
F403 A5
3444 C4
F404 A6
3445 C10
F405 A7
10
100n
F413 C12 F414 B2 F415 B5
BC817-25
3457 A8
H
F418 B5
3460 C3
F419 B1
3461 A10
F420 B7
3462 A7
F421 B6
3463 A8
F422 B1
3464 A6
F423 C7
3466 D7
F424 C8 F425 C1 F428 C1
2488
3470 D7
F430 C1
3471 E6
F432 C1
100n 6400 GP1F32T
3472 E1
F433 C6
3473 E2
F434 D4
3475 E6
F435 D7
3476 E12
I
YKC21-3416
2
F436 D8
3477 E13
F437 D3
3478 E4
F438 D7
3479 F4
F439 E2
3480 F7
F440 D10
3481 F13
F441 E6
3482 F5
F442 E6
3483 F8
261099
12
F417 B9
3459 A4
3469 D8
CL96532126_011.eps
11
F416 B7
3458 C3
3468 D4
1
100n
F406 A8
3456 A7
2489
OPTION
8
3
7422 I3
2493 I8
7420
1405
TP18
2494
7
2487 H5
F412 B4
3
PB A/V MUX 3104 123 4225.5 4
2
F489
BC847B
3
KILL
68R
1
KILL: -8V DURING PLAY 5V DURING STOP, NEXT, PREVIOUS
7423
4
2
7417 H11
3455 A4
5400 7CHA
2486 H8
F411 A8
DRIVER
4K7
7415 E13 7416 G12
3454 A4
1
100R F485
-8Vstby
7414-B F11
2485 H6
3453 C6
+5V
F486
3505
7414-A E11
2484 G5
3452 B2
2K7 7417
OPTIONAL
7422
7413-C F9
2482 G8
F408 A5
F481
3504
BC557B
7413-B E9
2481 G6
F410 A7
G
10K
10K 2487 +6Vstby
7413-A D10
2480 F5
3451 C4
2K7
F500
5V
2479 E11
F409 A7
F480
1n
10K
7412 H7
3448 C4
3514
+5V
2486
3499
2478 F8
3447 C8
7416
6
3502
5.5V
STEREO_R
100R
F498
OPTIONAL
BC817-25
2K7
F468
3492
F469
3503 KILL
F467
3491 100R
100u
RIGHT REAR
7
7411 G7
3446 C7
220R
2485
F466
4
7408-C 3496
2483
6
Z 4
1400-C 8 YKC21-4040
9
3V
BC817-25
F
LM833D
-8Vstby
9
7419
7414-B
+5Va
Vss Vee E
8
F475
F454
3481
7410 F7
2477 E6
2483 F11
7415
+8VAud
ST_R
6
3 Y1
1n
10K 2484
OPTIONAL
F453
7409 D7
2476 E12
2491 I2
7411
+12VAUD
47u
E
BC817-25
BC817-25
2K7
2475 F6
STEREO_L
100R
KILL
F458
HEF4053BT Vdd S 9 5 Y0
3493
F477
100R
3513 2K7
7413-C 16
220R 3488
F447
3477
22n
-8Vstby
Z 15
8
TP15
4
F446
3476
2479
Vss Vee E
F462
3487
-8Vstby
10
F445
2476
2K7
-8Vstby 47u
F444
100u 4
7
KILL
3498
3516
8
HEF4053BT Vdd S 10 2 Y0
F452
D
7414-A
F442
TP15
R
TP16
2
10K 2480
100p
5
220R
11
3523
YKC21-3930
STEREO_R
BC817-25
3480
1402-C
6
CENTER
F451
L
TP16 +8VAud
1
2481
3495
4
2470 CENTER
7413-B 16
MC33079 F474 8
+6V
C
Z 14
8
220R
3470 2K7
2475
13
5K6
4
TP16
3
100p
BC817-25
TP12
HP_L
47u
+5Va
11
3489
4
2474
Vss Vee E
SUBW
7408-D
4
7421
0.6V
B
7403-D
STEREO_L
ST_L
F450
MC33079 F460 14
47K
3527
3508 I10
16
2473 HEF4053BT Vdd S 11 22n 12 Y0
100p 12
TP14
2491
FROM DVD-MONOBOARD
F466 F12
1301-1 H1
11
3515
10K
3506
100K
4 - 19
3507 I8
5
2468
-8Vstby
TP14
10K
F472
1
F465 F11
1300-7 E1
EH-B
1
+5Va
MC33079
2
1
I
3506 F3
1410
-8Vstby
47u
3482
TP11
6
F464 G7
1300-4 D1
13
2.8VRMS
+12VAUD
4R7
3505 I8
+8VAud
3475
11
5K6
1301 (c)
7
BC817-25
2K7
-8Vstby
TP14
+5V
12
1n
+5V
2466 11
100K
F497
F463 G4
1300-22 G1
2457
2490
6
100K
30 F437
DIG_OUT
TP13
3504 H12
HP_R
7405
7408-B
4
5
22
5
BC817-25
F424
YKC21-4040
3471
F439
VSSA
6
47K
21
F462 F7
1300-21 G1
F440
MC33079 7
0V
F478
3447
KILL
7404
+12VAUD
3V3
STEREO_MUTE
3503 H10
F433
+12VAUD
F473
3
F423
1400-B
F434
TP10
20
F461 F6
1300-20 G1
A
3451
2465 22n
TP9
19
3502 H5
MC33079 F413 14
F443
CENTER_ON
F460 F5
1300-19 G1
HP_R
100R
+12VStby
3453
3479
F471
H
100R
2K7
100p
2
VO6
18
G
3446
-8Vstby
10K
TP7
17
3501 G11
TP15
F417
3442
10K
2458
10K
TP14
F416
10K
16
1300-18 F1
+8VAud
KILL
TP14
3517
2456
3445
3460
31
VO4
VO5
2469
3525
FROM DVD-MONOBOARD
F
F459 F4
MC33079 F400 8
-8Vstby
22n
3478
15
3500 G11
1
100u
10K
F448
TP8
1300-17 F1
11
F420
1
14
1n
11
12
13
F458 F10
7403-C
6
32
VO2N
VO3
KILL
F457 F7
3499 H8
3
6
3458
F601 F455
2K7
2493
3472
F456 E10
3498 H5
1300-16 F1
7403-B
4
26
VO2P
7
10
3497 H7
1300-15 F1
2
3468
+5V
1300-14 F1
BC817-25
INTERPOL FILTER
VDDA
4R7
F455 E1
1400-A
MC33079 F421 7 F418
18 19
5
3444
25
L3DATA
F415
100p
3V3A
24
L3CLK
VO1P
22n
3496 H7
2
NOISE SHAPER
4
1300-13 E1
TP16
F482
1
F454 F13
F456
D
10K
7406
2450
23
DEEM0
VOL/MUTE/DEEMPH NC
9
DEEM1
7
15
11
STATIC MUTE
DI56
SYSCLK
29
F453 E12
3495 H4
10K
DI12
16
28
3494 G13
9
4R7
DIGITAL
WS
TST1
8
3493 G5
-8Vstby
3510
BCK
27
10K
3511
F432
VSSD
CONTROL
C
20
VDDD
14
BC817-25
2463
F452 F8
1300-10 E1 1300-12 E1
5
2455
INTERFACE
F430
7407
F411
3463
KILL
3461
– 4 .............................4-35 – 5 .............................4-37 – 6 .............................4-39 Power Supply ..........4-9/11
1300-11 E1
ST_L
UDA1328T 21
13
F410
2K7
22n
INTERFACE
10K
3512
F428
100R
F414
7401
12
4
100p +8VAud
22n
F425
13
YKC21-4040
5K6
11
10
10K 2464
3459
2K7
3518
TP14
F422
12
HP_L
F408
3519
TP15
F406
3457
3464
BC817-25
3452
F405
100R
3462
KILL
7402
3V3
10
11
+8VAud
11
3454
KILL
3456
100u
100p
10K
F419
2462
2
47u
3V3
B
10
ST_R
7403-A
4
10K 2459
2453
1
220n
2460
9
F409 3V3
F401
2
OUT
IN
2452
8V
8
AUDIO OUT
3
GND
E
7
+8VAud
7400
+8VAud
A
6
3524
AUDIO
3
DVD-Monoboard ........4-25 – 1 .............................4-29 – 2 .............................4-31 – 3 .............................4-33
TO HEADPHONE BOARD
1
GDV 200
F443 E4
3484 F7
F444 E11
3486 G4
F445 E12
3487 F7
F446 E13
3488 G7
F447 E13
3489 G4
F448 E1
3490 G8
F449 E5
3491 F12
F450 F6
3492 F13
F451 F6
13
GRUNDIG Service
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
Bedieneinheit / Keyboard Control Ansicht von der Bestückungsseite / View of Component Side
GRUNDIG Service
4 - 21
GRUNDIG Service
4 - 22
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
Bedieneinheit / Keyboard Control
– 1B............................4-17 Reference Oscillograms...............4-43 – 2 .............................4-19 A/V-MUX Board ..........4-13 Keyboard Control ..4-21/23 – 1A............................4-15
Keyboard Control +12V GND +5V Standby -40V
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
S
L
C
D VD
R
DIGITAL SURROUND SL
S
W
S
CHAPTER SCAN A-B
TITLE R
VCD
64
DVD-Monoboard 5 SCL 1
63
62
61
60
59
58
57
56
55
54
53
TRACK SHUFFLE REPEAT
52
51
50
49
48
47
46
45
44
FTS TOTAL CHAPTER
43
42
41
65
40
66
39
67
38
68
37
69
36
70
35
2
GND
71
34
3
SDA
72
33
4
STB_COUNT
73
32
5
SCL
74
31
75
30
76
29
77
28
78
27
79
26
80
25
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
3
2 1
A/V-MUX Board 1B
4 - 23
GDV 200
GRUNDIG Service
4 - 24 GRUNDIG Service
23
24
TRACK TITLE
TIME TRACK
1
DVD-Monoboard ........4-25 – 1 .............................4-29 – 2 .............................4-31 – 3 .............................4-33
– 4 .............................4-35 – 5 .............................4-37 – 6 .............................4-39 Power Supply ..........4-9/11
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
DVD-Monoboard Ansicht von der Bestückungsseite View of Component Side
GRUNDIG Service
4 - 25
GRUNDIG Service
4 - 26
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
GDV 200
DVD-Monoboard Ansicht von der Lötseite View of Solder Side
4 - 27
GRUNDIG Service
4 - 28
GRUNDIG Service
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
DVD-Monoboard – Signal-Prozessor, Laser- und Laufwerksteuerung DVD-Monoboard – Signal Processor, Laser and Drive Control 1
2
3
4
– 1B............................4-17 Reference Oscillograms...............4-43 – 2 .............................4-19 A/V-MUX Board ..........4-13 Keyboard Control ..4-21/23 – 1A............................4-15
5
6
7
8
9
10
11
12
DVD-Monoboard ........4-25 – 1 .............................4-29 – 2 .............................4-31 – 3 .............................4-33
13
7109 L78M09 1 3
+12Vstby
IN
47R
F11
F16 3188
3186
56p
1M
3190
F29
100p
680R
3112
12 VO2+
X2
100n
2R2
3126
47R
+3V3S
3118 470R
19
VO3+
18
VO3-
17
X2
MT
9101
22K +9V
C
F43
3127
GND3
29 30 MT1
14
3120
28 F51
3128
2R2
2R2
3131
3132
2R2
2R2
22K
+5Vx
22n
22K 2117
3151
10K
3155
10K
100n
2.0V F75
2R2
F
2122
F76
+5V
3152
100n
6
22R
F73
3149
12K +5A4
2118
E 2.5V
F67
3154
F70
12K 3146 10K 3150
7105-B MC34072 7
100R
F69
8
4
12K 3143
F72
5
3159
100R
F77
40 F78
38
F80
100n
1.5V 39K
3164
180p
2.0V
36
180p
3157
37
2125
F82
39
330R
NC5
NC6
NC7
NC8
VDDA3
RFP
22n
2115
100n
2114
47R
3133
VSSA3 RFN
F63
G
F92
NC4
SICL
SIDA
TD1 34 TDO FTC 33
LAND
F95
+5V
3165
3168
4R7
3172
82p
2135 F99
F98
F103
F102
3
22K
22K
100n 8 7105-A MC34072 1
F94 CALF_MACE
470K
3170
2
2130
3122
1R
3175
F113
3179
3169
1R
+5V
3174
H 2132
+5Vx 2128 100n
4
F105
2136
3177
47n
10K
4100
+3V3S
2144
I
10p
F107
F104
3178
X2
20 F37
VREF
MT2
X2
B
9100 3116
27K
470R
VIN3
GND2
100n VSSA2
R-EXT MUX
VDDD3
HEADER
NC2
15p
10K 3137
2.5V
F116
100K 2147
3114
STB_DALAS
+3V3D
3176
22p
TD2
F97
4
2R2
+ -
VOLTAGE CONTROL
F61
+5D
6
I
F62
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
F101
7104-B LM833D 7
16 DVD-REF
3182
8
HEADER
3181
5
LPF-DPD1
2129
+5V
2151
1
2149
22p
2
15p
3
15p
100K 2146
2150
F93
2R2
35
15 DVD-D F91
LPF-DPD2
FTC-REF
14 DVD-C
3163 270R
22n
4
13 DVD-B
270R
3167
2127
F90
3161 270R 270R 3162
4
5
NC1 12 DVD-A
F85
2
6
3158
O-CENTRAL
PUSH PULL OFFSET COMPENS. 3 BEAM TRACKING
DVD-MI
11
2148
F87
VSSA1
F100
F84
MUTE
DPD
LAND
8
12K
S2 41
VDDA1
100n
3
F60
44
43 VSSA4 S1 42
STB
10
100n 7104-A LM833D 1
O-D 45 VDDA4
VDDD5
2121
F79
9
3136
3138
SWAP
3166 2R2
2126
8 +5A1
100n
LAND/ GROOVE
7 CD-F
100R
2R2 3153
DIODE AMPLIFIERS PROCESSING
COO
+5V
F59
O-A 48
MUX
+5V
3160 27K
6 CD-E
3107
D
3135
O-B 47
COM
3173
100R
5 CD-REF
22n
F23
2R2
3106
+5V
O-C 46
2116
F89
220p
VAR GAIN
COP
F88
3199
3n3 F47
2124
4 CD-D
U308
2123
3 CD-C
F71
F53 1138
10K
F68
3148 100R
23 F26
3104
2R2
1.5V
SILD
F74
2 CD-B
100R 3145
100R
F
1 CD-A
VDDA2
F65 F108
MUX
2152 220n
3139 3142 100R
2110
100R
15p
100n
2119
+5V
24
2108 100n
LOGIC TRAY
64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49
CD-LO
F64
24
VIN4 BIAS -
MUTE
FWD
1M 2107
120p
2138
11 NC5
220R
7102 TZA1023
22 23
2113
F57
25
3103
+5A3
12K
3134
+5L
VDDL
4R7 F58
2109
CD-MI
91R
1R 3117
TM
3144
21
+5V
NC3
20 F111
+5V
3140
F56
100n
VIN5
680R
4n7
47u
2103
+5A2
3129
F55
19
TO DRIVE MECHANISM (SLEDGE MOTOR)
2139
2111
RF-REF
16
18
H
9 NC3
F15
26
+ -
3119
VSSD
15
F54
7
6 NC2
1M
F8
+
F28 7 MUTE
3191
+5V
180p 3171
F52
27
VO4+
F21 3 VIN1 - +
+5V
2R2
14
8
3113
13 VO2-
3125
13
F50
17
52207
2K2
+5L
F49
1102
F20
15 16 8
DVD-LO
TO DRIVE MECHANISM (PICK UP UNIT)
F46
X2
X2
F48
12
+3V3S
2K2
2140
F45
11
E
10K
3196
9 10
2 VOL+
100p 7108 BC847B
3193
3192
3K9
F44
8
3198
2143
F110
100n
10K 91R
VO4-
X2
47R
5 NC1
F35
7111 BC848B
F41
21 10 22
X2
GND1
3197
1 VOL-
4 VIN2
7107 BC847B
F31 F36
A
3141
F33
7110 BST82
3121
7
C
3189
F34
F32 F115
6 F38
+12Vstby
22K
F30
3195
F27
3
F22
2142
2
F25
2K2
4n7
1
100n 2141
F24
5
G
3108
3187
F19
1101
4
D
180R
330R
180R
3 7106 BFS20 2
F14 1
3115
1M 2137
5K6
2153 22p
B
F13
3111
3185
F18
F81
4
47R
+9V 2101 100n
7103 BA5938FM
3 7101 BFS20 2 3183
F61
3109
680R
8K2
3
2102
5K6
F9 F12
2104 15p
3102 680R
3130
3110
TRAYSW
2100 100n
F4
7100 BC847B
47p
F10
2
3184
F7
1
10K
3101
TO DRIVE MECHANISM (TRAY MOTOR)
1100
3105
F5
2105
F2
OUT
2
VCC3
F3
+5V
A
GND
VCC1
F1
VCC2
3194
REV
4R7
3100
+5V
3180
F106
27K
1
GRUNDIG Service
2
3
4
5
6
7
8
4 - 29
9
GRUNDIG Service
10
11
12
F1 A9 F2 A10 F3 A5 F4 A6 F5 A4 F6 A7 F7 A1 F8 A12 F9 A4 F10 A1 F11 A6 F12 A2 F13 A5 F14 A6 F15 B12 F16 B7 F18 B3 F19 B6 F20 B9 F21 B9 F22 B4 F23 B12 F24 B2 F25 B6 F26 B11 F27 B2 F28 B9 F29 B7 F30 B2 F31 B5 F32 C2 F33 C3 F34 C4 F35 C6 F36 C3 F37 C11 F38 C1 F41 C4 F43 C12 F44 C2 F45 C2 F46 C3 F47 D7 F48 D3 F49 D2 F50 D2 F51 D12 F52 D2 F53 D7 F54 D2 F55 D2 F56 E2 F57 E3 F58 E2 F59 E7 F60 E8 F61 E11 F62 E7 F63 E8 F64 E2 F65 E4 F67 F11 F68 F4 F69 F7 F70 F8 F71 F4 F72 F7 F73 F8 F74 F2 F75 F8 F76 F10 F77 F8 F78 G7 F79 G1 F80 G7 F81 B2 F82 G10 F84 G1 F85 G2 F87 G1 F88 F3 F89 F4 F90 G1 F91 G4 F92 G8 F93 H1 F94 I10 F95 H7 F97 H2 F98 H9 F99 H9 1100-1 A1 1100-2 A1 1100-3 A1 1100-4 B1 1101 B1 1102 G1 1138 D8 2100 A9 2101 A10 2102 A5 2103 A5 2104 A7 2105 A3 2107 B5 2108 B11 2109 E4 2110 D7 2111 D7 2113 E5 2114 E6 2115 E10 2116 F4 2117 E10 2118 F7 2119 F2
– 4 .............................4-35 – 5 .............................4-37 – 6 .............................4-39 Power Supply ..........4-9/11
2121 G4 2122 F10 2123 G8 2124 G8 2125 G10 2126 G2 2127 H3 2128 H6 2129 H5 2130 I6 2132 H10 2135 H9 2136 I9 2137 B6 2138 B6 2139 C6 2140 C5 2141 B3 2142 B3 2143 C4 2144 I10 2146 H2 2147 I2 2148 H3 2149 H4 2150 H3 2151 H4 2152 E2 2153 B3 3100 A4 3101 A2 3102 A6 3103 A12 3104 A12 3105 A4 3106 B12 3107 B12 3108 B5 3109 A7 3110 A3 3111 A5 3112 B6 3113 B9 3114 B12 3115 A6 3116 B12 3117 E4 3118 B12 3119 D7 3120 C12 3121 C1 3122 I5 3125 D5 3126 D6 3127 C12 3128 C13 3129 D6 3130 A4 3131 D12 3132 D13 3133 E5 3134 E5 3135 E7 3136 E8 3137 E8 3138 E8 3139 E3 3140 E2 3141 E10 3142 E3 3143 E8 3144 E1 3145 F3 3146 F8 3148 F3 3149 F8 3150 F7 3151 E10 3152 F8 3153 F3 3154 F10 3155 F10 3157 G8 3158 G3 3159 F10 3160 F1 3161 G3 3162 G3 3163 G3 3164 G10 3165 H8 3166 H6 3167 G2 3168 I7 3169 I5 3170 I7 3171 I6 3172 H10 3173 F3 3174 H9 3175 H9 3176 I2 3177 I9 3178 I2 3179 I5 3180 I10 3181 I5 3182 I5 3183 A8 3184 B4 3185 B4 3186 B7 3187 B4 3188 B7 3189 B5 3190 B6
3191 C6 3192 C5 3193 C5 3194 A5 3195 C4 3196 B4 3197 C4 3198 C4 3199 F3 4100 I8 7100 A4 7101 A7 7102 E4 7103 A10 7104-A G2 7104-B H2 7105-A H10 7105-B E11 7106 A7 7107 B6 7108 C6 7109 A9 7110 C3 7111 C4 9100 B12 9101 C13 F100 H5 F101 H5 F102 H5 F103 H6 F104 I2 F105 I2 F106 I2 F107 I10 F108 E4 F110 C2 F111 E1 F113 I7 F115 C2 F116 I5 U308 D6
13
4 - 30
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
DVD-Monoboard – Servo
– 1B............................4-17 Reference Oscillograms...............4-43 – 2 .............................4-19 A/V-MUX Board ..........4-13 Keyboard Control ..4-21/23 – 1A............................4-15
3
4
5
6
7
8
9
10
CSTCC +3A
B
3205
2205
10K
F213
125 F215
3206 100n
10K
3208
9
4K7
3210 3K9
2207 1n+3V3S
D
44
43
VddDp3
VssDp3
SICL
SINPHI
H5
28
H4
27
REFCOS
PCS
CLOCK GEN.
DEBUG
TEST
Port
p93-89
26 25
ACT_EMFN
H1|A17
24
F220
9202 127
XDET
H0|A16
23
F221
F223 72
SL
1
80
RP
F229 70
RA
81
4
Sledge control
Radial control
TL_FTL
FO
Port
ROM
2
Focus control
DEFOn
8051 core
Defect detector
DEFIn
2211 FTCH-L
3216
22n
E
FTCH
116
FTCL
79
3219 10K
3221
RAM
Track counter
OTD
Port 0
F252
3218
22K
F
F278
115
3217
+3V3S
B TRAYSW
F901
H3|CSBN
ACT_EMFP
F238 93 3215 92 10K
+3V3S
VddDp1 57
31 VssDp4
SILD
F214
3K9
2210 1n
5200
F204 32 VddDp4
F212
29
COSPHI
F236 71
3214
A
30
4K7 F235
2203 100n
VssDp2 95
11 VssDp5
VddDp2 96
12 VddDp5
21 VssDc2
VssDp6 68
22 VddDc2
VddDp6 69
109 VssAs
VssDc1 82
110 VddAs
VddDc1 83
119 VssAop
F205
F203 120 VddAop
F209
F208
F210 MON_D 73
MON_A 74
F207 CLKOUT 76
DEB_OUT 75
F201 TS3 103
F200
F206 99
2202 100n
H6
128
F232
3211
2201 100n
H7
126
3209
F228
+3A
+3A
+3A
REFSIN
2K7
2206 33n +3V3S
+3A
+3A
+3A
H2|CSDN
F217
C
8
D1|MIRN
107
D2|TLN
108
D3|REN
111
D4|FEN
F260
112
S1
F263
113
S2
SFR Signal cond.
Dx
F224
51
F225
A13
50
F227
A12
49
F230
A11
48
7620
A10
47
F233
A9
46
F234
A8
45
F237
C +5V +5V 7201 74HCT573D 1 11
AD7
65
F239
AD6
64
F241
AD5
63
F243
AD4
62
F245
AD3
61
F247
AD2
60
F249
AD1
59
F251
58
AMD(0:7) AMD(0:7) AMD(7)
EN
Vcc
C1
GND
20
2208
10
100n
1 9 F909
AM(0)
12
AMD(1)
AM(1)
11
AMD(2)
4
1 7 F907
AM(2)
10
AMD(3)
5
1 6 F906
AM(3)
9
AMD(4)
6
1 5 F905
AM(4)
8
AMD(5)
7
1 4 F904
AM(5)
7
AMD(6)
8
1 3 F903
AM(6)
6
AMD(7)
9
1 2 F902
AM(7)
5
AM(8)
27
AMD(3)
AMD(2)
AMD(1)
AMD(0)
F256
AM(9)
26
F259
AM(10)
23
F261
AM(11)
25
AM(12)
4
AM(13)
28
AM(14)
29
AM(15)
3
AM(16)
2
53 F257 9204
DSDen
78
3220
RSTI
98
10K
10K F264
3223 11K
NC2
3
NC3
36
NC4
37
30
DQ0
A1
DQ1
A2
DQ2
A3
DQ3
A4
DQ4
A5
DQ5
A6
DQ6
A7
DQ7
AMD(3)
18
AMD(4)
19
AMD(5)
20
AMD(6)
21
AMD(7)
+5VC
A9
RESET_
A10
CE_
A11
OE_
A12
WE_
1 22 24 31
F262
4 - 31
2
3
4
5
6
+3V3S
A14 A15 A16 A17
G
+3V3S
INT2
+5V
6200 F283 BAS216 3234 8K2
+3V3S 2214 22n
2216 1n BC857B 7203 3232 2R2 3235 100K
3227 4K7
H
F279
3229 12K
F282 F288
2215 22u
1201
I
+3A
F292
{CFR,SUR,RXD_BE,TXD_BE}
7
GRUNDIG Service
8
9
4 - 32
F
A13
{ALE,PSENn,RDI,WRI,CSI,WE,OTD-HD61,POR,PORN,RSTN,INT,MOTO1,RFo,T1,T2,T3}
1
E
+3V3S +3V3S
F291 9210
F298 TXD_BE
RXD_BE
AMD(2)
17
NC8 101
4K7 10K
10K 3238
F296
3228
SUR
CFR
F295
9208
9209 F294
F293
F289
PB 4229 DVD-COMBI JBE-DIG.BOARD 3104 123 4229.5
F290
STBY
AMD(1)
15
NC7 100
3236
p93-89
AMD(0)
14
16
F287
F286
SIDA
13
VSS
O-CENTRAL
4200
3230 10K
p93-89
3231 10K
ATIP_IN
D
A8
67
NC6
F276 13
INT3|ALEh
14
PXT1
18
PXT2en
WRNH
19
15
RDNH
20
PXT2
RXD1
33
PXT0
TXD1
F297 34
17
INT0_PWD
F273 35
F274 16
INT1
RXD2
39
TXD2
40
F272 38
RDN
WRN
TPWM
84
41
TEN
85
42
FOK
CLO
+5V
F285
3226 10K +5V
I
2
+3V3S
F284
from 7200-18 +3V3S
87
9206
F281
P6
104
3225 270K
F269
IREFT
VRH
105 F277
LLP
ALPHAO
3224 2213 150R 100n
114
ATIP_IN
H
F266
94
2212 100n
118
F267
10K
117
3237 +3A
LDON
ATIPin Uopt
77
NC1
VCC A0
NC5
F271 86
OPC
OPC_INT
PW
SRV_INT_LGR
124
4
G
Port 1
Port 3
Port 5
P6
88
CALF
89
123 CALF_MACE
ADC/ AGC ref.
Laser control
I2CSCL
A2
90
122
I2CSDA
A1
91
121
F270 97
F265
Uopb
3222 11K
AM(0:17)
1 8 F908
1D
2209
100n 7202 Am29F002B 32
2
AMD(4)
55 F900 9205
3213 4R7 +5VC
3
AMD(5)
F254
3212 4R7
AMD(0) AMD(6)
54
EAn
interface
F222
52
PSENn
System
9203
A14
ALE
Ex
AM(0:17)
A15
AD0
106
14
+3A
2204 100n
3202 +3A 2R2
3201 2R2
TS2 102
5
RAC_SW
TS1
6 F211 XXTLO
XTLI
10
7
7200 SAA7399
2200 100n
SELPLL
F202
A
1M 3204 330R
13
+3V3S
+3V3S
9200
3200 10K
3203
12
+3V3S +3V3S
1200
11
100MHZ
2
DVD-Monoboard ........4-25 – 1 .............................4-29 – 2 .............................4-31 – 3 .............................4-33
VssDp1 56
1
GDV 200
10
11
12
13
14
– 4 .............................4-35 – 5 .............................4-37 – 6 .............................4-39 Power Supply ..........4-9/11 1200 A4 1201 I13 2200 A4 2201 A6 2202 A7 2203 A10 2204 B2 2205 B2 2206 C1 2207 D1 2208 D13 2209 D14 2210 D1 2211 E1 2212 H3 2213 H4 2214 H13 2215 H11 2216 H12 3200 A4 3201 A6 3202 A7 3203 A4 3204 A4 3205 B2 3206 B2 3208 C2 3209 C2 3210 C2 3211 D2 3212 D13 3213 D14 3214 D2 3215 D2 3216 E2 3217 E2 3218 E2 3219 F2 3220 F10 3221 F2 3222 F1 3223 F2 3224 H3 3225 H5 3226 H4 3227 H13 3228 I7 3229 H13 3230 H8 3231 H6 3232 H12 3234 I11 3235 I12 3236 H9 3237 H2 3238 I8 4200 H8 5200 A9 6200 H12 7200 A3 7201 D12 7202 D13 7203 H12 7620 D11 9200 A5 9202 C2 9203 C10 9204 F10 9205 F10 9206 H5 9208 I7 9209 I7 9210 I8 F200 A5 F201 A5 F202 A4 F203 A6 F204 A9 F205 A7 F206 A5 F207 A5 F208 A5 F209 A5 F210 A6 F211 A4 F212 B10 F213 B2 F214 B10 F215 B2 F217 B2 F220 C10 F221 C10 F222 C11 F223 C2 F224 C11 F225 C11 F227 C11 F228 C1 F229 C2 F230 C11 F232 D2 F233 D11 F234 D11 F235 D1 F236 D2 F237 D11 F238 D2 F239 D10 F241 D10 F243 E10 F245 E10 F247 E10 F249 E10 F251 E10 F252 E2 F254 E10 F256 F10
F257 F10 F259 F11 F260 F2 F261 F11 F262 F14 F263 F2 F264 F10 F265 G2 F266 H4 F267 H3 F269 H5 F270 H4 F271 H6 F272 H7 F273 H8 F274 H9 F276 H9 F277 H4 F278 E2 F279 H14 F281 H6 F282 H13 F283 H12 F284 H7 F285 H7 F286 H8 F287 I11 F288 I12 F289 I6 F290 I6 F291 I8 F292 I12 F293 I7 F294 I7 F295 I7 F296 I7 F297 H8 F298 I8 F900 F10 F901 B10 F902 E13 F903 E13 F904 E13 F905 E13 F906 E13 F907 E13 F908 D13 F909 D13
CL96532111_005.eps 071099
GRUNDIG Service
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
DVD-Monoboard – Decoder
1
– 1B............................4-17 Reference Oscillograms...............4-43 – 2 .............................4-19 A/V-MUX Board ..........4-13 Keyboard Control ..4-21/23 – 1A............................4-15
2
3
4
6
5
7
8
9
10
11
12
13
3300 F320 2300 CSTCC
+5V
F321
1300
F326
+5V 22K
23 PORE
3304
F333
22
+5VB
+5VB
F322
+5VB
19
17
VSSD9
VSSD8
VDDD9
VSSD7
VDDD8
VSSD6
VDDD7
VSSD5
VDDD6
VSSD4
VDDD5
VSSD3
VDDD4
VSSD2
VDDD3
VDDD2
VDDD1
2304 F332 3 REFLO 2305
3K3 3306
3305 2K7
22n
F335 4 REFHI
22n
6 HFIN
16
15p
BIT DETECTOR
DEMOD
9300
10K
AMD(0:7)
41 DA1
RDA2 68
F329
12 I|O1 11
RDA3 67
F330
10
RDA4 66
F331
9
RDA5 65
F334
8
RDA6 64
F336
7
RDA7 63
F337
6
F338
4
RAD1 75
F339
3
RAD2 76
F341
2
RAD3 77
F342
1
RAD4 78
F343
26
RAD5 79
F344
25
RAD6 80
F345
24
RAD7 83
F346
23
RAD8 84
F347
RAD9 85
F348
RAD10 87
F349
39 DA3 37 DA4 35 DA5 34 DA6 33 DA7 46 WRI RAD11 88
F350
RAD12 89
F351
RAD13 90
F352
RAD14 91
F372
CFLG
NC9
WCLK
BCLK
DATA
FLAG
SYNC
V4
EBUOUT
SERIAL OUT INTERFACE
STOPCLK
T1
T2
NC8
NC7
MEAS1
CL1
NC6
INT
SCL
TACHO BLOCK
B
21
A14 A13 A12 A11 A10 A9
C
A8 A7 A6 A5 A4 A3 A2
D
A1 A0 GND
14
E
F363
F362
F361
F360
3311 22K
F359
9201
F358
F391
F353
F390
F356
F354
+5V
F
B_WCLK
B_BCLK
B_DATA
B_V4
100n
B_FLAG
3313 4K7
3312 4K7
B_SYNC
2309
F
1300 A6 1301 G12 2300 A10 2301 A7 2302 A4 2303 A4 2304 B4 2305 C4 2306 C2 2307 C2 2309 F6 2310 G10 2311 H11 2312 H11 2313 H12 2314 H7 2315 I8 2316 C4 2317 B3 3300 A10 3301 A6 3302 A6 3304 B2 3305 C3 3306 C3 3309 C4 3310 E4 3311 F6 3312 F5 3313 F5 3314 G8 3315 G8 3316 G8 3317 G8 3318 H6 3319 H12 3320 H6 3321 H11 3322 H8 3323 H8 3324 I8 3325 I11 3326 I12 3327 I11 3328 I11 3329 I12 3330 B4 3331 B4 5300 A7 5301 A4 6301 G7 6302 G7 6303 G6 7304 G11 7310 A10 7311 A5 7312 I12 7315 H6 9300 C4 9301 E5 9313 H8 9314 C4
38 27 28 29 30 42 26 97 51 13 15 62 17 18 50 52 53 54 55 56 57 58 69 96 86
F355
9301
NC5
36 NC4
SDA
22K
BCAIN
49 CSI
MOTO2|T3
3310 +5V
MOTO1
MOTOR INTERFACE
48 ALE
E
I|O2
– 4 .............................4-35 – 5 .............................4-37 – 6 .............................4-39 Power Supply ..........4-9/11
NC10
47 RDI
I|O3
I|O0
RAD0 74
SUB-CPU INTERFACE
I|O4
F328
40 DA2
D
I|O5
RDA1 70
12 OTD
43 DA0
I|O6
RDA0 71
13
A
I|O7
F327
15
20
OE_
RRW 61
5
F340 8 AGCOUT
WE_ CE_
F325
3309 F371 2 IREF
2316
C
ANALOG DATA CAPTURE
5 VREF
1K8 9314
DETECTOR
22p
18
94 10 11 19 20 31 32 44 45 59 60 72 73 81 82 92 93 98 99 VSSD1
95
100n
VCC
27
100n +5VB
25 NC3 2317 F382 3331
2307 22n
+5VB
22 TEST2
2K7
2306 10u
+5VB
CLOCK GENERATION CONTROL
21 TEST1 +5VA
F324
NC2 24 MUXSW
7 VSSA2 CROUT
NC1
16
3330
VSSA1
14
9 VDDA2
7311 SAA7335 100 1 VDDA1
2303 47u
+5VB
3302 220R
+5VA 2302 100n
B
1M
+5VA
2301
100MHZ +5VB
3301 +5VA
CRIN
F323
A
+5V
100MHZ
5301
5300
4R7 28
7310 CY7C199
+5VB
+5V
DVD-Monoboard ........4-25 – 1 .............................4-29 – 2 .............................4-31 – 3 .............................4-33
+5V +5V 2310
S1D
S1D
+5V 6303
6301
3316 1R
3315 1R
3317F366 1R
6302
+12Vstby
27 26
7304 BA6856FB
100n
VCC
VM2
DRIVER GAIN CONTROL
VM1
S1D
3
A2
5
A1
7
NC1
1
NC2
2
H1+
9
24
4K7
3318
- +
F370 F373
U310
H
STBY
3320
7315 BC847B
4K7
F375
9313
F376
F377 2314 100n
3322 4K7
3323 4K7 3324 100K
F378 2315 100n
+5V F384
I
F387
REV
REV
23
PS
22
EC
21
+ ECR -
20
CNF
19
VH
18
FG1
17
FG2
16
FG3
+ + -
PS
+ + -
H BIAS
1301
A3
H1-
10
NC3
4
NC4
6
H2+
11
H2-
12
F365
10 F368
9 NOT MOUNTED
2311 100n
2312 100n
+ -
MT2
MT1
GND
30
29
8
NC5
7 6
F369
3319 U3095
F374
47R
4
3321 6K8
3
1
13
H3-
14
3327 6K8
3326 47R
F383
6K8 F386
3328 F388 22K
F389
H
2
F379 F380
15
H3+
8
2313 100n
3325 + -
G
11 F367
TO DRIVE MECHANISM (DISC MOTOR)
3314 1R
28 RNF
52207
F385
G
F381
25 F364
I 7312 BC857B
3329 22K +5V +5V
1
GRUNDIG Service
2
3
4
5
6
7
8
4 - 33
9
GRUNDIG Service
10
11
12
13
4 - 34
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
DVD-Monoboard – Speicher / Memory
1
2
GDV 200
– 1B............................4-17 Reference Oscillograms...............4-43 – 2 .............................4-19 A/V-MUX Board ..........4-13 Keyboard Control ..4-21/23 – 1A............................4-15
3
4
5
6
7
8
9
10
11
12
DVD-Monoboard ........4-25 – 1 .............................4-29 – 2 .............................4-31 – 3 .............................4-33
13
– 4 .............................4-35 – 5 .............................4-37 – 6 .............................4-39 Power Supply ..........4-9/11
14
MEMORY PART A
A
NOT USED
SYSTEM DATA Bus SYSTEM ADDRESS Bus
B
B RAM/ROM Interface
VDD_MEM VDD_MEM
SDRAM Interface
2401 2400 100n
5 6 7 8 9 10
I|O16
I|O2
I|O15
I|O3
I|O14
I|O4
I|O13
VCC2
VSS2
I|O5
I|O12
I|O6
I|O11
I|O7
I|O10
I|O8
I|O9
11
NC1
F
NC4
12
NC2
13 14
16 17 18
G
19
WE_
UCAS_
RAS_
OE_
15 NC3
A8
A0
A7
A1
A6
A2
A5
A3
A4
VCC3
VSS1
38 37
I|O7 I|O8 I|O9 I|O10 I|O11
36
I|O12
35
11
34
12
33
32
NC1
I|O13
NC2
I|O14
NC3
I|O15
32
RAS_
31
LCAS_
30
UCAS_
29 28 27
WE_ OE_
8
A4
8
9
A5
7
10
A6
6
33
AD7 AD8
31
AD9
32
AD10
20
AD11
19
DQ0
2
DQ1
3
DQ2
5
DQ3
6
DQ4
8
DQ5
9
DQ6
11
DQ7
12
DQ8
39
DQ9
40
DQ10
42
VDD_MEM
DQ11
43
DQ12
45
39
A12
39
40
A13
38
A14
37 36
A16
35
A17
34
A18
3
A19
2 43 F419 12 14 3407
24 23
44 1
3408
33
22
D6
A6 DQ6 A7 DQ7 A8 DQ8 A9 DQ9 A10 DQ10 A11 DQ11 A12 DQ12 A13 DQ13 A14 DQ14 A15 DQ15|A-1
30
D7
16
D8
18
D9
20
D10
22
D11
25
D12
27
D13
29
D14
31
D15
A16 A17 A18 A19 CE_ OE_ WE_ RESET_ BYTE_
21
13 32
VDD_MEM
3410
4 - 35
5401
4
5
VDD_MEM2
6
7
GRUNDIG Service
8
4 - 36
46
DQ14
48
DQ15
49
DQML
14
DQMU
36 F420
100u
2420
2419
100u
3
DQ13
3413
F422
100MHZ
22
30
40
3406
28
AD1
29
41
A11
3405 F400
D5
28
A10
38
A20
D4
26
AD6
36
29
24
21
AD5
42
13
DQ5
AD0
27
A9
30
DQ4 A5
D3
AD4
35
31
A4
D2
21
10K
2
100n
100n
100n
7404 MT48LC1M16A1TG-7S
24
4
A15
DQ3
D1
19
AD3
A8
14
DQ2 A3
17
23
34
41
DQ1 A2
D0
AD2
5
A7
A1
15
VDD_MEM2
1
2416
100n
C
9
34
CLK
35
WEN
15
CSN1
18
CASN
16
RASN
17
1
25 7
7405 MT48LC1M16A1TG-7S
13 38 44 AD0
21
AD1
22
AD2
23
AD3
24
A4
AD4
27
A5
AD5
28
A6
AD6
29
A7
AD7
30
A8
AD8
31
A9
AD9
32
A10
AD10
20
A11
AD11
19
DQ0
DQ0
2
DQ1
DQ1
3
DQ2
DQ2
5
DQ3
DQ3
6
DQ4
DQ4
8
DQ5
DQ5
9
DQ6
DQ6
11
DQ7
DQ7
12
DQ8
DQ8
39
DQ9
DQ9
40
DQ10
DQ10
42
DQ11
DQ11
43
DQ12
DQ12
45
DQ13
DQ13
46
DQ14
DQ14
48
DQ15
DQ15
49
26
DQML
14
50
DQMU
36
A0 A1 A2
NC1
A3 NC2
LDQM
GND1
UDQM
GND2 GNDQ1
CLK
GNDQ2
WEN
GNDQ3 GNDQ4
CASN RASN
10
37
4
CKE
CSN
33
11
3404 VDD_MEM2
34
10
CLK
35
41
WEN
15
47
CSN1
18
CASN
16
RASN
17
12
A0
1
25 7
D
13 38 44 VCCQ4
9
25
+3V3
2415
VCCQ3
A3
22 37 42
VDD_MEM
2416
VCCQ1
7
DQ0
VDD_MEM
100MHZ
100n
2415
VCCQ2
10
F402
+3V3
2412
100n
VCC1
A2
H
I
2411
100n
VCC2
5
26
F403
2412
100n
VCCQ4
A1
3411
5400
2411
VCCQ3
I|O6
4
3409
20
LCAS_
39
I|O5
100n
100n 7401 Am29LV160BT 23 11 VCC A0
3
10K
4
E
I|O1
40
I|O4
VSS3
3
VSS3
VSS2
2
VCC1
VSS1
1
I|O3
2405
100n
VCCQ1
7403 HYB314175BJ
I|O2
2404
100n
VCCQ2
D
I|O1
2
2405
100n
VCC1
3403
I|O0
2404
VCC2
3402
2410
21 100n
VSS2
VCC1
VDD_4MB
100n
6
VSS1
2409
VDD_MEM
2408 7400 GM71V18163CJ 1 17 A0 18 A1 19 A2 F404 20 A3 F405 23 A4 24 A5 25 A6 26 A7 27 A8 28 A9 16 A10 15 A11
VCC3
3401
VDD_MEM2
VDD_MEM2
100n
VCC2
VDD_MEM
GND_4MB
100n
C
2403
3400
2402
3412 U313
100n
2400 C3 2401 B6 2402 C3 2403 C6 2404 C10 2405 C11 2406 C13 2407 C14 2408 C6 2409 C3 2410 C8 2411 C10 2412 C11 2413 C13 2414 C14 2415 D10 2416 D11 2417 D13 2418 D14 2419 I2 2420 I6 3400 C4 3401 C4 3402 D4 3403 D4 3404 D12 3405 F7 3406 G7 3407 G7 3408 G7 3409 G7 3410 H7 3411 H7 3412 H7 3413 I9 5400 I1 5401 I6 7400 C5 7401 C7 7403 D2 7404 D10 7405 D12
A1 A2
NC1
A3 NC2
33 37
A4 A5
E
A6 A7 A8 A9 A10 A11
F
DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6
G
DQ7 DQ8 DQ9 DQ10 DQ11 DQ12 DQ13
H
DQ14 DQ15
26
LDQM
GND1
UDQM
GND2
50 4
CKE
GNDQ1
CLK
GNDQ2
WEN
GNDQ3
CSN
GNDQ4
10 41 47
I
CASN RASN
13
14
CL96532111_008.eps 071099
GRUNDIG Service
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
DVD-Monoboard – Prozessor und Decoder / Processor and Decoder
4
5
6
7
8
9
10
11
12
14
13
RWN
F525
CAS0ND CAS1ND
F527 F529
CE_FLASHN F531 F533 CE_ROMN RAS0ND OEND
RXD_SER
9501 SERVICE
RTS_SER
F500
5
YC6
YC4 YC5
YC3
YC2
YC0
6 7
YC5
11
3505
68R
F580
100p
10K
10K 3504 10K
3508
12
F508
22n
10K 2505
14 15
YC7
VSYNC
F589 3522 10K
3520 F588 10K
PORT 2 I/O
PORT 3 I/O
PORT 4 I/O
3K3
IRQ1
23 IRQ0
TEST5
F519
3K3 3523
25
3517
TEST
JTAG
RAS1n_OR_HOLDREQ READNOTWRITE_OR_DMAACK WE0n WE1n CAS0n_OR_HOLDACK CAS1n_OR_DMAREQn CE1n CE2n
C
19
F509
20
30 31 32 F702 33 41 TEST1 TEST2 TEST3 TEST4
TRSTn
TDO TMS
18
3521 10K
F578 F579
F577
TCK TDI TDO TMS TRSTN 188 186 189 187 190 TCK TDI
191 192 193 194 195 196 197 14 PIO-4|0 PIO-4|1 PIO-4|2 PIO-4|3 PIO-4|4 PIO-4|5 PIO-4|6 PIO-4|7
17
HSYNC
21
27M_CLK1
22 VDD_STI
23 24 3524
RESERVED
24
IRQ
uP ST20cpu
VSSA_PCM
50
VREF_PCM
49
DECODER
MPEG1/2
CE3n CSn RAS0n_OR_CE4n OEn
43 44 45 46 47
SCLK PCM_OUTO PCM_CLK LRCLK SPDIF_OUT
AUDIO
LPCM
VDD_STI 3545
48
2508
10K
3n3
E F524 F526
F528 F703 F530 F532
Audio MPEG
demultiplexer
3527 10R
B_OUT C_OUT CVBS_OUT Y_OUT
ENCODER
DECODER
57 56 55 63 64 62
R_OUT G_OUT
VIDEO
Video
VDD_STI
F537 F538 F539 F540 F541
V_REF_DAC_RGB
I_REF_DAC_YCC
I_REF_DAC_RGB
58
66
59 15K 680R
5503
F555 3535 3538
F554
F553 10K 330R
27M_CLK
HSYNC
4u7
100n
2527 100n 7504 FXO-31FT 4 VDD 1 3 TS OUT OSC GND
2 100R
27M_CLK
4u7
2531
2530
VDD_STI
VDD_STI
VDD_STI
VDD_STI
VDD_STI
VDD_STI
VDD_STI
VDD_STI
CLK DQML DQMU
CSN1 CSN2 CASN RASN WEN
2529
+5V
BLM21
V_REF_DAC_YCC
OSD_ACTIVE
PIXCLK_27MHz
65 F552 3534
27M_CLK
3537
117
HSYNCn 51
118
ODD_OR_EVEN 52 VSYNC
F551
VSSA2 61
2u2 2528 VDD_STI
OSD_ACTIVE
VDDA2
VSSA1
60
54
F550
VDDA1 53
2u2 5502
2526 100n
2525 100n
2524 100n
2523 100n
2522 100n
2521 100n
2520 100n
F549
VDD17
GND17
208
GND14 160
200
VDD14 159
GND16
GND13 150
VDD16
VDD13 149
184
GND12 140
185
VDD12 139
VDD15
GND11 131
GND15
VDD11 130
171
GND10 120 2519 100n
F561 F562 F563
F556 F557 F558 F559 F560
172
VDD10
3533 F548
119
SDCASn SDRASn SDWEn MEMCLKIN MEMCLKOUT DQML DQMU
SDCS0n SDCS1n
84 85 89 88 90 104 76 91 105
DQ10 DQ11 DQ12 DQ13 DQ14 DQ15
DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DQ8 DQ9
2518 100n VDD_STI
VDD_STI 5501
100n
AD0 AD1 AD2 AD3 AD4 AD5 AD6 AD7 AD8 AD9 AD10 AD11
SDRAM Interface
92 93 94 97 98 99 100 101 106 107 108 109 112 113 114 115
GND9 111
AD3 AD4 AD5 AD6 AD7 AD8 AD9 AD10 AD11
VDD9 110
AD0 AD1 AD2
GND8 103
VDD_STI
78 79 80 81 69 70 71 72 73 74 82 83
VDD8 102
VDD_STI
VDD_STI
2517 100n
VDD7
GND7
95
96 2516 100n
VDD6
GND6
GND5 77
86
VDD5 75
87 2515 100n
GND4 68 2513 100n
VDD_STI
VDD_STI
2514 100n
VDD4 67
GND2 19
SDRAM CONTROLLER DATA
DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DQ8 DQ9 DQ10 DQ11 DQ12 DQ13 DQ14 DQ15
FRONT-END VDD2 18
2511 100n VDD_STI
VDD_STI
I
VDD3
GND1 4 2510 100n
VDD1
H
ADDRESS GND3
B_V4
F547
Subpicture decoder
Subpicture
2
IS
34
F546
B_DATA B_WCLK B_BCLK B_FLAG B_SYNC
35
F545
36 40 37 38 39 42
2512 100n
F544
3531 10R 3532 10R
F542
VDD_STI
F543
1
3530 10R
Interface
3528 10R 3529 10R
3536 100R F564 F565
3539 3543
27M_CLK1
HSYNC
1
GRUNDIG Service
F
12.2896MHz
A/V/Sub
G
D
220R
3525
F523
AC3
PCMout1
100R F522
2506
PORT 1 I/O
B
13
YC6
3509
3503
9 10
VDD_STI
VDD_STI 2504 10K
F517 3513
F575 F516
F515
F513
F514
F576
PIO-3|0 PIO-3|1 PIO-3|2 PIO-3|3 PIO-3|4 PIO-3|5 PIO-3|6 PIO-3|7
207 2
VDD_STI
OSLINKIN OSLINKOUT CPUreset CPUanalyse ErrorOUT 4K7
3540 10K F799
201 202 203 204 205 206
3519
YC4
16
F401 F591 F592 F593 F594 F512
F510 RSTN
SERVICE 9522 F598
3 5 6 7 8 PIO-2|0 PIO-2|3 PIO-2|4 PIO-2|5 PIO-2|7
VDD_STI
9507
9506
9504
9505
9503
9502
VDD_STI
9514
F572 F566
F571
9512 9513
9511
F570
F569 9510
F568
F567 9508
8
VDDA_PCM
PORT 0 I/O
A
4
F506 F521
PIO-0|0 PIO-0|3 PIO-0|4 PIO-0|5 PIO-0|6 PIO-0|7
9509
2533
3541 100R
YC7 SEL_ACLK1
FLASH_OEN F574 9516 F583
9 10 198 199 11 12 13
15 16 17 20 21 22
F587
F585
F586
3514 10K 3515 10K 3516 VDD_STI 10K SEL_ACLK2
28 27 26 29 116 136 137 134 138 BRM2 BRM1_OR_BOOTFROMROM BRM0_OR_OSLINK_SEL RSTn AUXCLK READY PPC_CLK DMAXFER PPCn_MODE
ADR14 ADR15 ADR16 ADR17 ADR18 ADR19 ADR20 ADR21
9517 FLASH_OEN F520 F581 9518 DEEM0 F582 9519 DEEM1 PCMout2 F701 9520 MUTE
100n RESETN
4u7
2503
2502
VDD_STI F599 F700
173 174 175 176 177 178 179 180 181 182 183 ADR11 ADR12 ADR13
ADR4 ADR5 ADR6 ADR7 ADR8 ADR9 ADR10
161 162 163 164 165 166 167 168 169 170
3
YC1
DATA2 DATA1 DATA0
3526 10K
F
F534 F535
128 133 121 122 129 132 124 125 126 135 127 123
3
SYSTEM USE
MEMORY interface
4
2
2
3
4
5
6
7
8
4 - 37
9
GRUNDIG Service
10
11
12
13
14
{SCLKo,PCM_OUTO,PCM_CLK,LRCLKo,SPDIF_OUT,R_OUT,G_OUT,B_OUT,C_OUT,CVBS_OUT,Y_OUT,X1}
E
DATA7 DATA6 DATA5 DATA4 DATA3
5
NC
1
YC0
2509
148 147 146 145 144 143 142 141
D7 D6 D5 D4 D3 D2 D1 D0
ADR1 ADR2 ADR3
RAM/ROM Interface
F600
F597
D8 D9 D10 D11 D12 D13 D14 D15 DATA8 DATA9 DATA10 DATA11 DATA12 DATA13 DATA14 DATA15
D
151 152 153 154 155 156 157 158
7503 STi5505
3511
SYSTEM DATA Bus
C
A11 A12 A13 A14 A15 A16 A17 A18 A19 A20
A1 A2 A3 A4 A5 A6 A7 A8 A9 A10
SYSTEM ADDRESS Bus
RESET_ IN
PIO-1|0 PIO-1|2 PIO-1|3 PIO-1|4 PIO-1|5 PIO-1|6 PIO-1|7
3K3
3501
SCL
7502 MC33464N
52207-2290 1506
YC3
9521
22K
3502
7501 BC847B
1 VDD_STI 2
F518 3K3 F584
F507
10K
3K3
F505
3506
STB_CONT
3512
4 5
100p
OS_BOOT
F504
3
SDA
4K7
2
F502
100p
3507
1
+5Vstby 2501
3K3
F503
+5Vstby
3500
TO/FROM KeyboardControl (J4)
B
1501
7505 ST24E32M6 8 100n 1 VCC E0 2 E1 3 5 E2 SDA 6 SCL 7 WC_ VSS STB_CONT 4 P50
2532
F573
YC2
3542 100R
F501 2500
SDA SCL
VDD_STI
+5Vstby
TXD_BE RXD_BE
I2C Bus
100p
A
YC1
BASIC ENGINE INTERFACE Bus
CTS_SER
TXD_SER
OSD_ACTIVE
NC
3
100n
2
DVD-Monoboard ........4-25 – 1 .............................4-29 – 2 .............................4-31 – 3 .............................4-33
10u
1
– 1B............................4-17 Reference Oscillograms...............4-43 – 2 .............................4-19 A/V-MUX Board ..........4-13 Keyboard Control ..4-21/23 – 1A............................4-15
2507
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
330p
GDV 200
G
H
I
– 4 .............................4-35 – 5 .............................4-37 – 6 .............................4-39 Power Supply ..........4-9/11
1501-1 B1 1501-2 B1 1501-3 B1 1501-4 B1 1501-5 B1 1506-1 A14 1506-10 B14 1506-11 B14 1506-12 B14 1506-13 B14 1506-14 B14 1506-15 B14 1506-16 C14 1506-17 C14 1506-18 C14 1506-19 C14 1506-2 A14 1506-20 C14 1506-21 C14 1506-22 C14 1506-23 D14 1506-24 D14 1506-3 A14 1506-4 A14 1506-5 A14 1506-6 A14 1506-7 A14 1506-8 A14 1506-9 B14 2500 A2 2501 B5 2502 B6 2503 B6 2504 C11 2505 B12 2506 D14 2507 D14 2508 E14 2509 E14 2510 I3 2511 I3 2512 I4 2513 I4 2514 I4 2515 I4 2516 I5 2517 I5 2518 I5 2519 I9 2520 I9 2521 I9 2522 I10 2523 I10 2524 I10 2525 I11 2526 I11 2527 I13 2528 I11 2529 I11 2530 I11 2531 I11 2532 A7 2533 B8 3500 B3 3501 B3 3502 A5 3503 B11 3504 B11 3505 B11 3506 B4 3507 B5 3508 B11 3509 B11 3511 C6 3512 C6 3513 C11 3514 C6 3515 C6 3516 C6 3517 C13 3519 C9 3520 C11 3521 C12 3522 C12 3523 D13 3524 D14 3525 E14 3526 F2 3527 G1 3528 G1 3529 G1 3530 G1 3531 G1 3532 G1 3533 H8 3534 I12 3535 I13 3536 I14 3537 I12 3538 I13 3539 I13 3540 C9 3541 B7 3542 B8 3543 I12 3545 D14 5501 H11 5502 I11 5503 H13 7501 B5 7502 B7 7503 D2 7504 I13 7505 A2 9501 A10 9502 B10
9503 B10 9504 B10 9505 B10 9506 B10 9507 B11 9508 B9 9509 B9 9510 B9 9511 B9 9512 B9 9513 B9 9514 B10 9516 C7 9517 C7 9518 C7 9519 C7 9520 C7 9521 C8 9522 C8
CL96532111_009.eps 071099
4 - 38
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
GDV 200
DVD-Monoboard – Audio/Video
2
3
4
5
6
7
8
9
10
11
12
13 1602
5600
SERVICE
F655
+5V
7
BLM21
+5V
SERIAL PC INTERFACE
2600 U311 22n
GND
3640
14
13
F661
SCKO4 13
X X
3632
432R
2615
68p
3631
2614
432R
2617
68p
2616
432R
68p
3661
2621
68p
2620
3647
432R
6K8
3635
3607
100K
1n5
2602 3636
3609 CVBS
6
F639
+5V
-8Vstby
1K
G F642
3662 +5V
-8Vstby
1604
1K
1
3657
432R
68p
2623
68p
2622
432R
3648
X X X
-8Vstby
5607
3650
7617 BC847B
SCKO1 12
F650
3654
432R
9
C_VID
10
SDA
11
+6Vstby
-8Vstby
13
7618 BC847B
F645 F653
14
Y_VID 15
3658
-8Vstby
16
1K
1
4 - 39
2
3
4
5
6
7
GRUNDIG Service
8
4 - 40
9
10
11
12
H
12
+3V3
F651 22u
9316
1K
8
SCL +12Vstby
3659 +5V
5608
3653
Y_OUT
3656
22u
SCKO2 14 F662 9315
6 7
-8Vstby NOT USED IN MONOBOARD FOR DVD2A (RGB) & (Y/C)
F648
4 5
F649
+5V F647
2 3
F652 PCMout2
3660
PCMout1
SCKO3 17
F663
HSYNC
1K
C_OUT
MCKO 10
F654
F646
X X
F
3
3663
X X
2625
COUNTER Q
MONO DVD2A Y/C MONO DVD2B GDV MODUL 1
68p
VDD
3641 3644 3645 3646 3649 3652
GND
VDDB
100n 4
MONO DVD2A RGB
TO/FROM PC INTERFACE
1n5
2601
F602
10K
15
B_VID
7615 BC847B
432R
RES
18
5
1K
7614 BC847B
22u
MCKO_ 11 9
F631
E
2
5606
3646
68p
PLL1
14
G_VID
F644
2627
5 XT2 OSC
I
16 15 3
COUNTER P PLL2
3645
F643
2624
6 XT1
F630
-8Vstby
+5V
7613 BC847B
5605
3644
2R2
MODE CONTROL I/F
18 RST_
1 16
F641
F640
G_OUT
3652
1 ML
SEL_ACLK2
432R
MOUNTING DEPENDS ON TYPE/VERSION SEE TABLE
3649
20 MC
F628 F629
+3V3S
GNDB
19 MD
19
F636
3626
22u F536
3641
ITEM
D
R_VID
7612 BC847B
5604
3643
CVBS_OUT
7
20
F627
F638
F637
2630 8
LRCLK
3603
+5VOSC
GNDP
+3V3S SEL_ACLK1
432R
3602
3668
VDDP
100n
100R
22u
27M 9
2631
2 MODE
3665
SCLK
F625
F635
22u
100n +5VOSC 7619 PLL1700
3625
5602
X1
H
22
21
B_OUT
47u 2629
17
3600
11
2628
330R
22R +5V
6
GND2
12
F634
F633
+2
5
3617
11
R_OUT
GND1
47K
12
OUTPUT 13_5M 10 BUFFER OUTPUT BUFFER
4K7
SPDIF_OUT
7
F619 +5V
3667 100R
68p
G
3622
F659
9
3651
3 X1
100u
7
10
3604 CLOCK BUFFER/ CRYSTAL OSCILL.
100u 2606
6
LRCLKo
OUTPUT 3_68M 14 BUFFER
CLOCK SYNTHESIS
2 X2
100u 2632
22K
PCM_CLK
3601
OUTPUT PCLK BUFFER
100K
22n
2605
100R 3624
68p
ACLK
F607
3627
470R
3623
F658
3633
CLOCK SYNTHESIS AND CONTROL CICUITRY
1 PS2
F595
5
432R
F
3
4
NOT USED OUTPUT BUFFER
15 PS0 16 PS1
2
F632
CLOCK SYNTHESIS AND CONTROL CICUITRY
10 7
PCM_OUTO
68p
13
9
+5V MUTE_AV
SCLKo
VDD2
11
4
68p
4 VDD1
+5V -8Vstby
10K 3666
C
8 +5Vstby
F623
3664
100n
68R
100n
3639
7616 MK2742
+5VOSC 2619
F622
3655
+5VOSC 2618
PCM_CLK
1603 0_6_12V
13
432R 2626
10K
3605
VDD_MEM2
100n +5VOSC
8
6
TO A/V MUX BOARD (1300)
VDD_STI
F624
8 AS0
+5VOSC
F611
3618 15
2613
10K
-8Vstby
3615
B
U6
3611
9
100n
1 VDD_MEM
100n B_FLAG
2610
100u
2611
2612 VDD_STI
3
22K 7611 74HCT365D 16 & VCC
4
3K3
7610 BC847B
F656
100MHZ
3637
+5V
3619 +5V
7608 BC857B
7609 BC857B
F621
VDD_STI
CFLG
2
2633
100u
2607
DEEM1
5601
NC
F616
VDD_STI
DEEM0
U7
F613 BAT254
MUTE
H602
F620
100MHZ BLM31
1
H601
3
-8Vstby
F614
6600
U8
5
+5Vstby
F617 H603 H600
100R
+5V
A
1
-8Vstby 3621
7
3629 F618 3606
+12Vstby
1605
12 AS1
220R
100R
STB_CONT
+3V3
SEL_ACLK1
470R
7
0_6_12V
F615
-8Vstby
10
+5VOSC
3630
4
7600-D 74HCT14D 14 8
CTS_SER 3628
10K
F612
5610
E
10K
47u
3614
9
5603
7607 BC847B
SCART0
8
14 3
7600-B 74HCT14D
100u
+6Vstby
3642
7
2604
F590
BLM21
RTS_SER
10K
2
U9
3610
5
7
+5V
7
7
VDD_STI
+5Vstby
2609
5
12
+5V
F606
10K F608
6
PH-B
+5V
+5V
4
11
D
RXD_SER
11
7604 BC847B
SCART1
3
FROM POWER SUPPLY (0205)
C
3613
7600-E 74HCT14D 14 10
13
100R
+5V
7600-C 74HCT14D 14 6
3608
1
2
10u
2608
1
B
+3V3S
GND
F603
OUT
F605
10K
IN
1600
7600-F 74HCT14D 14 12
+12Vstby
VDD_STI 2
7
10K 3616
7605 LD1117 3
7600-A 74HCT14D
+5V
+5V
+3V3
3612
2603
100n
F604
100K
5609 100MHZ BLM31
2
6K8
1
TXD_SER
3620
F601
14
F609
A F610
DVD-Monoboard ........4-25 – 1 .............................4-29 – 2 .............................4-31 – 3 .............................4-33
TO A/V MUX BOARD (1301)
1
– 1B............................4-17 Reference Oscillograms...............4-43 – 2 .............................4-19 A/V-MUX Board ..........4-13 Keyboard Control ..4-21/23 – 1A............................4-15
I
– 4 .............................4-35 – 5 .............................4-37 – 6 .............................4-39 Power Supply ..........4-9/11 1600 B2 1602-1 A13 1602-2 A13 1602-3 A13 1602-4 B13 1602-5 B13 1602-6 B13 1602-7 A13 1603-1 E13 1603-10 C13 1603-11 C13 1603-12 D13 1603-13 D13 1603-14 E13 1603-15 E13 1603-16 E13 1603-17 D13 1603-18 E13 1603-19 E13 1603-2 F13 1603-20 E13 1603-21 F13 1603-22 D13 1603-3 F13 1603-4 D13 1603-5 F13 1603-6 F13 1603-7 D13 1603-8 C13 1603-9 C13 1604 G13 1605 D1 2600 A12 2601 A13 2602 B13 2603 A2 2604 B3 2605 C8 2606 D9 2607 C2 2608 B3 2609 C2 2610 D6 2611 D2 2612 D3 2613 E3 2614 F9 2615 F10 2616 G9 2617 G10 2618 E2 2619 E3 2620 G9 2621 G10 2622 H9 2623 H10 2624 I9 2625 I9 2626 I9 2627 I9 2628 G2 2629 H2 2630 H3 2631 H2 2632 D9 2633 D9 3600 F6 3601 F6 3602 F6 3603 F6 3604 F6 3605 E1 3606 C10 3607 B12 3608 B11 3609 C12 3610 A13 3611 B13 3612 B6 3613 B6 3614 C6 3615 C11 3616 D12 3617 D12 3618 D8 3619 D9 3620 A13 3621 B13 3622 C9 3623 E11 3624 E11 3625 E11 3626 F11 3627 B7 3628 C7 3629 D10 3630 C8 3631 F9 3632 F10 3633 G9 3635 B13 3636 C13 3637 C11 3639 E3 3640 E4 3641 G6 3642 C6 3643 F8 3644 G8 3645 G8 3646 H8 3647 G9 3648 H9 3649 H8 3650 I8 3651 I9 3652 I8
3653 I8 3654 I9 3655 I10 3656 I10 3657 H10 3658 I10 3659 I10 3660 H11 3661 G10 3662 G11 3663 G11 3664 G10 3665 E11 3666 D11 3667 E11 3668 G3 5600 A13 5601 D5 5602 F10 5603 E1 5604 F10 5605 G10 5606 H9 5607 I9 5608 I9 5609 A2 5610 D2 6600 C9 7600-A A11 7600-B B11 7600-C A12 7600-D B12 7600-E A9 7600-F A8 7604 B7 7605 A3 7607 B6 7608 C11 7609 C10 7610 D10 7611 D5 7612 F11 7613 F11 7614 G10 7615 H10 7616 E1 7617 I10 7618 I10 7619 H1 9315 I4 9316 I4
13
GRUNDIG Service
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
DVD-Monoboard – Messpunkte / Test Points Ansicht von der Lötseite View of Solder Side
GRUNDIG Service
4 - 41
GRUNDIG Service
4 - 42
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
GDV 200
Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams
GDV 200
Oszillogramme / Oscillograms
Ch1 200mV~
M 1.00ms
Ch1 500mV~
F24: RAD+
Ch1 200mV~
M 100ns
F53: RFO
Ch1 200mV~
M 2.00ms
Ch1 2V~
Ch1 2V~
CH1 200mV~
M 20µs
CH1 200mV~
M 20µs
CH1 200mV~
TP5: C_ENC
TP6: Y_ENC
Ch1 2V~
CH1 2V~
CH1 2V~
CH1 2V~
CH1 2V~
M 2.00ms
M 500ns
M 10.0µs
TP8: LRCLK
TP9: SCLK
Ch1 2V~
Ch1 2V~
Ch1 2V~
CH1 2V~
CH1 2V~
CH1 2V~
M 100ns
F628: SCLK
M 10.0µs
F631: LRCLK
Ch1 200mV~ F653: Y_VID
1
1
Ch1 20mV~ F642: B_VID
Ch1 200mV~ F645: C_VID
M 20.0µs
M 20.0µs
M20.0µs
CH1 200mV~
TP4: CVBS
TP7: PCM_OUT
M 50.0ns
M 20µs
TP3: video R
F365, F367, F368: A1…A3
Ch1 2V~
M 20.0µs
M 50.0ns
M 50.0ns
F45, F49, F50, F52: DIODES OUT
F361: B_BCLK
Ch1 2V~
Ch1 200mV~ F639: G_VID
M 2.00ms
Ch1 100mV~
M 1.00ms
F281, F384, F387: T1…T3
F390: CL1
M 20.0ns
Ch1 200mV~
F32: RAD -
F369, F374, F379, F380, F383, F386: H1…H3
F630: PCM_CLK
M 100µs
F30: FOC +
M 100ns
M 100ns
M 500ns
M 100ns
M 20µs
M 100ns
TP10: PCM_CLK
M 500ns
CH1 200mV~
M 10ms
F629: PCM_OUT0
TP11: DIG_OUT
TP12: PCM_OUT2
TP13: PCM_OUT1
TP14: ANALOG OUT DAC (PINK NOISE)
Ch1 200mV~ F636: R_VID
M 20.0µs
CH1 200mV~
CH1 1V~
CH1 200mV~
CH1 500mV~
Ch1 200mV~
M 20.0µs
F646: CVBS
M 10ms
M 500µs
M 200ns
M 20µs
TP15: ANALOG OUT AUDIO CHINCH (PINK NOISE)
TP16: ANALOG OUTPUT AUDIO HP_R & HP_L
TP18: DIGITAL OUT
TP19: CVBS_OUT
CH1 50mV~
CH1 500mV~
CH1 5V~
CH1 5V~
M 20µs
TP20: Y_OUT
TP21: C_OUT
CH1 5V~
CH1 500mV~
M 20µs
M 50µs
TP22: SCL (I2C)
M 50µs
TP23: SDA (I2C)
0V
0V
Ch1 2V~
Ch1 2V~
M 20.0ns
Ch1 100V
M 20.0ns
F703: 48kHz Audio Clock
F703: 44.1kHz Audio clock
M 5µs
Ch1 1V
M 5µs
M 20µs
MP1: T7125 — Drain
MP2: T7125 — Gate
TP24: HSYNC
CH1 200mV~
CH1 200mV~
CH1 500mV~
M 20µs
CH1 500mV~
M 20µs
TP25: RO (COLOUR SETUP HI)
TP25: RO (COLOURSETUP LO)
CH1 500mV~
CH1 500mV~
CH1 500mV~
M 20µs
TP26: GO (COLOURSETUP HI)
0V
0V Ch1 200mV
M 5µs
MP3: IC7110-(10) 4 - 43
Ch1 200mV
M 5µs
MP4: T7125 — Source
TP1: video B
M 20µs
M 20µs
M 20µs
TP26: GO (COLOURSETUP LO)
TP2: video G GRUNDIG Service
4 - 44
M 20µs
TP27: BO (COLOURSETUP HI)
M 20µs
TP27: BO (COLOURSETUP LO) GRUNDIG Service
GDV 200
1 GRUNDIG Service
Explosionszeichnungen und Ersatzteillisten Exploded Views and Spare Parts Lists
Explosionszeichnungen und Ersatzteillisten / Exploded Views and Spare Parts Lists
5-1
Ersatzteilliste Spare Parts List
DVD
10 / 2000
GDV 200 MATERIAL-NR. / PART NO.: 758678100000 BESTELL-NR. / ORDER NO.: GMH7800
POS. NR. ABB. POS. NO. FIG.
MATERIAL-NR. ANZ. PART NUMBER QTY.
BEZEICHNUNG
DESCRIPTION
d
©
758678100000
GDV 200 KEIN E-TEIL
GDV 200 NO SPARE PART
0001.000 0007.000 0050.000 0070.000 0082.000
759880455800 759880428200 759880456100 759880455100 759880454200
0151.000 0251.000 0252.000 0301.000 0318.000 1001.000 1005.000
759880456000 759540271400 759540271400 759540299300 759880455900 759880454700 759880454400
FRONTPLATTE KPL (MIT BEDIENPLATTE) MONOPLATTE V9.XX SENSOR LT125A MONOPLATTE LAUFWERK CD KPL. (OHNE MONOPLATTE) DECKEL FUSS SCHWARZ FUSS SCHWARZ NETZKABEL FERNBEDIENUNG TP80V AUDIO/VIDEO PLATTE NETZTEIL KPL. 30PS203/00
FRONT PANEL (WITH CONTROL BOARD) MONOBOARD V9.XX SENSOR LT125A MONOBOARD DRIVE MECHANISM CD CPL (WITHOUT MONOBOARD) COVER FOOT BLACK FOOT BLACK POWER CABLE REMOTE CONTROL TP80V AUDIO/VIDEO BOARD POWER SUPPLY ASSY 30PS203
BEDIENUNGSANLEITUNG D/GB BEDIENUNGSANLEITUNG F/NL BEDIENUNGSANLEITUNG S/DK BEDIENUNGSANLEITUNG E/P BEDIENUNGSANLEITUNG I/FIN SERVICE MANUAL D/GB
OPERATING INSTRUCTION D/GB OPERATING INSTRUCTION F/NL OPERATING INSTRUCTION S/DK OPERATING INSTRUCTION E/P OPERATING INSTRUCTION I/FIN SERVICE MANUAL D/GB
X = SIEHE GESONDERTE E-LISTE
X = SEE SEPARATE PARTS LIST
S S
720105404000 720105404100 720105404200 720105404300 720105404400 720105380000
X
2 2
MATERIAL-NR. BEZEICHNUNG PART NUMBER DESCRIPTION
POS. NR. POS. NO.
MATERIAL-NR. BEZEICHNUNG PART NUMBER DESCRIPTION
S
759880454400
NETZTEIL KPL. 30PS203/00
IC 07110
759880448700
IC MC44603AP
00009 00101 01120 01125
759880452600 759880424000 831562150300 759880450600
SICHERUNGSHALTER NETZBUCHSE SI 5X20 T2,5A H 250V FUNKENSTRECKE DSP-501N-A2
T 07125
759880451500
TRANS STP4NA60FI
L 05120 L 05131 L 05210 L 05230 L 05233 L 05240 L 05259
759875388300 759880450500 759880452500 759880454800 759880454800 759880454900 759880454800
NETZ-FILTER SPULE 100MHZ SPULE 6.8UH 20% 7.7X9.5 SPULE 10UH 10% 4X9,8MM LA SPULE 10UH 10% 4X9,8MM LA SPULE 1UH 20% 4X9,8MM AXI SPULE 10UH 10% 4X9,8MM LA
IC 07200 IC 07201 IC 07233 IC 07236 IC 07237
759880451600 759880451700 759880448900 759880451800 759880451700
IC CQY80NG IC KA431LZTA IC LM7805CT IC STP16NE06 IC KA431LZTA
D 06110 D 06111 D 06114 D 06120 D 06129 D 06132 D 06210 D 06230 D 06250 D 06260
759880502600 759880502600 759875389500 759880424800 759880447900 759875389500 759880451300 759880451300 759875389500 759880502600
DIODE BYD33J DIODE BYD33J DIODE BYD 33 D DIODE S1NB80 DIODE BZX84-C24 DIODE BYD 33 D DIODE PBYR1080 DIODE PBYR1080 DIODE BYD 33 D DIODE BYD33J
S S S
759880454700
AUDIO/VIDEO PLATTE/BOARD
01300 01301 01303 01304 01400 01400 01402 01405
759880423200 759880449500 759880449600 759880438400 759880449700 759880449700 759880449800 759540503300
STECKER 22POL. VERBINDER FLEX. 16P BUCHSE Y/C OUT EUROBUCHSE H 42P F BUCHSE MULTICHANNEL AUDIO BUCHSE MULTICHANNEL AUDIO CINCH BUCHSE STEREO OUT CHINCH-BUCHSE H 1P F
D 06301 D 06302
759540209000 759540209000
SMD-DIODE BAS 216 0805 SMD-DIODE BAS 216 0805
ÄNDERUNGEN VORBEHALTEN / SUBJECT TO ALTERATION
GDV 200
GRUNDIG Service
POS. NR. POS. NO.
Explosionszeichnungen und Ersatzteillisten / Exploded Views and Spare Parts Lists
5-2
ǵ
2
MATERIAL-NR. BEZEICHNUNG PART NUMBER DESCRIPTION
D 06303 D 06400
759540209000 759880449900
SMD-DIODE BAS 216 0805 OPT SEN GP1F32T
T 07304 T 07305
830100484700 830100484700
SMD TRANS BC847B SMD TRANS BC847B
IC 07104 IC 07316 IC 07400 IC 07401 IC 07403 IC 07408 IC 07412 IC 07413 IC 07414
759880449300 830533478000 759880452200 759880452300 759880420400 759880420400 759880437400 759880452400 720086586800
IC ROM SLAVE IC TDA4780V3/ V4 IC LD1117DT33 SMD-IC UDA1328 T IC MC33079D IC MC33079D SMD-IC UDA 1328 T/N1 IC 74HC4053N IC LM 833 D
759540502100
DIGITAL AUSGANGSTRAFO
T 07300 T 07301 T 07302 T 07306 T 07307 T 07308 T 07309 T 07310 T 07311 T 07312 T 07313 T 07314 T 07315 T 07320 T 07321 T 07322 T 07324 T 07325 T 07326 T 07327 T 07328 T 07329 T 07330 T 07331 T 07332 T 07333 T 07334 T 07335 T 07336 T 07337 T 07402 T 07404 T 07405 T 07406 T 07407 T 07409 T 07410 T 07411 T 07415 T 07416 T 07419 T 07420 T 07421 T 07422 T 07423
830100485600 830100484700 830100484700 830100484700 830100484700 830100484700 830100484700 830100484700 830100484700 830100485600 830100484700 759880437300 759880437300 830100484700 759880437300 830100484700 759880437300 830100484700 830100485600 830100484700 830100484700 830100484700 830100484700 830220022300 830100485600 830327332700 830100484700 830100484700 759880437300 759880437300 830100681700 830100681700 830100681700 830100681700 830100681700 759880437300 759880437300 759880437300 759880437300 759880437300 759880437300 759880437300 759880437300 830220055700 830100484700
SMD-TRANS.BC 856 B SMD TRANS BC847B SMD TRANS BC847B SMD TRANS BC847B SMD TRANS BC847B SMD TRANS BC847B SMD TRANS BC847B SMD TRANS BC847B SMD TRANS BC847B SMD-TRANS.BC 856 B SMD TRANS BC847B TRANS SM BC817-25 TRANS SM BC817-25 SMD TRANS BC847B TRANS SM BC817-25 SMD TRANS BC847B TRANS SM BC817-25 SMD TRANS BC847B SMD-TRANS.BC 856 B SMD TRANS BC847B SMD TRANS BC847B SMD TRANS BC847B SMD TRANS BC847B TRANS BC547B SIE/PHI SMD-TRANS.BC 856 B TRANS BC327-25 SMD TRANS BC847B SMD TRANS BC847B TRANS SM BC817-25 TRANS SM BC817-25 SMD-TRANS.BC 817-40 SMD-TRANS.BC 817-40 SMD-TRANS.BC 817-40 SMD-TRANS.BC 817-40 SMD-TRANS.BC 817-40 TRANS SM BC817-25 TRANS SM BC817-25 TRANS SM BC817-25 TRANS SM BC817-25 TRANS SM BC817-25 TRANS SM BC817-25 TRANS SM BC817-25 TRANS SM BC817-25 TRANS BC557B SIE/PHI/TFK SMD TRANS BC847B
5-3
Es gelten die Vorschriften und Sicherheitshinweise gemäß dem Service Manual "Sicherheit", Mat.-Nummer 720108000000, sowie zusätzlich die eventuell abweichenden, landesspezifischen Vorschriften!
ǵ
MATERIAL-NR. BEZEICHNUNG PART NUMBER DESCRIPTION
Ersatzteilliste Spare Parts List
DVD
8 / 2000
LAUFWERK CD DRIVE MECHANISM MATERIAL-NR. / PART NO.: 759880454200
POS. NR. ABB. POS. NO. FIG.
0002.000 0003.000 0004.000 0011.000 0014.000 0017.000 0018.000 0019.000 0021.000 0032.000 0033.000 0034.000 0041.000
! (!)
The regulations and safety instructions shall be valid as provided by the "Safety" Service Manual, part number 720108000000, as well as the respective national deviations. ÄNDERUNGEN VORBEHALTEN / SUBJECT TO ALTERATION
MATERIAL-NR. ANZ. PART NUMBER QTY.
BEZEICHNUNG
DESCRIPTION
d
©
759880454200
LAUFWERK CD KPL(OHNE MONOPLATTE) DRIVE MECHANISM (WITHOUT MONO BOARD)
759880454000 759880452800 759880453000 759880429100 759880451300 759880453200 759880453300 759880453400 759880453600 759880453700 759880453800 759880453800 759880453900
LASEREINHEIT KPL MOTOR DC MIT PULLY SCHALTER LASEREINHEIT KPL VSD7A50P DIODE PBYR1080 RIEMEN ZAHNRAD ZAHNRAD SCHUBLADE FEDER STIFT STIFT PLATTE
Es gelten die Vorschriften und Sicherheitshinweise gemäß dem Service Manual "Sicherheit", Mat.-Nummer 720108000000, sowie zusätzlich die eventuell abweichenden, landesspezifischen Vorschriften!
! (!)
LASER UNIT ASSY MOTOR DC SWITCH LASERUNIT ASSY VSD7A50P40 DIODE PBYR1080 BELT WHEEL WHEEL TRAY SPRING PIN PIN PLATE
The regulations and safety instructions shall be valid as provided by the "Safety" Service Manual, part number 720108000000, as well as the respective national deviations. ÄNDERUNGEN VORBEHALTEN / SUBJECT TO ALTERATION
Explosionszeichnungen und Ersatzteillisten / Exploded Views and Spare Parts Lists
L 05400
POS. NR. POS. NO.
GDV 200
GRUNDIG Service
POS. NR. POS. NO.
Kundendienst Deutschland
KUNDENDIENST NORD Kolumbusstr. 14
22113 Hamburg
Tel. 0 40/7 33 31-248 Fax 0 40/7 33 31-333
KUNDENDIENST OST Wittestr. 30e
13509 Berlin
KUNDENDIENST WEST
Tel. 0 30/4 38 03-21 Fax 0 30/4 32 55 97
Horbeller Str. 19 50858 Köln
Tel. 0 22 34/95 81-281 Fax 0 22 34/95 81-278
KUNDENDIENST MITTE Dudenstr. 45-53
68167 Mannheim
Tel. 06 21/33 76-230 Fax 06 21/33 76-251
KUNDENDIENST SÜD Beuthener Str. 65
90471 Nürnberg
Tel. 09 11/7 03-12 61 Fax 09 11/7 03-11 27
Kundendienst Europa
GRUNDIG NEDERLAND B. V. Gebouw Amstelveste Joan Muyskenweg 22 NL-1096 CJ Amsterdam 00 31-20-5 68 15 68
B-1930
GB
EIR
GRUNDIG BELUX N.V. Deltapark, Weihoek 3, Unit 3G Zaventem 00 32-2-7 16 04 00 GRUNDIG UK LTD. Elstree Way, Borehamwood, Herts, WD6 1RX Großbritannien/Great Britain 00 44-1 81-3 24 94 00 Technical Service Unit 35. Woodside Park, Wood Street Rugby, Warwickshire, CV21 2NP Großbritannien/Great Britain 00 44-1 78-8 57 00 88 GRUNDIG IRELAND LTD. 2 Waverley Office Park, Old Naas Road Dublin 12 0 03 53-1-4 50 97 17
GRUNDIG FRANCE S.A. 5 Boulevard Marcel Pourtout F-92563 Rueil Malmaison Cedex 00 33-1-41 39 26 26
P-1495
GRUNDIG PORTUGUESA Comércio de Artigos Electrónicos, Lda. Rua Bento de Jesus Caraça 17 1495 Cruz Quebrada, Lisboa 0 03 51-1-4 15 67 00
GRUNDIG SCHWEIZ AG Steinacker Str. 28 CH-8302 Kloten 00 41-1-8 15 81 11
GRUNDIG NORGE A. S. Glynitveien 25, Postboks 234 N-1402 Ski 00 47-64 87 82 00 GRUNDIG DANMARK A/S Lejrvej 19 DK-3500 Værløse 00 45-44 48 68 22 GRUNDIG OY Luoteisrinne 5 FIN-02271Espoo 0 03 58-98 04 39 10 GRUNDIG SVENSKA AB Albygatan 109 d, Box 4050 S-17104 Solna 00 46-8-6 29 85 30 GRUNDIG POLSKA SP.Z.O.O. Ul. Czéstochowska 140 PL-62800 Kalisz 00 48-62-7 66 77 70
A-1120
GRUNDIG AUSTRIA Ges.m.b.H. Breitenfurter Straße 43-45 Wien 00 43-1-81 11 76 03
GRUNDIG ITALIANA S.P.A. Via G.B. Trener, 8 I-38100 Trento 00 39-04 61-89 31 11 GRUNDIG ESPAÑA S.A. Solsonés, 2 planta baja B3 Edificio Muntadas (Mas Blau) E-08820 El Prat De Llobregat (Barcelona) 00 34-93-4 79 92 00