Feb 23, 2006 - Remove and install using injector line wrench 3035. Always remove complete set of lines. Do not bend, kink or alter shape. 23 - Vacuum pump.
Note: When installing an exchange cylinder head complete with installed camshafts, oil the contact surfaces between lifters and cam lobes before installing valve cover. Do NOT remove the plastic packing pieces which protect the open valves until immediately before installing the cylinder head. If the cylinder head is replaced, replace the entire engine coolant mixture.
1 - Toothed belt guard - upper part 2 - Toothed belt Mark direction of rotation before removing Check for wear Do not kink Removing and installing, adjusting
Checking cylinder head for distortion Max. permissible distortion: 0.1 mm Note: Reworking diesel cylinder heads is not permitted.
Cylinder head gasket identification Replacement part No. = - arrow 1 Holes = - arrow 2 Production control code = - arrow 3 - disregard Note: Different thicknesses of cylinder head gasket are installed depending on the piston projection dimension. When replacing the cylinder head gasket, install a new gasket with the same identification.